The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses HTTP Basic Authentication over cleartext HTTP.
In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.
In NETGEAR Nighthawk X10-R9000 prior to 1.0.4.26, an attacker may execute arbitrary system commands as root by sending a specially-crafted MAC address to the "NETGEAR Genie" SOAP endpoint at AdvancedQoS:GetCurrentBandwidthByMAC. Although this requires QoS being enabled, advanced QoS being enabled, and a valid authentication JWT, additional vulnerabilities (CVE-2019-12510) allow an attacker to interact with the entire SOAP API without authentication. Additionally, DNS rebinding techniques may be used to exploit this vulnerability remotely. Exploiting this vulnerability is somewhat involved. The following limitations apply to the payload and must be overcome for successful exploitation: - No more than 17 characters may be used. - At least one colon must be included to prevent mangling. - A single-quote and meta-character must be used to break out of the existing command. - Parent command remnants after the injection point must be dealt with. - The payload must be in all-caps. Despite these limitations, it is still possible to gain access to an interactive root shell via this vulnerability. Since the web server assigns certain HTTP headers to environment variables with all-caps names, it is possible to insert a payload into one such header and reference the subsequent environment variable in the injection point.
Netgear R7000P V1.3.0.8, V1.3.1.64 is vulnerable to Buffer Overflow via parameters: stamode_dns1_pri and stamode_dns1_sec.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the devname parameter in the reset_wifi function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pin_wps function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.
NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.
In Netgear WNR854T 1.5.2 (North America), the UPNP service (/usr/sbin/upnp) is vulnerable to stack-based buffer overflow in the M-SEARCH Host header.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter pppoe_peer_mac and forcing a reboot. This will result in command injection.
Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D6400 before 1.0.0.78, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6250 before 1.0.4.8, R6300v2 before 1.0.4.6, R6400 before 1.0.1.12, R6700 before 1.0.1.16, R7000 before 1.0.7.10, R7100LG before 1.0.0.42, R7300DST before 1.0.0.44, R7900 before 1.0.1.12, R8000 before 1.0.3.36, R8300 before 1.0.2.74, R8500 before 1.0.2.74, WNDR3400v3 before 1.0.1.14, and WNR3500Lv2 before 1.2.0.48.
Certain NETGEAR devices are affected by a hardcoded password. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.
Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D7800 before 1.0.1.34, R7800 before 1.0.2.46, and R9000 before 1.0.3.16.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6700 before 1.0.1.48, R7900 before 1.0.2.16, R6900 before 1.0.1.48, R7000P before 1.3.1.44, R6900P before 1.3.1.44, R6250 before 1.0.4.30, R6300v2 before 1.0.4.32, R6400 before 1.0.1.44, R6400v2 before 1.0.2.60, R7000 before 1.0.9.34, R7100LG before 1.0.0.48, R7300 before 1.0.0.68, R8000 before 1.0.4.18, R8000P before 1.4.1.24, R7900P before 1.4.1.24, R8500 before 1.0.2.122, R8300 before 1.0.2.122, WN2500RPv2 before 1.0.1.54, EX3700 before 1.0.0.72, EX3800 before 1.0.0.72, EX6000 before 1.0.0.32, EX6100 before 1.0.2.24, EX6120 before 1.0.0.42, EX6130 before 1.0.0.24, EX6150v1 before 1.0.0.42, EX6200 before 1.0.3.88, EX7000 before 1.0.0.66, D7000v2 before 1.0.0.51, D6220 before 1.0.0.46, D6400 before 1.0.0.82, and D8500 before 1.0.3.42.
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, EX2700 before 1.0.1.32, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.70, EX6200v2 before 1.0.1.62, EX6400 before 1.0.1.78, EX7300 before 1.0.1.62, EX8000 before 1.0.0.114, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WN2000RPTv3 before 1.0.1.26, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.66, WN3100RPv2 before 1.0.0.56, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects R7800 before 1.0.2.74, R9000 before 1.0.5.2, and XR500 before 2.3.2.66.
