D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at genacgi_main.
D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.
D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter.
An issue was discovered in D-Link DIR-806 devices. There is a command injection in function hnap_main, which calls system() without checking the parameter that can be controlled by user, and finally allows remote attackers to execute arbitrary shell commands with a special HTTP header.
A vulnerability was determined in D-Link DCS-933L up to 1.14.11. This affects an unknown function of the file /setSystemAdmin of the component alphapd. This manipulation of the argument AdminID causes command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was detected in D-Link DI-7100G C1 24.04.18D1. Affected by this issue is the function set_jhttpd_info. Performing a manipulation of the argument usb_username results in command injection. Remote exploitation of the attack is possible.
A vulnerability has been found in D-Link DWR-M921 1.1.50. This impacts an unknown function of the file /boafrm/formLtefotaUpgradeFibocom. Such manipulation of the argument fota_url leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.
A flaw has been found in D-Link DWR-M921 1.1.50. This affects the function sub_419920 of the file /boafrm/formLtefotaUpgradeQuectel. This manipulation of the argument fota_url causes command injection. It is possible to initiate the attack remotely. The exploit has been published and may be used.
A flaw has been found in D-Link DWR-M961 1.1.47. This vulnerability affects the function sub_419920 of the file /boafrm/formLtefotaUpgradeQuectel. This manipulation of the argument fota_url causes command injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.
A security flaw has been discovered in D-Link DIR-823X 250416. Impacted is the function sub_41E2A0 of the file /goform/set_mode. Performing a manipulation of the argument lan_gateway results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was detected in D-Link DWR-M920 1.1.50/1.1.70. Affected is the function sub_41C8E8 of the file /boafrm/formSmsManage. Performing a manipulation of the argument action_value results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used.
A vulnerability was detected in D-Link DWR-M920 up to 1.1.50. The affected element is the function sub_41CF20 of the file /boafrm/formUSSDSetup. The manipulation of the argument ussdValue results in command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.
A flaw has been found in D-Link DWR-M920 up to 1.1.50. The impacted element is the function sub_412DA0 of the file /boafrm/formIMEISetup. This manipulation of the argument IMEI_value causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used.
A weakness has been identified in D-Link DIR-823X 250416. Affected by this issue is the function sub_412E7C of the file /goform/set_wifidog_settings. Executing a manipulation of the argument wd_enable can lead to command injection. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.
A vulnerability was found in D-Link DI-8200G 17.12.20A1. This affects an unknown function of the file /upgrade_filter.asp. The manipulation of the argument path results in command injection. The attack may be performed from remote. The exploit has been made public and could be used.
A security vulnerability has been detected in D-Link DIR-852 1.00CN B09. Impacted is the function soapcgi_main of the file soap.cgi of the component SOAP Service. Such manipulation of the argument service leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability has been found in D-Link DIR-816L up to 2.06B01 and classified as critical. Affected by this vulnerability is the function lxmldbc_system of the file /htdocs/cgibin of the component Environment Variable Handler. The manipulation leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability classified as critical has been found in D-Link DIR‑817L up to 1.04B01. This affects the function lxmldbc_system of the file ssdpcgi. The manipulation leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in D-Link DIR-645 up to 1.05B01 and classified as critical. This issue affects the function ssdpcgi_main of the file /htdocs/cgibin of the component ssdpcgi. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
A Command Injection Vulnerability has been discovered in the DHCP daemon service of D-Link DIR895LA1 v102b07. The vulnerability exists in the lease renewal processing logic where the DHCP hostname parameter is directly concatenated into a system command without proper sanitization. When a DHCP client renews an existing lease with a malicious hostname, arbitrary commands can be executed with root privileges.
A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability classified as critical was found in D-Link DI-7300G+ 19.12.25A1. Affected by this vulnerability is an unknown functionality of the file httpd_debug.asp. The manipulation of the argument Time leads to os command injection. The exploit has been disclosed to the public and may be used.
HNAP1/control/SetMasterWLanSettings.php in D-Link D-Link Router DIR-846 DIR-846 A1_100.26 allows remote attackers to execute arbitrary commands via shell metacharacters in the ssid0 or ssid1 parameter.
D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.
