A security vulnerability has been detected in Tenda AC18 15.03.05.19(6318). This vulnerability affects unknown code of the file /goform/SetUpnpCfg. The manipulation of the argument upnpEn leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in Tenda AC15 15.03.05.18. Affected is an unknown function of the file /goform/saveAutoQos. Performing manipulation of the argument enable results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited.

A vulnerability was found in Belkin F9K1015 1.00.10. This issue affects some unknown processing of the file /goform/formSetLanguage. Performing manipulation of the argument webpage results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda W12 3.0.0.6(3948). The affected element is the function wifiMacFilterSet of the file /goform/modules of the component HTTP Request Handler. The manipulation of the argument mac leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Belkin F9K1015 1.00.10. This affects an unknown part of the file /goform/formPPPoESetup. This manipulation of the argument pppUserName causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in TOTOLINK A3300R 17.0.0cu.557_B20221024. The affected element is the function setScheduleCfg of the file /cgi-bin/cstecgi.cgi of the component POST Parameter Handler. This manipulation of the argument recHour causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A vulnerability has been found in Belkin F9K1015 1.00.10. This vulnerability affects unknown code of the file /goform/formPPTPSetup. Such manipulation of the argument pptpUserName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Tenda CH22 1.0.0.1. This impacts the function fromAddressNat of the file /goform/addressNat. Performing manipulation of the argument page results in buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be exploited.

A vulnerability has been found in TOTOLINK A3300R 17.0.0cu.557_B20221024. The impacted element is the function setSyslogCfg of the file /cgi-bin/cstecgi.cgi of the component POST Parameter Handler. Such manipulation of the argument enable leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on Tenda AC6 V1.0 V15.03.05.19_multi_TD01, AC9 V1.0 V15.03.05.19(6318)_CN, AC9 V3.0 V15.03.06.42_multi, AC15 V1.0 V15.03.05.19_multi_TD01, and AC18 V15.03.05.19(6318_)_CN devices. There is a buffer overflow vulnerability in the router's web server -- httpd. While processing the /goform/openSchedWifi schedStartTime and schedEndTime parameters for a POST request, a value is directly used in a strcpy to a local variable placed on the stack, which overwrites the return address of a function. An attacker can construct a payload to carry out arbitrary code execution attacks.

A vulnerability was detected in Tenda O3 1.0.0.10(2478). This issue affects the function SetValue/GetValue of the file /goform/sysAutoReboot. Performing manipulation of the argument enable results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A buffer overflow was found in the MikroTik RouterOS SMB service when processing NetBIOS session request messages. Remote attackers with access to the service can exploit this vulnerability and gain code execution on the system. The overflow occurs before authentication takes place, so it is possible for an unauthenticated remote attacker to exploit it. All architectures and all devices running RouterOS before versions 6.41.3/6.42rc27 are vulnerable.

A vulnerability was detected in Tenda AC18 15.03.05.19(6318). This issue affects some unknown processing of the file /goform/SetDDNSCfg. The manipulation of the argument ddnsEn results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used.

An issue was discovered in Extreme Networks ExtremeWireless WiNG 5.x before 5.8.6.9 and 5.9.x before 5.9.1.3. There is a Hidden Root Shell by entering the administrator password in conjunction with the 'service start-shell' CLI command.

A security vulnerability has been detected in TOTOLINK N600R up to 4.3.0cu.7866_B20220506. This impacts the function setWiFiBasicConfig of the file /cgi-bin/cstecgi.cgi of the component HTTP Request Handler. Such manipulation of the argument wepkey leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in GE D60 Line Distance Relay devices running firmware Version 7.11 and prior. The SSH functions of the device are vulnerable to buffer overflow conditions that may allow a remote attacker to execute arbitrary code on the device.

A vulnerability was determined in Tenda O3 1.0.0.10(2478). Affected is the function SetValue/GetValue of the file /goform/setDhcpConfig. Executing manipulation of the argument dhcpEn can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in Tenda AC6 15.03.06.50. This issue affects some unknown processing of the file /goform/WifiGuestSet of the component HTTP Request Handler. Such manipulation of the argument shareSpeed leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda CH22 1.0.0.1. Affected by this issue is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter. Executing manipulation of the argument page can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A security flaw has been discovered in Tenda AC18 15.03.05.19(6318). Affected by this issue is some unknown functionality of the file /goform/fast_setting_pppoe_set. Performing manipulation of the argument Username results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited.

A vulnerability was found in Tenda AC7 15.03.06.44. The affected element is an unknown function of the file /goform/WifiMacFilterSet. Performing manipulation of the argument wifi_chkHz results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used.

Stack-based buffer overflow vulnerability in Circutor SGE-PLC1000/SGE-PLC50 v9.0.2. In the 'showMeterReport()' function, there is an unlimited user input that is copied to a fixed-size buffer via 'sprintf()'. The 'GetParameter(meter)' function retrieves the user input, which is directly incorporated into a buffer without size validation. An attacker can provide an excessively large input for the “meter” parameter.

