In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check stream id dml21 wrapper to get plane_id [Why & How] Fix a false positive warning which occurs due to lack of correct checks when querying plane_id in DML21. This fixes the warning when performing a mode1 reset (cat /sys/kernel/debug/dri/1/amdgpu_gpu_recover): [ 35.751250] WARNING: CPU: 11 PID: 326 at /tmp/amd.PHpyAl7v/amd/amdgpu/../display/dc/dml2/dml2_dc_resource_mgmt.c:91 dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751434] Modules linked in: amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) amddrm_buddy(OE) amdxcp(OE) amddrm_exec(OE) amd_sched(OE) amdkcl(OE) drm_suballoc_helper drm_ttm_helper ttm drm_display_helper cec rc_core i2c_algo_bit rfcomm qrtr cmac algif_hash algif_skcipher af_alg bnep amd_atl intel_rapl_msr intel_rapl_common snd_hda_codec_hdmi snd_hda_intel edac_mce_amd snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm_amd snd_hda_core snd_hwdep snd_pcm kvm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul polyval_clmulni polyval_generic btusb ghash_clmulni_intel sha256_ssse3 btrtl sha1_ssse3 snd_seq btintel aesni_intel btbcm btmtk snd_seq_device crypto_simd sunrpc cryptd bluetooth snd_timer ccp binfmt_misc rapl snd i2c_piix4 wmi_bmof gigabyte_wmi k10temp i2c_smbus soundcore gpio_amdpt mac_hid sch_fq_codel msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 hid_generic usbhid hid crc32_pclmul igc ahci xhci_pci libahci xhci_pci_renesas video wmi [ 35.751501] CPU: 11 UID: 0 PID: 326 Comm: kworker/u64:9 Tainted: G OE 6.11.0-21-generic #21~24.04.1-Ubuntu [ 35.751504] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 35.751505] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F30 05/22/2024 [ 35.751506] Workqueue: amdgpu-reset-dev amdgpu_debugfs_reset_work [amdgpu] [ 35.751638] RIP: 0010:dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751794] Code: 6d 0c 00 00 8b 84 24 88 00 00 00 41 3b 44 9c 20 0f 84 fc 07 00 00 48 83 c3 01 48 83 fb 06 75 b3 4c 8b 64 24 68 4c 8b 6c 24 40 <0f> 0b b8 06 00 00 00 49 8b 94 24 a0 49 00 00 89 c3 83 f8 07 0f 87 [ 35.751796] RSP: 0018:ffffbfa3805d7680 EFLAGS: 00010246 [ 35.751798] RAX: 0000000000010000 RBX: 0000000000000006 RCX: 0000000000000000 [ 35.751799] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [ 35.751800] RBP: ffffbfa3805d78f0 R08: 0000000000000000 R09: 0000000000000000 [ 35.751801] R10: 0000000000000000 R11: 0000000000000000 R12: ffffbfa383249000 [ 35.751802] R13: ffffa0e68f280000 R14: ffffbfa383249658 R15: 0000000000000000 [ 35.751803] FS: 0000000000000000(0000) GS:ffffa0edbe580000(0000) knlGS:0000000000000000 [ 35.751804] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 35.751805] CR2: 00005d847ef96c58 CR3: 000000041de3e000 CR4: 0000000000f50ef0 [ 35.751806] PKRU: 55555554 [ 35.751807] Call Trace: [ 35.751810] <TASK> [ 35.751816] ? show_regs+0x6c/0x80 [ 35.751820] ? __warn+0x88/0x140 [ 35.751822] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.751964] ? report_bug+0x182/0x1b0 [ 35.751969] ? handle_bug+0x6e/0xb0 [ 35.751972] ? exc_invalid_op+0x18/0x80 [ 35.751974] ? asm_exc_invalid_op+0x1b/0x20 [ 35.751978] ? dml2_map_dc_pipes+0x243d/0x3f40 [amdgpu] [ 35.752117] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752256] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752260] ? math_pow+0x48/0xa0 [amdgpu] [ 35.752400] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752403] ? math_pow+0x11/0xa0 [amdgpu] [ 35.752524] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752526] ? core_dcn4_mode_programming+0xe4d/0x20d0 [amdgpu] [ 35.752663] ? srso_alias_return_thunk+0x5/0xfbef5 [ 35.752669] dml21_validate+0x3d4/0x980 [amdgpu] (cherry picked from commit f8ad62c0a93e5dd94243e10f1b742232e4d6411e)