Certain NETGEAR devices are affected by weak cryptography. This affects D7000v2 before 1.0.0.62, D8500 before 1.0.3.50, EX3700 before 1.0.0.84, EX3800 before 1.0.0.84, EX6120 before 1.0.0.54, EX6130 before 1.0.0.36, EX7000 before 1.0.1.90, R6250 before 1.0.4.42, R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R6900P before 1.3.2.124, R7000 before 1.0.11.106, R7000P before 1.3.2.124, R7100LG before 1.0.0.56, R7900 before 1.0.4.26, R8000 before 1.0.4.58, R8300 before 1.0.2.134, R8500 before 1.0.2.134, RS400 before 1.5.0.48, WNR3500Lv2 before 1.2.0.62, and XR300 before 1.0.3.50.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, LAX20 before 1.1.6.28, MR60 before 1.0.6.116, MR80 before 1.1.2.20, MS60 before 1.0.6.116, MS80 before 1.1.2.20, MK62 before 1.0.6.116, MK83 before 1.1.2.20, R6400 before 1.0.1.70, R6400v2 before 1.0.4.106, R6700v3 before 1.0.4.106, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7850 before 1.0.5.74, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, EX7500 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7850 before 1.0.5.74, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.74, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.
NETGEAR D7000 devices before 1.0.1.82 are affected by authentication bypass.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR750 before 3.2.18.2, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6900P before 1.3.3.140, R7000 before 1.0.11.126, R7000P before 1.3.3.140, R7850 before 1.0.5.68, R7900 before 1.0.4.46, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, and XR1000 before 1.0.0.58.
Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, and RBR850 before 3.2.17.12.
Certain NETGEAR devices are affected by authentication bypass. This affects AC2100 before 2021-08-27, AC2400 before 2021-08-27, AC2600 before 2021-08-27, D7000 before 2021-08-27, R6220 before 2021-08-27, R6230 before 2021-08-27, R6260 before 2021-08-27, R6330 before 2021-08-27, R6350 before 2021-08-27, R6700v2 before 2021-08-27, R6800 before 2021-08-27, R6850 before 2021-08-27, R6900v2 before 2021-08-27, R7200 before 2021-08-27, R7350 before 2021-08-27, R7400 before 2021-08-27, and R7450 before 2021-08-27.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, EAX20 before 1.0.0.58, EAX80 before 1.0.1.68, EX7500 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, R6400 before 1.0.1.70, R6400v2 before 1.0.4.118, R6700v3 before 1.0.4.118, R6900P before 1.3.3.140, R7000 before 1.0.11.116, R7000P before 1.3.3.140, R7850 before 1.0.5.68, R7900 before 1.0.4.38, R7900P before 1.4.2.84, R7960P before 1.4.2.84, R8000 before 1.0.4.68, R8000P before 1.4.2.84, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX35v2 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX43 before 1.0.3.96, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBK852 before 3.2.17.12, RBR750 before 3.2.17.12, RBR850 before 3.2.17.12, RBS750 before 3.2.17.12, RBS850 before 3.2.17.12, RS400 before 1.5.1.80, XR1000 before 1.0.0.58, and XR300 before 1.0.3.68.
Certain NETGEAR devices are affected by authentication bypass. This affects CBR40 before 2.5.0.24, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D6220 before 1.0.0.66, D6400 before 1.0.0.100, D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, DC112A before 1.0.0.52, DGN2200v4 before 1.0.0.118, EAX80 before 1.0.1.64, R6250 before 1.0.4.48, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R7960P before 1.4.1.64, R8000 before 1.0.4.62, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, R6400v2 before 1.0.4.106, R7000P before 1.3.2.132, R8000P before 1.4.1.64, RAX20 before 1.0.2.82, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, R6700v3 before 1.0.4.106, R6900P before 1.3.2.132, R7900P before 1.4.1.64, RAX15 before 1.0.2.82, RAX50 before 1.0.2.82, and RAX75 before 1.0.3.106.
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D8500 before 1.0.3.58, R6250 before 1.0.4.48, R7000 before 1.0.11.116, R7100LG before 1.0.0.64, R7900 before 1.0.4.38, R8300 before 1.0.2.144, R8500 before 1.0.2.144, XR300 before 1.0.3.68, R7000P before 1.3.2.132, and R6900P before 1.3.2.132.
Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects DC112A before 1.0.0.52, R6400 before 1.0.1.68, RAX200 before 1.0.3.106, WNDR3400v3 before 1.0.1.38, XR300 before 1.0.3.68, R8500 before 1.0.2.144, RAX75 before 1.0.3.106, R8300 before 1.0.2.144, and RAX80 before 1.0.3.106.
Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects R6260 before 1.1.0.76, R6800 before 1.2.0.62, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, AC2100 before 1.2.0.62, AC2400 before 1.2.0.62, and AC2600 before 1.2.0.62.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7000v2 before 1.0.0.66, D8500 before 1.0.3.58, R7000 before 1.0.11.110, R7100LG before 1.0.0.72, R7900 before 1.0.4.30, R8000 before 1.0.4.62, XR300 before 1.0.3.56, R7000P before 1.3.2.132, R8500 before 1.0.2.144, R6900P before 1.3.2.132, and R8300 before 1.0.2.144.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, EAX20 before 1.0.0.48, EAX80 before 1.0.1.64, EX7500 before 1.0.0.72, R6400 before 1.0.1.68, R6900P before 1.3.2.132, R7000 before 1.0.11.116, R7000P before 1.3.2.132, R7900 before 1.0.4.38, R7960P before 1.4.1.66, R8000 before 1.0.4.66, RAX200 before 1.0.3.106, RS400 before 1.5.1.80, XR300 before 1.0.3.68, MK62 before 1.0.6.110, MR60 before 1.0.6.110, R6400v2 before 1.0.4.106, R8000P before 1.4.1.66, RAX20 before 1.0.2.64, RAX45 before 1.0.2.82, RAX80 before 1.0.3.106, MS60 before 1.0.6.110, R6700v3 before 1.0.4.106, R7900P before 1.4.1.66, RAX15 before 1.0.2.64, RAX50 before 1.0.2.82, RAX75 before 1.0.3.106, RBR750 before 3.2.16.22, RBR850 before 3.2.16.22, RBS750 before 3.2.16.22, RBS850 before 3.2.16.22, RBK752 before 3.2.16.22, and RBK852 before 3.2.16.22.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects CBR40 before 2.5.0.24, CBR750 before 4.6.3.6, D7000v2 before 1.0.0.74, LAX20 before 1.1.6.28, MK62 before 1.0.6.116, MR60 before 1.0.6.116, MS60 before 1.0.6.116, MR80 before 1.1.2.20, MS80 before 1.1.2.20, RAX15 before 1.0.3.96, RAX20 before 1.0.3.96, RAX200 before 1.0.4.120, RAX45 before 1.0.3.96, RAX50 before 1.0.3.96, RAX43 before 1.0.3.96, RAX40v2 before 1.0.3.96, RAX35v2 before 1.0.3.96, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK752 before 3.2.17.12, RBR750 before 3.2.17.12, RBS750 before 3.2.17.12, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, RBS850 before 3.2.17.12, and XR1000 before 1.0.0.58.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR1020 before 2.6.3.58, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RBS50Y before 2.7.3.22, WNR2000v5 before 1.0.0.76, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, RAX10 before 1.0.2.88, RAX120 before 1.2.0.16, RAX70 before 1.0.2.88, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, R6700AX before 1.0.2.88, RAX120v2 before 1.2.0.16, RAX78 before 1.0.2.88, EX6410 before 1.0.0.134, RBR10 before 2.7.3.22, RBR20 before 2.7.3.22, RBR350 before 4.3.4.7, RBR40 before 2.7.3.22, RBR50 before 2.7.3.22, EX6420 before 1.0.0.134, RBS10 before 2.7.3.22, RBS20 before 2.7.3.22, RBS350 before 4.3.4.7, RBS40 before 2.7.3.22, RBS50 before 2.7.3.22, EX6400v2 before 1.0.0.134, RBK12 before 2.7.3.22, RBK20 before 2.7.3.22, RBK352 before 4.3.4.7, RBK40 before 2.7.3.22, and RBK50 before 2.7.3.22.
NETGEAR has released fixes for a pre-authentication command injection in request_handler.php security vulnerability on the following product models: WC7500, running firmware versions prior to 6.5.3.5; WC7520, running firmware versions prior to 2.5.0.46; WC7600v1, running firmware versions prior to 6.5.3.5; WC7600v2, running firmware versions prior to 6.5.3.5; and WC9500, running firmware versions prior to 6.5.3.5.
