inventory in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23552.

webservice in Atos Unify OpenScape 4000 Platform and OpenScape 4000 Manager Platform 10 R1 before 10 R1.34.4 allows an unauthenticated attacker to run arbitrary commands on the platform operating system and achieve administrative access, aka OSFOURK-23710.

An issue was discovered in the lettre crate before 0.9.6 for Rust. In an e-mail message body, an attacker can place a . character after two <CR><LF> sequences and then inject arbitrary SMTP commands.

Tenda AC18 v15.03.05.19(6318_)_cn was discovered to contain a command injection vulnerability via the deviceName parameter in the setUsbUnload function.

Possible Command injection Vulnerability in iManager has been discovered in OpenText™ iManager 3.2.4.0000.

Command Injection vulnerability in MagnusSolution magnusbilling 6.x and 7.x allows remote attackers to run arbitrary commands via unauthenticated HTTP request.

TOTOLINK CP300+ V5.2cu.7594_B20200910 and before is vulnerable to command injection.

A vulnerability has been found in Tenda FH1203 2.0.1.6 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-258160. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda FH1205 2.0.0.7(775) and classified as critical. Affected by this vulnerability is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-258295. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

FitNesse all releases allows a remote authenticated attacker to execute arbitrary OS commands. Note: A contributor of FitNesse has claimed that this is not a vulnerability but a product specification and this is currently under further investigation.

A remote command injection vulnerability exists in the Barracuda Email Security Gateway (appliance form factor only) product effecting versions 5.1.3.001-9.2.0.006. The vulnerability arises out of a failure to comprehensively sanitize the processing of .tar file (tape archives). The vulnerability stems from incomplete input validation of a user-supplied .tar file as it pertains to the names of the files contained within the archive. As a consequence, a remote attacker can specifically format these file names in a particular manner that will result in remotely executing a system command through Perl's qx operator with the privileges of the Email Security Gateway product. This issue was fixed as part of BNSF-36456 patch. This patch was automatically applied to all customer appliances.

Osprey Pump Controller version 1.01 contains an unauthenticated command injection vulnerability that could allow system access with www-data permissions.

Tenda AC18 V15.03.05.05 contains a command injection vulnerablility in the deviceName parameter of formsetUsbUnload function.

A Command Injection vulnerability found in a Self-Hosted UniFi Network Servers (Linux) with UniFi Network Application (Version 8.0.28 and earlier) allows a malicious actor with UniFi Network Application Administrator credentials to escalate privileges to root on the host device. Affected Products: UniFi Network Application (Version 8.0.28 and earlier) . Mitigation: Update UniFi Network Application to Version 8.1.113 or later.

Jenkins Convert To Pipeline Plugin 1.0 and earlier uses basic string concatenation to convert Freestyle projects' Build Environment, Build Steps, and Post-build Actions to the equivalent Pipeline step invocations, allowing attackers able to configure Freestyle projects to prepare a crafted configuration that injects Pipeline script code into the (unsandboxed) Pipeline resulting from a convertion by Jenkins Convert To Pipeline Plugin.

An issue in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to execute arbitrary code via a crafted request.

A vulnerability has been identified in CP-8031 MASTER MODULE (All versions < CPCI85 V05), CP-8050 MASTER MODULE (All versions < CPCI85 V05). Affected devices are vulnerable to command injection via the web server port 443/tcp, if the parameter “Remote Operation” is enabled. The parameter is disabled by default. The vulnerability could allow an unauthenticated remote attacker to perform arbitrary code execution on the device.

Remote Code Execution vulnerability in Micro Focus ArcSight Enterprise Security Manager (ESM) product, affecting versions 7.0.2 through 7.5. The vulnerability could be exploited resulting in remote code execution.

Btrbk before 0.31.2 allows command execution because of the mishandling of remote hosts filtering SSH commands using ssh_filter_btrbk.sh in authorized_keys.

An issue found in NginxProxyManager v.2.9.19 allows an attacker to execute arbitrary code via a lua script to the configuration file.

On certain Ubiquiti devices, Command Injection exists via a GET request to stainfo.cgi (aka Show AP info) because the ifname variable is not sanitized, as demonstrated by shell metacharacters. The fixed version is v4.0.1 for 802.11 ISP products, v5.3.5 for AirMax ISP products, and v5.4.5 for AirSync firmware. For example, Nanostation5 (Air OS) is affected.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the enabled parameter at /setting/setWanIeCfg.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the key parameter in the function sub_ 40A774.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the wanStrategy parameter at /setting/setWanIeCfg.

