An issue was discovered in the Linux kernel through 5.16-rc6. uapi_finalize in drivers/infiniband/core/uverbs_uapi.c lacks check of kmalloc_array().
In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty() may cause a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because, since the tracepoint was added in mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, nilfs_grab_buffer(), which grabs a buffer to read (or create) a block of metadata, including b-tree node blocks, does not set the block device, but instead does so only if the buffer is not in the "uptodate" state for each of its caller block reading functions. However, if the uptodate flag is set on a folio/page, and the buffer heads are detached from it by try_to_free_buffers(), and new buffer heads are then attached by create_empty_buffers(), the uptodate flag may be restored to each buffer without the block device being set to bh->b_bdev, and mark_buffer_dirty() may be called later in that state, resulting in the bug mentioned above. Fix this issue by making nilfs_grab_buffer() always set the block device of the super block structure to the buffer head, regardless of the state of the buffer's uptodate flag.
In the Linux kernel, the following vulnerability has been resolved: fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super When configuring a hugetlb filesystem via the fsconfig() syscall, there is a possible NULL dereference in hugetlbfs_fill_super() caused by assigning NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize is non valid. E.g: Taking the following steps: fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC); fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0); fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced with NULL, losing its previous value, and we will print an error: ... ... case Opt_pagesize: ps = memparse(param->string, &rest); ctx->hstate = h; if (!ctx->hstate) { pr_err("Unsupported page size %lu MB\n", ps / SZ_1M); return -EINVAL; } return 0; ... ... This is a problem because later on, we will dereference ctxt->hstate in hugetlbfs_fill_super() ... ... sb->s_blocksize = huge_page_size(ctx->hstate); ... ... Causing below Oops. Fix this by replacing cxt->hstate value only when then pagesize is known to be valid. kernel: hugetlbfs: Unsupported page size 0 MB kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0 kernel: Oops: 0000 [#1] PREEMPT SMP PTI kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0 kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28 kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004 kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000 kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004 kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000 kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400 kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0 kernel: Call Trace: kernel: <TASK> kernel: ? __die_body+0x1a/0x60 kernel: ? page_fault_oops+0x16f/0x4a0 kernel: ? search_bpf_extables+0x65/0x70 kernel: ? fixup_exception+0x22/0x310 kernel: ? exc_page_fault+0x69/0x150 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: ? hugetlbfs_fill_super+0xb4/0x1a0 kernel: ? hugetlbfs_fill_super+0x28/0x1a0 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: vfs_get_super+0x40/0xa0 kernel: ? __pfx_bpf_lsm_capable+0x10/0x10 kernel: vfs_get_tree+0x25/0xd0 kernel: vfs_cmd_create+0x64/0xe0 kernel: __x64_sys_fsconfig+0x395/0x410 kernel: do_syscall_64+0x80/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? exc_page_fault+0x69/0x150 kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76 kernel: RIP: 0033:0x7ffbc0cb87c9 kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48 kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af kernel: RAX: fffffffffff ---truncated---
In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is received on HIP08 devices The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel...
In the Linux kernel, the following vulnerability has been resolved: tipc: Check the bearer type before calling tipc_udp_nl_bearer_add() syzbot reported the following general protection fault [1]: general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087] ... RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291 ... Call Trace: <TASK> tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367 netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b The cause of this issue is that when tipc_nl_bearer_add() is called with the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called even if the bearer is not UDP. tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that the media_ptr field of the tipc_bearer has an udp_bearer type object, so the function goes crazy for non-UDP bearers. This patch fixes the issue by checking the bearer type before calling tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions. In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it. Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced. Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_core_get NULL dereference It is possible for clk_core_get to dereference a NULL in the following sequence: clk_core_get() of_clk_get_hw_from_clkspec() __of_clk_get_hw_from_provider() __clk_get_hw() __clk_get_hw() can return NULL which is dereferenced by clk_core_get() at hw->core. Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups") the check IS_ERR_OR_NULL() was performed which would have caught the NULL. Reading the description of this function it talks about returning NULL but that cannot be so at the moment. Update the function to check for hw before dereferencing it and return NULL if hw is NULL.
