In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix drain SQ hang with no completion SW generated completions for outstanding WRs posted on SQ after QP is in error target the wrong CQ. This causes the ib_drain_sq to hang with no completion. Fix this to generate completions on the right CQ. [ 863.969340] INFO: task kworker/u52:2:671 blocked for more than 122 seconds. [ 863.979224] Not tainted 5.14.0-130.el9.x86_64 #1 [ 863.986588] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 863.996997] task:kworker/u52:2 state:D stack: 0 pid: 671 ppid: 2 flags:0x00004000 [ 864.007272] Workqueue: xprtiod xprt_autoclose [sunrpc] [ 864.014056] Call Trace: [ 864.017575] __schedule+0x206/0x580 [ 864.022296] schedule+0x43/0xa0 [ 864.026736] schedule_timeout+0x115/0x150 [ 864.032185] __wait_for_common+0x93/0x1d0 [ 864.037717] ? usleep_range_state+0x90/0x90 [ 864.043368] __ib_drain_sq+0xf6/0x170 [ib_core] [ 864.049371] ? __rdma_block_iter_next+0x80/0x80 [ib_core] [ 864.056240] ib_drain_sq+0x66/0x70 [ib_core] [ 864.062003] rpcrdma_xprt_disconnect+0x82/0x3b0 [rpcrdma] [ 864.069365] ? xprt_prepare_transmit+0x5d/0xc0 [sunrpc] [ 864.076386] xprt_rdma_close+0xe/0x30 [rpcrdma] [ 864.082593] xprt_autoclose+0x52/0x100 [sunrpc] [ 864.088718] process_one_work+0x1e8/0x3c0 [ 864.094170] worker_thread+0x50/0x3b0 [ 864.099109] ? rescuer_thread+0x370/0x370 [ 864.104473] kthread+0x149/0x170 [ 864.109022] ? set_kthread_struct+0x40/0x40 [ 864.114713] ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000

In the Linux kernel, the following vulnerability has been resolved: erofs: fix pcluster use-after-free on UP platforms During stress testing with CONFIG_SMP disabled, KASAN reports as below: ================================================================== BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30 Read of size 8 at addr ffff8881094223f8 by task stress/7789 CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> .. __mutex_lock+0xe5/0xc30 .. z_erofs_do_read_page+0x8ce/0x1560 .. z_erofs_readahead+0x31c/0x580 .. Freed by task 7787 kasan_save_stack+0x1e/0x40 kasan_set_track+0x20/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0x10c/0x190 kmem_cache_free+0xed/0x380 rcu_core+0x3d5/0xc90 __do_softirq+0x12d/0x389 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x97/0xb0 call_rcu+0x3d/0x3f0 erofs_shrink_workstation+0x11f/0x210 erofs_shrink_scan+0xdc/0x170 shrink_slab.constprop.0+0x296/0x530 drop_slab+0x1c/0x70 drop_caches_sysctl_handler+0x70/0x80 proc_sys_call_handler+0x20a/0x2f0 vfs_write+0x555/0x6c0 ksys_write+0xbe/0x160 do_syscall_64+0x3b/0x90 The root cause is that erofs_workgroup_unfreeze() doesn't reset to orig_val thus it causes a race that the pcluster reuses unexpectedly before freeing. Since UP platforms are quite rare now, such path becomes unnecessary. Let's drop such specific-designed path directly instead.

Race condition in the ip4_datagram_release_cb function in net/ipv4/datagram.c in the Linux kernel before 3.15.2 allows local users to gain privileges or cause a denial of service (use-after-free) by leveraging incorrect expectations about locking during multithreaded access to internal data structures for IPv4 UDP sockets.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared.

IBM DB2 for Linux, UNIX and Windows (includes DB2 Connect Server) 9.7, 10.1, 10.5, and 11.1 is vulnerable to a buffer overflow, which could allow an authenticated local attacker to execute arbitrary code on the system as root. IBM X-ForceID: 155894.

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix potential use-after-free during probe Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function.

