HashiCorp Vault Enterprise 1.6.0 & 1.6.1 allowed the `remove-peer` raft operator command to be executed against DR secondaries without authentication. Fixed in 1.6.2.

HashiCorp Consul and Consul Enterprise did not appropriately enforce scope for local tokens issued by a primary data center, where replication to a secondary data center was not enabled. Introduced in 1.4.0, fixed in 1.6.6 and 1.7.4.

HashiCorp Consul and Consul Enterprise 1.3.0 through 1.10.0 Envoy proxy TLS configuration does not validate destination service identity in the encoded subject alternative name. Fixed in 1.8.14, 1.9.8, and 1.10.1.

HashiCorp Nomad and Nomad Enterprise 1.5.13 up to 1.6.6, and 1.7.3 template renderer is vulnerable to arbitrary file write on the host as the Nomad client user through symlink attacks. This vulnerability, CVE-2024-1329, is fixed in Nomad 1.7.4, 1.6.7, and 1.5.14.

HashiCorp Vault and Vault Enterprise 1.5.1 and newer, under certain circumstances, may exclude revoked but unexpired certificates from the CRL. Fixed in 1.5.8, 1.6.4, and 1.7.1.

The Vault and Vault Enterprise ("Vault") Google Cloud secrets engine did not preserve existing Google Cloud IAM Conditions upon creating or updating rolesets. Fixed in Vault 1.13.0.

HashiCorp Sentinel up to 0.10.1 incorrectly parsed negation in certain policy expressions. Fixed in 0.10.2.

HashiCorp vault-ssh-helper up to and including version 0.1.6 incorrectly accepted Vault-issued SSH OTPs for the subnet in which a host's network interface was located, rather than the specific IP address assigned to that interface. Fixed in 0.2.0.

HashiCorp Consul and Consul Enterprise up to 1.9.16, 1.10.9, and 1.11.4 may allow server side request forgery when the Consul client agent follows redirects returned by HTTP health check endpoints. Fixed in 1.9.17, 1.10.10, and 1.11.5.

HashiCorp Vault and Vault Enterprise Cassandra integrations (storage backend and database secrets engine plugin) did not validate TLS certificates when connecting to Cassandra clusters. Fixed in 1.6.4 and 1.7.1

HashiCorp Consul Enterprise version 1.8.0 up to 1.9.4 audit log can be bypassed by specifically crafted HTTP events. Fixed in 1.9.5, and 1.8.10.

HashiCorp Consul and Consul Enterprise 1.9.0 through 1.10.0 default deny policy with a single L7 application-aware intention deny action cancels out, causing the intention to incorrectly fail open, allowing L4 traffic. Fixed in 1.9.8 and 1.10.1.

HashiCorp Terraform Enterprise up to v202102-2 failed to enforce an organization-level setting that required users within an organization to have two-factor authentication enabled. Fixed in v202103-1.

HashiCorp Vault and Vault Enterprise versions 0.8.3 and newer, when configured with the GCP GCE auth method, may be vulnerable to authentication bypass. Fixed in 1.2.5, 1.3.8, 1.4.4, and 1.5.1.

An issue was discovered in Western Bridge Cobub Razor 0.7.2. Authentication is not required for /index.php?/install/installation/createuserinfo requests, resulting in account creation.

The Very Simple Contact Form WordPress plugin before 11.6 exposes the solution to the captcha in the rendered contact form, both as hidden input fields and as plain text in the page, making it very easy for bots to bypass the captcha check, rendering the page a likely target for spam bots.

Nextcloud server is a self hosted personal cloud system. Under some circumstance it was possible to bypass the second factor of 2FA after successfully providing the user credentials. It is recommended that the Nextcloud Server is upgraded to 26.0.13, 27.1.8 or 28.0.4 and Nextcloud Enterprise Server is upgraded to 21.0.9.17, 22.2.10.22, 23.0.12.17, 24.0.12.13, 25.0.13.8, 26.0.13, 27.1.8 or 28.0.4.

In JetBrains Ktor before 1.6.4, nonce verification during the OAuth2 authentication process is implemented improperly.

Affected versions of Atlassian Jira Server and Data Center allow attackers with access to an administrator account that has had its access revoked to modify projects' Users & Roles settings, via a Broken Authentication vulnerability in the /plugins/servlet/project-config/PROJECT/roles endpoint. The affected versions are before version 8.19.1.