In the Linux kernel, the following vulnerability has been resolved: tracing: fprobe events: Fix possible UAF on modules Commit ac91052f0ae5 ("tracing: tprobe-events: Fix leakage of module refcount") moved try_module_get() from __find_tracepoint_module_cb() to find_tracepoint() caller, but that introduced a possible UAF because the module can be unloaded before try_module_get(). In this case, the module object should be freed too. Thus, try_module_get() does not only fail but may access to the freed object. To avoid that, try_module_get() in __find_tracepoint_module_cb() again.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix UAF when reloading module hda_generic_machine_select() appends -idisp to the tplg filename by allocating a new string with devm_kasprintf(), then stores the string right back into the global variable snd_soc_acpi_intel_hda_machines. When the module is unloaded, this memory is freed, resulting in a global variable pointing to freed memory. Reloading the module then triggers a use-after-free: BUG: KFENCE: use-after-free read in string+0x48/0xe0 Use-after-free read at 0x00000000967e0109 (in kfence-#99): string+0x48/0xe0 vsnprintf+0x329/0x6e0 devm_kvasprintf+0x54/0xb0 devm_kasprintf+0x58/0x80 hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic] sof_probe_work+0x7f/0x600 [snd_sof] process_one_work+0x17b/0x330 worker_thread+0x2ce/0x3f0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 kfence-#99: 0x00000000198a940f-0x00000000ace47d9d, size=64, cache=kmalloc-64 allocated by task 333 on cpu 8 at 17.798069s (130.453553s ago): devm_kmalloc+0x52/0x120 devm_kvasprintf+0x66/0xb0 devm_kasprintf+0x58/0x80 hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic] sof_probe_work+0x7f/0x600 [snd_sof] process_one_work+0x17b/0x330 worker_thread+0x2ce/0x3f0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 freed by task 1543 on cpu 4 at 141.586686s (6.665010s ago): release_nodes+0x43/0xb0 devres_release_all+0x90/0xf0 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1c1/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x42/0xb0 __do_sys_delete_module+0x1d1/0x310 do_syscall_64+0x82/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it by copying the match array with devm_kmemdup_array() before we modify it.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create() The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context. Following kernel warning and stack trace: [ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289 [ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38 [ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0 [ 31.745181] [ T2289] Tainted: [W]=WARN [ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT) [ 31.745188] [ T2289] Call trace: [ 31.745191] [ T2289] show_stack+0x28/0x40 (C) [ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198 [ 31.745205] [ T2289] dump_stack+0x20/0x50 [ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0 [ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38 [ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745246] [ T2289] platform_probe+0x98/0xe0 [ 31.745254] [ T2289] really_probe+0x144/0x3f8 [ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180 [ 31.745261] [ T2289] driver_probe_device+0x54/0x268 [ 31.745264] [ T2289] __driver_attach+0x11c/0x288 [ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160 [ 31.745274] [ T2289] driver_attach+0x34/0x50 [ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0 [ 31.745281] [ T2289] driver_register+0x78/0x120 [ 31.745285] [ T2289] __platform_driver_register+0x30/0x48 [ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745298] [ T2289] do_one_initcall+0x11c/0x438 [ 31.745303] [ T2289] do_init_module+0x68/0x228 [ 31.745311] [ T2289] load_module+0x118c/0x13a8 [ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390 [ 31.745320] [ T2289] invoke_syscall+0x74/0x108 [ 31.745326] [ T2289] el0_svc_common+0x90/0xf8 [ 31.745330] [ T2289] do_el0_svc+0x2c/0x48 [ 31.745333] [ T2289] el0_svc+0x60/0x150 [ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118 [ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0 Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts.

