A vulnerability in a logging function of Cisco Nexus Dashboard Fabric Controller (NDFC) and Cisco Nexus Dashboard Orchestrator (NDO) could allow an attacker with access to a tech support file to view sensitive information. This vulnerability exists because HTTP proxy credentials could be recorded in an internal log that is stored in the tech support file. An attacker could exploit this vulnerability by accessing a tech support file that is generated from an affected system. A successful exploit could allow the attacker to view HTTP proxy server admin credentials in clear text that are configured on Nexus Dashboard to reach an external network. Note: Best practice is to store debug logs and tech support files safely and to share them only with trusted parties because they may contain sensitive information.

A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to access sensitive information on an affected device. This vulnerability is due to improper storage of sensitive information within the web UI of Session Initiation Protocol (SIP)-based phone loads. An attacker could exploit this vulnerability by browsing to the IP address of a device that has Web Access enabled. A successful exploit could allow the attacker to access sensitive information, including incoming and outgoing call records. Note: Web Access is disabled by default.

A vulnerability in the logging component of Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability is due to the storage of unencrypted credentials in certain logs. An attacker could exploit this vulnerability by accessing the logs on an affected system and obtaining credentials that they may not normally have access to. A successful exploit could allow the attacker to access sensitive information from the device.

A vulnerability in Cisco Duo Epic for Hyperdrive could allow an authenticated, local attacker to view sensitive information in cleartext on an affected system. This vulnerability is due to improper storage of an unencrypted registry key. A low-privileged attacker could exploit this vulnerability by viewing or querying the registry key on the affected system. A successful exploit could allow the attacker to view sensitive information in cleartext.

A vulnerability in the logging subsystem of Cisco Meeting Management could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. This vulnerability is due to improper storage of sensitive information within the web-based management interface of an affected device. An attacker could exploit this vulnerability by logging in to the web-based management interface. A successful exploit could allow the attacker to view sensitive data that is stored on the affected device.

A vulnerability in a logging function of Cisco Nexus Dashboard Insights could allow an attacker with access to a tech support file to view sensitive information. This vulnerability exists because remote controller credentials are recorded in an internal log that is stored in the tech support file. An attacker could exploit this vulnerability by accessing a tech support file that is generated from an affected system. A successful exploit could allow the attacker to view remote controller admin credentials in clear text. Note: Best practice is to store debug logs and tech support files safely and to share them only with trusted parties because they may contain sensitive information.

A vulnerability in the XSI-Actions interface of Cisco BroadWorks Application Server could allow an authenticated, remote attacker to access sensitive information on an affected system. This vulnerability is due to improper input validation and authorization of specific commands that a user can execute within the XSI-Actions interface. An attacker could exploit this vulnerability by authenticating to an affected device and issuing a specific set of commands. A successful exploit could allow the attacker to join a Call Center instance and have calls that they do not have permissions to access distributed to them from the Call Center queue. At the time of publication, Cisco had not released updates that address this vulnerability for Cisco BroadWorks Application Server. However, firmware patches are available.

A vulnerability in the Web Access feature of Cisco IP Phones Series 7800 and Series 8800 could allow an unauthenticated, remote attacker to view sensitive information on an affected device. The vulnerability is due to improper access controls on the web-based management interface of an affected device. An attacker could exploit this vulnerability by sending malicious requests to the device, which could allow the attacker to bypass access restrictions. A successful attack could allow the attacker to view sensitive information, including device call logs that contain names, usernames, and phone numbers of users of the device.

The management system of ZXCDN is impacted by the information leak vulnerability. Attackers can make further analysis according to the information returned by the program, and then obtain some sensitive information. This affects ZXCDN V7.01 all versions up to IAMV7.01.01.02.

GeoServer is an open source server that allows users to share and edit geospatial data. Starting in version 2.10.0 and prior to versions 2.24.4 and 2.25.1, GeoServer's Server Status page and REST API lists all environment variables and Java properties to any GeoServer user with administrative rights as part of those modules' status message. These variables/properties can also contain sensitive information, such as database passwords or API keys/tokens. Additionally, many community-developed GeoServer container images `export` other credentials from their start-up scripts as environment variables to the GeoServer (`java`) process. The precise scope of the issue depends on which container image is used and how it is configured. The `about status` API endpoint which powers the Server Status page is only available to administrators.Depending on the operating environment, administrators might have legitimate access to credentials in other ways, but this issue defeats more sophisticated controls (like break-glass access to secrets or role accounts).By default, GeoServer only allows same-origin authenticated API access. This limits the scope for a third-party attacker to use an administrator’s credentials to gain access to credentials. The researchers who found the vulnerability were unable to determine any other conditions under which the GeoServer REST API may be available more broadly. Users should update container images to use GeoServer 2.24.4 or 2.25.1 to get the bug fix. As a workaround, leave environment variables and Java system properties hidden by default. Those who provide the option to re-enable it should communicate the impact and risks so that users can make an informed choice.