A misconfiguration of RSA in PingID Mac Login prior to 1.1 is vulnerable to pre-computed dictionary attacks, leading to an offline MFA bypass.

A vulnerability has been identified in SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (V4.5.0). Affected devices fail to authenticate against configured passwords when provisioned using TIA Portal V13. This could allow an attacker using TIA Portal V13 or later versions to bypass authentication and download arbitrary programs to the PLC. The vulnerability does not occur when TIA Portal V13 SP1 or any later version was used to provision the device.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, FreeSWITCH does not authenticate SIP MESSAGE requests, leading to spam and message spoofing. By default, SIP requests of the type MESSAGE (RFC 3428) are not authenticated in the affected versions of FreeSWITCH. MESSAGE requests are relayed to SIP user agents registered with the FreeSWITCH server without requiring any authentication. Although this behaviour can be changed by setting the `auth-messages` parameter to `true`, it is not the default setting. Abuse of this security issue allows attackers to send SIP MESSAGE messages to any SIP user agent that is registered with the server without requiring authentication. Additionally, since no authentication is required, chat messages can be spoofed to appear to come from trusted entities. Therefore, abuse can lead to spam and enable social engineering, phishing and similar attacks. This issue is patched in version 1.10.7. Maintainers recommend that this SIP message type is authenticated by default so that FreeSWITCH administrators do not need to be explicitly set the `auth-messages` parameter. When following such a recommendation, a new parameter can be introduced to explicitly disable authentication.

In IQrouter through 3.3.1, the Lua function diag_set_password in the web-panel allows remote attackers to change the root password arbitrarily. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”

An issue was discovered in Dropbear through 2020.81. Due to a non-RFC-compliant check of the available authentication methods in the client-side SSH code, it is possible for an SSH server to change the login process in its favor. This attack can bypass additional security measures such as FIDO2 tokens or SSH-Askpass. Thus, it allows an attacker to abuse a forwarded agent for logging on to another server unnoticed.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

Dell PowerScale OneFS, versions 8.2.2-9.3.0.x, contain an authentication bypass by primary weakness in one of the authentication factors. A remote unauthenticated attacker may potentially exploit this vulnerability and bypass one of the factors of authentication.

Insufficient state checks lead to a vector that allows to bypass 2FA checks.

Insufficient state checks lead to a vector that allows to bypass 2FA checks.

Zoho ManageEngine Applications Manager 14780 and before allows a remote unauthenticated attacker to register managed servers via AAMRequestProcessor servlet.

Memos is a privacy-first, lightweight note-taking service that uses Access Tokens to authenticate application access. When a user changes their password, the existing list of Access Tokens stay valid instead of expiring. If a user finds that their account has been compromised, they can update their password. In versions up to and including 0.18.1, though, the bad actor will still have access to their account because the bad actor's Access Token stays on the list as a valid token. The user will have to manually delete the bad actor's Access Token to secure their account. The list of Access Tokens has a generic Description which makes it hard to pinpoint a bad actor in a list of Access Tokens. A known patched version of Memos isn't available. To improve Memos security, all Access Tokens will need to be revoked when a user changes their password. This removes the session for all the user's devices and prompts the user to log in again. One can treat the old Access Tokens as "invalid" because those Access Tokens were created with the older password.

A flaw was found in the OpenShift Router. When a Route has `insecureEdgeTerminationPolicy` set to Allow, the HTTP frontend does not remove `X-SSL-Client-*` headers from incoming requests. This allows an unauthenticated attacker to send plain HTTP requests with crafted `X-SSL-Client-*` headers. As a result, backends relying on these headers for mutual TLS (Transport Layer Security) authentication can be bypassed, enabling the attacker to impersonate client certificate identities.

MaxKB is an open-source AI assistant for enterprise. Prior to 2.9.0, MaxKB's webhook trigger endpoint (/api/trigger/v1/webhook/{trigger_id}) is accessible without authentication. The WebhookAuth class unconditionally returns (None, {}), which Django REST Framework interprets as successful authentication. Combined with optional per-trigger token verification and no backend enforcement of token requirements, any unauthenticated attacker who knows a valid trigger ID can invoke webhook triggers to execute their bound tasks. This vulnerability is fixed in 2.9.0.

The OpenID Single Sign-On authentication functionality in OXID eShop before 4.5.0 allows remote attackers to impersonate users via the email address in a crafted authentication token.