In the Linux kernel, the following vulnerability has been resolved: nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net In the normal case, when we excute `echo 0 > /proc/fs/nfsd/threads`, the function `nfs4_state_destroy_net` in `nfs4_state_shutdown_net` will release all resources related to the hashed `nfs4_client`. If the `nfsd_client_shrinker` is running concurrently, the `expire_client` function will first unhash this client and then destroy it. This can lead to the following warning. Additionally, numerous use-after-free errors may occur as well. nfsd_client_shrinker echo 0 > /proc/fs/nfsd/threads expire_client nfsd_shutdown_net unhash_client ... nfs4_state_shutdown_net /* won't wait shrinker exit */ /* cancel_work(&nn->nfsd_shrinker_work) * nfsd_file for this /* won't destroy unhashed client1 */ * client1 still alive nfs4_state_destroy_net */ nfsd_file_cache_shutdown /* trigger warning */ kmem_cache_destroy(nfsd_file_slab) kmem_cache_destroy(nfsd_file_mark_slab) /* release nfsd_file and mark */ __destroy_client ==================================================================== BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on __kmem_cache_shutdown() -------------------------------------------------------------------- CPU: 4 UID: 0 PID: 764 Comm: sh Not tainted 6.12.0-rc3+ #1 dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xac/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e ==================================================================== BUG nfsd_file_mark (Tainted: G B W ): Objects remaining nfsd_file_mark on __kmem_cache_shutdown() -------------------------------------------------------------------- dump_stack_lvl+0x53/0x70 slab_err+0xb0/0xf0 __kmem_cache_shutdown+0x15c/0x310 kmem_cache_destroy+0x66/0x160 nfsd_file_cache_shutdown+0xc8/0x210 [nfsd] nfsd_destroy_serv+0x251/0x2a0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e To resolve this issue, cancel `nfsd_shrinker_work` using synchronous mode in nfs4_state_shutdown_net.

In the Linux kernel, the following vulnerability has been resolved: tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler(). """ We are seeing a use-after-free from a bpf prog attached to trace_tcp_retransmit_synack. The program passes the req->sk to the bpf_sk_storage_get_tracing kernel helper which does check for null before using it. """ The commit 83fccfc3940c ("inet: fix potential deadlock in reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not to call del_timer_sync() from reqsk_timer_handler(), but it introduced a small race window. Before the timer is called, expire_timers() calls detach_timer(timer, true) to clear timer->entry.pprev and marks it as not pending. If reqsk_queue_unlink() checks timer_pending() just after expire_timers() calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will continue running and send multiple SYN+ACKs until it expires. The reported UAF could happen if req->sk is close()d earlier than the timer expiration, which is 63s by default. The scenario would be 1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(), but del_timer_sync() is missed 2. reqsk timer is executed and scheduled again 3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but reqsk timer still has another one, and inet_csk_accept() does not clear req->sk for non-TFO sockets 4. sk is close()d 5. reqsk timer is executed again, and BPF touches req->sk Let's not use timer_pending() by passing the caller context to __inet_csk_reqsk_queue_drop(). Note that reqsk timer is pinned, so the issue does not happen in most use cases. [1] [0] BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0 Use-after-free read at 0x00000000a891fb3a (in kfence-#1): bpf_sk_storage_get_tracing+0x2e/0x1b0 bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda bpf_trace_run2+0x4c/0xc0 tcp_rtx_synack+0xf9/0x100 reqsk_timer_handler+0xda/0x3d0 run_timer_softirq+0x292/0x8a0 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 intel_idle_irq+0x5a/0xa0 cpuidle_enter_state+0x94/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6 allocated by task 0 on cpu 9 at 260507.901592s: sk_prot_alloc+0x35/0x140 sk_clone_lock+0x1f/0x3f0 inet_csk_clone_lock+0x15/0x160 tcp_create_openreq_child+0x1f/0x410 tcp_v6_syn_recv_sock+0x1da/0x700 tcp_check_req+0x1fb/0x510 tcp_v6_rcv+0x98b/0x1420 ipv6_list_rcv+0x2258/0x26e0 napi_complete_done+0x5b1/0x2990 mlx5e_napi_poll+0x2ae/0x8d0 net_rx_action+0x13e/0x590 irq_exit_rcu+0xf5/0x320 common_interrupt+0x80/0x90 asm_common_interrupt+0x22/0x40 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb freed by task 0 on cpu 9 at 260507.927527s: rcu_core_si+0x4ff/0xf10 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: Initialization of the dangling pointer occurring in vsk->trans During loopback communication, a dangling pointer can be created in vsk->trans, potentially leading to a Use-After-Free condition. This issue is resolved by initializing vsk->trans to NULL.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow Syzkaller reported this splat: ================================================================== BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662 CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline] mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572 mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603 genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg net/socket.c:744 [inline] ____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2661 __sys_sendmsg+0x117/0x1f0 net/socket.c:2690 do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline] __do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386 do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411 entry_SYSENTER_compat_after_hwframe+0x84/0x8e RIP: 0023:0xf7fe4579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172 RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 5387: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803 subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956 __tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline] tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167 mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764 __mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592 mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642 mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline] mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943 mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777 process_one_work+0x958/0x1b30 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/ke ---truncated---

kernel/trace/trace_syscalls.c in the Linux kernel through 3.17.2 does not properly handle private syscall numbers during use of the ftrace subsystem, which allows local users to gain privileges or cause a denial of service (invalid pointer dereference) via a crafted application.