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE.
In the Linux kernel, the following vulnerability has been resolved: ipmr: fix kernel panic when forwarding mcast packets The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/kn ---truncated---
In the Linux kernel, the following vulnerability has been resolved: HID: nvidia-shield: Add missing null pointer checks to LED initialization devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. [jkosina@suse.com: tweak changelog a bit]
In the Linux kernel, the following vulnerability has been resolved: tracing/timerlat: Move hrtimer_init to timerlat_fd open() Currently, the timerlat's hrtimer is initialized at the first read of timerlat_fd, and destroyed at close(). It works, but it causes an error if the user program open() and close() the file without reading. Here's an example: # echo NO_OSNOISE_WORKLOAD > /sys/kernel/debug/tracing/osnoise/options # echo timerlat > /sys/kernel/debug/tracing/current_tracer # cat <<EOF > ./timerlat_load.py # !/usr/bin/env python3 timerlat_fd = open("/sys/kernel/tracing/osnoise/per_cpu/cpu0/timerlat_fd", 'r') timerlat_fd.close(); EOF # ./taskset -c 0 ./timerlat_load.py <BOOM> BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 2673 Comm: python3 Not tainted 6.6.13-200.fc39.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:hrtimer_active+0xd/0x50 Code: 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 57 30 <8b> 42 10 a8 01 74 09 f3 90 8b 42 10 a8 01 75 f7 80 7f 38 00 75 1d RSP: 0018:ffffb031009b7e10 EFLAGS: 00010286 RAX: 000000000002db00 RBX: ffff9118f786db08 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9117a0e64400 RDI: ffff9118f786db08 RBP: ffff9118f786db80 R08: ffff9117a0ddd420 R09: ffff9117804d4f70 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9118f786db08 R13: ffff91178fdd5e20 R14: ffff9117840978c0 R15: 0000000000000000 FS: 00007f2ffbab1740(0000) GS:ffff9118f7840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 00000001b402e000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? srso_alias_return_thunk+0x5/0x7f ? avc_has_extended_perms+0x237/0x520 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? hrtimer_active+0xd/0x50 hrtimer_cancel+0x15/0x40 timerlat_fd_release+0x48/0xe0 __fput+0xf5/0x290 __x64_sys_close+0x3d/0x80 do_syscall_64+0x60/0x90 ? srso_alias_return_thunk+0x5/0x7f ? __x64_sys_ioctl+0x72/0xd0 ? srso_alias_return_thunk+0x5/0x7f ? syscall_exit_to_user_mode+0x2b/0x40 ? srso_alias_return_thunk+0x5/0x7f ? do_syscall_64+0x6c/0x90 ? srso_alias_return_thunk+0x5/0x7f ? exit_to_user_mode_prepare+0x142/0x1f0 ? srso_alias_return_thunk+0x5/0x7f ? syscall_exit_to_user_mode+0x2b/0x40 ? srso_alias_return_thunk+0x5/0x7f ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f2ffb321594 Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 cd 0d 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 3c c3 0f 1f 00 55 48 89 e5 48 83 ec 10 89 7d RSP: 002b:00007ffe8d8eef18 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 00007f2ffba4e668 RCX: 00007f2ffb321594 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 00007ffe8d8eef40 R08: 0000000000000000 R09: 0000000000000000 R10: 55c926e3167eae79 R11: 0000000000000202 R12: 0000000000000003 R13: 00007ffe8d8ef030 R14: 0000000000000000 R15: 00007f2ffba4e668 </TASK> CR2: 0000000000000010 ---[ end trace 0000000000000000 ]--- Move hrtimer_init to timerlat_fd open() to avoid this problem.
In the Linux kernel, the following vulnerability has been resolved: net: ice: Fix potential NULL pointer dereference in ice_bridge_setlink() The function ice_bridge_setlink() may encounter a NULL pointer dereference if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently in nla_for_each_nested(). To address this issue, add a check to ensure that br_spec is not NULL before proceeding with the nested attribute iteration.
