A stack-based Buffer Overflow vulnerability in DrayTek Vigor310 devices through 4.3.2.6 allows a remote attacker to execute arbitrary code via a long query string to the cgi-bin/ipfedr.cgi component.
DrayTek Vigor3910 devices through 4.3.2.6 have a stack-based overflow when processing query string parameters because GetCGI mishandles extraneous ampersand characters and long key-value pairs.
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `setSWMGroup.`
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the restore function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPTP function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the modifyrow function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doPPPo function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doL2TP function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the backup function.
In DrayTek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the rename_table function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the reboot function.
In Draytek Vigor3900 1.5.1.3, attackers can inject malicious commands into mainfunction.cgi and execute arbitrary commands by calling the doIPSec function.
An authorized RCE vulnerability exists in the DrayTek Vigor2960 router version 1.4.4, where an attacker can place a malicious command into the table parameter of the doPPPoE function in the cgi-bin/mainfunction.cgi route, and finally the command is executed by the system function.
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `setSWMOption.`
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `doOpenVPN.`
DrayTek Vigor3900 v1.5.1.6 was discovered to contain a command injection vulnerability via the sub_2C920 function at /cgi-bin/mainfunction.cgi. This vulnerability allows attackers to execute arbitrary commands via supplying a crafted HTTP message.
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `commandTable.`
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `autodiscovery_clear.`
DrayTek Vigor3900 1.5.1.3 contains a command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `delete_map_profile.`
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `delete_wlan_profile.`
DrayTek Vigor3900 1.5.1.3 contains a post-authentication command injection vulnerability This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `download_ovpn.`
DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.
DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function.
DrayTek Vigor3900 1.5.1.3 contains a command injection vulnerability. This vulnerability occurs when the `action` parameter in `cgi-bin/mainfunction.cgi` is set to `set_ap_map_config.'
DrayTek Vigor 3900 before v1.5.1.5_Beta, DrayTek Vigor 2960 before v1.5.1.5_Beta and DrayTek Vigor 300B before v1.5.1.5_Beta were discovered to contain a command injection vulnerability via the action parameter at cgi-bin/mainfunction.cgi.
DrayTek Vigor310 devices through 4.3.2.6 allow a remote attacker to change settings or cause a denial of service via .cgi pages because of missing bounds checks on read and write operations.
The CGI endpoints v2x00.cgi and cgiwcg.cgi of DrayTek Vigor3910 devices through 4.3.2.6 are vulnerable to buffer overflows, by authenticated users, because of missing bounds checking on parameters passed through POST requests to the strncpy function.
Buffer Overflow vulnerabilities exist in DrayTek Vigor310 devices through 4.3.2.6 (in the Vigor management UI) because of improper retrieval and handling of the CGI form parameters.
Vigor165/166 4.2.7 and earlier; Vigor2620/LTE200 3.9.8.9 and earlier; Vigor2860/2925 3.9.8 and earlier; Vigor2862/2926 3.9.9.5 and earlier; Vigor2133/2762/2832 3.9.9 and earlier; Vigor2135/2765/2766 4.4.5. and earlier; Vigor2865/2866/2927 4.4.5.3 and earlier; Vigor2962 4.3.2.8 and earlier; Vigor3912 4.3.6.1 and earlier; Vigor3910 4.4.3.1 and earlier a stack-based buffer overflow vulnerability has been identified in the URL parsing functionality of the TR069 STUN server. This flaw occurs due to insufficient bounds checking on the amount of URL parameters, allowing an attacker to exploit the overflow by sending a maliciously crafted request. Consequently, a remote attacker can execute arbitrary code with elevated privileges.
Buffer Overflow vulnerability in TRENDnet Trendnet AC1200 TEW-821DAP with firmware version 3.00b06 allows an attacker to execute arbitrary code via the adm_mod_pwd action.
Buffer Overflow vulnerability in TRENDnet AC1200 TEW-821DAP with firmware version 3.00b06 allows an attacker to execute arbitrary code via the adm_add_user action.
TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formTcpipSetup.
TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formIPv6Addr.
D-LINK DWL-6610 FW_v_4.3.0.8B003C was discovered to contain a stack overflow vulnerability in the function update_users.
TP-Link Tapo C210 ActiveCells Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Tapo C210 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the ActiveCells parameter of the CreateRules and ModifyRules APIs. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. . Was ZDI-CAN-20589.
Windows Bluetooth Driver Remote Code Execution Vulnerability
A vulnerability was determined in Tenda CX12L 16.03.53.12. Affected by this issue is the function fromwebExcptypemanFilter of the file /goform/webExcptypemanFilter. Executing a manipulation of the argument page can lead to stack-based buffer overflow. The attack requires access to the local network. The exploit has been publicly disclosed and may be utilized.
A stack overflow vulnerability in Tenda AC23 with firmware version US_AC23V1.0re_V16.03.07.45_cn_TDC01 allows attackers to run arbitrary commands via schedStartTime parameter.
A stack-based buffer overflow in Fortinet FortiWeb version 7.0.0 through 7.0.1, Fortinet FortiWeb version 6.3.6 through 6.3.19, Fortinet FortiWeb 6.4 all versions allows attacker to escalation of privilege via specifically crafted HTTP requests.
A vulnerability was found in Tenda CX12L 16.03.53.12. Affected by this vulnerability is the function fromP2pListFilter of the file /goform/P2pListFilter. Performing a manipulation of the argument page results in stack-based buffer overflow. The attack must originate from the local network. The exploit has been made public and could be used.
PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, the Zenoh uORB subscriber allocates a stack VLA directly from the incoming payload length without bounds. A remote Zenoh publisher can send an oversized fragmented message to force an unbounded stack allocation and copy, causing a stack overflow and crash of the Zenoh bridge task. This vulnerability is fixed in 1.17.0-rc2.
A stack-based buffer overflow in the tmpServer module of TP-Link Archer AX53 v1.0Â allows an authenticated adjacent attacker to trigger a segmentation fault and potentially execute arbitrary code via a specially crafted configuration file. Successful exploitation may cause a crash and could allow arbitrary code execution, enabling modification of device state, exposure of sensitive data, or further compromise of device integrity. This issue affects AX53 v1.0: before 1.7.1 Build 20260213.
TOTOLINK A3002RU V2.1.1-B20211108.1455 was discovered to contain a stack-based buffer overflow via the routernamer`parameter in the formDnsv6 function.
A vulnerability was determined in Yealink SIP-T46U 108.86.0.118. Affected is the function mod_webd.BlueToothTest of the file /api/inner/bttest of the component Web FastCGI Service. Executing a manipulation of the argument btMac/pin/reserved can lead to stack-based buffer overflow. The attack needs to be done within the local network. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure and is working on a patch to fix it.
Tenda i12 V1.0.0.10(3805) was discovered to contain a buffer overflow via the index parameter in the formWifiMacFilterSet function.
D-Link DCS-8300LHV2 ONVIF SetHostName Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DCS-8300LHV2 IP cameras. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the SetHostName ONVIF call. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21322.
An issue in TRENDnet Trendnet AC1200 Dual Band PoE Indoor Wireless Access Point TEW-821DAP v.3.00b06 allows an attacker to execute arbitrary code via the 'mycli' command-line interface component.
NETGEAR RAX30 rex_cgi JSON Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of JSON data. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19355.
TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formDMZ.
TOTOLINK X2000R Gh v1.0.0-B20230221.0948.web was discovered to contain a stack overflow via the function formIpQoS.