In the Linux kernel, the following vulnerability has been resolved: tracing: Consider the NULL character when validating the event length strlen() returns a string length excluding the null byte. If the string length equals to the maximum buffer length, the buffer will have no space for the NULL terminating character. This commit checks this condition and returns failure for it.

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix address emission with tag-based KASAN enabled When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image struct on the stack is passed during the size calculation pass and an address on the heap is passed during code generation. This may cause a heap buffer overflow if the heap address is tagged because emit_a64_mov_i64() will emit longer code than it did during the size calculation pass. The same problem could occur without tag-based KASAN if one of the 16-bit words of the stack address happened to be all-ones during the size calculation pass. Fix the problem by assuming the worst case (4 instructions) when calculating the size of the bpf_tramp_image address emission.

In the Linux kernel, the following vulnerability has been resolved: usb: phy: isp1301: fix non-OF device reference imbalance A recent change fixing a device reference leak in a UDC driver introduced a potential use-after-free in the non-OF case as the isp1301_get_client() helper only increases the reference count for the returned I2C device in the OF case. Increment the reference count also for non-OF so that the caller can decrement it unconditionally. Note that this is inherently racy just as using the returned I2C device is since nothing is preventing the PHY driver from being unbound while in use.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix gmap_helper_zap_one_page() again A few checks were missing in gmap_helper_zap_one_page(), which can lead to memory corruption in the guest under specific circumstances. Add the missing checks.

In the Linux kernel, the following vulnerability has been resolved: gve: defer interrupt enabling until NAPI registration Currently, interrupts are automatically enabled immediately upon request. This allows interrupt to fire before the associated NAPI context is fully initialized and cause failures like below: [ 0.946369] Call Trace: [ 0.946369] <IRQ> [ 0.946369] __napi_poll+0x2a/0x1e0 [ 0.946369] net_rx_action+0x2f9/0x3f0 [ 0.946369] handle_softirqs+0xd6/0x2c0 [ 0.946369] ? handle_edge_irq+0xc1/0x1b0 [ 0.946369] __irq_exit_rcu+0xc3/0xe0 [ 0.946369] common_interrupt+0x81/0xa0 [ 0.946369] </IRQ> [ 0.946369] <TASK> [ 0.946369] asm_common_interrupt+0x22/0x40 [ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10 Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto enablement and explicitly enable the interrupt in NAPI initialization path (and disable it during NAPI teardown). This ensures that interrupt lifecycle is strictly coupled with readiness of NAPI context.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node() Previously, btrfs_get_or_create_delayed_node() set the delayed_node's refcount before acquiring the root->delayed_nodes lock. Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes") moved refcount_set inside the critical section, which means there is no longer a memory barrier between setting the refcount and setting btrfs_inode->delayed_node. Without that barrier, the stores to node->refs and btrfs_inode->delayed_node may become visible out of order. Another thread can then read btrfs_inode->delayed_node and attempt to increment a refcount that hasn't been set yet, leading to a refcounting bug and a use-after-free warning. The fix is to move refcount_set back to where it was to take advantage of the implicit memory barrier provided by lock acquisition. Because the allocations now happen outside of the lock's critical section, they can use GFP_NOFS instead of GFP_ATOMIC.

