A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.

A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.

A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.

A vulnerability in Cisco Webex Teams, formerly Cisco Spark, could allow an authenticated, remote attacker to view and modify data for an organization other than their own organization. The vulnerability exists because the affected software performs insufficient checks for associations between user accounts and organization accounts. An attacker who has administrator or compliance officer privileges for one organization account could exploit this vulnerability by using those privileges to view and modify data for another organization account. No customer data was impacted by this vulnerability.

A vulnerability in the anti-spam protection mechanisms of Cisco AsyncOS Software for the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass certain content filters on an affected device. The vulnerability is due to incomplete input and validation checking mechanisms for certain Sender Policy Framework (SPF) messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. If successful, an exploit could allow the attacker to bypass the URL filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) and 11.0(1) improperly performs authorization, which allows remote authenticated users to read or write to stored data via unspecified vectors, aka Bug ID CSCuo89056.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) improperly performs authorization, which allows remote authenticated users to remove default messaging-queue system folders via unspecified vectors, aka Bug ID CSCuo89046.

The web interface in Cisco FireSIGHT Management Center 5.3.1.4 allows remote attackers to delete arbitrary system policies via modified parameters in a POST request, aka Bug ID CSCuu25390.

A vulnerability in the lobby ambassador web interface of Cisco IOS XE Wireless Controller Software could allow an authenticated, remote attacker to remove arbitrary users that are defined on an affected device. This vulnerability is due to insufficient access control of actions executed by lobby ambassador users. An attacker could exploit this vulnerability by logging in to an affected device with a lobby ambassador user account and sending crafted HTTP requests to the API. A successful exploit could allow the attacker to delete arbitrary user accounts on the device, including users with administrative privileges. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a lobby ambassador account. This account is not configured by default.

A vulnerability in the Cloud Connect component of Cisco Unified Contact Center Enterprise (CCE) could allow an unauthenticated, remote attacker to read and modify data on an affected device. This vulnerability is due to a lack of proper authentication controls. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port on an affected device. A successful exploit could allow the attacker to read or modify data on the affected device.

The Management Interface on Cisco Content Services Switch (CSS) 11500 devices 8.20.4.02 and earlier allows remote attackers to bypass intended restrictions on local-network device access via crafted SSH packets, aka Bug ID CSCut14855.

The Posture module for Cisco Identity Services Engine (ISE), as distributed in Cisco AnyConnect Secure Mobility Client 4.0(64), allows local users to gain privileges via unspecified commands, aka Bug ID CSCut05797.

Cisco ASR 9000 devices with software 5.3.0.BASE do not recognize that certain ACL entries have a single-host constraint, which allows remote attackers to bypass intended network-resource access restrictions by using an address that was not supposed to have been allowed, aka Bug ID CSCur28806.

Cisco Virtual TelePresence Server Software does not properly restrict use of the serial port, which allows local users to execute arbitrary OS commands as root by leveraging vSphere controller administrative privileges, aka Bug ID CSCus61123.

The failover ipsec implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1 before 9.1(6), 9.2 before 9.2(3.3), and 9.3 before 9.3(3) does not properly validate failover communication messages, which allows remote attackers to reconfigure an ASA device, and consequently obtain administrative control, by sending crafted UDP packets over the local network to the failover interface, aka Bug ID CSCur21069.

Cisco TelePresence T, TelePresence TE, and TelePresence TC before 7.1 do not properly implement access control, which allows remote attackers to obtain root privileges by sending packets on the local network and allows physically proximate attackers to obtain root privileges via unspecified vectors, aka Bug ID CSCub67651.

A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.

A vulnerability in the binding configuration of Cisco SD-WAN vManage Software containers could allow an unauthenticated, adjacent attacker who has access to the VPN0 logical network to also access the messaging service ports on an affected system. This vulnerability exists because the messaging server container ports on an affected system lack sufficient protection mechanisms. An attacker could exploit this vulnerability by connecting to the messaging service ports of the affected system. To exploit this vulnerability, the attacker must be able to send network traffic to interfaces within the VPN0 logical network. This network may be restricted to protect logical or physical adjacent networks, depending on device deployment configuration. A successful exploit could allow the attacker to view and inject messages into the messaging service, which can cause configuration changes or cause the system to reload.

A vulnerability in Cisco Catalyst Center, formerly Cisco DNA Center, could allow an authenticated, remote attacker to read and modify data in a repository that belongs to an internal service of an affected device. This vulnerability is due to insufficient enforcement of access control on HTTP requests. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected device. A successful exploit could allow the attacker to read and modify data that is handled by an internal service on the affected device.

A vulnerability in the GUI of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device. This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload using the Cisco ISE GUI. A successful exploit could allow the attacker to upload arbitrary files to an affected system.

A vulnerability in the API of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device. This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload request to a specific API endpoint. A successful exploit could allow the attacker to upload arbitrary files to an affected system.

A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface. This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to bypass authorization, access critical services, and cause a denial of service (DoS) condition. The vulnerability exists because the software fails to sanitize URLs before it handles requests. An attacker could exploit this vulnerability by submitting a crafted URL. A successful exploit could allow the attacker to gain unauthorized access to critical services and cause a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 11.0(5) for Wireless IP Phone 8821 and 8821-EX; and 12.5(1)SR1 for the IP Conference Phone 8832 and the rest of the IP Phone 8800 Series. Cisco IP Conference Phone 8831 is not affected.

A vulnerability in the detection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to send data directly to the kernel of an affected device. The vulnerability exists because the software improperly filters Ethernet frames sent to an affected device. An attacker could exploit this vulnerability by sending crafted packets to the management interface of an affected device. A successful exploit could allow the attacker to bypass the Layer 2 (L2) filters and send data directly to the kernel of the affected device. A malicious frame successfully delivered would make the target device generate a specific syslog entry.

