An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), M(6.0), and N(7.0) software. There is a buffer overflow in the fps sysfs entry. The Samsung ID is SVE-2016-7510 (January 2017).

Extreme Networks IQ Engine before 10.6r1a, and through 10.6r4 before 10.6r5, has a buffer overflow. This issue arises from the ah_webui service, which listens on TCP port 3009 by default.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. A buffer overflow existed in the vaultServer component. This was exploitable by a remote unauthenticated attacker.

Buffer overflow vulnerability in function jsvGetStringChars in Espruino before RELEASE_2V09, allows remote attackers to execute arbitrary code.

A buffer overflow in the RTSP service of the Ambarella Oryx RTSP Server 2020-01-07 allows an unauthenticated attacker to send a crafted RTSP request, with a long digest authentication header, to execute arbitrary code in parse_authentication_header() in libamprotocol-rtsp.so.1 in rtsp_svc (or cause a crash). This allows remote takeover of a Furbo Dog Camera, for example. NOTE: The vendor states that the RTSP library is used for DEMO only, using it in product is a customer's behavior. Ambarella has emphasized that RTSP is DEMO only library, should NOT be used in product in our document. Because Ambarella's SDK is proprietary, we didn't publish our SDK source code in public network.

hutool v5.8.21 was discovered to contain a buffer overflow via the component jsonArray.

There are multiple buffer overflow vulnerabilities that could lead to unauthenticated remote code execution by sending especially crafted packets destined to the PAPI (Aruba Networks AP management protocol) UDP port (8211) of access-points or controllers in Aruba 9000 Gateway; Aruba 7000 Series Mobility Controllers; Aruba 7200 Series Mobility Controllers version(s): 2.1.0.1, 2.2.0.0 and below; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below; 6.4.4.23, 6.5.4.17, 8.2.2.9, 8.3.0.13, 8.5.0.10, 8.6.0.5, 8.7.0.0 and below.

A buffer overflow vulnerability in PAN-OS allows an unauthenticated attacker to disrupt system processes and potentially execute arbitrary code with root privileges by sending a malicious request to the Captive Portal or Multi-Factor Authentication interface. This issue impacts: All versions of PAN-OS 8.0; PAN-OS 8.1 versions earlier than PAN-OS 8.1.15; PAN-OS 9.0 versions earlier than PAN-OS 9.0.9; PAN-OS 9.1 versions earlier than PAN-OS 9.1.3.

A buffer overflow was discovered on Realtek RTL8195AM devices before 2.0.10. It exists in the client code when processing a malformed IE length of HT capability information in the Beacon and Association response frame.

Buffer overflow vulnerability in function NumberToPrecisionCmd in jsish before 3.0.7, allows remote attackers to execute arbitrary code.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the FILECODE parameter on login.

Buffer Copy without Checking Size of Input ('Classic Buffer Overflow'), Out-of-bounds Write, Download of Code Without Integrity Check vulnerability in Silicon Labs Gecko Bootloader on ARM (Firmware Update File Parser modules) allows Code Injection, Authentication Bypass.This issue affects "Standalone" and "Application" versions of Gecko Bootloader.

Buffer Overflow found in Nginx NJS allows a remote attacker to execute arbitrary code via the njs_object_property parameter of the njs/njs_vm.c function.

Buffer overflow vulnerability in Core FTP Server v1.2 Build 583, via a crafted username.

Buffer overflow vulnerability in DLINK 619L version B 2.06beta via the curTime parameter on login.

Buffer overflow vulnerability in framework/init.php in qinggan phpok 5.1, allows attackers to execute arbitrary code.

ClamAV before 0.97.7 has buffer overflow in the libclamav component

In Yokogawa WideField3 R1.01 - R4.03, a buffer overflow could be caused when a user loads a maliciously crafted project file.

An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple buffer overflow vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. (The set of affected scripts is similar to CVE-2020-12266.)

On Juniper Networks SRX Series with ICAP (Internet Content Adaptation Protocol) redirect service enabled, processing a malformed HTTP message can lead to a Denial of Service (DoS) or Remote Code Execution (RCE) Continued processing of this malformed HTTP message may result in an extended Denial of Service (DoS) condition. The offending HTTP message that causes this issue may originate both from the HTTP server or the HTTP client. This issue affects Juniper Networks Junos OS on SRX Series: 18.1 versions prior to 18.1R3-S9 ; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3; 18.3 versions prior to 18.3R1-S7, 18.3R2-S4, 18.3R3-S1; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3; 19.1 versions prior to 19.1R1-S5, 19.1R2; 19.2 versions prior to 19.2R1-S2, 19.2R2; 19.3 versions prior to 19.3R2. This issue does not affect Juniper Networks Junos OS prior to 18.1R1.

A buffer overflow in the M_LoadDefaults function in m_misc.c in id Tech 1 (aka Doom engine) allows arbitrary code execution via an unsafe usage of fscanf, because it does not limit the number of characters to be read in a format argument.

