In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doIPSec function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the modifyrow function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the reboot function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doL2TP function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the restore function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the backup function.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.

In DrayTek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the rename_table function.

DrayTek Vigor3900 1.5.1.3 contains a command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `set_ap_map_config.'

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `commandTable.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `delete_wlan_profile.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `autodiscovery_clear.`

DrayTek Vigor3900 v1.5.1.6 was discovered to contain a command injection vulnerability via the sub_2C920 function at /cgi-bin/mainfunction.cgi. This vulnerability allows attackers to execute arbitrary commands via supplying a crafted HTTP message.

In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPTP function.

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `doOpenVPN.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `setSWMOption.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `download_ovpn.`

DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `setSWMGroup.`

DrayTek Vigor3900 1.5.1.3 contains a command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `delete_map_profile.`

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.

Buffer Overflow vulnerabilities exist in DrayTek Vigor310 devices through 4.3.2.6 (in the Vigor management UI) because of improper retrieval and handling of the CGI form parameters.

A stack-based Buffer Overflow vulnerability in DrayTek Vigor310 devices through 4.3.2.6 allows a remote attacker to execute arbitrary code via a long query string to the cgi-bin/ipfedr.cgi component.

DrayTek Vigor 3900 before v1.5.1.5_Beta, DrayTek Vigor 2960 before v1.5.1.5_Beta and DrayTek Vigor 300B before v1.5.1.5_Beta were discovered to contain a command injection vulnerability via the action parameter at cgi-bin/mainfunction.cgi.

Several CGI endpoints are vulnerable to buffer overflows, by authenticated users, because of missing bounds checking on parameters passed through POST requests to the strcpy function on DrayTek Vigor310 devices through 4.3.2.6.

DrayTek Vigor3910 devices through 4.3.2.6 have a stack-based overflow when processing query string parameters because GetCGI mishandles extraneous ampersand characters and long key-value pairs.

The CGI endpoints v2x00.cgi and cgiwcg.cgi of DrayTek Vigor3910 devices through 4.3.2.6 are vulnerable to buffer overflows, by authenticated users, because of missing bounds checking on parameters passed through POST requests to the strncpy function.

DrayTek Vigor310 devices through 4.3.2.6 allow a remote attacker to change settings or cause a denial of service via .cgi pages because of missing bounds checks on read and write operations.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

An OS Command Injection in the CLI interface on DrayTek Vigor167 version 5.2.2, allows remote attackers to execute arbitrary system commands and escalate privileges via any account created within the web interface.

The DrayTek Vigor 2700 router 2.8.3 allows remote attackers to execute arbitrary JavaScript code, and modify settings or the DNS cache, via a crafted SSID value that is not properly handled during insertion into the sWlessSurvey value in variables.js.

DrayTek Vigor2960 1.3.1_Beta, Vigor3900 1.4.4_Beta, and Vigor300B 1.3.3_Beta, 1.4.2.1_Beta, and 1.4.4_Beta devices allow remote code execution as root (without authentication) via shell metacharacters to the cgi-bin/mainfunction.cgi URI. This issue has been fixed in Vigor3900/2960/300B v1.5.1.

On DrayTek Vigor3900, Vigor2960, and Vigor300B devices before 1.5.1, cgi-bin/mainfunction.cgi/cvmcfgupload allows remote command execution via shell metacharacters in a filename when the text/x-python-script content type is used, a different issue than CVE-2020-14472.

DrayTek Vigor2960 v1.5.1.4 allows an authenticated attacker with network access to the web management interface to inject operating system commands via the mainfunction.cgi 'parameter' parameter. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

DrayTek Vigor3910 devices through 4.3.2.6 are affected by an OS command injection vulnerability that allows an attacker to leverage the recvCmd binary to escape from the emulated instance and inject arbitrary commands into the host machine.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain an unauthenticated remote command execution (RCE) vulnerability via multiple parameters in the "setOpModeCfg" function. This security issue allows an attacker to take complete control of the device. In detail, exploitation allows unauthenticated, remote attackers to execute arbitrary system commands with administrative privileges (i.e., as user "root").

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the config_sequence parameter in other_para of cgitest.cgi.

TP-Link Omada ER605 Access Control Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605. Authentication is required to exploit this vulnerability. The specific issue exists within the handling of the name field in the access control user interface. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22227.

A vulnerability in the TFTP client of Zyxel GS1900 series firmware, XGS1210 series firmware, and XGS1250 series firmware, which could allow an authenticated LAN user to execute arbitrary OS commands via the GUI of the vulnerable device.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, has been found in Uniview ISC 2500-S up to 20210930. Affected by this issue is the function setNatConfig of the file /Interface/DevManage/VM.php. The manipulation of the argument natAddress/natPort/natServerPort leads to os command injection. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251696. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

A vulnerability was found in Tecno 4G Portable WiFi TR118 TR118-M30E-RR-D-EnFrArSwHaPo-OP-V008-20220830. It has been declared as critical. This vulnerability affects unknown code of the file /goform/goform_get_cmd_process of the component Ping Tool. The manipulation of the argument url leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-246130 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

Softnext Mail SQR Expert is an email management platform, it has insufficient filtering for a special character within a spcific function. A remote attacker authenticated as a localhost can exploit this vulnerability to perform command injection attacks, to execute arbitrary system command, manipulate system or disrupt service.

An OS command injection vulnerability has been found to affect legacy QNAP VioStor NVR models running QVR Firmware 4.x. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QVR Firmware 5.0.0 and later

D-Link DIR-X3260 SetSysEmailSettings EmailFrom Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-X3260 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the prog.cgi program, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21102.

D-Link Multiple Routers cli Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1260 and DIR-2150 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the CLI service, which listens on TCP port 23. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-19946.

/jsonrpc on D-Link DIR-841 3.03 and 3.04 devices allows authenticated command injection via ping, ping6, or traceroute (under System Tools).