Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the share_name parameter at usb_remote_smb_conf.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.
NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at genie_fix2.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at ether.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the sysNewPasswd parameter at admin_account.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear XR300 v1.0.3.78 was discovered to contain a command injection vulnerability in the system_name parameter at wiz_dyn.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear XR300 v1.0.3.78, R7000P v1.3.3.154, and R6400 v2 1.0.4.128 was discovered to contain a command injection vulnerability via the wan_gateway parameter at genie_fix2.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear R8500 v1.0.2.160, XR300 v1.0.3.78, R7000P v1.3.3.154, and R6400 v2 1.0.4.128 were discovered to contain a command injection vulnerability in the component ap_mode.cgi via the apmode_gateway parameter. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear XR300 v1.0.3.78 was discovered to contain a command injection vulnerability in the system_name parameter at genie_dyn.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Netgear R8500 v1.0.2.160 was discovered to contain a command injection vulnerability in the wan_gateway parameter at wiz_fix2.cgi. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
NETGEAR RAX30 libcms_cli Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the libcms_cli module. The issue results from the lack of proper validation of a user-supplied command before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19838.
NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.
NETGEAR RAX30 logCtrl Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the logCtrl action. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19825.
This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R6700v3 1.0.4.120_10.0.91 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the name or email field provided to libreadycloud.so. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-15874.
NETGEAR RAX30 rex_cgi JSON Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of JSON data. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19355.
Netgear R6850 1.1.0.88 was discovered to contain a command injection vulnerability via the ntp_server parameter.
Netgear RAX43 version 1.0.3.96 contains a command injection vulnerability. The readycloud cgi application is vulnerable to command injection in the name parameter.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7800 before 1.0.2.60 and XR500 before 2.3.2.32.
NETGEAR RAX40 devices before 1.0.3.64 are affected by authentication bypass.
NETGEAR R7000 devices before 1.0.9.42 are affected by a buffer overflow by an authenticated user.
NETGEAR R7800 devices before 1.0.2.62 are affected by command injection by an authenticated user.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7800 before 1.0.2.60 and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7000v2 before 1.0.0.53, R6220 before 1.1.0.80, R6260 before 1.1.0.64, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.60, R7000P before 1.3.1.64, R7800 before 1.0.2.60, R7900 before 1.0.3.8, R7900P before 1.4.1.30, R8000 before 1.0.4.46, R8000P before 1.4.1.30, R8300 before 1.0.2.128, R8500 before 1.0.2.128, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.32.
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6200 before 1.1.00.36, D7000 before 1.0.1.74, PR2000 before 1.0.0.28, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6050 before 1.0.1.24, JR6150 before 1.0.1.24, R6120 before 1.0.0.48, R6220 before 1.1.0.86, R6230 before 1.1.0.86, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, and WNR2020 before 1.1.0.62.
Netgear R8500 v1.0.2.160, XR300 v1.0.3.78, R7000P v1.3.3.154, and R6400 v2 1.0.4.128 were discovered to contain a command injection vulnerability in the component wlg_adv.cgi via the apmode_gateway parameter. This vulnerability allows attackers to execute arbitrary OS commands via a crafted request.
Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.36, D7000 before 1.0.1.70, EX6200v2 before 1.0.1.78, EX7000 before 1.0.1.78, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.42, R6050 before 1.0.1.18, R6080 before 1.0.0.42, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.64, R6300v2 before 1.0.4.34, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7800 before 1.0.2.60, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.40.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.100 and R6230 before 1.1.0.100.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects R6700v2 before 1.1.0.42, R6800 before 1.1.0.42, and R6900v2 before 1.1.0.42.
NETGEAR Prosafe WC9500 5.1.0.17, WC7600 5.1.0.17, and WC7520 2.5.0.35 devices allow a remote attacker to execute code with root privileges via shell metacharacters in the reqMethod parameter to login_handler.php.
NETGEAR DGN2200v4 devices before 2017-01-06 are affected by command execution and an FTP insecure root directory.
The default console presented to users over telnet (when enabled) is restricted to a subset of commands. Commands issued at this console, however, appear to be fed directly into a system call or other similar function. This allows any authenticated user to execute arbitrary commands on the device.
NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.
The “puhttpsniff” service, which runs by default, is susceptible to command injection due to improperly sanitized user input. An unauthenticated attacker on the same network segment as the router can execute arbitrary commands on the device without authentication.
NETGEAR RAX30 DHCP Server Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the DHCP server. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19705.
NETGEAR RAX30 UPnP Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR RAX30 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UPnP service. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-19704.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.66, EX2700 before 1.0.1.68, WN3000RPv2 before 1.0.0.90, WN3000RPv3 before 1.0.2.100, LBR1020 before 2.6.5.20, LBR20 before 2.6.5.32, R6700AX before 1.0.10.110, R7800 before 1.0.2.86, R8900 before 1.0.5.38, R9000 before 1.0.5.38, RAX10 before 1.0.10.110, RAX120v1 before 1.2.3.28, RAX120v2 before 1.2.3.28, RAX70 before 1.0.10.110, RAX78 before 1.0.10.110, XR450 before 2.3.2.130, XR500 before 2.3.2.130, and XR700 before 1.0.1.46.
Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, and R7800 before 1.0.2.42.
NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.
NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects WAC505 before 5.0.0.17 and WAC510 before 5.0.0.17.