A vulnerability was found in the Hot Rod client. This security issue occurs as the Hot Rod client does not enable hostname validation when using TLS, possibly resulting in a man-in-the-middle (MITM) attack.

A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure.

A flaw was found in Rubygem MQTT. By default, the package used to not have hostname validation, resulting in possible Man-in-the-Middle (MITM) attack.

A flaw was found in Keycloak. The SingleUseObjectProvider, a global key-value store, lacks proper type and namespace isolation. This vulnerability allows an unauthenticated attacker to forge authorization codes. Successful exploitation can lead to the creation of admin-capable access tokens, resulting in privilege escalation.

A vulnerability was found in Ruby. The Ruby interpreter is vulnerable to the Marvin Attack. This attack allows the attacker to decrypt previously encrypted messages or forge signatures by exchanging a large number of messages with the vulnerable service.

A vulnerability was found in CRI-O, where it can be requested to take a checkpoint archive of a container and later be asked to restore it. When it does that restoration, it attempts to restore the mounts from the restore archive instead of the pod request. As a result, the validations run on the pod spec, verifying that the pod has access to the mounts it specifies are not applicable to a restored container. This flaw allows a malicious user to trick CRI-O into restoring a pod that doesn't have access to host mounts. The user needs access to the kubelet or cri-o socket to call the restore endpoint and trigger the restore.

A flaw was found in Undertow, which incorrectly parses cookies with certain value-delimiting characters in incoming requests. This issue could allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie values or spoof arbitrary additional cookie values, leading to unauthorized data access or modification. The main threat from this flaw impacts data confidentiality and integrity.

A flaw was found in Quarkus-HTTP, which incorrectly parses cookies with certain value-delimiting characters in incoming requests. This issue could allow an attacker to construct a cookie value to exfiltrate HttpOnly cookie values or spoof arbitrary additional cookie values, leading to unauthorized data access or modification. The main threat from this flaw impacts data confidentiality and integrity.

A flaw was found in APICast, when 3Scale's OIDC module does not properly evaluate the response to a mismatched token from a separate realm. This could allow a separate realm to be accessible to an attacker, permitting access to unauthorized information.

A flaw was found in Podman. In a Containerfile or Podman, data written to RUN --mount=type=bind mounts during the podman build is not discarded. This issue can lead to files created within the container appearing in the temporary build context directory on the host, leaving the created files accessible.

A flaw was found in Quarkus. This issue occurs when receiving a request over websocket with no role-based permission specified on the GraphQL operation, Quarkus processes the request without authentication despite the endpoint being secured. This can allow an attacker to access information and functionality outside of normal granted API permissions.

A flaw was found in pam_access, where certain rules in its configuration file are mistakenly treated as hostnames. This vulnerability allows attackers to trick the system by pretending to be a trusted hostname, gaining unauthorized access. This issue poses a risk for systems that rely on this feature to control who can access certain services or terminals.

A flaw was found in Open Cluster Management (OCM), the technology underlying Red Hat Advanced Cluster Management (ACM). Improper validation of Kubernetes client certificate renewal allows a managed cluster administrator to forge a client certificate that can be approved by the OCM controller. This enables cross-cluster privilege escalation and may allow an attacker to gain control over other managed clusters, including the hub cluster.

A flaw was found in the openstack-tripleo-common component of the Red Hat OpenStack Platform (RHOSP) director. This vulnerability allows an attacker to deploy potentially compromised container images via disabling TLS certificate verification for registry mirrors, which could enable a man-in-the-middle (MITM) attack.

A flaw was found in Kroxylicious. When establishing the connection with the upstream Kafka server using a TLS secured connection, Kroxylicious fails to properly verify the server's hostname, resulting in an insecure connection. For a successful attack to be performed, the attacker needs to perform a Man-in-the-Middle attack or compromise any external systems, such as DNS or network routing configuration. This issue is considered a high complexity attack, with additional high privileges required, as the attack would need access to the Kroxylicious configuration or a peer system. The result of a successful attack impacts both data integrity and confidentiality.

