The server in Circontrol Raption through 5.11.2 has a pre-authentication stack-based buffer overflow that can be exploited to gain run-time control of the device as root. The ocpp1.5 and pwrstudio binaries on the charging station do not use a number of common exploitation mitigations. In particular, there are no stack canaries and they do not use the Position Independent Executable (PIE) format.

An issue was discovered in Xen through 4.9.x. Grant copying code made an implication that any grant pin would be accompanied by a suitable page reference. Other portions of code, however, did not match up with that assumption. When such a grant copy operation is being done on a grant of a dying domain, the assumption turns out wrong. A malicious guest administrator can cause hypervisor memory corruption, most likely resulting in host crash and a Denial of Service. Privilege escalation and information leaks cannot be ruled out.

A stack-based buffer overflow exists in Juplink RX4-1500, a WiFi router, in versions 1.0.2 through 1.0.5. An authenticated attacker can exploit this vulnerability to achieve code execution as root.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTaskEdit. Executing a manipulation of the argument selDateType can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formP2PLimitConfig. Performing a manipulation of the argument except results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/formSyslogConf. The manipulation of the argument ServerIp results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Tenda RX3 16.03.13.11. This issue affects the function set_device_name of the file /goform/setBlackRule of the component MAC Filtering Configuration Endpoint. This manipulation of the argument devName/mac causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used.

A vulnerability was detected in UTT HiPER 810G up to 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formFireWall of the component Management Interface. The manipulation of the argument GroupName results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Zavio CF7500, CF7300, CF7201, CF7501, CB3211, CB3212, CB5220, CB6231, B8520, B8220, and CD321 IP Cameras with firmware version M2.1.6.05 are vulnerable to stack-based overflows. During the process of updating certain settings sent from incoming network requests, the product does not sufficiently check or validate allocated buffer size. This may lead to remote code execution.

A vulnerability has been found in Tenda TX3 up to 16.03.13.11_multi. This impacts an unknown function of the file /goform/SetIpMacBind. The manipulation of the argument list leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda AC8 16.03.33.05. Affected is the function fromSetWifiGusetBasic of the file /goform/WifiGuestSet of the component httpd. The manipulation of the argument shareSpeed results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used.

A vulnerability was identified in Tenda TX9 up to 22.03.02.10_multi. Affected by this issue is the function sub_4223E0 of the file /goform/setMacFilterCfg. Such manipulation of the argument deviceList leads to buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in Tenda RX3 16.03.13.11. Affected by this vulnerability is an unknown functionality of the file /goform/openSchedWifi. Performing a manipulation of the argument schedStartTime/schedEndTime results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Tenda RX3 16.03.13.11. Affected is an unknown function of the file /goform/fast_setting_wifi_set. Such manipulation of the argument ssid_5g leads to stack-based buffer overflow. The attack can be launched remotely. The exploit is publicly available and might be used.

A vulnerability was found in Tenda TX9 up to 22.03.02.10_multi. Affected is the function sub_42D03C of the file /goform/SetStaticRouteCfg. The manipulation of the argument list results in buffer overflow. The attack can be launched remotely. The exploit has been made public and could be used.

A vulnerability was found in Tenda RX3 16.03.13.11. The affected element is the function set_qosMib_list of the file /goform/formSetQosBand. Performing a manipulation of the argument list results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Totolink LR350 9.3.5u.6369_B20220309. This affects the function setWiFiEasyCfg of the file /cgi-bin/cstecgi.cgi. Such manipulation of the argument ssid leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formWebAuthGlobalConfig. Performing a manipulation results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Tenda AC23 16.03.07.52. This affects the function sscanf of the file /goform/PowerSaveSet. Executing a manipulation of the argument Time can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink LR350 9.3.5u.6369_B20220309. This vulnerability affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Performing a manipulation of the argument ssid results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Totolink LR350 9.3.5u.6369_B20220309. Affected by this vulnerability is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. Affected is the function strcpy of the file /goform/APSecurity. Executing a manipulation of the argument wepkey1 can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Tenda AX1803 1.0.0.1. The affected element is the function fromGetWifiGuestBasic of the file /goform/WifiGuestSet. Executing a manipulation of the argument guestWrlPwd/guestEn/guestSsid/hideSsid/guestSecurity can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A flaw has been found in Tenda AC23 16.03.07.52. This impacts an unknown function of the file /goform/WifiExtraSet. This manipulation of the argument wpapsk_crypto causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A vulnerability was determined in Totolink LR350 9.3.5u.6369_B20220309. Affected by this issue is the function setWiFiBasicCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function scheduleAdd of the file /goform/scheduleAdd. Performing manipulation of the argument ruleName results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Impacted is the function accessControlAdd of the file /goform/accessControlAdd. Such manipulation of the argument ruleName/schedule leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC20 16.03.08.12. This vulnerability affects the function save_virtualser_data of the file /goform/formSetVirtualSer. The manipulation of the argument list leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This impacts the function portRangeForwardAdd of the file /goform/portRangeForwardAdd. The manipulation of the argument ruleName/schedule/inboundFilter/TCPPorts/UDPPorts results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda AC20 16.03.08.12. This affects the function set_qosMib_list of the file /goform/SetNetControlList of the component SetNetControlList Endpoint. The manipulation of the argument list leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Tenda AC20 16.03.08.12. This issue affects the function sub_48E628 of the file /goform/SetIpMacBind. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RP_doSpecifySiteSurvey of the file /goform/RP_doSpecifySiteSurvey. The manipulation of the argument ssidhex leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function inboundFilterAdd of the file /goform/inboundFilterAdd. Executing manipulation of the argument ruleName can lead to stack-based buffer overflow. The attack may be performed from a remote location. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected is the function sta_wps_pin of the file /goform/sta_wps_pin. Performing manipulation of the argument Ssid results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function addStaProfile of the file /goform/addStaProfile. Performing manipulation of the argument profile_name/Ssid/wep_key_1/wep_key_2/wep_key_3/wep_key_4/wep_key_length/wep_default_key/cipher/passphrase results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ad_r, which has a size of 16 bytes. An attacker can send an arbitrarily long "ad_r" parameter in order to exploit this vulnerability.

A vulnerability has been found in Tenda M3 1.0.0.12. Affected by this vulnerability is the function formGetMasterPassengerAnalyseData of the file /goform/getMasterPassengerAnalyseData. The manipulation of the argument Time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function setSysAdm of the file /goform/setSysAdm. The manipulation of the argument admpasshint results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Linksys E1700 1.0.0.4.003. Affected by this vulnerability is the function setWan of the file /goform/setWan. This manipulation of the argument DeviceName/lanIp causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.