In the Linux kernel, the following vulnerability has been resolved: iommu: Fix potential use-after-free during probe Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function.

In the Linux kernel, the following vulnerability has been resolved: e100: Fix possible use after free in e100_xmit_prepare In e100_xmit_prepare(), if we can't map the skb, then return -ENOMEM, so e100_xmit_frame() will return NETDEV_TX_BUSY and the upper layer will resend the skb. But the skb is already freed, which will cause UAF bug when the upper layer resends the skb. Remove the harmful free.

In the Linux kernel, the following vulnerability has been resolved: drm/shmem-helper: Remove errant put in error path drm_gem_shmem_mmap() doesn't own this reference, resulting in the GEM object getting prematurely freed leading to a later use-after-free.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Prevent use after free on completion memory On driver unload any pending descriptors are flushed at the time the interrupt is freed: idxd_dmaengine_drv_remove() -> drv_disable_wq() -> idxd_wq_free_irq() -> idxd_flush_pending_descs(). If there are any descriptors present that need to be flushed this flow triggers a "not present" page fault as below: BUG: unable to handle page fault for address: ff391c97c70c9040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page The address that triggers the fault is the address of the descriptor that was freed moments earlier via: drv_disable_wq()->idxd_wq_free_resources() Fix the use after free by freeing the descriptors after any possible usage. This is done after idxd_wq_reset() to ensure that the memory remains accessible during possible completion writes by the device.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix use after free in remove_phb_dynamic() In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix use-after-free bug for mm struct Under certain conditions, such as MPI_Abort, the hfi1 cleanup code may represent the last reference held on the task mm. hfi1_mmu_rb_unregister() then drops the last reference and the mm is freed before the final use in hfi1_release_user_pages(). A new task may allocate the mm structure while it is still being used, resulting in problems. One manifestation is corruption of the mmap_sem counter leading to a hang in down_write(). Another is corruption of an mm struct that is in use by another task.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus).

In the Linux kernel, the following vulnerability has been resolved: erofs: fix pcluster use-after-free on UP platforms During stress testing with CONFIG_SMP disabled, KASAN reports as below: ================================================================== BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30 Read of size 8 at addr ffff8881094223f8 by task stress/7789 CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> .. __mutex_lock+0xe5/0xc30 .. z_erofs_do_read_page+0x8ce/0x1560 .. z_erofs_readahead+0x31c/0x580 .. Freed by task 7787 kasan_save_stack+0x1e/0x40 kasan_set_track+0x20/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0x10c/0x190 kmem_cache_free+0xed/0x380 rcu_core+0x3d5/0xc90 __do_softirq+0x12d/0x389 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x97/0xb0 call_rcu+0x3d/0x3f0 erofs_shrink_workstation+0x11f/0x210 erofs_shrink_scan+0xdc/0x170 shrink_slab.constprop.0+0x296/0x530 drop_slab+0x1c/0x70 drop_caches_sysctl_handler+0x70/0x80 proc_sys_call_handler+0x20a/0x2f0 vfs_write+0x555/0x6c0 ksys_write+0xbe/0x160 do_syscall_64+0x3b/0x90 The root cause is that erofs_workgroup_unfreeze() doesn't reset to orig_val thus it causes a race that the pcluster reuses unexpectedly before freeing. Since UP platforms are quite rare now, such path becomes unnecessary. Let's drop such specific-designed path directly instead.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free().

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix possible use-after-free in transport error_recovery work While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: peci: cpu: Fix use-after-free in adev_release() When auxiliary_device_add() returns an error, auxiliary_device_uninit() is called, which causes refcount for device to be decremented and .release callback will be triggered. Because adev_release() re-calls auxiliary_device_uninit(), it will cause use-after-free: [ 1269.455172] WARNING: CPU: 0 PID: 14267 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15 [ 1269.464007] refcount_t: underflow; use-after-free.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: avoid double fput() on failed usercopy If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix UAF of leds class devs at unbinding The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback. For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec.

In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful.