In the Linux kernel, the following vulnerability has been resolved: btrfs: replace BTRFS_MAX_EXTENT_SIZE with fs_info->max_extent_size On zoned filesystem, data write out is limited by max_zone_append_size, and a large ordered extent is split according the size of a bio. OTOH, the number of extents to be written is calculated using BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the metadata bytes to update and/or create the metadata items. The metadata reservation is done at e.g, btrfs_buffered_write() and then released according to the estimation changes. Thus, if the number of extent increases massively, the reserved metadata can run out. The increase of the number of extents easily occurs on zoned filesystem if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the following warning on a small RAM environment with disabling metadata over-commit (in the following patch). [75721.498492] ------------[ cut here ]------------ [75721.505624] BTRFS: block rsv 1 returned -28 [75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs] [75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G W 5.18.0-rc2-BTRFS-ZNS+ #109 [75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021 [75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] [75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs] [75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286 [75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000 [75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e [75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7 [75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28 [75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a [75721.701878] FS: 0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000 [75721.712601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0 [75721.730499] Call Trace: [75721.735166] <TASK> [75721.739886] btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs] [75721.747545] ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs] [75721.756145] ? btrfs_get_32+0xea/0x2d0 [btrfs] [75721.762852] ? btrfs_get_32+0xea/0x2d0 [btrfs] [75721.769520] ? push_leaf_left+0x420/0x620 [btrfs] [75721.776431] ? memcpy+0x4e/0x60 [75721.781931] split_leaf+0x433/0x12d0 [btrfs] [75721.788392] ? btrfs_get_token_32+0x580/0x580 [btrfs] [75721.795636] ? push_for_double_split.isra.0+0x420/0x420 [btrfs] [75721.803759] ? leaf_space_used+0x15d/0x1a0 [btrfs] [75721.811156] btrfs_search_slot+0x1bc3/0x2790 [btrfs] [75721.818300] ? lock_downgrade+0x7c0/0x7c0 [75721.824411] ? free_extent_buffer.part.0+0x107/0x200 [btrfs] [75721.832456] ? split_leaf+0x12d0/0x12d0 [btrfs] [75721.839149] ? free_extent_buffer.part.0+0x14f/0x200 [btrfs] [75721.846945] ? free_extent_buffer+0x13/0x20 [btrfs] [75721.853960] ? btrfs_release_path+0x4b/0x190 [btrfs] [75721.861429] btrfs_csum_file_blocks+0x85c/0x1500 [btrfs] [75721.869313] ? rcu_read_lock_sched_held+0x16/0x80 [75721.876085] ? lock_release+0x552/0xf80 [75721.881957] ? btrfs_del_csums+0x8c0/0x8c0 [btrfs] [75721.888886] ? __kasan_check_write+0x14/0x20 [75721.895152] ? do_raw_read_unlock+0x44/0x80 [75721.901323] ? _raw_write_lock_irq+0x60/0x80 [75721.907983] ? btrfs_global_root+0xb9/0xe0 [btrfs] [75721.915166] ? btrfs_csum_root+0x12b/0x180 [btrfs] [75721.921918] ? btrfs_get_global_root+0x820/0x820 [btrfs] [75721.929166] ? _raw_write_unlock+0x23/0x40 [75721.935116] ? unpin_extent_cache+0x1e3/0x390 [btrfs] [75721.942041] btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs] [75721.949906] ? try_to_wake_up+0x30/0x14a0 [75721.955700] ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs] [75721.962661] ? rcu ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't free job in TDR Freeing job in TDR is not safe as TDR can pass the run_job thread resulting in UAF. It is only safe for free job to naturally be called by the scheduler. Rather free job in TDR, add to pending list. (cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d)

kernel/trace/trace_syscalls.c in the Linux kernel through 3.17.2 does not properly handle private syscall numbers during use of the perf subsystem, which allows local users to cause a denial of service (out-of-bounds read and OOPS) or bypass the ASLR protection mechanism via a crafted application.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex If amdgpu_cs_vm_handling returns r != 0, then it will unlock the bo_list_mutex inside the function amdgpu_cs_vm_handling and again on amdgpu_cs_parser_fini. This problem results in the following use-after-free problem: [ 220.280990] ------------[ cut here ]------------ [ 220.281000] refcount_t: underflow; use-after-free. [ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 220.281029] ------------[ cut here ]------------ [ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 [ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022 [ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de 7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a 6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48 c7 [ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282 [ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000 [ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff [ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930 [ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400 [ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003 [ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000 [ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0 [ 220.281480] Call Trace: [ 220.281485] <TASK> [ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu] [ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282028] drm_ioctl_kernel+0xa4/0x150 [ 220.282043] drm_ioctl+0x21f/0x420 [ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu] [ 220.282275] ? lock_release+0x14f/0x460 [ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu] [ 220.282534] __x64_sys_ioctl+0x90/0xd0 [ 220.282545] do_syscall_64+0x5b/0x80 [ 220.282551] ? futex_wake+0x6c/0x150 [ 220.282568] ? lock_is_held_type+0xe8/0x140 [ 220.282580] ? do_syscall_64+0x67/0x80 [ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282592] ? do_syscall_64+0x67/0x80 [ 220.282597] ? do_syscall_64+0x67/0x80 [ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100 [ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 220.282616] RIP: 0033:0x7f8282a4f8bf [ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 [ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf [ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018 [ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0 [ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444 [ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003 [ 220.282689] </TASK> [ 220.282693] irq event stamp: 6232311 [ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70 [ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70 [ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170 [ 220.282716] softirqs last disabled at (6232061): [<ffffffff97 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269 CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/dump_stack.c:118 print_address_description+0x78/0x5c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x148/0x1e4 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:183 [inline] __asan_load8+0xb4/0xbc mm/kasan/generic.c:252 kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Allocated by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475 kmem_cache_alloc_trace include/linux/slab.h:450 [inline] kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] kvm_vm_ioctl_register_coalesced_mmio+0x78/0x1cc arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:146 kvm_vm_ioctl+0x7e8/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3746 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Freed by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x38/0x6c mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0x104/0x38c mm/slub.c:4124 coalesced_mmio_destructor+0x94/0xa4 arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:102 kvm_iodevice_destructor include/kvm/iodev.h:61 [inline] kvm_io_bus_unregister_dev+0x248/0x280 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:4374 kvm_vm_ioctl_unregister_coalesced_mmio+0x158/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:186 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/sys ---truncated---

