DNSSEC validation is not performed correctly. An attacker can cause this package to report successful validation for invalid, attacker-controlled records. Root DNSSEC public keys are not validated, permitting an attacker to present a self-signed root key and delegation chain.

Certifi is a curated collection of Root Certificates for validating the trustworthiness of SSL certificates while verifying the identity of TLS hosts. Certifi prior to version 2023.07.22 recognizes "e-Tugra" root certificates. e-Tugra's root certificates were subject to an investigation prompted by reporting of security issues in their systems. Certifi 2023.07.22 removes root certificates from "e-Tugra" from the root store.

Affected devices beacon to eCharge cloud infrastructure asking if there are any command they should run. This communication is established over an insecure channel since peer verification is disabled everywhere. Therefore, remote unauthenticated users  suitably positioned on the network between an EV charger controller and eCharge infrastructure can execute arbitrary commands with elevated privileges on affected devices. This issue affects cph2_echarge_firmware: through 2.0.4.

An issue was discovered on Samsung mobile devices with N(7.1), O(8.x), P(9.0), and Q(10.0) software. Arbitrary code execution is possible on the lock screen. The Samsung ID is SVE-2019-15266 (December 2019).

In PHPJabbers Cleaning Business Software 1.0, lack of verification when changing an email address and/or password (on the Profile Page) allows remote attackers to take over accounts.

Matrix Synapse before 1.5.0 mishandles signature checking on some federation APIs. Events sent over /send_join, /send_leave, and /invite may not be correctly signed, or may not come from the expected servers.

IBM Aspera Faspex 5.0.5 could allow a remote attacked to bypass IP restrictions due to improper access controls. IBM X-Force ID: 259649.

In PHP Jabbers Class Scheduling System 1.0, lack of verification when changing an email address and/or password (on the Profile Page) allows remote attackers to take over accounts.

JTEKT TOYOPUC PLCs through 2022-04-29 do not ensure data integrity. They utilize the unauthenticated CMPLink/TCP protocol for engineering purposes, including downloading projects and control logic to the PLC. Control logic is downloaded to the PLC on a block-by-block basis with a given memory address and a blob of machine code. The logic that is downloaded to the PLC is not cryptographically authenticated, allowing an attacker to execute arbitrary machine code on the PLC's CPU module in the context of the runtime. In the case of the PC10G-CPU, and likely for other CPU modules of the TOYOPUC family, a processor without MPU or MMU is used and this no memory protection or privilege-separation capabilities are available, giving an attacker full control over the CPU.

The Motorola MDLC protocol through 2022-05-02 mishandles message integrity. It supports three security modes: Plain, Legacy Encryption, and New Encryption. In Legacy Encryption mode, traffic is encrypted via the Tiny Encryption Algorithm (TEA) block-cipher in ECB mode. This mode of operation does not offer message integrity and offers reduced confidentiality above the block level, as demonstrated by an ECB Penguin attack against any block ciphers.

picklescan before 0.0.23 fails to detect malicious pickle files inside PyTorch model archives when certain ZIP file flag bits are modified. By flipping specific bits in the ZIP file headers, an attacker can embed malicious pickle files that remain undetected by PickleScan while still being successfully loaded by PyTorch's torch.load(). This can lead to arbitrary code execution when loading a compromised model.

A vulnerability has been identified in SIMATIC Drive Controller family (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants) (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V20.8), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V20.8), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.4.0), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.4.0), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V2.8.1), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.8.1), SIMATIC S7-1500 Software Controller (All versions < V20.8), SIMATIC S7-1500 Software Controller (All versions >= V20.8), SIMATIC S7-PLCSIM Advanced (All versions < V3.0), SIMATIC S7-PLCSIM Advanced (All versions >= V3.0). An attacker with network access to port 102/tcp could potentially modify the user program on the PLC in a way that the running code is different from the source code which is stored on the device. An attacker must have network access to affected devices and must be able to perform changes to the user program. The vulnerability could impact the perceived integrity of the user program stored on the CPU. An engineer that tries to obtain the code of the user program running on the device, can receive different source code that is not actually running on the device.

CodeIgniter is a PHP full-stack web framework. This vulnerability may allow attackers to spoof their IP address when the server is behind a reverse proxy. This issue has been patched, please upgrade to version 4.2.11 or later, and configure `Config\App::$proxyIPs`. As a workaround, do not use `$request->getIPAddress()`.

A vulnerability was found in mod_wsgi. The X-Client-IP header is not removed from a request from an untrusted proxy, allowing an attacker to pass the X-Client-IP header to the target WSGI application because the condition to remove it is missing.

A remote code execution vulnerability was discovered on Western Digital My Cloud devices where an attacker could trick a NAS device into loading through an unsecured HTTP call. This was a result insufficient verification of calls to the device. The vulnerability was addressed by disabling checks for internet connectivity using HTTP.

The firmware on Moxa TN-5900 devices through 3.1 has a weak algorithm that allows an attacker to defeat an inspection mechanism for integrity protection.

The npm ci command in npm 7.x and 8.x through 8.1.3 proceeds with an installation even if dependency information in package-lock.json differs from package.json. This behavior is inconsistent with the documentation, and makes it easier for attackers to install malware that was supposed to have been blocked by an exact version match requirement in package-lock.json. NOTE: The npm team believes this is not a vulnerability. It would require someone to socially engineer package.json which has different dependencies than package-lock.json. That user would have to have file system or write access to change dependencies. The npm team states preventing malicious actors from socially engineering or gaining file system access is outside the scope of the npm CLI.

Syltek application before its 10.22.00 version, does not correctly check that a product ID has a valid payment associated to it. This could allow an attacker to forge a request and bypass the payment system by marking items as payed without any verification.

A vulnerability classified as critical has been found in Zerocoin libzerocoin. Affected is the function CoinSpend::CoinSpend of the file CoinSpend.cpp of the component Proof Handler. The manipulation leads to insufficient verification of data authenticity. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The patch is identified as ce103a09ec079d0a0ed95475992348bed6e860de. It is recommended to apply a patch to fix this issue. VDB-222318 is the identifier assigned to this vulnerability.

Pexip Infinity Connect before 1.8.0 omits certain provisioning authenticity checks. Thus, untrusted code may execute.

The Portable SDK for UPnP Devices is an SDK for development of UPnP device and control point applications. The server part of pupnp (libupnp) appears to be vulnerable to DNS rebinding attacks because it does not check the value of the `Host` header. This can be mitigated by using DNS revolvers which block DNS-rebinding attacks. The vulnerability is fixed in version 1.14.6 and later.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Affected devices load firmware updates without checking the authenticity. Furthermore the integrity of the unencrypted firmware is only verified by a non-cryptographic method. This could allow an attacker to manipulate a firmware update and flash it to the device.

Apache HTTP Server 2.4.53 and earlier may not send the X-Forwarded-* headers to the origin server based on client side Connection header hop-by-hop mechanism. This may be used to bypass IP based authentication on the origin server/application.

Gradio is an open-source Python package designed for quick prototyping. This vulnerability is a **lack of integrity check** on the downloaded FRP client, which could potentially allow attackers to introduce malicious code. If an attacker gains access to the remote URL from which the FRP client is downloaded, they could modify the binary without detection, as the Gradio server does not verify the file's checksum or signature. Any users utilizing the Gradio server's sharing mechanism that downloads the FRP client could be affected by this vulnerability, especially those relying on the executable binary for secure data tunneling. There is no direct workaround for this issue without upgrading. However, users can manually validate the integrity of the downloaded FRP client by implementing checksum or signature verification in their own environment to ensure the binary hasn't been tampered with.

An arbitrary file download and execution vulnerability was found in the HShell.dll of handysoft Co., Ltd groupware ActiveX module. This issue is due to missing support for integrity check of download URL or downloaded file hash.

Insufficient verification of data authenticity issue exists in NJ Series CPU Unit all versions and NX Series CPU Unit all versions. If a user program in the affected product is altered, the product may not be able to detect the alteration.