A vulnerability was found in Fujian Kelixun 1.0. It has been classified as critical. This affects an unknown part of the file /app/fax/fax_view.php of the component Filename Handler. The manipulation of the argument fax_file leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

The npm module "shell-quote" 1.6.0 and earlier cannot correctly escape ">" and "<" operator used for redirection in shell. Applications that depend on shell-quote may also be vulnerable. A malicious user could perform code injection.

Command injection vulnerability in login.php in Synology Photo Station before 6.5.3-3226 allows remote attackers to execute arbitrary code via shell metacharacters in the crafted 'X-Forwarded-For' header.

A vulnerability, which was classified as critical, has been found in DrayTek Vigor2960 and Vigor300B 1.5.1.3/1.5.1.4. This issue affects some unknown processing of the file /cgi-bin/mainfunction.cgi/apmcfgupptim of the component Web Management Interface. The manipulation of the argument session leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

The setFrom function in the Sendmail adapter in the zend-mail component before 2.4.11, 2.5.x, 2.6.x, and 2.7.x before 2.7.2, and Zend Framework before 2.4.11 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address.

It was found that RHSA-2018:2918 did not fully fix CVE-2018-16509. An attacker could possibly exploit another variant of the flaw and bypass the -dSAFER protection to, for example, execute arbitrary shell commands via a specially crafted PostScript document. This only affects ghostscript 9.07 as shipped with Red Hat Enterprise Linux 7.

The mail transport (aka Swift_Transport_MailTransport) in Swift Mailer before 5.4.5 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code via a \" (backslash double quote) in a crafted e-mail address in the (1) From, (2) ReturnPath, or (3) Sender header.

The festivaltts4r gem for Ruby allows remote attackers to execute arbitrary commands via shell metacharacters in a string to the (1) to_speech or (2) to_mp3 method in lib/festivaltts4r/festival4r.rb.

An issue was discovered on SendQuick Entera and Avera devices before 2HF16. Multiple Command Injection vulnerabilities allow attackers to execute arbitrary system commands.

The isMail transport in PHPMailer before 5.2.20 might allow remote attackers to pass extra parameters to the mail command and consequently execute arbitrary code by leveraging improper interaction between the escapeshellarg function and internal escaping performed in the mail function in PHP. NOTE: this vulnerability exists because of an incorrect fix for CVE-2016-10033.

A vulnerability, which was classified as critical, was found in DrayTek Vigor2960 and Vigor300B 1.5.1.4. Affected is an unknown function of the file /cgi-bin/mainfunction.cgi/apmcfgupload of the component Web Management Interface. The manipulation of the argument session leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.5 is able to address this issue. It is recommended to upgrade the affected component.

Mailcwp remote file upload vulnerability incomplete fix v1.100

A command Injection in ps package versions <1.0.0 for Node.js allowed arbitrary commands to be executed when attacker controls the PID.

Haraka version 2.8.8 and earlier comes with a plugin for processing attachments for zip files. Versions 2.8.8 and earlier can be vulnerable to command injection.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

In modules/HELPBOT_MODULE in Budabot 0.6 through 4.0, lax syntax validation allows remote attackers to perform a command injection attack against the PHP daemon with a crafted command, resulting in a denial of service or possibly unspecified other impact, as demonstrated by the "!calc 5 x 5" command. In versions before 3.0, modules/HELPBOT_MODULE/calc.php has the vulnerable code; in 3.0 and above, modules/HELPBOT_MODULE/HelpbotController.class.php has the vulnerable code.

IBM Rational Collaborative Lifecycle Management 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Quality Manager 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Team Concert 3.0.1.6 before iFix8, 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational DOORS Next Generation 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Engineering Lifecycle Manager 4.x before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; Rational Rhapsody Design Manager 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5; and Rational Software Architect Design Manager 4.0 before 4.0.7 iFix11, 5.0 before 5.0.2 iFix18, and 6.0 before 6.0.2 iFix5 allow remote authenticated users to execute arbitrary OS commands via a crafted request.

System command injection in the /DroboAccess/delete_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.

System command injection in the /DroboAccess/enable_user endpoint in Drobo 5N2 NAS version 4.0.5-13.28.96115 allows unauthenticated attackers to execute system commands via the "username" URL parameter.