A vulnerability was found in TOTOLINK A3002R 1.1.1-B20200824.0128. It has been classified as critical. This affects the function formWlSiteSurvey of the file /boafrm/formWlSiteSurvey. The manipulation of the argument wlanif leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

TP-Link TL-WPA8630P (US)_ V2_ Version 171011 was discovered to contain a command injection vulnerability via the devicePwd parameter in the function sub_ 40A80C.

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the upBw parameter at /setting/setWanIeCfg.

A vulnerability was reported in Lenovo Smart Camera X3, X5, and C2E that could allow command injection by setting a specially crafted network configuration. This vulnerability is the same as CNVD-2020-68652.

Netis WF2780 v2.1.40144 was discovered to contain a command injection vulnerability via the wps_ap_ssid5g parameter

TOTOlink A7100RU V7.4cu.2313_B20191024 was discovered to contain a command injection vulnerability via the downBw parameter at /setting/setWanIeCfg.

Sublime Text 4 was discovered to contain a command injection vulnerability via the New Build System module. NOTE: multiple third parties report that this is intended behavior.

Command inject in transfer from another server in extplorer 2.1.9 and prior allows attacker to inject command via the userfile[0] parameter.

Magento Commerce versions 2.4.2 (and earlier), 2.4.2-p1 (and earlier) and 2.3.7 (and earlier) are affected by an Improper Neutralization of Special Elements Used In A Command via the Data collection endpoint. An attacker with admin privileges can upload a specially crafted file to achieve remote code execution.

The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards.

A command injection vulnerability exists in the gena.cgi module of D-Link DAP-1650 devices. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

Zentao v18.0 to v18.10 was discovered to contain a remote code execution (RCE) vulnerability via the checkConnection method of /app/zentao/module/repo/model.php.

A command injection vulnerability exists in D-Link DAP-1650 devices when handling UPnP SUBSCRIBE messages. An unauthenticated attacker can exploit this vulnerability to gain command execution on the device as root.

Command injection vulnerability in EZ-Internet in Synology Router Manager (SRM) before 1.1.6-6931 allows remote authenticated users to execute arbitrary command via the username parameter.

An issue in idocv v.14.1.3_20231228 allows a remote attacker to execute arbitrary code and obtain sensitive information via a crafted script.

Proxy command injection vulnerability in Trend Micro InterScan Messaging Virtual Appliance 9.0 and 9.1 allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the "T" parameter within modTMCSS Proxy. Formerly ZDI-CAN-4745.

An issue in Dlink DIR-816A2 v.1.10CNB05 allows a remote attacker to execute arbitrary code via the wizardstep4_ssid_2 parameter in the sub_42DA54 function.

A vulnerability, which was classified as critical, has been found in 1Panel up to 1.10.1-lts. Affected by this issue is the function baseApi.UpdateDeviceSwap of the file /api/v1/toolbox/device/update/swap. The manipulation of the argument Path with the input 123123123\nopen -a Calculator leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. It is recommended to apply a patch to fix this issue. The identifier of this vulnerability is VDB-256304.

TOTOLINK X2000R_V2 V2.0.0-B20230727.10434 has a command injection vulnerability in the sub_449040 (handle function of formUploadFile) of /bin/boa.

NETIS SYSTEMS MW5360 V1.0.1.3031 was discovered to contain a command injection vulnerability via the password parameter on the login page.

There is a command injection vulnerability in the ssdpcgi_main function of cgibin binary in D-Link DIR-815 router firmware v1.04.

An issue in symphony v.3.6.3 and before allows a remote attacker to execute arbitrary code via the log4j component.

TOTOLINK_A3700R_V9.1.2u.6165_20211012has a command Injection vulnerability via setOpModeCfg

Versions of the package network before 0.7.0 are vulnerable to Arbitrary Command Injection due to use of the child_process exec function without input sanitization. If (attacker-controlled) user input is given to the mac_address_for function of the package, it is possible for the attacker to execute arbitrary commands on the operating system that this package is being run on.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Enphase IQ Gateway (formerly known as Envoy) allows OS Command Injection. This vulnerability is present in an internal script.This issue affects Envoy: from 4.x up to and including 8.x and is currently unpatched.

A Heap Overflow vulnerability in WLInfoRailService component of Ivanti Avalanche before 6.4.3 allows a remote unauthenticated attacker to execute arbitrary commands