An issue was discovered in the Linux kernel before 5.0.19. The XFRM subsystem has a use-after-free, related to an xfrm_state_fini panic, aka CID-dbb2483b2a46.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency Under high concurrency, A tree-connection object (tcon) is freed on a disconnect path while another path still holds a reference and later executes *_put()/write on it.

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to nested_vmx_vmexit() to make sure MSR permission bitmap is not switched when an immediate exit from L2 to L1 happens right after migration (caused by a pending event, for example). Unfortunately, in the exact same situation we still need to have eVMCS mapped so nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS. As a band-aid, restore nested_get_evmcs_page() when clearing KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far from being ideal as we can't easily propagate possible failures and even if we could, this is most likely already too late to do so. The whole 'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration seems to be fragile as we diverge too much from the 'native' path when vmptr loading happens on vmx_set_nested_state().

In the Linux kernel, the following vulnerability has been resolved: drm/i915/selftests: fix subtraction overflow bug On some machines hole_end can be small enough to cause subtraction overflow. On the other side (addr + 2 * min_alignment) can overflow in case of mock tests. This patch should handle both cases. (cherry picked from commit ab3edc679c552a466e4bf0b11af3666008bd65a2)

The kvm_iommu_map_pages function in virt/kvm/iommu.c in the Linux kernel through 3.17.2 miscalculates the number of pages during the handling of a mapping failure, which allows guest OS users to cause a denial of service (host OS page unpinning) or possibly have unspecified other impact by leveraging guest OS privileges. NOTE: this vulnerability exists because of an incorrect fix for CVE-2014-3601.

In the Linux kernel, the following vulnerability has been resolved: net/xen-netback: prevent UAF in xenvif_flush_hash() During the list_for_each_entry_rcu iteration call of xenvif_flush_hash, kfree_rcu does not exist inside the rcu read critical section, so if kfree_rcu is called when the rcu grace period ends during the iteration, UAF occurs when accessing head->next after the entry becomes free. Therefore, to solve this, you need to change it to list_for_each_entry_safe.

In the Linux kernel, the following vulnerability has been resolved: usbnet: Fix linkwatch use-after-free on disconnect usbnet uses the work usbnet_deferred_kevent() to perform tasks which may sleep. On disconnect, completion of the work was originally awaited in ->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock": https://git.kernel.org/tglx/history/c/0f138bbfd83c The change was made because back then, the kernel's workqueue implementation did not allow waiting for a single work. One had to wait for completion of *all* work by calling flush_scheduled_work(), and that could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex held in ->ndo_stop(). The commit solved one problem but created another: It causes a use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c, ax88179_178a.c, ch9200.c and smsc75xx.c: * If the drivers receive a link change interrupt immediately before disconnect, they raise EVENT_LINK_RESET in their (non-sleepable) ->status() callback and schedule usbnet_deferred_kevent(). * usbnet_deferred_kevent() invokes the driver's ->link_reset() callback, which calls netif_carrier_{on,off}(). * That in turn schedules the work linkwatch_event(). Because usbnet_deferred_kevent() is awaited after unregister_netdev(), netif_carrier_{on,off}() may operate on an unregistered netdev and linkwatch_event() may run after free_netdev(), causing a use-after-free. In 2010, usbnet was changed to only wait for a single instance of usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf ("drivers/net: don't use flush_scheduled_work()"). Unfortunately the commit neglected to move the wait back to ->ndo_stop(). Rectify that omission at long last.