In the Linux kernel, the following vulnerability has been resolved: vfio/fsl-mc: Block calling interrupt handler without trigger The eventfd_ctx trigger pointer of the vfio_fsl_mc_irq object is initially NULL and may become NULL if the user sets the trigger eventfd to -1. The interrupt handler itself is guaranteed that trigger is always valid between request_irq() and free_irq(), but the loopback testing mechanisms to invoke the handler function need to test the trigger. The triggering and setting ioctl paths both make use of igate and are therefore mutually exclusive. The vfio-fsl-mc driver does not make use of irqfds, nor does it support any sort of masking operations, therefore unlike vfio-pci and vfio-platform, the flow can remain essentially unchanged.
In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix a NULL pointer dereference A NULL pointer dereference is triggered when probing the MMIO RAPL driver on platforms with CPU ID not listed in intel_rapl_common CPU model list. This is because the intel_rapl_common module still probes on such platforms even if 'defaults_msr' is not set after commit 1488ac990ac8 ("powercap: intel_rapl: Allow probing without CPUID match"). Thus the MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework. Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults is always valid.
In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon 'region->group->tcam' [1]. Fix by retrieving the 'tcam' pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 [...] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b
In the Linux kernel, the following vulnerability has been resolved: wireguard: netlink: access device through ctx instead of peer The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers.
In the Linux kernel, the following vulnerability has been resolved: drm/sched: fix null-ptr-deref in init entity The bug can be triggered by sending an amdgpu_cs_wait_ioctl to the AMDGPU DRM driver on any ASICs with valid context. The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>. For example the following code: static void Syzkaller2(int fd) { union drm_amdgpu_ctx arg1; union drm_amdgpu_wait_cs arg2; arg1.in.op = AMDGPU_CTX_OP_ALLOC_CTX; ret = drmIoctl(fd, 0x140106442 /* amdgpu_ctx_ioctl */, &arg1); arg2.in.handle = 0x0; arg2.in.timeout = 0x2000000000000; arg2.in.ip_type = AMD_IP_VPE /* 0x9 */; arg2->in.ip_instance = 0x0; arg2.in.ring = 0x0; arg2.in.ctx_id = arg1.out.alloc.ctx_id; drmIoctl(fd, 0xc0206449 /* AMDGPU_WAIT_CS * /, &arg2); } The ioctl AMDGPU_WAIT_CS without previously submitted job could be assumed that the error should be returned, but the following commit 1decbf6bb0b4dc56c9da6c5e57b994ebfc2be3aa modified the logic and allowed to have sched_rq equal to NULL. As a result when there is no job the ioctl AMDGPU_WAIT_CS returns success. The change fixes null-ptr-deref in init entity and the stack below demonstrates the error condition: [ +0.000007] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ +0.007086] #PF: supervisor read access in kernel mode [ +0.005234] #PF: error_code(0x0000) - not-present page [ +0.005232] PGD 0 P4D 0 [ +0.002501] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ +0.005034] CPU: 10 PID: 9229 Comm: amd_basic Tainted: G B W L 6.7.0+ #4 [ +0.007797] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020 [ +0.009798] RIP: 0010:drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.006426] Code: 80 00 00 00 00 00 00 00 e8 1a 81 82 e0 49 89 9c 24 c0 00 00 00 4c 89 ef e8 4a 80 82 e0 49 8b 5d 00 48 8d 7b 28 e8 3d 80 82 e0 <48> 83 7b 28 00 0f 84 28 01 00 00 4d 8d ac 24 98 00 00 00 49 8d 5c [ +0.019094] RSP: 0018:ffffc90014c1fa40 EFLAGS: 00010282 [ +0.005237] RAX: 0000000000000001 RBX: 