A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.06B01. This affects the function formAutoDetecWAN_wizard4 of the file /goform/formAutoDetecWAN_wizard4. The manipulation of the argument curTime leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in D-Link DIR-665 1.00. This affects the function sub_AC78 of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-619L 2.06B01. This affects the function formSetWizard1 of the file /goform/formSetWizard1. The manipulation of the argument curTime leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.06B01 and classified as critical. This issue affects the function formSetACLFilter of the file /goform/formSetACLFilter. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-619L 2.06B01 and classified as critical. This vulnerability affects the function formSetWizard1 of the file /goform/formWlSiteSurvey. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-815 1.01. It has been declared as critical. This vulnerability affects the function sub_403794 of the file hedwig.cgi. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The login page on D-Link DIR-615 T1 20.10 devices allows remote attackers to bypass the CAPTCHA protection mechanism and conduct brute-force attacks.

A vulnerability has been found in D-Link DI-500WF-WT up to 20250511 and classified as critical. Affected by this vulnerability is the function sub_456DE8 of the file /msp_info.htm?flag=cmd of the component /usr/sbin/jhttpd. The manipulation of the argument cmd leads to command injection. The attack can be launched remotely.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Username field to Login.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Interface field to SetStaticRouteSettings.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the LoginPassword field to Login.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MaxIdTime field to SetWanSettings.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings, a related issue to CVE-2019-13482.

A vulnerability classified as critical has been found in D-Link DCS-5020L 1.01_B2. This affects the function websReadEvent of the file /rame/ptdc.cgi. The manipulation of the argument Authorization leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000 up to 20151231. It has been rated as critical. This issue affects some unknown processing of the file /useratte/userattestation.php. The manipulation of the argument web_img leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-240245 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the IPAddress key.

A vulnerability was found in D-Link DCS-932L 2.18.01 and classified as critical. Affected by this issue is the function sub_404780 of the file /bin/gpio. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings.

An issue was discovered on D-Link DIR-823G devices with firmware 1.02B03. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the IPAddress or Gateway field to SetStaticRouteSettings.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The D-Link DCS series of Wi-Fi cameras contains a stack-based buffer overflow in alphapd, the camera's web server. The overflow allows a remotely authenticated attacker to execute arbitrary code by providing a long string in the WEPEncryption parameter when requesting wireless.htm. Vulnerable devices include DCS-5009L (1.08.11 and below), DCS-5010L (1.14.09 and below), DCS-5020L (1.15.12 and below), DCS-5025L (1.03.07 and below), DCS-5030L (1.04.10 and below), DCS-930L (2.16.01 and below), DCS-931L (1.14.11 and below), DCS-932L (2.17.01 and below), DCS-933L (1.14.11 and below), and DCS-934L (1.05.04 and below).

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function sprintf of the file /goform/formSetWanNonLogin of the component Boa Webserver. The manipulation of the argument curTime leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02. It has been declared as critical. This vulnerability affects the function mod_graph_auth_uri_handler of the file /storage of the component Authentication Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in D-Link DIR-600L up to 2.07B01. This affects the function formSysCmd. The manipulation of the argument host leads to command injection. It is possible to initiate the attack remotely. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda DAP-1520 1.10B04_BETA02 and classified as critical. Affected by this issue is the function check_dws_cookie of the file /storage. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link DIR-823X firmware - 240126 was discovered to contain a remote command execution (RCE) vulnerability via the dhcpd_startip parameter at /goform/set_lan_settings.

A vulnerability was found in D-Link DI-500WF 17.04.10A1T. It has been declared as critical. Affected by this vulnerability is the function sprintf of the file ip_position.asp of the component jhttpd. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8100 1.0. It has been declared as critical. Affected by this vulnerability is the function sprintf of the file /ddns.asp?opt=add of the component jhttpd. The manipulation of the argument mx leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DI-8100 1.0. This vulnerability affects the function sprintf of the file /upnp_ctrl.asp of the component jhttpd. The manipulation of the argument remove_ext_proto/remove_ext_port leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in D-Link DIR-619L 2.06B01 and classified as critical. This vulnerability affects the function formSetWAN_Wizard51 of the file /goform/formSetWAN_Wizard51. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-619L 2.06B01 and classified as critical. This issue affects the function formAdvanceSetup of the file /goform/formAdvanceSetup. The manipulation of the argument webpage leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.06B01. Affected by this issue is the function formSetWANType_Wizard5 of the file /goform/formSetWANType_Wizard5. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in D-Link DIR-825 2.03. This affects the function do_file of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-842V2 v1.0.3 was discovered to contain a command injection vulnerability via the iperf3 diagnostics function.

A vulnerability, which was classified as critical, has been found in D-Link DIR-619L 2.06B01. Affected by this issue is the function formSetEnableWizard of the file /goform/formSetEnableWizard. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-867 1.0 and classified as critical. This vulnerability affects the function strncpy of the component Query String Handler. The manipulation leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. Affected is the function setSystemAdmin of the file /setSystemAdmin. The manipulation of the argument AdminID leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DSL-224 firmware version 3.0.10 allows post authentication command execution via an unspecified method.

D-Link D-View showUser Improper Authorization Privilege Escalation Vulnerability. This vulnerability allows remote attackers to escalate privileges on affected installations of D-Link D-View. Authentication is required to exploit this vulnerability. The specific flaw exists within the showUser method. The issue results from the lack of proper authorization before accessing a privileged endpoint. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the user. . Was ZDI-CAN-19534.

The D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has multiple command injection vulnerabilities in the web service framework. An attacker can forge malicious HTTP requests to execute commands; authentication is required before executing the attack.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been declared as critical. Affected by this vulnerability is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been rated as critical. Affected by this issue is the function dbsrv_asp of the file /dbsrv.asp. The manipulation of the argument str leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. This affects the function SubUPnPCSInit of the file /sbin/udev. The manipulation of the argument CameraName leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue found in D-Link DSL-3782 v.1.03 allows remote authenticated users to execute arbitrary code as root via the network settings page.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DAR-7000 up to 20151231. It has been classified as critical. This affects an unknown part of the file /sysmanage/updateos.php. The manipulation of the argument 1_file_upload leads to unrestricted upload. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-240243. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.