In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix possible double free of kmem_cache When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt'

A buffer overflow vulnerability in the Rubrik Backup Service (RBS) Agent for Linux or Unix-based systems in Rubrik CDM 7.0.1, 7.0.1-p1, 7.0.1-p2 or 7.0.1-p3 before CDM 7.0.2-p2 could allow a local attacker to obtain root privileges by sending a crafted message to the RBS agent.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix slab-use-after-free in scmi_bus_notifier() The scmi_dev->name is released prematurely in __scmi_device_destroy(), which causes slab-use-after-free when accessing scmi_dev->name in scmi_bus_notifier(). So move the release of scmi_dev->name to scmi_device_release() to avoid slab-use-after-free. | BUG: KASAN: slab-use-after-free in strncmp+0xe4/0xec | Read of size 1 at addr ffffff80a482bcc0 by task swapper/0/1 | | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.6.38-debug #1 | Hardware name: Qualcomm Technologies, Inc. SA8775P Ride (DT) | Call trace: | dump_backtrace+0x94/0x114 | show_stack+0x18/0x24 | dump_stack_lvl+0x48/0x60 | print_report+0xf4/0x5b0 | kasan_report+0xa4/0xec | __asan_report_load1_noabort+0x20/0x2c | strncmp+0xe4/0xec | scmi_bus_notifier+0x5c/0x54c | notifier_call_chain+0xb4/0x31c | blocking_notifier_call_chain+0x68/0x9c | bus_notify+0x54/0x78 | device_del+0x1bc/0x840 | device_unregister+0x20/0xb4 | __scmi_device_destroy+0xac/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Allocated by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_alloc_info+0x24/0x34 | __kasan_kmalloc+0xa0/0xb8 | __kmalloc_node_track_caller+0x6c/0x104 | kstrdup+0x48/0x84 | kstrdup_const+0x34/0x40 | __scmi_device_create.part.0+0x8c/0x408 | scmi_device_create+0x104/0x370 | scmi_chan_setup+0x2a0/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20 | | Freed by task 1: | kasan_save_stack+0x2c/0x54 | kasan_set_track+0x2c/0x40 | kasan_save_free_info+0x38/0x5c | __kasan_slab_free+0xe8/0x164 | __kmem_cache_free+0x11c/0x230 | kfree+0x70/0x130 | kfree_const+0x20/0x40 | __scmi_device_destroy+0x70/0x280 | scmi_device_destroy+0x94/0xd0 | scmi_chan_setup+0x524/0x750 | scmi_probe+0x7fc/0x1508 | platform_probe+0xc4/0x19c | really_probe+0x32c/0x99c | __driver_probe_device+0x15c/0x3c4 | driver_probe_device+0x5c/0x170 | __driver_attach+0x1c8/0x440 | bus_for_each_dev+0xf4/0x178 | driver_attach+0x3c/0x58 | bus_add_driver+0x234/0x4d4 | driver_register+0xf4/0x3c0 | __platform_driver_register+0x60/0x88 | scmi_driver_init+0xb0/0x104 | do_one_initcall+0xb4/0x664 | kernel_init_freeable+0x3c8/0x894 | kernel_init+0x24/0x1e8 | ret_from_fork+0x10/0x20

The sock_setsockopt function in net/core/sock.c in the Linux kernel before 4.8.14 mishandles negative values of sk_sndbuf and sk_rcvbuf, which allows local users to cause a denial of service (memory corruption and system crash) or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability for a crafted setsockopt system call with the (1) SO_SNDBUFFORCE or (2) SO_RCVBUFFORCE option.

An issue was discovered in the Linux kernel before 6.0.11. Missing validation of IEEE80211_P2P_ATTR_OPER_CHANNEL in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger an out-of-bounds write when parsing the channel list attribute from Wi-Fi management frames.

In the Linux kernel, the following vulnerability has been resolved: ext4: aovid use-after-free in ext4_ext_insert_extent() As Ojaswin mentioned in Link, in ext4_ext_insert_extent(), if the path is reallocated in ext4_ext_create_new_leaf(), we'll use the stale path and cause UAF. Below is a sample trace with dummy values: ext4_ext_insert_extent path = *ppath = 2000 ext4_ext_create_new_leaf(ppath) ext4_find_extent(ppath) path = *ppath = 2000 if (depth > path[0].p_maxdepth) kfree(path = 2000); *ppath = path = NULL; path = kcalloc() = 3000 *ppath = 3000; return path; /* here path is still 2000, UAF! */ eh = path[depth].p_hdr ================================================================== BUG: KASAN: slab-use-after-free in ext4_ext_insert_extent+0x26d4/0x3330 Read of size 8 at addr ffff8881027bf7d0 by task kworker/u36:1/179 CPU: 3 UID: 0 PID: 179 Comm: kworker/u6:1 Not tainted 6.11.0-rc2-dirty #866 Call Trace: <TASK> ext4_ext_insert_extent+0x26d4/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 [...] Allocated by task 179: ext4_find_extent+0x81c/0x1f70 ext4_ext_map_blocks+0x146/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] Freed by task 179: kfree+0xcb/0x240 ext4_find_extent+0x7c0/0x1f70 ext4_ext_insert_extent+0xa26/0x3330 ext4_ext_map_blocks+0xe22/0x2d40 ext4_map_blocks+0x71e/0x1700 ext4_do_writepages+0x1290/0x2800 ext4_writepages+0x26d/0x4e0 do_writepages+0x175/0x700 [...] ================================================================== So use *ppath to update the path to avoid the above problem.