0000000000000000 RCX: ffffffff8113f3fa [ +0.007326] RDX: fffffbfff0a7889d RSI: 0000000000000008 RDI: ffffffff853c44e0 [ +0.007264] RBP: ffffc90014c1fa80 R08: 0000000000000001 R09: fffffbfff0a7889c [ +0.007266] R10: ffffffff853c44e7 R11: 0000000000000001 R12: ffff8881a719b010 [ +0.007263] R13: ffff88810d412748 R14: 0000000000000002 R15: 0000000000000000 [ +0.007264] FS: 00007ffff7045540(0000) GS:ffff8883cc900000(0000) knlGS:0000000000000000 [ +0.008236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.005851] CR2: 0000000000000028 CR3: 000000011912e000 CR4: 0000000000350ef0 [ +0.007175] Call Trace: [ +0.002561] <TASK> [ +0.002141] ? show_regs+0x6a/0x80 [ +0.003473] ? __die+0x25/0x70 [ +0.003124] ? page_fault_oops+0x214/0x720 [ +0.004179] ? preempt_count_sub+0x18/0xc0 [ +0.004093] ? __pfx_page_fault_oops+0x10/0x10 [ +0.004590] ? srso_return_thunk+0x5/0x5f [ +0.004000] ? vprintk_default+0x1d/0x30 [ +0.004063] ? srso_return_thunk+0x5/0x5f [ +0.004087] ? vprintk+0x5c/0x90 [ +0.003296] ? drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.005807] ? srso_return_thunk+0x5/0x5f [ +0.004090] ? _printk+0xb3/0xe0 [ +0.003293] ? __pfx__printk+0x10/0x10 [ +0.003735] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ +0.005482] ? do_user_addr_fault+0x345/0x770 [ +0.004361] ? exc_page_fault+0x64/0xf0 [ +0.003972] ? asm_exc_page_fault+0x27/0x30 [ +0.004271] ? add_taint+0x2a/0xa0 [ +0.003476] ? drm_sched_entity_init+0x2d3/0x420 [gpu_sched] [ +0.005812] amdgpu_ctx_get_entity+0x3f9/0x770 [amdgpu] [ +0.009530] ? finish_task_switch.isra.0+0x129/0x470 [ +0.005068] ? __pfx_amdgpu_ctx_get_entity+0x10/0x10 [amdgpu] [ +0.010063] ? __kasan_check_write+0x14/0x20 [ +0.004356] ? srso_return_thunk+0x5/0x5f [ +0.004001] ? mutex_unlock+0x81/0xd0 [ +0.003802] ? srso_return_thunk+0x5/0x5f [ +0.004096] amdgpu_cs_wait_ioctl+0xf6/0x270 [amdgpu] [ +0.009355] ? __pfx_ ---truncated---
In the Linux kernel, the following vulnerability has been resolved: xsk: fix usage of multi-buffer BPF helpers for ZC XDP Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail().
In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Support specifying the srpt_service_guid parameter Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> parse_one+0x18c/0x1d0 parse_args+0xe1/0x230 load_module+0x8de/0xa60 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x181/0x240 __x64_sys_finit_module+0x5a/0xb0 do_syscall_64+0x5f/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76
In the Linux kernel, the following vulnerability has been resolved: vfio/platform: Create persistent IRQ handlers The vfio-platform SET_IRQS ioctl currently allows loopback triggering of an interrupt before a signaling eventfd has been configured by the user, which thereby allows a NULL pointer dereference. Rather than register the IRQ relative to a valid trigger, register all IRQs in a disabled state in the device open path. This allows mask operations on the IRQ to nest within the overall enable state governed by a valid eventfd signal. This decouples @masked, protected by the @locked spinlock from @trigger, protected via the @igate mutex. In doing so, it's guaranteed that changes to @trigger cannot race the IRQ handlers because the IRQ handler is synchronously disabled before modifying the trigger, and loopback triggering of the IRQ via ioctl is safe due to serialization with trigger changes via igate. For compatibility, request_irq() failures are maintained to be local to the SET_IRQS ioctl rather than a fatal error in the open device path. This allows, for example, a userspace driver with polling mode support to continue to work regardless of moving the request_irq() call site. This necessarily blocks all SET_IRQS access to the failed index.