A flaw was found in the crypto subsystem of the Linux kernel before version kernel-4.15-rc4. The "null skcipher" was being dropped when each af_alg_ctx was freed instead of when the aead_tfm was freed. This can cause the null skcipher to be freed while it is still in use leading to a local user being able to crash the system or possibly escalate privileges.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in session logoff The sess->user object can currently be in use by another thread, for example if another connection has sent a session setup request to bind to the session being free'd. The handler for that connection could be in the smb2_sess_setup function which makes use of sess->user.

In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Avoid buffer overflow in current_password_store() If the 'buf' array received from the user contains an empty string, the 'length' variable will be zero. Accessing the 'buf' array element with index 'length - 1' will result in a buffer overflow. Add a check for an empty string. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix double put of request If a netfs request finishes during the pause loop, it will have the ref that belongs to the IN_PROGRESS flag removed at that point - however, if it then goes to the final wait loop, that will *also* put the ref because it sees that the IN_PROGRESS flag is clear and incorrectly assumes that this happened when it called the collector. In fact, since IN_PROGRESS is clear, we shouldn't call the collector again since it's done all the cleanup, such as calling ->ki_complete(). Fix this by making netfs_collect_in_app() just return, indicating that we're done if IN_PROGRESS is removed.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class handling This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class handling. The issue occurs due to a time-of-check/time-of-use condition in hfsc_change_class() when working with certain child qdiscs like netem or codel. The vulnerability works as follows: 1. hfsc_change_class() checks if a class has packets (q.qlen != 0) 2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g., codel, netem) might drop packets and empty the queue 3. The code continues assuming the queue is still non-empty, adding the class to vttree 4. This breaks HFSC scheduler assumptions that only non-empty classes are in vttree 5. Later, when the class is destroyed, this can lead to a Use-After-Free The fix adds a second queue length check after qdisc_peek_len() to verify the queue wasn't emptied.

In the Linux kernel, the following vulnerability has been resolved: ublk: santizize the arguments from userspace when adding a device Sanity check the values for queue depth and number of queues we get from userspace when adding a device.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix nested key length validation in the set() action It's not safe to access nla_len(ovs_key) if the data is smaller than the netlink header. Check that the attribute is OK first.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Avoid using sk_socket after free when sending The sk->sk_socket is not locked or referenced in backlog thread, and during the call to skb_send_sock(), there is a race condition with the release of sk_socket. All types of sockets(tcp/udp/unix/vsock) will be affected. Race conditions: ''' CPU0 CPU1 backlog::skb_send_sock sendmsg_unlocked sock_sendmsg sock_sendmsg_nosec close(fd): ... ops->release() -> sock_map_close() sk_socket->ops = NULL free(socket) sock->ops->sendmsg ^ panic here ''' The ref of psock become 0 after sock_map_close() executed. ''' void sock_map_close() { ... if (likely(psock)) { ... // !! here we remove psock and the ref of psock become 0 sock_map_remove_links(sk, psock) psock = sk_psock_get(sk); if (unlikely(!psock)) goto no_psock; <=== Control jumps here via goto ... cancel_delayed_work_sync(&psock->work); <=== not executed sk_psock_put(sk, psock); ... } ''' Based on the fact that we already wait for the workqueue to finish in sock_map_close() if psock is held, we simply increase the psock reference count to avoid race conditions. With this patch, if the backlog thread is running, sock_map_close() will wait for the backlog thread to complete and cancel all pending work. If no backlog running, any pending work that hasn't started by then will fail when invoked by sk_psock_get(), as the psock reference count have been zeroed, and sk_psock_drop() will cancel all jobs via cancel_delayed_work_sync(). In summary, we require synchronization to coordinate the backlog thread and close() thread. The panic I catched: ''' Workqueue: events sk_psock_backlog RIP: 0010:sock_sendmsg+0x21d/0x440 RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001 ... Call Trace: <TASK> ? die_addr+0x40/0xa0 ? exc_general_protection+0x14c/0x230 ? asm_exc_general_protection+0x26/0x30 ? sock_sendmsg+0x21d/0x440 ? sock_sendmsg+0x3e0/0x440 ? __pfx_sock_sendmsg+0x10/0x10 __skb_send_sock+0x543/0xb70 sk_psock_backlog+0x247/0xb80 ... '''