Zulip is an open-source team collaboration tool. Zulip Server versions 2.1.0 above have a user interface tool, accessible only to server owners and server administrators, which provides a way to download a "public data" export. While this export is only accessible to administrators, in many configurations server administrators are not expected to have access to private messages and private streams. However, the "public data" export which administrators could generate contained the attachment contents for all attachments, even those from private messages and streams. Zulip Server version 5.4 contains a patch for this issue.

Just like in the previous report, an attacker could steal the account of different users. But in this case, it's a little bit more specific, because it is needed to be an editor in the same app as the victim.

Grafana is an open source observability and data visualization platform. Versions of Grafana for endpoints prior to 9.1.8 and 8.5.14 could leak authentication tokens to some destination plugins under some conditions. The vulnerability impacts data source and plugin proxy endpoints with authentication tokens. The destination plugin could receive a user's Grafana authentication token. Versions 9.1.8 and 8.5.14 contain a patch for this issue. As a workaround, do not use API keys, JWT authentication, or any HTTP Header based authentication.

Mattermost fails to properly sanitize the user object when updating the username, resulting in the password hash being included in the response body. 

PingCentral versions prior to listed versions expose Spring Boot actuator endpoints that with administrative authentication return large amounts of sensitive environmental and application information.

A high privileged user who has access to transaction SM59 can read connection details stored with the destination for http calls in SAP NetWeaver Application Server ABAP and ABAP Platform - versions 700, 701, 702, 710, 711, 730, 731, 740, 750, 751, 752, 753, 754, 755, 756.

The Migration, Backup, Staging – WPvivid plugin for WordPress is vulnerable to sensitive information disclosure of a WordPress site's database due to missing capability checks on the wp_ajax_wpvivid_add_remote AJAX action that allows low-level authenticated attackers to send back-ups to a remote location of their choice for review. This affects versions up to, and including 0.9.35.

IBM Qradar SIEM 7.5 could allow a privileged user to obtain sensitive domain information due to data being misidentified. IBM X-Force ID: 270372.

Allura Discussion and Allura Forum importing does not restrict URL values specified in attachments. Project administrators can run these imports, which could cause Allura to read local files and expose them.  Exposing internal files then can lead to other exploits, like session hijacking, or remote code execution. This issue affects Apache Allura from 1.0.1 through 1.15.0. Users are recommended to upgrade to version 1.16.0, which fixes the issue.  If you are unable to upgrade, set "disable_entry_points.allura.importers = forge-tracker, forge-discussion" in your .ini config file.

TYPO3 is an open source PHP based web content management system. Versions prior to 9.5.38, 10.4.33, 11.5.20, and 12.1.1 are subject to Sensitive Information Disclosure. Due to the lack of handling user-submitted YAML placeholder expressions in the site configuration backend module, attackers could expose sensitive internal information, such as system configuration or HTTP request messages of other website visitors. A valid backend user account having administrator privileges is needed to exploit this vulnerability. This issue has been patched in versions 9.5.38 ELTS, 10.4.33, 11.5.20, 12.1.1.

When dynamic templates are used (OTRSTicketForms), admin can use OTRS tags which are not masked properly and can reveal sensitive information. This issue affects: OTRS AG OTRSTicketForms 6.0.x version 6.0.40 and prior versions; 7.0.x version 7.0.29 and prior versions; 8.0.x version 8.0.3 and prior versions.

The WP-DownloadManager plugin for WordPress is vulnerable to arbitrary file read in all versions up to, and including, 1.68.10. This is due to a lack of restriction on the directory an administrator can select for storing downloads. This makes it possible for authenticated attackers, with Administrator-level access and above, to download and read any file on the server, including system and configuration files.

IBM QRadar SIEM 7.5 is vulnerable to information exposure allowing a delegated Admin tenant user with a specific domain security profile assigned to see data from other domains. This vulnerability is due to an incomplete fix for CVE-2022-34352. IBM X-Force ID: 266808.