In the Linux kernel, the following vulnerability has been resolved: spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected Return IRQ_NONE from the interrupt handler when no interrupt was detected. Because an empty interrupt will cause a null pointer error: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x54/0x100 hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx] __handle_irq_event_percpu+0x64/0x1e0 handle_irq_event+0x7c/0x1cc
In the Linux kernel, the following vulnerability has been resolved: drivers: perf: ctr_get_width function for legacy is not defined With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask
In the Linux kernel, the following vulnerability has been resolved: erofs: fix inconsistent per-file compression format EROFS can select compression algorithms on a per-file basis, and each per-file compression algorithm needs to be marked in the on-disk superblock for initialization. However, syzkaller can generate inconsistent crafted images that use an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA algorithmtype even it's not set in `sbi->available_compr_algs`. This can lead to an unexpected "BUG: kernel NULL pointer dereference" if the corresponding decompressor isn't built-in. Fix this by checking against `sbi->available_compr_algs` for each m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset bitmap is now fixed together since it was harmless previously.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()' In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc' was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc' NULL pointer check. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix delayed ACKs to not set the reference serial number Fix the construction of delayed ACKs to not set the reference serial number as they can't be used as an RTT reference.
In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: don't try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77
In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid-of: fix NULL-deref on failed power up A while back the I2C HID implementation was split in an ACPI and OF part, but the new OF driver never initialises the client pointer which is dereferenced on power-up failures.
In the Linux kernel, the following vulnerability has been resolved: netfs, fscache: Prevent Oops in fscache_put_cache() This function dereferences "cache" and then checks if it's IS_ERR_OR_NULL(). Check first, then dereference.
In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.
In the Linux kernel, the following vulnerability has been resolved: serial: max310x: fix NULL pointer dereference in I2C instantiation When trying to instantiate a max14830 device from userspace: echo max14830 0x60 > /sys/bus/i2c/devices/i2c-2/new_device we get the following error: Unable to handle kernel NULL pointer dereference at virtual address... ... Call trace: max310x_i2c_probe+0x48/0x170 [max310x] i2c_device_probe+0x150/0x2a0 ... Add check for validity of devtype to prevent the error, and abort probe with a meaningful error message.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix NULL pointer dereference in f2fs_submit_page_write() BUG: kernel NULL pointer dereference, address: 0000000000000014 RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? __die+0x29/0x70 ? page_fault_oops+0x154/0x4a0 ? prb_read_valid+0x20/0x30 ? __irq_work_queue_local+0x39/0xd0 ? irq_work_queue+0x36/0x70 ? do_user_addr_fault+0x314/0x6c0 ? exc_page_fault+0x7d/0x190 ? asm_exc_page_fault+0x2b/0x30 ? f2fs_submit_page_write+0x6cf/0x780 [f2fs] ? f2fs_submit_page_write+0x736/0x780 [f2fs] do_write_page+0x50/0x170 [f2fs] f2fs_outplace_write_data+0x61/0xb0 [f2fs] f2fs_do_write_data_page+0x3f8/0x660 [f2fs] f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs] f2fs_write_cache_pages+0x3da/0xbe0 [f2fs] ... It is possible that other threads have added this fio to io->bio and submitted the io->bio before entering f2fs_submit_page_write(). At this point io->bio = NULL. If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true, then an NULL pointer dereference error occurs at bio_get(io->bio). The original code for determining zone end was after "out:", which would have missed some fio who is zone end. I've moved this code before "skip:" to make sure it's done for each fio.
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend In current scenario if Plug-out and Plug-In performed continuously there could be a chance while checking for dwc->gadget_driver in dwc3_gadget_suspend, a NULL pointer dereference may occur. Call Stack: CPU1: CPU2: gadget_unbind_driver dwc3_suspend_common dwc3_gadget_stop dwc3_gadget_suspend dwc3_disconnect_gadget CPU1 basically clears the variable and CPU2 checks the variable. Consider CPU1 is running and right before gadget_driver is cleared and in parallel CPU2 executes dwc3_gadget_suspend where it finds dwc->gadget_driver which is not NULL and resumes execution and then CPU1 completes execution. CPU2 executes dwc3_disconnect_gadget where it checks dwc->gadget_driver is already NULL because of which the NULL pointer deference occur.