A vulnerability was detected in Belkin F9K1015 1.00.10. Affected by this issue is some unknown functionality of the file /goform/formL2TPSetup. The manipulation of the argument L2TPUserName results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in TOTOLINK A3300R 17.0.0cu.557_B20221024. This affects the function setDmzCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ip leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in Belkin F9K1015 1.00.10. This impacts an unknown function of the file /goform/formWpsStart. Such manipulation of the argument pinCode leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function fromSafeClientFilter of the file /goform/SafeClientFilter. Performing manipulation of the argument page results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was identified in Tenda AC15 15.03.05.18. This impacts an unknown function of the file /goform/setNotUpgrade. Such manipulation of the argument newVersion leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Tenda AC23 up to 16.03.07.52. Affected by this vulnerability is the function sscanf of the file /goform/SetPptpServerCfg of the component HTTP POST Request Handler. Such manipulation of the argument startIp leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda AC18 15.03.05.19. This impacts an unknown function of the file /goform/saveAutoQos. This manipulation of the argument enable causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used.

A vulnerability was identified in Tenda AC20 up to 16.03.08.12. Affected by this issue is the function strcpy of the file /goform/SetPptpServerCfg of the component HTTP POST Request Handler. Such manipulation of the argument startIp leads to buffer overflow. The attack can be launched remotely. The exploit is publicly available and might be used.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

This issue is fixed in SCSSU-201801. A potential stack based buffer overflow existed in GemaltoKeyHandle.cpp.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 160 bytes. An attacker can send an arbitrarily long "directory" value in order to exploit this vulnerability.

nfs_lookup_reply in net/nfs.c in Das U-Boot through 2022.04 (and through 2022.07-rc2) has an unbounded memcpy with a failed length check, leading to a buffer overflow. NOTE: this issue exists because of an incorrect fix for CVE-2019-14196.

A vulnerability was identified in Tenda AC9 and AC15 15.03.05.14/15.03.05.18. This vulnerability affects the function formexeCommand of the file /goform/exeCommand. Such manipulation of the argument cmdinput leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used.

Multiple exploitable buffer overflow vulnerabilities exist in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. A strncpy overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

A vulnerability was found in Tenda AC1206 15.03.06.23. This vulnerability affects the function check_param_changed of the file /goform/AdvSetMacMtuWa of the component HTTP Request Handler. Performing manipulation of the argument wanMTU results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A vulnerability was identified in Tenda AC21 16.03.08.16. The affected element is the function sub_45BB10 of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

On Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17, the video-core process insecurely extracts the fields from the "shard" table of its SQLite database, leading to a buffer overflow on the stack. An attacker can send an HTTP request to trigger this vulnerability. The strcpy call overflows the destination buffer, which has a size of 16 bytes. An attacker can send an arbitrarily long "region" value in order to exploit this vulnerability.

An exploitable buffer overflow vulnerability exists in the credentials handler of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250-Firmware version 0.20.17. The strncpy overflows the destination buffer, which has a size of 64 bytes. An attacker can send an arbitrarily long "bucket" value in order to exploit this vulnerability.

A vulnerability has been found in MikroTik RouterOS 7. This affects the function parse_json_element of the file /rest/ip/address/print of the component libjson.so. The manipulation leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.20.1 and 7.21beta2 mitigates this issue. You should upgrade the affected component. The vendor replied: "Our bug tracker reports that your issue has been fixed. This means that we plan to release a RouterOS update with this fix. Make sure to upgrade to the next release when it comes out."

A vulnerability was identified in H3C Magic B3 up to 100R002. This affects the function AddMacList/EditMacList of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in B-Link BL-AC2100 up to 1.0.3. Affected by this issue is the function delshrpath of the file /goform/set_delshrpath_cfg of the component Web Management Interface. The manipulation of the argument Type results in stack-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in D-Link DIR-825 up to 2.10. Affected by this vulnerability is the function sub_4106d4 of the file apply.cgi. The manipulation of the argument countdown_time results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was detected in Tenda AC18 15.03.05.19. This affects an unknown function of the file /goform/WizardHandle. The manipulation of the argument WANT/mtuvalue results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A vulnerability was detected in Mercury KM08-708H GiGA WiFi Wave2 1.1.14. This affects an unknown function of the component HTTP Header Handler. The manipulation of the argument Host results in stack-based buffer overflow. The attack can be executed remotely. The exploit is now public and may be used.

A security vulnerability has been detected in D-Link DIR-513 A1FW110. Affected is an unknown function of the file /goform/formWPS. Such manipulation of the argument webpage leads to buffer overflow. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An exploitable buffer overflow vulnerabilities exist in the /cameras/XXXX/clips handler of video-core's HTTP server of Samsung SmartThings Hub with Firmware version 0.20.17. The video-core process incorrectly extracts fields from a user-controlled JSON payload, leading to a buffer overflow on the stack. The strncpy call overflows the destination buffer, which has a size of 52 bytes. An attacker can send an arbitrarily long "callbackUrl" value in order to exploit this vulnerability.