The D-Link DSL6740C modem has an Incorrect Use of Privileged APIs vulnerability, allowing unauthenticated remote attackers to modify any user’s password by leveraging the API, thereby granting access to Web, SSH, and Telnet services using that user’s account.

A vulnerability has been found in D-Link DIR-816 A2 1.10CNB04 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /goform/setDeviceSettings of the component Web Interface. The manipulation of the argument statuscheckpppoeuser leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-252139.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR-615 devices have a buffer overflow via a long Authorization HTTP header.

A security issue exists in D-Link D-View 8 v2.0.2.89 and prior that could allow an attacker to manipulate the probe inventory of the D-View service. This could result in the disclosure of information from other probes, denial of service conditions due to the probe inventory becoming full, or the execution of tasks on other probes.

atbox.htm on D-Link DSL-2770L devices allows remote unauthenticated attackers to discover admin credentials.

A vulnerability was identified in D-Link DIR-825 2.10. Affected by this vulnerability is the function get_ping_app_stat of the file ping_response.cgi of the component httpd. The manipulation of the argument ping_ipaddr leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

Missing authentication for critical function in DAP-1880AC firmware version 1.21 and earlier allows a remote attacker to login to the device as an authenticated user without the access privilege via unspecified vectors.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue in the getcfg.php component of D-Link DIR816L_FW206b01 allows attackers to access the device via a crafted payload.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the addhostfilter parameter in /goform/websHostFilter.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

An issue was discovered on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. The administrative password is stored in plaintext in the /tmp/csman/0 file. An attacker having a directory traversal (or LFI) can easily get full router access.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the MAC parameter in /goform/editassignment.

D-Link DIR-823-Pro v1.0.2 was discovered to contain a command injection vulnerability in the function SetNTPserverSeting. This vulnerability allows attackers to execute arbitrary commands via the system_time_timezone parameter.

D-Link DSL-G2452DG HW:T1\\tFW:ME_2.00 was discovered to contain insecure permissions.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the IPADDR and nvmacaddr parameters in /goform/form2Dhcpip.

D-Link DIR-645 v1.03 was discovered to contain a command injection vulnerability via the QUERY_STRING parameter at __ajax_explorer.sgi.

D-Link DIR-822+ V1.0.2 was found to contain a command injection in SetStaticRouteSettings function. allows remote attackers to execute arbitrary commands via shell.

A vulnerability has been found in D-Link DAR-7000 up to 20231126 and classified as critical. This vulnerability affects unknown code of the file /user/inc/workidajax.php. The manipulation of the argument id leads to sql injection. The exploit has been disclosed to the public and may be used. VDB-247162 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. A cfm UDP service listening on port 65002 allows remote, unauthenticated exfiltration of administrative credentials.

A stack-based buffer overflow was found on the D-Link DIR-842 REVC with firmware v3.13B09 HOTFIX due to the use of strcpy for LOGINPASSWORD when handling a POST request to the /MTFWU endpoint.

The LAN-side Web-Configuration Interface has Stack-based Buffer Overflow vulnerability in the D-Link Wi-Fi router firmware DIR-890L DIR890LA1_FW107b09.bin and previous versions. The function created at 0x17958 of /htdocs/cgibin will call sprintf without checking the length of strings in parameters given by HTTP header and can be controlled by users easily. The attackers can exploit the vulnerability to carry out arbitrary code by means of sending a specially constructed payload to port 49152.

D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.

A vulnerability classified as critical was found in D-Link DI-8100 1.0. This vulnerability affects the function sprintf of the file /upnp_ctrl.asp of the component jhttpd. The manipulation of the argument remove_ext_proto/remove_ext_port leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the proto parameter in /goform/form2IPQoSTcAdd.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the addurlfilter parameter in /goform/websURLFilter.

D-link 882 DIR882A1_FW130B06 was discovered to contain a command injection vulnerability in`/usr/bin/cli.

D-Link DAP-1330_OSS-firmware_1.00b21 was discovered to contain a stack overflow via the function checkvalidupgrade.

D-Link DAP-1330_OSS-firmware_1.00b21 was discovered to contain a heap overflow via the devicename parameter in /goform/setDeviceSettings.

Use of a static key to protect a JWT token used in user authentication can allow an for an authentication bypass in D-Link D-View 8 v2.0.1.28

A vulnerability, which was classified as critical, has been found in D-Link DIR-825 2.10. This issue affects the function sub_410DDC of the file switch_language.cgi of the component httpd. The manipulation of the argument Language leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue discovered in D-Link dir815 v.1.01SSb08.bin allows a remote attacker to execute arbitrary code via a crafted POST request to the service parameter in the soapcgi_main function of the cgibin binary component.

A command injection vulnerability in the component /setnetworksettings/IPAddress of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

A command injection vulnerability in the component /setnetworksettings/SubnetMask of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a command injection vulnerability via the admuser and admpass parameters in /goform/setSysAdm.

An issue in D-Link DIR-850L v.B1_FW223WWb01 allows a remote attacker to execute arbitrary code via a crafted script to the en parameter.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the lanip parameter in /goform/setNetworkLan.

D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

D-Link DCS-8300LHV2 ONVIF SetHostName Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DCS-8300LHV2 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the SetHostName ONVIF call. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21322.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in D-Link DAR-7000 up to 20151231. This issue affects some unknown processing of the file /log/webmailattach.php. The manipulation of the argument table_name leads to an unknown weakness. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-240239. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR-816 A2_v1.10CNB04 was discovered to contain a stack overflow via the urladd parameter in /goform/websURLFilterAddDel.

A vulnerability, which was classified as critical, has been found in D-Link DIR-632 FW103B08. Affected by this issue is the function get_pure_content of the component HTTP POST Request Handler. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-X3260 SetSysEmailSettings AccountName Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21159.