In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Fix legacy IPoIB due to wrong number of queues The cited commit creates child PKEY interfaces over netlink will multiple tx and rx queues, but some devices doesn't support more than 1 tx and 1 rx queues. This causes to a crash when traffic is sent over the PKEY interface due to the parent having a single queue but the child having multiple queues. This patch fixes the number of queues to 1 for legacy IPoIB at the earliest possible point in time. BUG: kernel NULL pointer dereference, address: 000000000000036b PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0xcb/0x450 Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a 01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202 RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00 RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40 R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000 R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000 FS: 00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_clone+0x55/0xd0 ip6_finish_output2+0x3fe/0x690 ip6_finish_output+0xfa/0x310 ip6_send_skb+0x1e/0x60 udp_v6_send_skb+0x1e5/0x420 udpv6_sendmsg+0xb3c/0xe60 ? ip_mc_finish_output+0x180/0x180 ? __switch_to_asm+0x3a/0x60 ? __switch_to_asm+0x34/0x60 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? _copy_to_user+0x21/0x30 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_ts64+0x49/0xe0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f9374f1ed14 Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14 RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030 RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc </TASK>
In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE.
In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix iopt_access_list_id overwrite bug Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix NULL domain on device release In the kdump kernel, the IOMMU operates in deferred_attach mode. In this mode, info->domain may not yet be assigned by the time the release_device function is called. It leads to the following crash in the crash kernel: BUG: kernel NULL pointer dereference, address: 000000000000003c ... RIP: 0010:do_raw_spin_lock+0xa/0xa0 ... _raw_spin_lock_irqsave+0x1b/0x30 intel_iommu_release_device+0x96/0x170 iommu_deinit_device+0x39/0xf0 __iommu_group_remove_device+0xa0/0xd0 iommu_bus_notifier+0x55/0xb0 notifier_call_chain+0x5a/0xd0 blocking_notifier_call_chain+0x41/0x60 bus_notify+0x34/0x50 device_del+0x269/0x3d0 pci_remove_bus_device+0x77/0x100 p2sb_bar+0xae/0x1d0 ... i801_probe+0x423/0x740 Use the release_domain mechanism to fix it. The scalable mode context entry which is not part of release domain should be cleared in release_device().
In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.
In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct.
In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal On unloading of the scmi_perf_domain module got the below splat, when in the DT provided to the system under test the '#power-domain-cells' property was missing. Indeed, this particular setup causes the probe to bail out early without giving any error, which leads to the ->remove() callback gets to run too, but without all the expected initialized structures in place. Add a check and bail out early on remove too. Call trace: scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain] scmi_dev_remove+0x28/0x40 [scmi_core] device_remove+0x54/0x90 device_release_driver_internal+0x1dc/0x240 driver_detach+0x58/0xa8 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x70 scmi_driver_unregister+0x28/0x180 [scmi_core] scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain] __arm64_sys_delete_module+0x1a8/0x2c0 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80) ---[ end trace 0000000000000000 ]---
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix the null pointer when load rlc firmware If the RLC firmware is invalid because of wrong header size, the pointer to the rlc firmware is released in function amdgpu_ucode_request. There will be a null pointer error in subsequent use. So skip validation to fix it.
In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Ensure that objs is not NULL in virtio_gpu_array_put_free() If virtio_gpu_object_shmem_init() fails (e.g. due to fault injection, as it happened in the bug report by syzbot), virtio_gpu_array_put_free() could be called with objs equal to NULL. Ensure that objs is not NULL in virtio_gpu_array_put_free(), or otherwise return from the function.
In the Linux kernel, the following vulnerability has been resolved: Revert "kobject: Remove redundant checks for whether ktype is NULL" This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31. It is reported to cause problems, so revert it for now until the root cause can be found.
In the Linux kernel, the following vulnerability has been resolved: usb: core: Prevent null pointer dereference in update_port_device_state Currently, the function update_port_device_state gets the usb_hub from udev->parent by calling usb_hub_to_struct_hub. However, in case the actconfig or the maxchild is 0, the usb_hub would be NULL and upon further accessing to get port_dev would result in null pointer dereference. Fix this by introducing an if check after the usb_hub is populated.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL.
In the Linux kernel, the following vulnerability has been resolved: usb: hub: Guard against accesses to uninitialized BOS descriptors Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup.