A use-after-free vulnerability exists in the coap_delete_pdu_lkd function within coap_pdu.c of the libcoap library. This issue occurs due to improper handling of memory after the freeing of a PDU object, leading to potential memory corruption or the possibility of executing arbitrary code. NOTE: this is disputed by the Supplier because it only occurs when an application uses libcoap incorrectly.

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id.

A hashtable in the Ion Engine could have been mutated while there was a live interior reference, leading to a potential use-after-free and exploitable crash. This vulnerability affects Firefox < 118.

SAMtools is a program for reading, manipulating and writing bioinformatics file formats. The `mpileup` command outputs DNA sequences that have been aligned against a known reference. On each output line it writes the reference position, optionally the reference DNA base at that position (obtained from a separate file) and all of the DNA bases that aligned to that position. As the output is ordered by position, reference data that is no longer needed is discarded once it has been printed out. Under certain conditions the data could be discarded too early, leading to an attempt to read from a pointer to freed memory. This bug may allow information about program state to be leaked. It may also cause a program crash through an attempt to access invalid memory. This bug is fixed in versions 1.21.1 and 1.22. There is no workaround for this issue.

An issue was discovered in the tremor-script crate before 0.11.6 for Rust. A patch operation may result in a use-after-free.

Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 148, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the JavaScript Engine component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

Use-after-free in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 148, Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird 148, and Thunderbird 140.8.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, `xf_SetWindowMinMaxInfo` dereferences a freed `xfAppWindow` pointer because `xf_rail_get_window` in `xf_rail_server_min_max_info` returns an unprotected pointer from the `railWindows` hash table, and the main thread can concurrently delete the window (via a window delete order) while the RAIL channel thread is still using the pointer. Version 3.23.0 fixes the issue.

A use-after-free issue was addressed with improved memory management. This issue is fixed in watchOS 9.5, tvOS 16.5, macOS Ventura 13.4, iOS 15.7.6 and iPadOS 15.7.6, macOS Big Sur 11.7.7, macOS Monterey 12.6.6, iOS 16.5 and iPadOS 16.5. A remote attacker may be able to cause unexpected app termination or arbitrary code execution.

Use-after-free vulnerability in the nsHostResolver::ConditionallyRefreshRecord function in libxul.so in Mozilla Firefox before 29.0, Firefox ESR 24.x before 24.5, Thunderbird before 24.5, and SeaMonkey before 2.26 allows remote attackers to execute arbitrary code or cause a denial of service (heap memory corruption) via vectors related to host resolution.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.23.0, `xf_clipboard_format_equal` reads freed `lastSentFormats` memory because `xf_clipboard_formats_free` (called from the cliprdr channel thread during auto-reconnect) frees the array while the X11 event thread concurrently iterates it in `xf_clipboard_changed`, triggering a heap use after free. Version 3.23.0 fixes the issue.

A use-after-free issue was addressed by removing the vulnerable code. This issue is fixed in iPadOS 17.7.9, macOS Sequoia 15.6, macOS Sonoma 14.7.7, macOS Ventura 13.7.7. An attacker may be able to cause unexpected app termination.

An issue was discovered in aio_poll() in fs/aio.c in the Linux kernel through 5.0.4. A file may be released by aio_poll_wake() if an expected event is triggered immediately (e.g., by the close of a pair of pipes) after the return of vfs_poll(), and this will cause a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in kerberos authentication Setting sess->user = NULL was introduced to fix the dangling pointer created by ksmbd_free_user. However, it is possible another thread could be operating on the session and make use of sess->user after it has been passed to ksmbd_free_user but before sess->user is set to NULL.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.21.0, `xf_Pointer_New` frees `cursorPixels` on failure, then `pointer_free` calls `xf_Pointer_Free` and frees it again, triggering ASan UAF. A malicious server can trigger a client‑side use after free, causing a crash (DoS) and potential heap corruption with code‑execution risk depending on allocator behavior and surrounding heap layout. Version 3.21.0 contains a patch for the issue.

The PowerVR GPU driver allows unprivileged apps to allocated pinned memory, unpin it (which makes it available to be freed), and continue using the page in GPU calls. No privileges required and this results in kernel memory corruption.Product: AndroidVersions: Android SoCAndroid ID: A-232440670

Use-after-free vulnerability in the NetWare Core Protocol (NCP) feature in Novell eDirectory 8.7.3 SP10 before 8.7.3 SP10 FTF1 and 8.8 SP2 for Windows allows remote attackers to cause a denial of service and possibly execute arbitrary code via a sequence of "Get NCP Extension Information By Name" requests that cause one thread to operate on memory after it has been freed in another thread, which triggers memory corruption, aka Novell Bug 373852.

libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a use-after-free in xmlSchemaIDCFillNodeTables and xmlSchemaBubbleIDCNodeTables in xmlschemas.c. To exploit this, a crafted XML document must be validated against an XML schema with certain identity constraints, or a crafted XML schema must be used.

OwnTone (aka owntone-server) through 28.1 has a use-after-free in net_bind() in misc.c.

An arbitrary file upload vulnerability in the camera_upload.php component of PMB v7.4.6 allows attackers to execute arbitrary code via a crafted image file.

An Arbitrary Free (Remote Code Execution) issue was discovered in Design Science MathType 6.9c. Crafted input can overwrite a structure, leading to a function call with an invalid parameter, and a subsequent free of important data such as a function pointer or list pointer. This is fixed in 6.9d.

Use After Free in Remote logging (which is disabled by default) in McAfee McAfee Agent (MA) 5.x prior to 5.6.0 allows remote unauthenticated attackers to cause a Denial of Service and potentially a remote code execution via a specially crafted HTTP header sent to the logging service.

spl_array.c in the SPL extension in PHP before 5.5.37 and 5.6.x before 5.6.23 improperly interacts with the unserialize implementation and garbage collection, which allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free and application crash) via crafted serialized data.