A vulnerability in the application environment of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to gain unauthorized access to the JBoss Enterprise Application Platform (JBoss EAP) on an affected device. The vulnerability is due to an incorrect configuration of the authentication settings on the JBoss EAP. An attacker could exploit this vulnerability by authenticating with a specific low-privilege account. A successful exploit could allow the attacker to gain unauthorized access to the JBoss EAP, which should be limited to internal system accounts.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, local attacker to enable audio recording without notifying users. The vulnerability is due to the presence of unnecessary debug commands. An attacker could exploit this vulnerability by gaining unrestricted access to the restricted shell and using the specific debug commands. A successful exploit could allow the attacker to enable the microphone of an affected device to record audio without notifying users.

A vulnerability in the Common Execution Environment (CEE) ConfD CLI of Cisco Ultra Cloud Core - Subscriber Microservices Infrastructure (SMI) software could allow an authenticated, local attacker to escalate privileges on an affected device. This vulnerability is due to insufficient access control in the affected CLI. An attacker could exploit this vulnerability by authenticating as a CEE ConfD CLI user and executing a specific CLI command. A successful exploit could allow an attacker to access privileged containers with root privileges.

A vulnerability in the configuration file protections of Cisco Virtualized Infrastructure Manager (VIM) could allow an authenticated, local attacker to access confidential information and elevate privileges on an affected device. This vulnerability is due to improper access permissions for certain configuration files. An attacker with low-privileged credentials could exploit this vulnerability by accessing an affected device and reading the affected configuration files. A successful exploit could allow the attacker to obtain internal database credentials, which the attacker could use to view and modify the contents of the database. The attacker could use this access to the database to elevate privileges on the affected device.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Disaster Recovery framework of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), and Cisco Unity Connection could allow an authenticated, remote attacker to perform certain administrative actions they should not be able to. This vulnerability is due to insufficient access control checks on the affected device. An attacker with read-only privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to perform a set of administrative actions they should not be able to.

Multiple vulnerabilities in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an attacker to escape from the guest virtual machine (VM) to the host machine, inject commands that execute at the root level, or leak system data from the host to the VM. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the CLI of Cisco SD-WAN Software could allow an authenticated, local attacker to gain escalated privileges. This vulnerability is due to improper access control on files within the affected system. A local attacker could exploit this vulnerability by modifying certain files on the vulnerable device. If successful, the attacker could gain escalated privileges and take actions on the system with the privileges of the root user.

A vulnerability within the firewall configuration of the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) could allow an unauthenticated, adjacent attacker to gain privileged access to services only available on the internal network of the device. The vulnerability is due to an incorrect firewall rule on the device. The misconfiguration could allow traffic sent to the public interface of the device to be forwarded to the internal virtual network of the APIC-EM. An attacker that is logically adjacent to the network on which the public interface of the affected APIC-EM resides could leverage this behavior to gain access to services listening on the internal network with elevated privileges. This vulnerability affects appliances or virtual devices running Cisco Application Policy Infrastructure Controller Enterprise Module prior to version 1.5. Cisco Bug IDs: CSCve89638.

A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.

A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

dot11t/t_if_dot11_hal_ath.c in Cisco IOS 12.3, 12.4, 15.0, and 15.1 allows remote attackers to cause a denial of service (assertion failure and reboot) via 802.11 wireless traffic, as demonstrated by a video call from Apple iOS 5.0 on an iPhone 4S, aka Bug ID CSCtt94391.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the fabric infrastructure VLAN connection establishment of the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an unauthenticated, adjacent attacker to bypass security validations and connect an unauthorized server to the infrastructure VLAN. The vulnerability is due to insufficient security requirements during the Link Layer Discovery Protocol (LLDP) setup phase of the infrastructure VLAN. An attacker could exploit this vulnerability by sending a malicious LLDP packet on the adjacent subnet to the Cisco Nexus 9000 Series Switch in ACI mode. A successful exploit could allow the attacker to connect an unauthorized server to the infrastructure VLAN, which is highly privileged. With a connection to the infrastructure VLAN, the attacker can make unauthorized connections to Cisco Application Policy Infrastructure Controller (APIC) services or join other host endpoints.

A vulnerability in certain access control mechanisms for the Secure Shell (SSH) server implementation for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to access a CLI instance on an affected device. The vulnerability is due to a lack of proper input- and validation-checking mechanisms for inbound SSH connections on an affected device. An attacker could exploit this vulnerability by attempting to establish an SSH connection to an affected controller. An exploit could allow the attacker to access an affected device's CLI to potentially cause further attacks. This vulnerability has been fixed in version 8.5(140.0).

A vulnerability in access control list (ACL) functionality of the Gigabit Ethernet Management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XE Software 16.1.1 Release, which prevents the ACL from working when applied against the management interface. An attacker could exploit this issue by attempting to access the device via the management interface.

Cisco Webex Business Suite before 39.1.0 contains a vulnerability that could allow an unauthenticated, remote attacker to affect the integrity of the application. The vulnerability is due to improper validation of host header values. An attacker with a privileged network position, either a man-in-the-middle or by intercepting wireless network traffic, could exploit this vulnerability to manipulate header values sent by a client to the affected application. The attacker could cause the application to use input from the header to redirect a user from the Cisco Webex Meetings Online site to an arbitrary site of the attacker's choosing.

The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.

A vulnerability in the hxterm service of Cisco HyperFlex Software could allow an unauthenticated, local attacker to gain root access to all nodes in the cluster. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the hxterm service as a non-privileged, local user. A successful exploit could allow the attacker to gain root access to all member nodes of the HyperFlex cluster. This vulnerability affects Cisco HyperFlex Software Releases prior to 3.5(2a).