A vulnerability classified as critical has been found in D-Link DIR-890L and DIR-806A1 up to 100CNb11/108B03. Affected is the function sub_175C8 of the file /htdocs/soap.cgi. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
D-link DI-8100 16.07.26A1 is vulnerable to Command Injection. An attacker can exploit this vulnerability by crafting specific HTTP requests, triggering the command execution flaw and gaining the highest privilege shell access to the firmware system.
A vulnerability was found in D-Link DIR-605L 2.13B01. It has been rated as critical. This issue affects the function sub_454F2C. The manipulation of the argument sysCmd leads to command injection. The attack may be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.
A vulnerability was found in D-Link DIR-619L 2.04B04. It has been classified as critical. This affects the function formSysCmd. The manipulation of the argument sysCmd leads to command injection. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.
D-Link DIR-816 A2V1.1.0B05 was found to contain a command injection in iptablesWebsFilterRun, which allows remote attackers to execute arbitrary commands via shell.
D-Link DIR-600 Hardware Version B5, Firmware Version 2.18 was discovered to contain a command injection vulnerability via the ST parameter in the lxmldbc_system() function.
A vulnerability was determined in D-Link DIR-820LW 2.03. Affected is the function ssdpcgi_main of the component SSDP. Executing a manipulation can lead to os command injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.
D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because SERVER_ID is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.
An issue in dlink DIR 832x 240802 allows a remote attacker to execute arbitrary code via the function 0x417234
A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the PrivateLogin field to Login.
A command injection vulnerability was discovered in the HNAP1 protocol in D-Link DIR-823G devices with firmware V1.0.2B05. An attacker is able to execute arbitrary web scripts via shell metacharacters in the Captcha field to Login.
An issue in dlink DIR 823x 240802 allows a remote attacker to execute arbitrary code via the target_addr key value and the function 0x41710c
D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Command Injection via cgibin, ssdpcgi_main.
An OS command injection vulnerability in D-Link DIR-823G firmware version 1.02B05 allows unauthorized attackers to execute arbitrary operating system commands via a crafted GET request to EXCU_SHELL.
A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.
The D-Link DSR-250 (3.14) DSR-1000N (2.11B201) UPnP service contains a command injection vulnerability, which can cause remote command execution.
D-Link Go-RT-AC750 GORTAC750_revA_v101b03 & GO-RT-AC750_revB_FWv200b02 is vulnerable to command injection via /htdocs/upnpinc/gena.php.
An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet.
D-Link DIR810LA1_FW102B22 was discovered to contain a command injection vulnerability via the Ping_addr function.
D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.
Multiple D-Link DIR-series routers, including DIR-110, DIR-412, DIR-600, DIR-610, DIR-615, DIR-645, and DIR-815 firmware version 1.03, contain a vulnerability in the service.cgi endpoint that allows remote attackers to execute arbitrary system commands without authentication. The flaw stems from improper input handling in the EVENT=CHECKFW parameter, which is passed directly to the system shell without sanitization. A crafted HTTP POST request can inject commands that are executed with root privileges, resulting in full device compromise. These router models are no longer supported at the time of assignment and affected version ranges may vary. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-08-21 UTC.
A vulnerability has been found in D-Link DAR-7000 3.2 and classified as critical. This vulnerability affects the function get_ip_addr_details of the file /view/vpn/sxh_vpn/sxh_vpnlic.php of the component HTTP POST Request Handler. The manipulation of the argument ethname leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.
D-Link DNS-343 ShareCenter devices running firmware versions up to and including 1.05 contain a command injection vulnerability in the Mail Test functionality. The web maintenance script posts to the internal goForm endpoint '/goform/Mail_Test' and uses several form parameters directly in a call to a system email utility without proper input validation. An unauthenticated remote attacker can supply crafted form data that injects shell commands, resulting in execution as root on the device. NOTE: The DNS-343 product line has been declared end-of-life.
A flaw has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20260205. The affected element is the function cgi_myfavorite_add/cgi_myfavorite_set/cgi_myfavorite_del/cgi_myfavorite_set_sort_info/cgi_myfavorite_remove_apkg/cgi_myfavorite_compare_apkg/cgi_mycloud_auto_downlaod of the file /cgi-bin/gui_mgr.cgi. This manipulation of the argument f_user causes command injection. Remote exploitation of the attack is possible. The exploit has been published and may be used.