A use after free issue discovered in ONLYOFFICE DocumentServer 4.0.3 through 7.3.2 allows remote attackers to run arbitrary code via crafted JavaScript file.

A use-after-free related to unsound inference in the bytecode generation when optimizations are enabled for Hermes prior to commit da8990f737ebb9d9810633502f65ed462b819c09 could have been used by an attacker to achieve remote code execution. Note that this is only exploitable in cases where Hermes is used to execute untrusted JavaScript. Hence, most React Native applications are not affected.

A use-after-free issue was discovered in Py_FindObjects() function in SciPy versions prior to 1.8.0. NOTE: the vendor and discoverer indicate that this is not a security issue.

In p2p_process_prov_disc_req of p2p_pd.c, there is a possible out of bounds read and write due to a use after free. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11 Android-8.1 Android-9 Android-10Android ID: A-181660448

In OSSEC-HIDS 2.7 through 3.5.0, the server component responsible for log analysis (ossec-analysisd) is vulnerable to a use-after-free during processing of ossec-alert formatted msgs (received from authenticated remote agents and delivered to the analysisd processing queue by ossec-remoted).

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have an use after free vulnerability. Successful exploitation could lead to arbitrary code execution .

A bytecode optimization bug in Hermes prior to commit e6ed9c1a4b02dc219de1648f44cd808a56171b81 could be used to cause an use-after-free and obtain arbitrary code execution via a carefully crafted payload. Note that this is only exploitable in cases where Hermes is used to execute untrusted JavaScript. Hence, most React Native applications are not affected.

A heap use-after-free flaw was found in curl versions from 7.59.0 through 7.61.1 in the code related to closing an easy handle. When closing and cleaning up an 'easy' handle in the `Curl_close()` function, the library code first frees a struct (without nulling the pointer) and might then subsequently erroneously write to a struct field within that already freed struct.

Memory corruption while processing MBSSID beacon containing several subelement IE.

SoftEtherVPN 5.02.5187 is vulnerable to Use after Free in the Command.c file via the CheckNetworkAcceptThread function. NOTE: the Supplier disputes this because the use-after-free is not in the VPN software, but is instead in a separate tool that has no untrusted input and runs under the user's own privileges (it is a stress-testing tool for a networking stack).

Exiv2 is a C++ library and a command-line utility to read, write, delete and modify Exif, IPTC, XMP and ICC image metadata. A heap buffer overflow was found in Exiv2 versions v0.28.0 to v0.28.4. Versions prior to v0.28.0, such as v0.27.7, are **not** affected. Exiv2 is a command-line utility and C++ library for reading, writing, deleting, and modifying the metadata of image files. The heap overflow is triggered when Exiv2 is used to write metadata into a crafted image file. An attacker could potentially exploit the vulnerability to gain code execution, if they can trick the victim into running Exiv2 on a crafted image file. Note that this bug is only triggered when writing the metadata, which is a less frequently used Exiv2 operation than reading the metadata. For example, to trigger the bug in the Exiv2 command-line application, you need to add an extra command-line argument such as `fixiso`. The bug is fixed in version v0.28.5. Users are advised to upgrade. There are no known workarounds for this vulnerability.

A use after free memory corruption issue exists in Yandex Browser for Desktop prior to version 24.4.0.682

Exim before 4.99.3, in certain GnuTLS configurations, has a remotely reachable use-after-free in the BDAT body parsing path. It is triggered when a client sends a TLS close_notify mid-body during a CHUNKING transfer, followed by a final cleartext byte on the same TCP connection. This can lead to heap corruption. An unauthenticated network attacker exploiting this vulnerability could execute arbitrary code.

HTTP Protocol Stack Remote Code Execution Vulnerability

In rfc_check_send_cmd of rfc_utils.cc, there is a possible way to execute arbitrary code due to a use after free. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

dpic 2021.04.10 has a use-after-free in thedeletestringbox() function in dpic.y. A different vulnerablility than CVE-2021-32421.

In sdp_snd_service_search_req of sdp_discovery.cc, there is a possible way to execute arbitrary code due to a use after free. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.

Windows Reliable Multicast Transport Driver (RMCAST) Remote Code Execution Vulnerability

The VMware vCenter Server contains a use-after-free vulnerability in the implementation of the DCERPC protocol. A malicious actor with network access to vCenter Server may exploit this issue to execute arbitrary code on the underlying operating system that hosts vCenter Server.

In OnWakelockReleased of attribution_processor.cc, there is a use after free that could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-12 Android-12L Android-13Android ID: A-254774758

In mruby 2.1.0, there is a use-after-free in hash_slice in mrbgems/mruby-hash-ext/src/hash-ext.c.

An issue in HTACG HTML Tidy v5.7.28 allows attacker to execute arbitrary code via the -g option of the CleanNode() function in gdoc.c.

After tar_close(), libtar.c releases the memory pointed to by pointer t. After tar_close() is called in the list() function, it continues to use pointer t: free_longlink_longname(t->th_buf) . As a result, the released memory is used (use-after-free).

The mq_notify function in the GNU C Library (aka glibc) versions 2.32 and 2.33 has a use-after-free. It may use the notification thread attributes object (passed through its struct sigevent parameter) after it has been freed by the caller, leading to a denial of service (application crash) or possibly unspecified other impact.

Use-after-free in the WebRTC: Signaling component. This vulnerability was fixed in Firefox 146, Firefox ESR 140.6, Thunderbird 146, and Thunderbird 140.6.