The Linux kernel before 5.17.2 mishandles seccomp permissions. The PTRACE_SEIZE code path allows attackers to bypass intended restrictions on setting the PT_SUSPEND_SECCOMP flag.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9381/1: kasan: clear stale stack poison We found below OOB crash: [ 33.452494] ================================================================== [ 33.453513] BUG: KASAN: stack-out-of-bounds in refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.454660] Write of size 164 at addr c1d03d30 by task swapper/0/0 [ 33.455515] [ 33.455767] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 6.1.25-mainline #1 [ 33.456880] Hardware name: Generic DT based system [ 33.457555] unwind_backtrace from show_stack+0x18/0x1c [ 33.458326] show_stack from dump_stack_lvl+0x40/0x4c [ 33.459072] dump_stack_lvl from print_report+0x158/0x4a4 [ 33.459863] print_report from kasan_report+0x9c/0x148 [ 33.460616] kasan_report from kasan_check_range+0x94/0x1a0 [ 33.461424] kasan_check_range from memset+0x20/0x3c [ 33.462157] memset from refresh_cpu_vm_stats.constprop.0+0xcc/0x2ec [ 33.463064] refresh_cpu_vm_stats.constprop.0 from tick_nohz_idle_stop_tick+0x180/0x53c [ 33.464181] tick_nohz_idle_stop_tick from do_idle+0x264/0x354 [ 33.465029] do_idle from cpu_startup_entry+0x20/0x24 [ 33.465769] cpu_startup_entry from rest_init+0xf0/0xf4 [ 33.466528] rest_init from arch_post_acpi_subsys_init+0x0/0x18 [ 33.467397] [ 33.467644] The buggy address belongs to stack of task swapper/0/0 [ 33.468493] and is located at offset 112 in frame: [ 33.469172] refresh_cpu_vm_stats.constprop.0+0x0/0x2ec [ 33.469917] [ 33.470165] This frame has 2 objects: [ 33.470696] [32, 76) 'global_zone_diff' [ 33.470729] [112, 276) 'global_node_diff' [ 33.471294] [ 33.472095] The buggy address belongs to the physical page: [ 33.472862] page:3cd72da8 refcount:1 mapcount:0 mapping:00000000 index:0x0 pfn:0x41d03 [ 33.473944] flags: 0x1000(reserved|zone=0) [ 33.474565] raw: 00001000 ed741470 ed741470 00000000 00000000 00000000 ffffffff 00000001 [ 33.475656] raw: 00000000 [ 33.476050] page dumped because: kasan: bad access detected [ 33.476816] [ 33.477061] Memory state around the buggy address: [ 33.477732] c1d03c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.478630] c1d03c80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 00 [ 33.479526] >c1d03d00: 00 04 f2 f2 f2 f2 00 00 00 00 00 00 f1 f1 f1 f1 [ 33.480415] ^ [ 33.481195] c1d03d80: 00 00 00 00 00 00 00 00 00 00 04 f3 f3 f3 f3 f3 [ 33.482088] c1d03e00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 33.482978] ================================================================== We find the root cause of this OOB is that arm does not clear stale stack poison in the case of cpuidle. This patch refer to arch/arm64/kernel/sleep.S to resolve this issue. From cited commit [1] that explain the problem Functions which the compiler has instrumented for KASAN place poison on the stack shadow upon entry and remove this poison prior to returning. In the case of cpuidle, CPUs exit the kernel a number of levels deep in C code. Any instrumented functions on this critical path will leave portions of the stack shadow poisoned. If CPUs lose context and return to the kernel via a cold path, we restore a prior context saved in __cpu_suspend_enter are forgotten, and we never remove the poison they placed in the stack shadow area by functions calls between this and the actual exit of the kernel. Thus, (depending on stackframe layout) subsequent calls to instrumented functions may hit this stale poison, resulting in (spurious) KASAN splats to the console. To avoid this, clear any stale poison from the idle thread for a CPU prior to bringing a CPU online. From cited commit [2] Extend to check for CONFIG_KASAN_STACK [1] commit 0d97e6d8024c ("arm64: kasan: clear stale stack poison") [2] commit d56a9ef84bd0 ("kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK")