It was found that Satellite 5 configured with SSL/TLS for the PostgreSQL backend failed to correctly validate X.509 server certificate host name fields. A man-in-the-middle attacker could use this flaw to spoof a PostgreSQL server using a specially crafted X.509 certificate.

A flaw was found in all Openshift Enterprise versions using the openshift elasticsearch plugin. An attacker with knowledge of the given name used to authenticate and access Elasticsearch can later access it without the token, bypassing authentication. This attack also requires that the Elasticsearch be configured with an external route, and the data accessed is limited to the indices.

A flaw was found in Keycloak in versions before 10.0.0, where it does not perform the TLS hostname verification while sending emails using the SMTP server. This flaw allows an attacker to perform a man-in-the-middle (MITM) attack.

A flaw was found in fog-kubevirt. This vulnerability allows a remote attacker to perform a Man-in-the-Middle (MITM) attack due to disabled certificate validation. This enables the attacker to intercept and potentially alter sensitive communications between Satellite and OpenShift, resulting in information disclosure and data integrity compromise.

A flaw was found in foreman_kubevirt. When configuring the connection to OpenShift, the system disables SSL verification if a Certificate Authority (CA) certificate is not explicitly set. This insecure default allows a remote attacker, capable of intercepting network traffic between Satellite and OpenShift, to perform a Man-in-the-Middle (MITM) attack. Such an attack could lead to the disclosure or alteration of sensitive information.

A flaw was found in Podman. The podman machine init command fails to verify the TLS certificate when downloading the VM images from an OCI registry. This issue results in a Man In The Middle attack.

A vulnerability was found in keycloak before 6.0.2. The X.509 authenticator supports the verification of client certificates through the CRL, where the CRL list can be obtained from the URL provided in the certificate itself (CDP) or through the separately configured path. The CRL are often available over the network through unsecured protocols ('http' or 'ldap') and hence the caller should verify the signature and possibly the certification path. Keycloak currently doesn't validate signatures on CRL, which can result in a possibility of various attacks like man-in-the-middle.

It was found that Kubernetes as used by Openshift Enterprise 3 did not correctly validate X.509 client intermediate certificate host name fields. An attacker could use this flaw to bypass authentication requirements by using a specially crafted X.509 certificate.

A flaw was found in Keycloak. A Keycloak server configured to support mTLS authentication for OAuth/OpenID clients does not properly verify the client certificate chain. A client that possesses a proper certificate can authorize itself as any other client, therefore, access data that belongs to other clients.

A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.

It was found that SAML authentication in Keycloak 3.4.3.Final incorrectly authenticated expired certificates. A malicious user could use this to access unauthorized data or possibly conduct further attacks.

Android App 'MyPallete' and some of the Android banking applications based on 'MyPallete' do not verify X.509 certificates from servers, and also do not properly validate certificates with host-mismatch, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability has been identified in Bitdefender Total Security HTTPS scanning functionality where the software fails to properly validate website certificates. Specifically, if a site certificate lacks the "Server Authentication" specification in the Extended Key Usage extension, the product does not verify the certificate's compliance with the site, deeming such certificates as valid. This flaw could allow an attacker to perform a Man-in-the-Middle (MITM) attack, intercepting and potentially altering communications between the user and the website.

A vulnerability has been identified in Industrial Edge Management (All versions < V1.5.1). The affected software does not properly validate the server certificate when initiating a TLS connection. This could allow an attacker to spoof a trusted entity by interfering in the communication path between the client and the intended server.

Improper certificate validation in the identity provider connection components in Amazon Athena ODBC driver before 2.1.0.0 might allow a man-in-the-middle threat actor to intercept authentication credentials due to insufficient default transport security when connecting to identity providers. This only applies to connections with external identity providers and does not apply to connections with Athena. To remediate this issue, users should upgrade to version 2.1.0.0.

Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, `pki.verifyCertificateChain()` does not enforce RFC 5280 basicConstraints requirements when an intermediate certificate lacks both the `basicConstraints` and `keyUsage` extensions. This allows any leaf certificate (without these extensions) to act as a CA and sign other certificates, which node-forge will accept as valid. Version 1.4.0 patches the issue.

Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows OCSP designated-responder authorization bypass via missing signature verification. The OCSP response validation in public_key:pkix_ocsp_validate/5 does not verify that a CA-designated responder certificate was cryptographically signed by the issuing CA. Instead, it only checks that the responder certificate's issuer name matches the CA's subject name and that the certificate has the OCSPSigning extended key usage. An attacker who can intercept or control OCSP responses can create a self-signed certificate with a matching issuer name and the OCSPSigning EKU, and use it to forge OCSP responses that mark revoked certificates as valid. This affects SSL/TLS clients using OCSP stapling, which may accept connections to servers with revoked certificates, potentially transmitting sensitive data to compromised servers. Applications using the public_key:pkix_ocsp_validate/5 API directly are also affected, with impact depending on usage context. This vulnerability is associated with program files lib/public_key/src/pubkey_ocsp.erl and program routines pubkey_ocsp:is_authorized_responder/3. This issue affects OTP from OTP 27.0 until OTP 28.4.2 and 27.3.4.10 corresponding to public_key from 1.16 until 1.20.3 and 1.17.1.2, and ssl from 11.2 until 11.5.4 and 11.2.12.7.

A flaw was found in the python-scciclient when making an HTTPS connection to a server where the server's certificate would not be verified. This issue opens up the connection to possible Man-in-the-middle (MITM) attacks.

The kantan netprint App for Android 2.0.3 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

In versions of NGINX Controller prior to 3.2.0, communication between NGINX Controller and NGINX Plus instances skip TLS verification by default.

pgAdmin <= 9.9  is affected by a vulnerability in the LDAP authentication mechanism allows bypassing TLS certificate verification.

The netprint App for iOS 3.2.3 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

An Improper Certificate Validation vulnerability in the OPC-UA client and ANSL over TLS client used in Automation Studio versions before 6.5 could allow an unauthenticated attacker on the network to position themselves to intercept and interfere with data exchanges.

Traefik is an HTTP reverse proxy and load balancer. Prior to version 2.6.1, Traefik skips the router transport layer security (TLS) configuration when the host header is a fully qualified domain name (FQDN). For a request, the TLS configuration choice can be different than the router choice, which implies the use of a wrong TLS configuration. When sending a request using FQDN handled by a router configured with a dedicated TLS configuration, the TLS configuration falls back to the default configuration that might not correspond to the configured one. If the CNAME flattening is enabled, the selected TLS configuration is the SNI one and the routing uses the CNAME value, so this can skip the expected TLS configuration. Version 2.6.1 contains a patch for this issue. As a workaround, one may add the FDQN to the host rule. However, there is no workaround if the CNAME flattening is enabled.

Envoy is an open source edge and service proxy, designed for cloud-native applications. The default_validator.cc implementation used to implement the default certificate validation routines has a "type confusion" bug when processing subjectAltNames. This processing allows, for example, an rfc822Name or uniformResourceIndicator to be authenticated as a domain name. This confusion allows for the bypassing of nameConstraints, as processed by the underlying OpenSSL/BoringSSL implementation, exposing the possibility of impersonation of arbitrary servers. As a result Envoy will trust upstream certificates that should not be trusted.

Envoy is an open source edge and service proxy, designed for cloud-native applications. Envoy's tls allows re-use when some cert validation settings have changed from their default configuration. The only workaround for this issue is to ensure that default tls settings are used. Users are advised to upgrade.