In ACCEL-PPP (an implementation of PPTP/PPPoE/L2TP/SSTP), there is a buffer overflow when receiving an l2tp control packet ith an AVP which type is a string and no hidden flags, length set to less than 6. If your application is used in open networks or there are untrusted nodes in the network it is highly recommended to apply the patch. The problem was patched with commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b As a workaround changes of commit 2324bcd5ba12cf28f47357a8f03cd41b7c04c52b can be applied to older versions.

The server in Chocolate Doom 3.0.0 and Crispy Doom 5.8.0 doesn't validate the user-controlled num_players value, leading to a buffer overflow. A malicious user can overwrite the server's stack.

A vulnerability, which was classified as critical, was found in FreeFloat FTP Server 1.0. This affects an unknown part of the component RETR Command Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Sophos XG Firewall 17.x through v17.5 MR12 allows a Buffer Overflow and remote code execution via the HTTP/S Bookmarks feature for clientless access. Hotfix HF062020.1 was published for all firewalls running v17.x.

Static HTTP Server 1.0 has a Local Overflow

BusyBox project BusyBox wget version prior to commit 8e2174e9bd836e53c8b9c6e00d1bc6e2a718686e contains a Buffer Overflow vulnerability in Busybox wget that can result in heap buffer overflow. This attack appear to be exploitable via network connectivity. This vulnerability appears to have been fixed in after commit 8e2174e9bd836e53c8b9c6e00d1bc6e2a718686e.

HCL Domino is susceptible to a Buffer Overflow vulnerability in DXL due to improper validation of user input. A successful exploit could enable an attacker to crash Domino or execute attacker-controlled code on the server system.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/SetNetControlList list parameter for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

There is a buffer overflow in librsa.so called by getwifipwdurl interface, resulting in code execution on Xiaomi router AX3600 with ROM version =rom< 1.1.12.

An issue was discovered on LG mobile devices with Android OS 7.2, 8.0, 8.1, 9, and 10 (MTK chipsets). Code execution can occur via an MTK AT command handler buffer overflow. The LG ID is LVE-SMP-200008 (June 2020).

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/setcfm funcpara1 parameter for a POST request, a value is directly used in a sprintf to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

A Buffer Overflow vulnerabilitiy exists in TP-LINK WR-886N 20190826 2.3.8 in the /cloud_config/router_post/register feature, which allows malicious users to execute arbitrary code on the system via a crafted post request.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/openSchedWifi schedStartTime and schedEndTime parameters for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

An issue was discovered in janus-gateway (aka Janus WebRTC Server) through 0.10.0. janus_streaming_rtsp_parse_sdp in plugins/janus_streaming.c has a Buffer Overflow via a crafted RTSP server.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/addressNat entrys and mitInterface parameters for a POST request, a value is directly used in a sprintf to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

In NetHack before 3.6.5, an invalid extended command in value for the AUTOCOMPLETE configuration file option can cause a buffer overflow resulting in a crash or remote code execution/privilege escalation. This vulnerability affects systems that have NetHack installed suid/sgid and shared systems that allow users to upload their own configuration files. Users should upgrade to NetHack 3.6.5.

Buffer Overflow vulnerability in tvnviewer.exe of TightVNC Viewer allows a remote attacker to execute arbitrary instructions via a crafted FramebufferUpdate packet from a VNC server.

Buffer overflow in CHICKEN 4.9.0 and 4.9.0.1 may allow remote attackers to execute arbitrary code via the 'select' function.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote GetDumpFile command that could allow a user to attempt various attacks. In non-secure mode, the user is unauthenticated

A buffer overflow in ecma_builtin_typedarray_prototype_filter() in JerryScript version fe3a5c0 allows an attacker to construct a fake object or a fake arraybuffer with unlimited size.

A buffer overflow vulnerability in stm32_mw_usb_host of STMicroelectronics in versions before 3.5.1 allows an attacker to execute arbitrary code when the descriptor contains more endpoints than USBH_MAX_NUM_ENDPOINTS. The library is typically integrated when using a RTOS such as FreeRTOS on STM32 MCUs.

Buffer overflow in PJSUA API when calling pjsua_call_dump. An attacker-controlled 'buffer' argument may cause a buffer overflow, since supplying an output buffer smaller than 128 characters may overflow the output buffer, regardless of the 'maxlen' argument supplied

A vulnerability was found in H3C GR-5400AX up to 100R008 and classified as critical. Affected by this issue is the function EditWlanMacList of the file /routing/goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been rated as critical. This issue affects some unknown processing of the component BELL Command Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. This issue affects some unknown processing of the component MKDIR Command Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Broadcom Emulex HBA Manager/One Command Manager versions before 11.4.425.0 and 12.8.542.31, if not installed in Strictly Local Management mode, have a buffer overflow vulnerability in the remote firmware download feature that could allow remote unauthenticated users to perform various attacks. In non-secure mode, the user is unauthenticated.

A vulnerability classified as critical has been found in FreeFloat FTP Server 1.0. Affected is an unknown function of the component STATUS Command Handler. The manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Apache HTTP server 2.4.32 to 2.4.44 mod_proxy_uwsgi info disclosure and possible RCE

A vulnerability was found in FreeFloat FTP Server 1.0.0 and classified as critical. Affected by this issue is some unknown functionality of the component GET Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.