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. Similar to: b541ba7d1f5a ("netfilter: conntrack: clamp maximum hashtable size to INT_MAX")

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue When the task management thread processes reply queues while the reset thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as unrecoverable.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check validity of "num_cpu" from user space The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about irqchip EIOINTC, here add validation about cpu number to avoid array pointer overflow.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix a use-after-free in r535_gsp_rpc_push() The RPC container is released after being passed to r535_gsp_rpc_send(). When sending the initial fragment of a large RPC and passing the caller's RPC container, the container will be freed prematurely. Subsequent attempts to send remaining fragments will therefore result in a use-after-free. Allocate a temporary RPC container for holding the initial fragment of a large RPC when sending. Free the caller's container when all fragments are successfully sent. [ Rebase onto Blackwell changes. - Danilo ]

In the Linux kernel, the following vulnerability has been resolved: fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create anonymous inodes with proper security context. This replaces the current pattern of calling alloc_anon_inode() followed by inode_init_security_anon() for creating security context manually. This change also fixes a security regression in secretmem where the S_PRIVATE flag was not cleared after alloc_anon_inode(), causing LSM/SELinux checks to be bypassed for secretmem file descriptors. As guest_memfd currently resides in the KVM module, we need to export this symbol for use outside the core kernel. In the future, guest_memfd might be moved to core-mm, at which point the symbols no longer would have to be exported. When/if that happens is still unclear.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: take paired job reference For paired jobs, have the fragment job take a reference on the geometry job, so that the geometry job cannot be freed until the fragment job has finished with it. The geometry job structure is accessed when the fragment job is being prepared by the GPU scheduler. Taking the reference prevents the geometry job being freed until the fragment job no longer requires it. Fixes a use after free bug detected by KASAN: [ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr] [ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request Make sure that n_channels is set after allocating the struct cfg80211_registered_device::int_scan_req member. Seen with syzkaller: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5 index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]') This was missed in the initial conversions because I failed to locate the allocation likely due to the "sizeof(void *)" not matching the "channels" array type.

In the Linux kernel, the following vulnerability has been resolved: codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog() After making all ->qlen_notify() callbacks idempotent, now it is safe to remove the check of qlen!=0 from both fq_codel_dequeue() and codel_qdisc_dequeue().

In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac.

In the Linux kernel, the following vulnerability has been resolved: fbcon: Make sure modelist not set on unregistered console It looks like attempting to write to the "store_modes" sysfs node will run afoul of unregistered consoles: UBSAN: array-index-out-of-bounds in drivers/video/fbdev/core/fbcon.c:122:28 index -1 is out of range for type 'fb_info *[32]' ... fbcon_info_from_console+0x192/0x1a0 drivers/video/fbdev/core/fbcon.c:122 fbcon_new_modelist+0xbf/0x2d0 drivers/video/fbdev/core/fbcon.c:3048 fb_new_modelist+0x328/0x440 drivers/video/fbdev/core/fbmem.c:673 store_modes+0x1c9/0x3e0 drivers/video/fbdev/core/fbsysfs.c:113 dev_attr_store+0x55/0x80 drivers/base/core.c:2439 static struct fb_info *fbcon_registered_fb[FB_MAX]; ... static signed char con2fb_map[MAX_NR_CONSOLES]; ... static struct fb_info *fbcon_info_from_console(int console) ... return fbcon_registered_fb[con2fb_map[console]]; If con2fb_map contains a -1 things go wrong here. Instead, return NULL, as callers of fbcon_info_from_console() are trying to compare against existing "info" pointers, so error handling should kick in correctly.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: mm, slab: clean up slab->obj_exts always When memory allocation profiling is disabled at runtime or due to an error, shutdown_mem_profiling() is called: slab->obj_exts which previously allocated remains. It won't be cleared by unaccount_slab() because of mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts should always be cleaned up in unaccount_slab() to avoid following error: [...]BUG: Bad page state in process... .. [...]page dumped because: page still charged to cgroup [andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]