In the Linux kernel, the following vulnerability has been resolved: moxart: fix potential use-after-free on remove path It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink() While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it.

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: bfq: fix use-after-free in bfq_dispatch_request KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x6 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix possible use-after-free in transport error_recovery work While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to race between btf_try_get_module and load_module While working on code to populate kfunc BTF ID sets for module BTF from its initcall, I noticed that by the time the initcall is invoked, the module BTF can already be seen by userspace (and the BPF verifier). The existing btf_try_get_module calls try_module_get which only fails if mod->state == MODULE_STATE_GOING, i.e. it can increment module reference when module initcall is happening in parallel. Currently, BTF parsing happens from MODULE_STATE_COMING notifier callback. At this point, the module initcalls have not been invoked. The notifier callback parses and prepares the module BTF, allocates an ID, which publishes it to userspace, and then adds it to the btf_modules list allowing the kernel to invoke btf_try_get_module for the BTF. However, at this point, the module has not been fully initialized (i.e. its initcalls have not finished). The code in module.c can still fail and free the module, without caring for other users. However, nothing stops btf_try_get_module from succeeding between the state transition from MODULE_STATE_COMING to MODULE_STATE_LIVE. This leads to a use-after-free issue when BPF program loads successfully in the state transition, load_module's do_init_module call fails and frees the module, and BPF program fd on close calls module_put for the freed module. Future patch has test case to verify we don't regress in this area in future. There are multiple points after prepare_coming_module (in load_module) where failure can occur and module loading can return error. We illustrate and test for the race using the last point where it can practically occur (in module __init function). An illustration of the race: CPU 0 CPU 1 load_module notifier_call(MODULE_STATE_COMING) btf_parse_module btf_alloc_id // Published to userspace list_add(&btf_mod->list, btf_modules) mod->init(...) ... ^ bpf_check | check_pseudo_btf_id | btf_try_get_module | returns true | ... ... | module __init in progress return prog_fd | ... ... V if (ret < 0) free_module(mod) ... close(prog_fd) ... bpf_prog_free_deferred module_put(used_btf.mod) // use-after-free We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier callback when MODULE_STATE_LIVE state is reached for the module, so that we return NULL from btf_try_get_module for modules that are not fully formed. Since try_module_get already checks that module is not in MODULE_STATE_GOING state, and that is the only transition a live module can make before being removed from btf_modules list, this is enough to close the race and prevent the bug. A later selftest patch crafts the race condition artifically to verify that it has been fixed, and that verifier fails to load program (with ENXIO). Lastly, a couple of comments: 1. Even if this race didn't exist, it seems more appropriate to only access resources (ksyms and kfuncs) of a fully formed module which has been initialized completely. 2. This patch was born out of need for synchronization against module initcall for the next patch, so it is needed for correctness even without the aforementioned race condition. The BTF resources initialized by module initcall are set up once and then only looked up, so just waiting until the initcall has finished ensures correct behavior.

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add flush_workqueue to prevent uaf Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Don't remove map on creater_process and device_release Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: add vlan list lock to protect vlan list When adding port base VLAN, vf VLAN need to remove from HW and modify the vlan state in vf VLAN list as false. If the periodicity task is freeing the same node, it may cause "use after free" error. This patch adds a vlan list lock to protect the vlan list.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free when reverting termination table When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread() syzbot reports a f2fs bug as below: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_report+0xe8/0x550 mm/kasan/report.c:491 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline] __refcount_add include/linux/refcount.h:184 [inline] __refcount_inc include/linux/refcount.h:241 [inline] refcount_inc include/linux/refcount.h:258 [inline] get_task_struct include/linux/sched/task.h:118 [inline] kthread_stop+0xca/0x630 kernel/kthread.c:704 f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210 f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283 f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline] __f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is below race condition, it may cause use-after-free issue in sbi->gc_th pointer. - remount - f2fs_remount - f2fs_stop_gc_thread - kfree(gc_th) - f2fs_ioc_shutdown - f2fs_do_shutdown - f2fs_stop_gc_thread - kthread_stop(gc_th->f2fs_gc_task) : sbi->gc_thread = NULL; We will call f2fs_do_shutdown() in two paths: - for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore for fixing. - for f2fs_shutdown() path, it's safe since caller has already grabbed sb->s_umount semaphore.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not clean up repair bio if submit fails The submit helper will always run bio_endio() on the bio if it fails to submit, so cleaning up the bio just leads to a variety of use-after-free and NULL pointer dereference bugs because we race with the endio function that is cleaning up the bio. Instead just return BLK_STS_OK as the repair function has to continue to process the rest of the pages, and the endio for the repair bio will do the appropriate cleanup for the page that it was given.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcmu: Fix possible page UAF tcmu_try_get_data_page() looks up pages under cmdr_lock, but it does not take refcount properly and just returns page pointer. When tcmu_try_get_data_page() returns, the returned page may have been freed by tcmu_blocks_release(). We need to get_page() under cmdr_lock to avoid concurrent tcmu_blocks_release().

