An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field.

The Yale WIPC-303W 2.21 through 2.31 camera is vulnerable to remote command execution (RCE) through command injection via the HTTP API. NOTE: This may be a duplicate of CVE-2020-10176

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

A remote code execution vulnerability exists in Magento 2.2 prior to 2.2.10, Magento 2.3 prior to 2.3.3 or 2.3.2-p1. An authenticated user with system data manipulation privileges can execute aribitrary code through arbitrary file deletion and OS command injection.

Nagios XI 5.7.2 is affected by a remote code execution (RCE) vulnerability. An authenticated user can inject additional commands into normal webapp query.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection'), Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Microchip TimeProvider 4100 (Configuration modules) allows Command Injection.This issue affects TimeProvider 4100: from 1.0 before 2.4.7.

A vulnerability was found in TOTOLINK T10 4.1.8cu.5207. It has been declared as critical. This vulnerability affects the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument command leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field.

An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field.

Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place.

Jenkins CryptoMove Plugin 0.1.33 and earlier allows attackers with Job/Configure access to execute arbitrary OS commands on the Jenkins master as the OS user account running Jenkins.

Access analysis CGI An-Analyzer released in 2019 June 24 and earlier allows remote authenticated attackers to execute arbitrary OS commands via the Management Page.

A vulnerability was found in DedeCMS up to 5.7.115. It has been rated as critical. This issue affects some unknown processing of the file /dede/article_string_mix.php. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

Apache Kylin 2.3.0, and releases up to 2.6.5 and 3.0.1 has some restful apis which will concatenate os command with the user input string, a user is likely to be able to execute any os command without any protection or validation.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated users to inject and execute arbitrary shell commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

In Ubiquiti Networks EdgeSwitch X v1.1.0 and prior, a privileged user can execute arbitrary shell commands over the SSH CLI interface. This allows to execute shell commands under the root user.

DrayTek Vigor2960 1.5.1 allows remote command execution via shell metacharacters in a toLogin2FA action to mainfunction.cgi.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/usb_restore_Form?script/.

A command injection vulnerability in the sandcat plugin of Caldera 2.3.1 and earlier allows authenticated attackers to execute any command or service.

Artica Web Proxy 4.30.000000 allows an authenticated remote attacker to inject commands via the service-cmds parameter in cyrus.php. These commands are executed with root privileges via service_cmds_peform.

In PHP versions 8.1.* before 8.1.30, 8.2.* before 8.2.24, 8.3.* before 8.3.12, when using a certain non-standard configurations of Windows codepages, the fixes for  CVE-2024-4577 https://github.com/advisories/GHSA-vxpp-6299-mxw3  may still be bypassed and the same command injection related to Windows "Best Fit" codepage behavior can be achieved. This may allow a malicious user to pass options to PHP binary being run, and thus reveal the source code of scripts, run arbitrary PHP code on the server, etc.

FaceSentry 6.4.8 contains an authenticated remote command injection vulnerability in pingTest.php and tcpPortTest.php scripts. Attackers can exploit unsanitized input parameters to inject and execute arbitrary shell commands with root privileges by manipulating the 'strInIP' and 'strInPort' parameters.

A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.

A vulnerability classified as critical has been found in D-Link DAR-7000 up to 20240912. Affected is an unknown function of the file /view/DBManage/Backup_Server_commit.php. The manipulation of the argument host leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

SmartLiving SmartLAN <=6.x contains an authenticated remote command injection vulnerability in the web.cgi binary through the 'par' POST parameter with the 'testemail' module. Attackers can exploit the unsanitized parameter and system() function call to execute arbitrary system commands with root privileges using default credentials.

Two OS command injection vulnerabilities in the User Portal of Sophos XG Firewall through 2020-08-05 potentially allow an authenticated attacker to remotely execute arbitrary code.

A vulnerability was found in OpenNetAdmin 18.1.1. It has been rated as critical. Affected by this issue is some unknown functionality. The manipulation leads to privilege escalation. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Cohesive Networks VNS3 Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cohesive Networks VNS3. Authentication is required to exploit this vulnerability. The specific flaw exists within the web service, which listens on TCP port 8000 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-24177.

sa-exim 4.2.1 allows attackers to execute arbitrary code if they can write a .cf file or a rule. This occurs because Greylisting.pm relies on eval (rather than direct parsing and/or use of the taint feature). This issue is similar to CVE-2018-11805.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220 and classified as critical. This vulnerability affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument slaveIpList leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.862_B20230228 and classified as critical. Affected by this vulnerability is the function setDiagnosisCfg. The manipulation leads to os command injection. The attack can be launched remotely. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This issue affects the function cgi_add_zip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

Artica Pandora FMS 7.44 allows remote command execution via the events feature.

A vulnerability was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. It has been rated as critical. This issue affects the function cgi_FMT_Std2R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi of the component HTTP POST Request Handler. The manipulation of the argument f_source_dev leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

A vulnerability classified as critical has been found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. Affected is the function cgi_FMT_R12R5_1st_DiskMGR of the file /cgi-bin/hd_config.cgi. The manipulation of the argument f_source_dev leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

A vulnerability classified as critical was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This vulnerability affects the function cgi_unzip of the file /cgi-bin/webfile_mgr.cgi of the component HTTP POST Request Handler. The manipulation of the argument path leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced.

NeDi 1.9C is vulnerable to Remote Command Execution. pwsec.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a pw parameter. (This can also be exploited via CSRF.)