In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: move the limit validation It is not sufficient to directly validate the limit on the data that the user passes as it can be updated based on how the other parameters are changed. Move the check at the end of the configuration update process to also catch scenarios where the limit is indirectly updated, for example with the following configurations: tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1 tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1 This fixes the following syzkaller reported crash: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6 index 65535 is out of range for type 'struct sfq_head[128]' CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429 sfq_link net/sched/sch_sfq.c:203 [inline] sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline] dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: fix PM resume warning Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nan ---truncated---

An issue was discovered in the Linux kernel through 4.17.11, as used in Xen through 4.11.x. The xen_failsafe_callback entry point in arch/x86/entry/entry_64.S does not properly maintain RBX, which allows local users to cause a denial of service (uninitialized memory usage and system crash). Within Xen, 64-bit x86 PV Linux guest OS users can trigger a guest OS crash or possibly gain privileges.

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default.

In the Linux kernel, the following vulnerability has been resolved: jfs: validate AG parameters in dbMount() to prevent crashes Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch corrupted metadata early and avoid undefined behavior in dbAllocAG. Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE: - agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift (L2LPERCTL - 2*agheight) >= 0. - agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight)) ensures agperlev >= 1. - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5). - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG; 2^(10 - 2*agheight) prevents division to 0. - agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within stree (size 1365). - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8). UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9 shift exponent -335544310 is negative CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent out-of-bounds stream writes by validating *pos ksmbd_vfs_stream_write() did not validate whether the write offset (*pos) was within the bounds of the existing stream data length (v_len). If *pos was greater than or equal to v_len, this could lead to an out-of-bounds memory write. This patch adds a check to ensure *pos is less than v_len before proceeding. If the condition fails, -EINVAL is returned.