In the Linux kernel, the following vulnerability has been resolved: ep93xx: clock: Fix UAF in ep93xx_clk_register_gate() arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc] arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch if (IS_ERR(clk)) ^ arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released kfree(psc); ^~~~~~~~~~ arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed return &psc->hw; ^ ~~~~~~~~

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix potential use-after-free in ravb_rx_gbeth() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix perf_pending_task() UaF Per syzbot it is possible for perf_pending_task() to run after the event is free()'d. There are two related but distinct cases: - the task_work was already queued before destroying the event; - destroying the event itself queues the task_work. The first cannot be solved using task_work_cancel() since perf_release() itself might be called from a task_work (____fput), which means the current->task_works list is already empty and task_work_cancel() won't be able to find the perf_pending_task() entry. The simplest alternative is extending the perf_event lifetime to cover the task_work. The second is just silly, queueing a task_work while you know the event is going away makes no sense and is easily avoided by re-arranging how the event is marked STATE_DEAD and ensuring it goes through STATE_OFF on the way down.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Harden accesses to the reset domains Accessing reset domains descriptors by the index upon the SCMI drivers requests through the SCMI reset operations interface can potentially lead to out-of-bound violations if the SCMI driver misbehave. Add an internal consistency check before any such domains descriptors accesses.

In the Linux kernel, the following vulnerability has been resolved: net: arc_emac: Fix use after free in arc_mdio_probe() If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf.

In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hix5hd2_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: net: hisilicon: Fix potential use-after-free in hisi_femac_rx() The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free during gpu recovery [Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use after free in _scsih_expander_node_remove() The function mpt3sas_transport_port_remove() called in _scsih_expander_node_remove() frees the port field of the sas_expander structure, leading to the following use-after-free splat from KASAN when the ioc_info() call following that function is executed (e.g. when doing rmmod of the driver module): [ 3479.371167] ================================================================== [ 3479.378496] BUG: KASAN: use-after-free in _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.386936] Read of size 1 at addr ffff8881c037691c by task rmmod/1531 [ 3479.393524] [ 3479.395035] CPU: 18 PID: 1531 Comm: rmmod Not tainted 5.17.0-rc8+ #1436 [ 3479.401712] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.1 06/02/2021 [ 3479.409263] Call Trace: [ 3479.411743] <TASK> [ 3479.413875] dump_stack_lvl+0x45/0x59 [ 3479.417582] print_address_description.constprop.0+0x1f/0x120 [ 3479.423389] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.429469] kasan_report.cold+0x83/0xdf [ 3479.433438] ? _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.439514] _scsih_expander_node_remove+0x710/0x750 [mpt3sas] [ 3479.445411] ? _raw_spin_unlock_irqrestore+0x2d/0x40 [ 3479.452032] scsih_remove+0x525/0xc90 [mpt3sas] [ 3479.458212] ? mpt3sas_expander_remove+0x1d0/0x1d0 [mpt3sas] [ 3479.465529] ? down_write+0xde/0x150 [ 3479.470746] ? up_write+0x14d/0x460 [ 3479.475840] ? kernfs_find_ns+0x137/0x310 [ 3479.481438] pci_device_remove+0x65/0x110 [ 3479.487013] __device_release_driver+0x316/0x680 [ 3479.493180] driver_detach+0x1ec/0x2d0 [ 3479.498499] bus_remove_driver+0xe7/0x2d0 [ 3479.504081] pci_unregister_driver+0x26/0x250 [ 3479.510033] _mpt3sas_exit+0x2b/0x6cf [mpt3sas] [ 3479.516144] __x64_sys_delete_module+0x2fd/0x510 [ 3479.522315] ? free_module+0xaa0/0xaa0 [ 3479.527593] ? __cond_resched+0x1c/0x90 [ 3479.532951] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 3479.539607] ? syscall_enter_from_user_mode+0x21/0x70 [ 3479.546161] ? trace_hardirqs_on+0x1c/0x110 [ 3479.551828] do_syscall_64+0x35/0x80 [ 3479.556884] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3479.563402] RIP: 0033:0x7f1fc482483b ... [ 3479.943087] ================================================================== Fix this by introducing the local variable port_id to store the port ID value before executing mpt3sas_transport_port_remove(). This local variable is then used in the call to ioc_info() instead of dereferencing the freed port structure.