The kantan netprint App for iOS 2.0.2 and earlier does not verify X.509 certificates from servers, which allows man-in-the-middle attackers to spoof servers and obtain sensitive information via a crafted certificate.

A vulnerability in the certificate validation of Cisco&nbsp;Expressway-C and Cisco&nbsp;TelePresence VCS could allow an unauthenticated, remote attacker to gain unauthorized access to sensitive data.&nbsp;&nbsp;The vulnerability is due to a lack of validation of the SSL server certificate that an affected device receives when it establishes a connection to a Cisco&nbsp;Unified Communications Manager device. An attacker could exploit this vulnerability by using a man-in-the-middle technique to intercept the traffic between the devices, and then using a self-signed certificate to impersonate the endpoint. A successful exploit could allow the attacker to view the intercepted traffic in clear text or alter the contents of the traffic. Note: Cisco&nbsp;Expressway-E is not affected by this vulnerability.Cisco&nbsp;has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

A vulnerability in the SSL/TLS implementation of Cisco Nexus Dashboard could allow an unauthenticated, remote attacker to alter communications with associated controllers or view sensitive information. This vulnerability exists because SSL server certificates are not validated when Cisco Nexus Dashboard is establishing a connection to Cisco Application Policy Infrastructure Controller (APIC), Cisco Cloud APIC, or Cisco Nexus Dashboard Fabric Controller, formerly Data Center Network Manager (DCNM) controllers. An attacker could exploit this vulnerability by using man-in-the-middle techniques to intercept the traffic between the affected device and the controllers, and then using a crafted certificate to impersonate the controllers. A successful exploit could allow the attacker to alter communications between devices or view sensitive information, including Administrator credentials for these controllers.

Improper handling and storage of certificates in CP Plus CP-VNR-3104 B3223P22C02424 allow attackers to decrypt communications or execute a man-in-the-middle attacks.

When AdaCore Ada Web Server 25.0.0 is linked with GnuTLS, the default behaviour of AWS.Client is vulnerable to a man-in-the-middle attack because of lack of verification of an HTTPS server's certificate (unless the using program specifies a TLS configuration).

The httplib and urllib Python libraries that Splunk shipped with Splunk Enterprise did not validate certificates using the certificate authority (CA) certificate stores by default in Splunk Enterprise versions before 9.0 and Splunk Cloud Platform versions before 8.2.2203. Python 3 client libraries now verify server certificates by default and use the appropriate CA certificate stores for each library. Apps and add-ons that include their own HTTP libraries are not affected. For Splunk Enterprise, update to Splunk Enterprise version 9.0 and Configure TLS host name validation for Splunk-to-Splunk communications (https://docs.splunk.com/Documentation/Splunk/9.0.0/Security/EnableTLSCertHostnameValidation) to enable the remediation.

Apache Sling Commons Messaging Mail provides a simple layer on top of JavaMail/Jakarta Mail for OSGi to send mails via SMTPS. To reduce the risk of "man in the middle" attacks additional server identity checks must be performed when accessing mail servers. For compatibility reasons these additional checks are disabled by default in JavaMail/Jakarta Mail. The SimpleMailService in Apache Sling Commons Messaging Mail 1.0 lacks an option to enable these checks for the shared mail session. A user could enable these checks nevertheless by accessing the session via the message created by SimpleMessageBuilder and setting the property mail.smtps.ssl.checkserveridentity to true. Apache Sling Commons Messaging Mail 2.0 adds support for enabling server identity checks and these checks are enabled by default. - https://javaee.github.io/javamail/docs/SSLNOTES.txt - https://javaee.github.io/javamail/docs/api/com/sun/mail/smtp/package-summary.html - https://github.com/eclipse-ee4j/mail/issues/429

ECOVACS lawnmowers and vacuums do not properly validate TLS certificates. An unauthenticated attacker can read or modify TLS traffic, possibly modifying firmware updates.