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in taprio_dev_notifier Since taprio’s taprio_dev_notifier() isn’t protected by an RCU read-side critical section, a race with advance_sched() can lead to a use-after-free. Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a potential UAF in hfsc_dequeue() too Similarly to the previous patch, we need to safe guard hfsc_dequeue() too. But for this one, we don't have a reliable reproducer.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix slab-use-after-free in hdcp The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector objects without incrementing the kref reference counts. When using a USB-C dock, and the dock is unplugged, the corresponding amdgpu_dm_connector objects are freed, creating dangling pointers in the HDCP code. When the dock is plugged back, the dangling pointers are dereferenced, resulting in a slab-use-after-free: [ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10 [ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233 [ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024 [ 66.776186] Workqueue: events event_property_validate [amdgpu] [ 66.776494] Call Trace: [ 66.776496] <TASK> [ 66.776497] dump_stack_lvl+0x70/0xa0 [ 66.776504] print_report+0x175/0x555 [ 66.776507] ? __virt_addr_valid+0x243/0x450 [ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0 [ 66.776515] kasan_report+0xeb/0x1c0 [ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777121] __asan_report_load4_noabort+0x14/0x20 [ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777342] ? __lock_acquire+0x6b40/0x6b40 [ 66.777347] ? enable_assr+0x250/0x250 [amdgpu] [ 66.777571] process_one_work+0x86b/0x1510 [ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0 [ 66.777578] ? assign_work+0x16b/0x280 [ 66.777580] ? lock_is_held_type+0xa3/0x130 [ 66.777583] worker_thread+0x5c0/0xfa0 [ 66.777587] ? process_one_work+0x1510/0x1510 [ 66.777588] kthread+0x3a2/0x840 [ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777594] ? trace_hardirqs_on+0x4f/0x60 [ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60 [ 66.777599] ? calculate_sigpending+0x77/0xa0 [ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777605] ret_from_fork+0x40/0x90 [ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777609] ret_from_fork_asm+0x11/0x20 [ 66.777614] </TASK> [ 66.777643] Allocated by task 10: [ 66.777646] kasan_save_stack+0x39/0x60 [ 66.777649] kasan_save_track+0x14/0x40 [ 66.777652] kasan_save_alloc_info+0x37/0x50 [ 66.777655] __kasan_kmalloc+0xbb/0xc0 [ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0 [ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu] [ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper] [ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper] [ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper] [ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper] [ 66.777917] process_one_work+0x86b/0x1510 [ 66.777919] worker_thread+0x5c0/0xfa0 [ 66.777922] kthread+0x3a2/0x840 [ 66.777925] ret_from_fork+0x40/0x90 [ 66.777927] ret_from_fork_asm+0x11/0x20 [ 66.777932] Freed by task 1713: [ 66.777935] kasan_save_stack+0x39/0x60 [ 66.777938] kasan_save_track+0x14/0x40 [ 66.777940] kasan_save_free_info+0x3b/0x60 [ 66.777944] __kasan_slab_free+0x52/0x70 [ 66.777946] kfree+0x13f/0x4b0 [ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu] [ 66.778179] drm_connector_free+0x7d/0xb0 [ 66.778184] drm_mode_object_put.part.0+0xee/0x160 [ 66.778188] drm_mode_object_put+0x37/0x50 [ 66.778191] drm_atomic_state_default_clear+0x220/0xd60 [ 66.778194] __drm_atomic_state_free+0x16e/0x2a0 [ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0 [ 66.778200] drm_ioctl_kernel+0x17a/0x310 [ 66.778203] drm_ioctl+0x584/0xd10 [ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu] [ 66.778375] __x64_sys_ioctl+0x139/0x1a0 [ 66.778378] x64_sys_call+0xee7/0xfb0 [ 66.778381] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to avoid crashes like bellow: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406 Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341 CPU: 0 UID: 0 PID: 5341 Comm: kworker/u5:5 Not tainted 6.15.0-syzkaller-10402-g4cb6c8af8591 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406 hci_cmd_sync_work+0x261/0x3a0 net/bluetooth/hci_sync.c:334 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xade/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x711/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 5987: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] mgmt_pending_new+0x65/0x240 net/bluetooth/mgmt_util.c:252 mgmt_pending_add+0x34/0x120 net/bluetooth/mgmt_util.c:279 remove_adv_monitor+0x103/0x1b0 net/bluetooth/mgmt.c:5454 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 sock_write_iter+0x258/0x330 net/socket.c:1131 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x548/0xa90 fs/read_write.c:686 ksys_write+0x145/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5989: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x62/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2380 [inline] slab_free mm/slub.c:4642 [inline] kfree+0x18e/0x440 mm/slub.c:4841 mgmt_pending_foreach+0xc9/0x120 net/bluetooth/mgmt_util.c:242 mgmt_index_removed+0x10d/0x2f0 net/bluetooth/mgmt.c:9366 hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314 __sys_bind_socket net/socket.c:1810 [inline] __sys_bind+0x2c3/0x3e0 net/socket.c:1841 __do_sys_bind net/socket.c:1846 [inline] __se_sys_bind net/socket.c:1844 [inline] __x64_sys_bind+0x7a/0x90 net/socket.c:1844 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: mtd: inftlcore: Add error check for inftl_read_oob() In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails.

In the Linux kernel, the following vulnerability has been resolved: binder: fix yet another UAF in binder_devices Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") addressed a use-after-free where devices could be released without first being removed from the binder_devices list. However, there is a similar path in binder_free_proc() that was missed: ================================================================== BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100 Write of size 8 at addr ffff0000c773b900 by task umount/467 CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_remove_device+0xd4/0x100 binderfs_evict_inode+0x230/0x2f0 evict+0x25c/0x5dc iput+0x304/0x480 dentry_unlink_inode+0x208/0x46c __dentry_kill+0x154/0x530 [...] Allocated by task 463: __kmalloc_cache_noprof+0x13c/0x324 binderfs_binder_device_create.isra.0+0x138/0xa60 binder_ctl_ioctl+0x1ac/0x230 [...] Freed by task 215: kfree+0x184/0x31c binder_proc_dec_tmpref+0x33c/0x4ac binder_deferred_func+0xc10/0x1108 process_one_work+0x520/0xba4 [...] ================================================================== Call binder_remove_device() within binder_free_proc() to ensure the device is removed from the binder_devices list before being kfreed.