NETGEAR D7000 devices before 1.0.1.68 are affected by authentication bypass.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.64, EX6200v2 before 1.0.1.86, EX6250 before 1.0.0.134, EX7700 before 1.0.0.216, EX8000 before 1.0.1.232, LBR20 before 2.6.3.50, R7800 before 1.0.2.80, R8900 before 1.0.5.26, R9000 before 1.0.5.26, RAX120 before 1.2.0.16, RBS50Y before 1.0.0.56, WNR2000v5 before 1.0.0.76, XR450 before 2.3.2.114, XR500 before 2.3.2.114, XR700 before 1.0.1.36, EX6150v2 before 1.0.1.98, EX7300 before 1.0.2.158, EX7320 before 1.0.0.134, EX6100v2 before 1.0.1.98, EX6400 before 1.0.2.158, EX7300v2 before 1.0.0.134, EX6410 before 1.0.0.134, RBR10 before 2.6.1.44, RBR20 before 2.6.2.104, RBR40 before 2.6.2.104, RBR50 before 2.7.2.102, EX6420 before 1.0.0.134, RBS10 before 2.6.1.44, RBS20 before 2.6.2.104, RBS40 before 2.6.2.104, RBS50 before 2.7.2.102, EX6400v2 before 1.0.0.134, RBK12 before 2.6.1.44, RBK20 before 2.6.2.104, RBK40 before 2.6.2.104, and RBK50 before 2.7.2.102.
Certain D-Link, Edimax, NETGEAR, TP-Link, Tenda, and Western Digital devices are affected by an integer overflow by an unauthenticated attacker. Remote code execution from the WAN interface (TCP port 20005) cannot be ruled out; however, exploitability was judged to be of "rather significant complexity" but not "impossible." The overflow is in SoftwareBus_dispatchNormalEPMsgOut in the KCodes NetUSB kernel module. Affected NETGEAR devices are D7800 before 1.0.1.68, R6400v2 before 1.0.4.122, and R6700v3 before 1.0.4.122.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26.
Certain NETGEAR devices are affected by authentication bypass. This affects RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, RBS850 before 3.2.10.11, CBR40 before 2.5.0.10, EAX20 before 1.0.0.48, MK62 before 1.0.6.110, MR60 before 1.0.6.110, MS60 before 1.0.6.110, RBK752 before 3.2.10.10, RBR750 before 3.2.10.10, and RBS750 before 3.2.10.10.
NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261.
Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK40 before 2.5.1.16, RBR40 before 2.5.1.16, RBS40 before 2.5.1.16, RBK20 before 2.5.1.16, RBR20 before 2.5.1.16, RBS20 before 2.5.1.16, RBK50 before 2.5.1.16, RBR50 before 2.5.1.16, RBS50 before 2.5.1.16, and RBS50Y before 2.6.1.40.
ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request.
NETGEAR WAC104 devices before 1.0.4.15 are affected by an authentication bypass vulnerability in /usr/sbin/mini_httpd, allowing an unauthenticated attacker to invoke any action by adding the ¤tsetting.htm substring to the HTTP query, a related issue to CVE-2020-27866. This directly allows the attacker to change the web UI password, and eventually to enable debug mode (telnetd) and gain a shell on the device as the admin limited-user account (however, escalation to root is simple because of weak permissions on the /etc/ directory).
Certain NETGEAR devices are affected by command execution. This affects M4200-10MG-POE+ 12.0.2.11 and earlier, M4300-28G 12.0.2.11 and earlier, M4300-52G 12.0.2.11 and earlier, M4300-28G-POE+ 12.0.2.11 and earlier, M4300-52G-POE+ 12.0.2.11 and earlier, M4300-8X8F 12.0.2.11 and earlier, M4300-12X12F 12.0.2.11 and earlier, M4300-24X24F 12.0.2.11 and earlier, M4300-24X 12.0.2.11 and earlier, and M4300-48X 12.0.2.11 and earlier.
Buffer Overflow in Netgear R8000 Router with firmware v1.0.4.56 allows remote attackers to execute arbitrary code or cause a denial-of-service by sending a crafted POST to '/bd_genie_create_account.cgi' with a sufficiently long parameter 'register_country'.