A vulnerability was found in openBI up to 1.0.8 and classified as critical. This issue affects the function dlfile of the file /application/websocket/controller/Setting.php. The manipulation of the argument phpPath leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-252473 was assigned to this vulnerability.

FruityWifi (aka PatatasFritas/PatataWifi) 2.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the io_mode, ap_mode, io_action, io_in_iface, io_in_set, io_in_ip, io_in_mask, io_in_gw, io_out_iface, io_out_set, io_out_mask, io_out_gw, iface, or domain parameter to /www/script/config_iface.php, or the newSSID, hostapd_secure, hostapd_wpa_passphrase, or supplicant_ssid parameter to /www/page_config.php.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

Magento versions 2.3.4 and earlier, 2.2.11 and earlier (see note), 1.14.4.4 and earlier, and 1.9.4.4 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

A command injection vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2, with the improved password hashing method enabled, could allow an unauthenticated attacker to execute certain commands by providing a manipulated password.

Eval injection vulnerability in the fm_saveHelperGatherItems function in ajax.php in the Form Manager plugin before 1.7.3 for WordPress allows remote attackers to execute arbitrary code via unspecified vectors.

This affects all versions of package ts-process-promises. The injection point is located in line 45 in main entry of package in lib/process-promises.js. The vulnerability is demonstrated with the following PoC:

HP nagios plugin for iLO (nagios-plugins-hpilo v1.50 and earlier) has a php code injection vulnerability.

install-package through 0.4.0 is vulnerable to Command Injection. It allows execution of arbitrary commands via the options argument.

gulp-styledocco through 0.0.3 allows execution of arbitrary commands. The argument 'options' of the exports function in 'index.js' can be controlled by users without any sanitization.

node-prompt-here through 1.0.1 allows execution of arbitrary commands. The "runCommand()" is called by "getDevices()" function in file "linux/manager.js", which is required by the "index. process.env.NM_CLI" in the file "linux/manager.js". This function is used to construct the argument of function "execSync()", which can be controlled by users without any sanitization.

get-git-data through 1.3.1 is vulnerable to Command Injection. It is possible to inject arbitrary commands as part of the arguments provided to get-git-data.

apiconnect-cli-plugins through 6.0.1 is vulnerable to Command Injection.It allows execution of arbitrary commands via the pluginUri argument.

All versions of chrome-launcher allow execution of arbitrary commands, by controlling the $HOME environment variable in Linux operating systems.

pomelo-monitor through 0.3.7 is vulnerable to Command Injection.It allows injection of arbitrary commands as part of 'pomelo-monitor' params.

This affects the package connection-tester before 0.2.1. The injection point is located in line 15 in index.js. The following PoC demonstrates the vulnerability:

effect through 1.0.4 is vulnerable to Command Injection. It allows execution of arbitrary command via the options argument.

diskusage-ng through 0.2.4 is vulnerable to Command Injection.It allows execution of arbitrary commands via the path argument.

pixl-class prior to 1.0.3 allows execution of arbitrary commands. The members argument of the create function can be controlled by users without any sanitization.

A command injection vulnerability in the `devcert` module may lead to remote code execution when users of the module pass untrusted input to the `certificateFor` function.

node-mpv through 1.4.3 is vulnerable to Command Injection. It allows execution of arbitrary commands via the options argument.

The package get-npm-package-version before 1.0.7 are vulnerable to Command Injection via main function in index.js.

This affects all versions of package spritesheet-js. It depends on a vulnerable package platform-command. The injection point is located in line 32 in lib/generator.js, which is triggered by main entry of the package.

This affects all versions of package buns. The injection point is located in line 678 in index file lib/index.js in the exported function install(requestedModule).

npm-programmatic through 0.0.12 is vulnerable to Command Injection.The packages and option properties are concatenated together without any validation and are used by the 'exec' function directly.

op-browser through 1.0.6 is vulnerable to Command Injection. It allows execution of arbitrary commands via the url function.

This affects all versions of package freediskspace. The vulnerability arises out of improper neutralization of arguments in line 71 of freediskspace.js.

node-key-sender through 1.0.11 is vulnerable to Command Injection. It allows execution of arbitrary commands via the 'arrParams' argument in the 'execute()' function.