In the Linux kernel, the following vulnerability has been resolved: tipc: re-fetch skb cb after tipc_msg_validate As the call trace shows, the original skb was freed in tipc_msg_validate(), and dereferencing the old skb cb would cause an use-after-free crash. BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] Call Trace: <IRQ> tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] ... Allocated by task 47078: kmem_cache_alloc_node+0x158/0x4d0 __alloc_skb+0x1c1/0x270 tipc_buf_acquire+0x1e/0xe0 [tipc] tipc_msg_create+0x33/0x1c0 [tipc] tipc_link_build_proto_msg+0x38a/0x2100 [tipc] tipc_link_timeout+0x8b8/0xef0 [tipc] tipc_node_timeout+0x2a1/0x960 [tipc] call_timer_fn+0x2d/0x1c0 ... Freed by task 47078: tipc_msg_validate+0x7b/0x440 [tipc] tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] This patch fixes it by re-fetching the skb cb from the new allocated skb after calling tipc_msg_validate().

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL If we fail to copy the just created file descriptor to userland, we try to clean up by putting back 'fd' and freeing 'ib'. The code uses put_unused_fd() for the former which is wrong, as the file descriptor was already published by fd_install() which gets called internally by anon_inode_getfd(). This makes the error handling code leaving a half cleaned up file descriptor table around and a partially destructed 'file' object, allowing userland to play use-after-free tricks on us, by abusing the still usable fd and making the code operate on a dangling 'file->private_data' pointer. Instead of leaving the kernel in a partially corrupted state, don't attempt to explicitly clean up and leave this to the process exit path that'll release any still valid fds, including the one created by the previous call to anon_inode_getfd(). Simply return -EFAULT to indicate the error.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_rename_dir_prepare We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895 CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872 Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'. [ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ]

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix a race in rxrpc_exit_net() Current code can lead to the following race: CPU0 CPU1 rxrpc_exit_net() rxrpc_peer_keepalive_worker() if (rxnet->live) rxnet->live = false; del_timer_sync(&rxnet->peer_keepalive_timer); timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay); cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_exit_net() exits while peer_keepalive_timer is still armed, leading to use-after-free. syzbot report was: ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0 WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0 R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __debug_check_no_obj_freed lib/debugobjects.c:992 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023 kfree+0xd6/0x310 mm/slab.c:3809 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176 ops_free_list net/core/net_namespace.c:174 [inline] cleanup_net+0x591/0xb00 net/core/net_namespace.c:598 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK>

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Fix use-after-free and race in fastrpc_map_find Currently, there is a race window between the point when the mutex is unlocked in fastrpc_map_lookup and the reference count increasing (fastrpc_map_get) in fastrpc_map_find, which can also lead to use-after-free. So lets merge fastrpc_map_find into fastrpc_map_lookup which allows us to both protect the maps list by also taking the &fl->lock spinlock and the reference count, since the spinlock will be released only after. Add take_ref argument to make this suitable for all callers.

