Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the authentication, authorization, and accounting (AAA) function of Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass NETCONF or RESTCONF authentication and do either of the following: Install, manipulate, or delete the configuration of an affected device Cause memory corruption that results in a denial of service (DoS) on an affected device This vulnerability is due to an uninitialized variable. An attacker could exploit this vulnerability by sending a series of NETCONF or RESTCONF requests to an affected device. A successful exploit could allow the attacker to use NETCONF or RESTCONF to install, manipulate, or delete the configuration of a network device or to corrupt memory on the device, resulting a DoS.

The web interface on the Cisco Scientific Atlanta WebSTAR DPC2100R2 cable modem with firmware 2.0.2r1256-060303 allows remote attackers to bypass authentication, and reset the modem or replace the firmware, via a direct request to an unspecified page.

Directory traversal vulnerability in Cisco AnyConnect Secure Mobility Client 4.0(2049) allows remote head-end systems to write to arbitrary files via a crafted configuration attribute, aka Bug ID CSCut93920.

A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365.

A vulnerability in the zip decompression engine of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper validation of zip files. An attacker could exploit this vulnerability by sending an email message with a crafted zip-compressed attachment. A successful exploit could trigger a restart of the content-scanning process, causing a temporary DoS condition. This vulnerability affects Cisco AsyncOS Software for Cisco ESA releases earlier than 13.0.

A vulnerability in the malware detection functionality in Cisco Advanced Malware Protection (AMP) in Cisco AsyncOS Software for Cisco Email Security Appliances (ESAs) could allow an unauthenticated remote attacker to exhaust resources on an affected device. The vulnerability is due to insufficient control over system memory allocation. An attacker could exploit this vulnerability by sending a crafted email through the targeted device. A successful exploit could allow the attacker to cause an email attachment that contains malware to be delivered to a user and cause email processing delays.

Format string vulnerability in Cisco Email Security Appliance (ESA) 7.6.0 and 8.0.0 allows remote attackers to cause a denial of service (memory overwrite or service outage) via format string specifiers in an HTTP request, aka Bug ID CSCug21497.

The Autonomic Networking Infrastructure (ANI) implementation in Cisco IOS 15.4S and 15.4(3)S allows remote attackers to modify configuration settings or cause a denial of service (partial service outage) by sending crafted Autonomic Networking (AN) messages on an intranet network, aka Bug ID CSCup62167.

Cisco IOS XR on Trident line cards in ASR 9000 devices lacks a static punt policer, which allows remote attackers to cause a denial of service (CPU consumption) by sending many crafted packets, aka Bug ID CSCun83985.

The phone-proxy implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0.3.6 and earlier does not properly validate X.509 certificates, which allows remote attackers to cause a denial of service (connection-database corruption) via an invalid entry, aka Bug ID CSCui33299.

The Flex-VPN load-balancing feature in the ipsec-ikev2 implementation in Cisco IOS before 15.1(1)SY3 does not require authentication, which allows remote attackers to trigger the forwarding of VPN traffic to an attacker-controlled destination, or the discarding of this traffic, by arranging for an arbitrary device to become a cluster member, aka Bug ID CSCub93641.

A vulnerability in the web management interface of Cisco Small Business 220 Series Smart Switches could allow an unauthenticated, remote attacker to upload arbitrary files. The vulnerability is due to incomplete authorization checks in the web management interface. An attacker could exploit this vulnerability by sending a malicious request to certain parts of the web management interface. Depending on the configuration of the affected switch, the malicious request must be sent via HTTP or HTTPS. A successful exploit could allow the attacker to modify the configuration of an affected device or to inject a reverse shell. This vulnerability affects Cisco Small Business 220 Series Smart Switches running firmware versions prior to 1.1.4.4 with the web management interface enabled. The web management interface is enabled via both HTTP and HTTPS by default.

A vulnerability in the application programming interface (API) of Cisco Smart Software Manager On-Prem could allow an unauthenticated, remote attacker to change user account information which can prevent users from logging in, resulting in a denial of service (DoS) condition of the web interface. The vulnerability is due to the lack of input validation in the API. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to change or corrupt user account information which could grant the attacker administrator access or prevent legitimate user access to the web interface, resulting in a denial of service (DoS) condition.

A vulnerability in the TCP Intercept functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured Access Control Policies (including Geolocation) and Service Polices on an affected system. The vulnerability exists because TCP Intercept is invoked when the embryonic connection limit is reached, which can cause the underlying detection engine to process the packet incorrectly. An attacker could exploit this vulnerability by sending a crafted stream of traffic that matches a policy on which TCP Intercept is configured. A successful exploit could allow the attacker to match on an incorrect policy, which could allow the traffic to be forwarded when it should be dropped. In addition, the traffic could incorrectly be dropped.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass FTP inspection. The vulnerability is due to ineffective flow tracking of FTP traffic. An attacker could exploit this vulnerability by sending crafted FTP traffic through an affected device. A successful exploit could allow the attacker to bypass FTP inspection and successfully complete FTP connections.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

dot11t/t_if_dot11_hal_ath.c in Cisco IOS 12.3, 12.4, 15.0, and 15.1 allows remote attackers to cause a denial of service (assertion failure and reboot) via 802.11 wireless traffic, as demonstrated by a video call from Apple iOS 5.0 on an iPhone 4S, aka Bug ID CSCtt94391.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