In the Linux kernel, the following vulnerability has been resolved: atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). syzbot reported a warning below during atm_dev_register(). [0] Before creating a new device and procfs/sysfs for it, atm_dev_register() looks up a duplicated device by __atm_dev_lookup(). These operations are done under atm_dev_mutex. However, when removing a device in atm_dev_deregister(), it releases the mutex just after removing the device from the list that __atm_dev_lookup() iterates over. So, there will be a small race window where the device does not exist on the device list but procfs/sysfs are still not removed, triggering the splat. Let's hold the mutex until procfs/sysfs are removed in atm_dev_deregister(). [0]: proc_dir_entry 'atm/atmtcp:0' already registered WARNING: CPU: 0 PID: 5919 at fs/proc/generic.c:377 proc_register+0x455/0x5f0 fs/proc/generic.c:377 Modules linked in: CPU: 0 UID: 0 PID: 5919 Comm: syz-executor284 Not tainted 6.16.0-rc2-syzkaller-00047-g52da431bf03b #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 RIP: 0010:proc_register+0x455/0x5f0 fs/proc/generic.c:377 Code: 48 89 f9 48 c1 e9 03 80 3c 01 00 0f 85 a2 01 00 00 48 8b 44 24 10 48 c7 c7 20 c0 c2 8b 48 8b b0 d8 00 00 00 e8 0c 02 1c ff 90 <0f> 0b 90 90 48 c7 c7 80 f2 82 8e e8 0b de 23 09 48 8b 4c 24 28 48 RSP: 0018:ffffc9000466fa30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817ae248 RDX: ffff888026280000 RSI: ffffffff817ae255 RDI: 0000000000000001 RBP: ffff8880232bed48 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff888076ed2140 R13: dffffc0000000000 R14: ffff888078a61340 R15: ffffed100edda444 FS: 00007f38b3b0c6c0(0000) GS:ffff888124753000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f38b3bdf953 CR3: 0000000076d58000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_create_data+0xbe/0x110 fs/proc/generic.c:585 atm_proc_dev_register+0x112/0x1e0 net/atm/proc.c:361 atm_dev_register+0x46d/0x890 net/atm/resources.c:113 atmtcp_create+0x77/0x210 drivers/atm/atmtcp.c:369 atmtcp_attach drivers/atm/atmtcp.c:403 [inline] atmtcp_ioctl+0x2f9/0xd60 drivers/atm/atmtcp.c:464 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x115/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f38b3b74459 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f38b3b0c198 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f38b3bfe318 RCX: 00007f38b3b74459 RDX: 0000000000000000 RSI: 0000000000006180 RDI: 0000000000000005 RBP: 00007f38b3bfe310 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f38b3bcb0ac R13: 00007f38b3b0c1a0 R14: 0000200000000200 R15: 00007f38b3bcb03b </TASK>

In the Linux kernel, the following vulnerability has been resolved: iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c

In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checked. i=0: (A, A, B) -> (A, B) with count=2 ^ checked i=1: (A, B) -> (A, B) with count=2 ^ checked (B, not A!) i=2: (doesn't occur because i < count is false) This leaves the second A in the array with count=2, but the rose_neigh structure has been freed. Code that accesses these entries assumes that the first `count` entries are valid pointers, causing a use-after-free when it accesses the dangling pointer. Fix both issues by iterating over the array in reverse order with a fixed loop bound. This ensures that all entries are examined and that the removal of an entry doesn't affect subsequent iterations.