Bulwark Webmail is a self-hosted webmail client for Stalwart Mail Server. Prior to version 1.4.10, the verifyIdentity() function contained logic that returned true if no session cookies were present. This allowed unauthenticated attackers to bypass security checks and access/modify user settings via the /api/settings endpoint by providing arbitrary headers. This issue has been patched in version 1.4.10.

ajenti.plugin.core defines all necessary core elements to allow Ajenti to run properly. Prior to 0.112, if the 2FA was activated, it was possible to bypass the password authentication This vulnerability is fixed in 0.112.

A vulnerability, which was classified as critical, has been found in 20120630 Novel-Plus up to 0e156c04b4b7ce0563bef6c97af4476fcda8f160. This issue affects the function addCrawlSource of the file novel-crawl/src/main/java/com/java2nb/novel/controller/CrawlController.java. The manipulation leads to missing authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, AES/CBC/PKCS5Padding lacks authentication, making it vulnerable to padding oracle attacks and ciphertext manipulation. This vulnerability is fixed in 2.2.

This issue was addressed through improved state management. This issue is fixed in macOS Tahoe 26. Incoming FaceTime calls can appear or be accepted on a locked macOS device, even with notifications disabled on the lock screen.

An authentication bypass vulnerability was found in overt-engine. This flaw allows the creation of users in the system without authentication due to a flaw in the CreateUserSession command.

The SimpleCaptcha implementation in Liferay Portal 7.3.4, 7.3.5 and Liferay DXP 7.3 before fix pack 1 does not invalidate CAPTCHA answers after it is used, which allows remote attackers to repeatedly perform actions protected by a CAPTCHA challenge by reusing the same CAPTCHA answer.

wolfssl before 3.2.0 has a server certificate that is not properly authorized for server authentication.

Insufficient state checks lead to a vector that allows to bypass 2FA checks.

Any unauthenticated user may send e-mail from the site with any title or content to the admin

An improper authentication vulnerability was identified in GitHub Enterprise Server that allowed a bypass of Private Mode by using a specially crafted API request. To exploit this vulnerability, an attacker would need network access to the Enterprise Server appliance configured in Private Mode. This vulnerability affected all versions of GitHub Enterprise Server since 3.9 and was fixed in version 3.9.7, 3.10.4, and 3.11.1. This vulnerability was reported via the GitHub Bug Bounty program.

NiceGUI is an easy-to-use, Python-based UI framework. Prior to 2.9.1, authenticating with NiceGUI logged in the user for all browsers, including browsers in incognito mode. This vulnerability is fixed in 2.9.1.

RobotsAndPencils go-saml, a SAML client library written in Go, contains an authentication bypass vulnerability in all known versions. This is due to how the `xmlsec1` command line tool is called internally to verify the signature of SAML assertions. When `xmlsec1` is used without defining the enabled key data, the origin of the public key for the signature verification is, unfortunately, not restricted. That means an attacker can sign the SAML assertions themselves and provide the required public key (e.g. an RSA key) directly embedded in the SAML token. Projects still using RobotsAndPencils/go-saml should move to another SAML library or alternatively remove support for SAML from their projects. The vulnerability can likely temporarily be fixed by forking the go-saml project and adding the command line argument `--enabled-key-data` and specifying a value such as `x509` or `raw-x509-cert` when calling the `xmlsec1` binary in the verify function. Please note that this workaround must be carefully tested before it can be used.

authentik is an open-source identity provider. When initialising a oauth2 flow with a `code_challenge` and `code_method` (thus requesting PKCE), the single sign-on provider (authentik) must check if there is a matching and existing `code_verifier` during the token step. Prior to versions 2023.10.4 and 2023.8.5, authentik checks if the contents of `code_verifier` is matching only when it is provided. When it is left out completely, authentik simply accepts the token request with out it; even when the flow was started with a `code_challenge`. authentik 2023.8.5 and 2023.10.4 fix this issue.

The optional ActiveMQ LDAP login module can be configured to use anonymous access to the LDAP server. In this case, for Apache ActiveMQ Artemis prior to version 2.16.0 and Apache ActiveMQ prior to versions 5.16.1 and 5.15.14, the anonymous context is used to verify a valid users password in error, resulting in no check on the password.

Improper MDM policy management vulnerability in KME module prior to KCS version 1.39 allows MDM users to bypass Knox Manage authentication.

A broken authentication vulnerability in 4D SAS 4D Server software v17, v18, v19 R7, and earlier allows attackers to send crafted TCP packets containing requests to perform arbitrary actions.