A vulnerability in the Cisco IOS XE SD-WAN Software CLI could allow an authenticated, local attacker to elevate privileges and execute arbitrary code on the underlying operating system as the root user. An attacker must be authenticated on an affected device as a PRIV15 user. This vulnerability is due to insufficient file system protection and the presence of a sensitive file in the bootflash directory on an affected device. An attacker could exploit this vulnerability by overwriting an installer file stored in the bootflash directory with arbitrary commands that can be executed with root-level privileges. A successful exploit could allow the attacker to read and write changes to the configuration database on the affected device.

A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the authentication and authorization checking mechanisms of Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, adjacent attacker to gain network access to a Cisco TrustSec domain. Under normal circumstances, this access should be prohibited. The vulnerability is due to the dynamic assignment of Security Group Tags (SGTs) during a wireless roam from one Service Set Identifier (SSID) to another within the Cisco TrustSec domain. An attacker could exploit this vulnerability by attempting to acquire an SGT from other SSIDs within the domain. Successful exploitation could allow the attacker to gain privileged network access that should be prohibited under normal circumstances.

A vulnerability in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. This vulnerability is due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit this vulnerability by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should trigger and drop for the ENIP packet.

A vulnerability in the Graphite web interface of the Policy and Charging Rules Function (PCRF) of Cisco Policy Suite (CPS) could allow an unauthenticated, remote attacker to access the Graphite web interface. The attacker would need to have access to the internal VLAN where CPS is deployed. The vulnerability is due to lack of authentication. An attacker could exploit this vulnerability by directly connecting to the Graphite web interface. An exploit could allow the attacker to access various statistics and Key Performance Indicators (KPIs) regarding the Cisco Policy Suite environment.

A vulnerability in the email filtering mechanism of Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to bypass the configured rules and allow emails that should have been denied to flow through an affected device.   This vulnerability is due to improper handling of email that passes through an affected device. An attacker could exploit this vulnerability by sending a crafted email through the affected device. A successful exploit could allow the attacker to bypass email filters on the affected device.

A vulnerability in Cisco NX-OS System Software running on Cisco MDS Multilayer Director Switches, Cisco Nexus 7000 Series Switches, and Cisco Nexus 7700 Series Switches could allow an authenticated, local attacker to access the Bash shell of an affected device's operating system, even if the Bash shell is disabled on the system. The vulnerability is due to insufficient sanitization of user-supplied parameters that are passed to certain functions of the Python scripting sandbox of the affected system. An attacker could exploit this vulnerability to escape the scripting sandbox and enter the Bash shell of the operating system with the privileges of the authenticated user for the affected system. To exploit this vulnerability, the attacker must have local access to the affected system and be authenticated to the affected system with administrative or Python execution privileges. Cisco Bug IDs: CSCvd86513.

A vulnerability within the firewall configuration of the Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) could allow an unauthenticated, adjacent attacker to gain privileged access to services only available on the internal network of the device. The vulnerability is due to an incorrect firewall rule on the device. The misconfiguration could allow traffic sent to the public interface of the device to be forwarded to the internal virtual network of the APIC-EM. An attacker that is logically adjacent to the network on which the public interface of the affected APIC-EM resides could leverage this behavior to gain access to services listening on the internal network with elevated privileges. This vulnerability affects appliances or virtual devices running Cisco Application Policy Infrastructure Controller Enterprise Module prior to version 1.5. Cisco Bug IDs: CSCve89638.

The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.

A vulnerability in the hybrid access control list (ACL) processing of IPv4 packets in Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to incorrect handling of packets when a specific configuration of the hybrid ACL exists. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass a configured ACL on the affected device. For more information, see the section of this advisory. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

A vulnerability in the access control list (ACL) programming of Cisco IOS Software that is running on Cisco Catalyst 1000 Switches and Cisco Catalyst 2960L Switches could allow an unauthenticated, remote attacker to bypass a configured ACL. This vulnerability is due to the use of both an IPv4 ACL and a dynamic ACL of IP Source Guard on the same interface, which is an unsupported configuration. An attacker could exploit this vulnerability by attempting to send traffic through an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. Note: Cisco documentation has been updated to reflect that this is an unsupported configuration. However, Cisco is publishing this advisory because the device will not prevent an administrator from configuring both features on the same interface. There are no plans to implement the ability to configure both features on the same interface on Cisco Catalyst 1000 or Catalyst 2960L Switches.

A vulnerability in Cisco Catalyst Center, formerly Cisco DNA Center, could allow an authenticated, remote attacker to read and modify data in a repository that belongs to an internal service of an affected device. This vulnerability is due to insufficient enforcement of access control on HTTP requests. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected device. A successful exploit could allow the attacker to read and modify data that is handled by an internal service on the affected device.