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix use-after-free in hsci KASAN found that addr was dereferenced after br2dev_event_work was freed. ================================================================== BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0 Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540 CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G E 6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1 Hardware name: IBM 8561 T01 703 (LPAR) Workqueue: 0.0.8000_event qeth_l2_br2dev_worker Call Trace: [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0 [<000000016942d118>] print_report+0x110/0x1f8 [<0000000167a7bd04>] kasan_report+0xfc/0x128 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0 [<00000001673edd1e>] process_one_work+0x76e/0x1128 [<00000001673ee85c>] worker_thread+0x184/0x1098 [<000000016740718a>] kthread+0x26a/0x310 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8 [<00000001694711da>] ret_from_fork+0xa/0x40 Allocated by task 108338: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 __kasan_kmalloc+0xa0/0xc0 qeth_l2_switchdev_event+0x25a/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Freed by task 540: kasan_save_stack+0x40/0x68 kasan_set_track+0x36/0x48 kasan_save_free_info+0x4c/0x68 ____kasan_slab_free+0x14e/0x1a8 __kasan_slab_free+0x24/0x30 __kmem_cache_free+0x168/0x338 qeth_l2_br2dev_worker+0x154/0x6b0 process_one_work+0x76e/0x1128 worker_thread+0x184/0x1098 kthread+0x26a/0x310 __ret_from_fork+0x8a/0xe8 ret_from_fork+0xa/0x40 Last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 insert_work+0x56/0x2e8 __queue_work+0x4ce/0xd10 queue_work_on+0xf4/0x100 qeth_l2_switchdev_event+0x520/0x738 atomic_notifier_call_chain+0x9c/0xf8 br_switchdev_fdb_notify+0xf4/0x110 fdb_notify+0x122/0x180 fdb_add_entry.constprop.0.isra.0+0x312/0x558 br_fdb_add+0x59e/0x858 rtnl_fdb_add+0x58a/0x928 rtnetlink_rcv_msg+0x5f8/0x8d8 netlink_rcv_skb+0x1f2/0x408 netlink_unicast+0x570/0x790 netlink_sendmsg+0x752/0xbe0 sock_sendmsg+0xca/0x110 ____sys_sendmsg+0x510/0x6a8 ___sys_sendmsg+0x12a/0x180 __sys_sendmsg+0xe6/0x168 __do_sys_socketcall+0x3c8/0x468 do_syscall+0x22c/0x328 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 Second to last potentially related work creation: kasan_save_stack+0x40/0x68 __kasan_record_aux_stack+0xbe/0xd0 kvfree_call_rcu+0xb2/0x760 kernfs_unlink_open_file+0x348/0x430 kernfs_fop_release+0xc2/0x320 __fput+0x1ae/0x768 task_work_run+0x1bc/0x298 exit_to_user_mode_prepare+0x1a0/0x1a8 __do_syscall+0x94/0xf0 system_call+0x82/0xb0 The buggy address belongs to the object at 00000000fdcea400 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 64 bytes inside of 96-byte region [00000000fdcea400, 00000000fdcea460) The buggy address belongs to the physical page: page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff) raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00 raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc 00000000fdcea380: fb fb fb fb fb fb f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix use-after-free warning Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.

xmlXIncludeAddNode in xinclude.c in libxml2 before 2.11.0 has a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity.

In the Linux kernel, the following vulnerability has been resolved: bnxt: prevent skb UAF after handing over to PTP worker When reading the timestamp is required bnxt_tx_int() hands over the ownership of the completed skb to the PTP worker. The skb should not be used afterwards, as the worker may run before the rest of our code and free the skb, leading to a use-after-free. Since dev_kfree_skb_any() accepts NULL make the loss of ownership more obvious and set skb to NULL.

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix use after free in fc_exch_abts_resp() fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: Fix potential use-after-free The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free.