In the Linux kernel before 5.4.2, the io_uring feature leads to requests that inadvertently have UID 0 and full capabilities, aka CID-181e448d8709. This is related to fs/io-wq.c, fs/io_uring.c, and net/socket.c. For example, an attacker can bypass intended restrictions on adding an IPv4 address to the loopback interface. This occurs because IORING_OP_SENDMSG operations, although requested in the context of an unprivileged user, are sometimes performed by a kernel worker thread without considering that context.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in a buffer overflow (although it's unrealistic). This patch replaces it with a safer version, scnprintf() for papering over such a potential issue.

In the Linux kernel before 5.3.11, sound/core/timer.c has a use-after-free caused by erroneous code refactoring, aka CID-e7af6307a8a5. This is related to snd_timer_open and snd_timer_close_locked. The timeri variable was originally intended to be for a newly created timer instance, but was used for a different purpose after refactoring.

vcs_write in drivers/tty/vt/vc_screen.c in the Linux kernel through 5.3.13 does not prevent write access to vcsu devices, aka CID-0c9acb1af77a.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix array out-of-bound access in SoC stats Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process() function access ath12k_soc_dp_stats::hal_reo_error using the REO destination SRNG ring ID, which is incorrect. SRNG ring ID differ from normal ring ID, and this usage leads to out-of-bounds array access. To fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID directly instead of the SRNG ring ID to avoid out-of-bounds array access. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: perf: Avoid undefined behavior from stopping/starting inactive events Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can leave event->hw.idx at -1. When PMU drivers later attempt to use this negative index as a shift exponent in bitwise operations, it leads to UBSAN shift-out-of-bounds reports. The issue is a logical flaw in how event groups handle throttling when some members are intentionally disabled. Based on the analysis and the reproducer provided by Mark Rutland (this issue on both arm64 and x86-64). The scenario unfolds as follows: 1. A group leader event is configured with a very aggressive sampling period (e.g., sample_period = 1). This causes frequent interrupts and triggers the throttling mechanism. 2. A child event in the same group is created in a disabled state (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF. Since it hasn't been scheduled onto the PMU, its event->hw.idx remains initialized at -1. 3. When throttling occurs, perf_event_throttle_group() and later perf_event_unthrottle_group() iterate through all siblings, including the disabled child event. 4. perf_event_throttle()/unthrottle() are called on this inactive child event, which then call event->pmu->start()/stop(). 5. The PMU driver receives the event with hw.idx == -1 and attempts to use it as a shift exponent. e.g., in macros like PMCNTENSET(idx), leading to the UBSAN report. The throttling mechanism attempts to start/stop events that are not actively scheduled on the hardware. Move the state check into perf_event_throttle()/perf_event_unthrottle() so that inactive events are skipped entirely. This ensures only active events with a valid hw.idx are processed, preventing undefined behavior and silencing UBSAN warnings. The corrected check ensures true before proceeding with PMU operations. The problem can be reproduced with the syzkaller reproducer:

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid use-after-free in ext4_ext_show_leaf() In ext4_find_extent(), path may be freed by error or be reallocated, so using a previously saved *ppath may have been freed and thus may trigger use-after-free, as follows: ext4_split_extent path = *ppath; ext4_split_extent_at(ppath) path = ext4_find_extent(ppath) ext4_split_extent_at(ppath) // ext4_find_extent fails to free path // but zeroout succeeds ext4_ext_show_leaf(inode, path) eh = path[depth].p_hdr // path use-after-free !!! Similar to ext4_split_extent_at(), we use *ppath directly as an input to ext4_ext_show_leaf(). Fix a spelling error by the way. Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly. This issue is triggered only when EXT_DEBUG is defined and therefore does not affect functionality.

drivers/infiniband/ulp/rtrs/rtrs-clt.c in the Linux kernel before 5.16.12 has a double free related to rtrs_clt_dev_release.

Improper Update of Reference Count vulnerability in net/sched of Linux Kernel allows local attacker to cause privilege escalation to root. This issue affects: Linux Kernel versions prior to 5.18; version 4.14 and later versions.

A flaw use after free in the Linux kernel NILFS file system was found in the way user triggers function security_inode_alloc to fail with following call to function nilfs_mdt_destroy. A local user could use this flaw to crash the system or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: don't move oom_bfqq Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] ra ---truncated---

An issue was discovered in the Linux kernel through 5.17.5. io_rw_init_file in fs/io_uring.c lacks initialization of kiocb->private.