In the Linux kernel, the following vulnerability has been resolved: mcb: fix a double free bug in chameleon_parse_gdd() In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev' would be released in mcb_device_register() via put_device(). Thus, goto 'err' label and free 'mdev' again causes a double free. Just return if mcb_device_register() fails.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Fix double free that causes kernel to oops Fix a kernel oops found while testing the stm32_pcie Endpoint driver with handling of PERST# deassertion: During EP initialization, pci_epf_test_alloc_space() allocates all BARs, which are further freed if epc_set_bar() fails (for instance, due to no free inbound window). However, when pci_epc_set_bar() fails, the error path: pci_epc_set_bar() -> pci_epf_free_space() does not clear the previous assignment to epf_test->reg[bar]. Then, if the host reboots, the PERST# deassertion restarts the BAR allocation sequence with the same allocation failure (no free inbound window), creating a double free situation since epf_test->reg[bar] was deallocated and is still non-NULL. Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space() invocations are symmetric, and as such, set epf_test->reg[bar] to NULL when memory is freed. [kwilczynski: commit log]

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath12k_dp_rx_h_undecap_nwifi function for DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially resulting in invalid data access and memory corruption. Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix UAF when lookup kallsym after ftrace disabled The following issue happens with a buggy module: BUG: unable to handle page fault for address: ffffffffc05d0218 PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS RIP: 0010:sized_strscpy+0x81/0x2f0 RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000 RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68 R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038 R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ftrace_mod_get_kallsym+0x1ac/0x590 update_iter_mod+0x239/0x5b0 s_next+0x5b/0xa0 seq_read_iter+0x8c9/0x1070 seq_read+0x249/0x3b0 proc_reg_read+0x1b0/0x280 vfs_read+0x17f/0x920 ksys_read+0xf3/0x1c0 do_syscall_64+0x5f/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue may happen as follows: (1) Add kprobe tracepoint; (2) insmod test.ko; (3) Module triggers ftrace disabled; (4) rmmod test.ko; (5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed; ftrace_mod_get_kallsym() ... strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); ... The problem is when a module triggers an issue with ftrace and sets ftrace_disable. The ftrace_disable is set when an anomaly is discovered and to prevent any more damage, ftrace stops all text modification. The issue that happened was that the ftrace_disable stops more than just the text modification. When a module is loaded, its init functions can also be traced. Because kallsyms deletes the init functions after a module has loaded, ftrace saves them when the module is loaded and function tracing is enabled. This allows the output of the function trace to show the init function names instead of just their raw memory addresses. When a module is removed, ftrace_release_mod() is called, and if ftrace_disable is set, it just returns without doing anything more. The problem here is that it leaves the mod_list still around and if kallsyms is called, it will call into this code and access the module memory that has already been freed as it will return: strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); Where the "mod" no longer exists and triggers a UAF bug.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix sc7280 lpass potential buffer overflow Case values introduced in commit 5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution") cause out of bounds access in arrays of sc7280 driver data (e.g. in case of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()). Redefine LPASS_MAX_PORTS to consider the maximum possible port id for q6dsp as sc7280 driver utilizes some of those values. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Tear down vGIC on failed vCPU creation If kvm_arch_vcpu_create() fails to share the vCPU page with the hypervisor, we propagate the error back to the ioctl but leave the vGIC vCPU data initialised. Note only does this leak the corresponding memory when the vCPU is destroyed but it can also lead to use-after-free if the redistributor device handling tries to walk into the vCPU. Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the vGIC vCPU structures are destroyed on error.

In the Linux kernel, the following vulnerability has been resolved: sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue() When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the child qdisc's peek() operation before incrementing sch->q.qlen and sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may trigger an immediate dequeue and potential packet drop. In such cases, qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog have not yet been updated, leading to inconsistent queue accounting. This can leave an empty HFSC class in the active list, causing further consequences like use-after-free. This patch fixes the bug by moving the increment of sch->q.qlen and sch->qstats.backlog before the call to the child qdisc's peek() operation. This ensures that queue length and backlog are always accurate when packet drops or dequeues are triggered during the peek.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 </TASK> Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/name ---truncated---