A vulnerability in the Cloud Connect component of Cisco Unified Contact Center Enterprise (CCE) could allow an unauthenticated, remote attacker to read and modify data on an affected device. This vulnerability is due to a lack of proper authentication controls. An attacker could exploit this vulnerability by sending crafted TCP data to a specific port on an affected device. A successful exploit could allow the attacker to read or modify data on the affected device.

A vulnerability in the API of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker with administrative privileges to upload files to an affected device. This vulnerability is due to improper validation of the file copy function. An attacker could exploit this vulnerability by sending a crafted file upload request to a specific API endpoint. A successful exploit could allow the attacker to upload arbitrary files to an affected system.

A vulnerability in the directory permissions of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to write arbitrary files on an affected device. This vulnerability is due to a lack of proper authentication controls. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to perform arbitrary file writes to specific directories in the underlying operating system. Note: To exploit this vulnerability, Web Access must be enabled on the phone. Web Access is disabled by default.

A vulnerability in the anti-spam protection mechanisms of Cisco AsyncOS Software for the Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass certain content filters on an affected device. The vulnerability is due to incomplete input and validation checking mechanisms for certain Sender Policy Framework (SPF) messages that are sent to an affected device. An attacker could exploit this vulnerability by sending a customized SPF packet to an affected device. If successful, an exploit could allow the attacker to bypass the URL filters that are configured for the affected device, which could allow malicious URLs to pass through the device.

A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device.

A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.

A vulnerability in the web application of Cisco Common Services Platform Collector (CSPC) could allow an authenticated, remote attacker to specify non-log files as sources for syslog reporting. This vulnerability is due to improper restriction of the syslog configuration. An attacker could exploit this vulnerability by configuring non-log files as sources for syslog reporting through the web application. A successful exploit could allow the attacker to read non-log files on the CSPC.

A vulnerability in the Zone-Based Policy Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent the Zone-Based Policy Firewall from correctly classifying traffic. This vulnerability exists because ICMP and UDP responder-to-initiator flows are not inspected when the Zone-Based Policy Firewall has either Unified Threat Defense (UTD) or Application Quality of Experience (AppQoE) configured. An attacker could exploit this vulnerability by attempting to send UDP or ICMP flows through the network. A successful exploit could allow the attacker to inject traffic through the Zone-Based Policy Firewall, resulting in traffic being dropped because it is incorrectly classified or in incorrect reporting figures being produced by high-speed logging (HSL).

A vulnerability in the web-based messaging service interface of Cisco SD-WAN vManage Software could allow an unauthenticated, adjacent attacker to bypass authentication and authorization and modify the configuration of an affected system. To exploit this vulnerability, the attacker must be able to access an associated Cisco SD-WAN vEdge device. This vulnerability is due to insufficient authorization checks. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based messaging service interface of an affected system. A successful exploit could allow the attacker to gain unauthenticated read and write access to the affected vManage system. With this access, the attacker could access information about the affected vManage system, modify the configuration of the system, or make configuration changes to devices that are managed by the system.

A vulnerability in the fabric infrastructure VLAN connection establishment of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) Mode could allow an unauthenticated, adjacent attacker to bypass security validations and connect an unauthorized server to the infrastructure VLAN. This vulnerability is due to insufficient security requirements during the Link Layer Discovery Protocol (LLDP) setup phase of the infrastructure VLAN. An attacker could exploit this vulnerability by sending a crafted LLDP packet on the adjacent subnet to an affected device. A successful exploit could allow the attacker to connect an unauthorized server to the infrastructure VLAN, which is highly privileged. With a connection to the infrastructure VLAN, the attacker can make unauthorized connections to Cisco Application Policy Infrastructure Controller (APIC) services or join other host endpoints.

A vulnerability in an access control mechanism of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to access services beyond the scope of their authorization. This vulnerability is due to insufficient enforcement of access control in the affected software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow the attacker to overwrite policies and impact the configuration and operation of the affected device.

Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.

Multiple vulnerabilities in Cisco Intersight Virtual Appliance could allow an unauthenticated, adjacent attacker to access sensitive internal services from an external interface. These vulnerabilities are due to insufficient restrictions for IPv4 or IPv6 packets that are received on the external management interface. An attacker could exploit these vulnerabilities by sending specific traffic to this interface on an affected device. A successful exploit could allow the attacker to access sensitive internal services and make configuration changes on the affected device.

A vulnerability in the Local Packet Transport Services (LPTS) programming of the SNMP with the management plane protection feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to allow connections despite the management plane protection that is configured to deny access to the SNMP server of an affected device. This vulnerability is due to incorrect LPTS programming when using SNMP with management plane protection. An attacker could exploit this vulnerability by connecting to an affected device using SNMP. A successful exploit could allow the attacker to connect to the device on the configured SNMP ports. Valid credentials are required to execute any of the SNMP requests.

A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, adjacent attacker to gain access to sensitive information. This vulnerability is due to improper access controls on API endpoints when Cisco SD-WAN vManage Software is running in multi-tenant mode. An attacker with access to a device that is managed in the multi-tenant environment could exploit this vulnerability by sending a request to an affected API endpoint on the vManage system. A successful exploit could allow the attacker to gain access to sensitive information that may include hashed credentials that could be used in future attacks.