GLPI stands for Gestionnaire Libre de Parc Informatique is a Free Asset and IT Management Software package, that provides ITIL Service Desk features, licenses tracking and software auditing. An API user can enumerate sensitive fields values on resources on which he has read access. Users are advised to upgrade to version 10.0.10. There are no known workarounds for this vulnerability.

IBM Cloud Pak for Business Automation 18.0.0, 18.0.1, 18.0.2, 19.0.1, 19.0.2, 19.0.3, 20.0.1, 20.0.2, 20.0.3, 21.0.1, 21.0.2, 21.0.3, 22.0.1, and 22.0.2 may reveal sensitive information contained in application configuration to developer and administrator users. IBM X-Force ID: 264805.

Cloud Explorer Lite is an open source cloud management platform. Prior to version 1.4.0, there is a risk of sensitive information leakage in the user information acquisition of CloudExplorer Lite. The vulnerability has been fixed in version 1.4.0.

IBM QRadar WinCollect Agent 10.0 through 10.1.7 could allow a privileged user to obtain sensitive information due to missing best practices. IBM X-Force ID: 213551.

IBM PowerVM Hypervisor FW950.00 through FW950.90, FW1020.00 through FW1020.40, and FW1030.00 through FW1030.30 could reveal sensitive partition data to a system administrator. IBM X-Force ID: 257135.

IBM TXSeries for Multiplatforms 8.1, 8.2, 9.1, CICS TX Standard, 11.1, CICS TX Advanced 10.1, and 11.1 could allow a privileged user to obtain highly sensitive information by enabling debug mode. IBM X-Force ID: 257104.

IBM Spectrum Protect Plus Server 10.1.13, under specific configurations, could allow an elevated user to obtain SMB credentials that may be used to access vSnap data stores. IBM X-Force ID: 249325.

Generated Support Bundles contains private S/MIME and PGP keys if containing folder is not hidden. This issue affects: OTRS AG ((OTRS)) Community Edition 6.0.x version 6.0.1 and later versions. OTRS AG OTRS 7.0.x version 7.0.28 and prior versions; 8.0.x version 8.0.15 and prior versions.

The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to an authenticated file disclosure vulnerability. A remote and authenticated attacker can read arbitrary system files using the svpn_html/loadfile.php endpoint. This issue is exploitable by a remote and unauthenticated attacker when paired with CVE-2023-30803.

An Information Disclosure vulnerability exists in AvantFAX 3.3.7. Backups of the AvantFAX sent/received faxes, and database backups are stored using the current date as the filename and hosted on the web server without access controls.

File Disclosure in SMF (SimpleMachines Forum) <= 2.0.3: Forum admin can read files such as the database config.

SAP NetWeaver AS JAVA (Enterprise Portal), versions - 7.10, 7.20, 7.30, 7.31, 7.40, 7.50 reveals sensitive information in one of their HTTP requests, an attacker can use this in conjunction with other attacks such as XSS to steal this information.

Acemanager in ALEOS before version 4.16 allows a user with valid credentials to reconfigure the device to expose the ACEManager credentials on the pre-login status page.

CNCF Harbor 2.13.x before 2.13.1 and 2.12.x before 2.12.4 allows information disclosure by administrators who can exploit an ORM Leak present in the /api/v2.0/users endpoint to leak users' password hash and salt values. The q URL parameter allows a user to filter users by any column, and filter password=~ could be abused to leak out a user's password hash character by character. An attacker with administrator access could exploit this to leak highly sensitive information stored in the Harbor database. All endpoints that support the q URL parameter are vulnerable to this ORM leak attack.

Insufficiently Protected Credentials in the AD/LDAP server settings in 1C-Bitrix Bitrix24 through 22.200.200 allow remote administrators to discover an AD/LDAP administrative password by reading the source code of /bitrix/admin/ldap_server_edit.php.

IBM App Connect Enterprise 11.0.0.17 through 11.0.0.19 and 12.0.4.0 and 12.0.5.0 contains an unspecified vulnerability in the Discovery Connector nodes which may cause a 3rd party system’s credentials to be exposed to a privileged attacker. IBM X-Force ID: 238211.

Shopware is an open source eCommerce platform. In versions prior to 6.4.1.1 the admin api has exposed some internal hidden fields when an association has been loaded with a to many reference. Users are recommend to update to version 6.4.1.1. You can get the update to 6.4.1.1 regularly via the Auto-Updater or directly via the download overview. For older versions of 6.1, 6.2, and 6.3, corresponding security measures are also available via a plugin.

An information disclosure vulnerability was discovered in the directory and file management of Avaya Aura Utility Services. This vulnerability may potentially allow any local user to access system functionality and configuration information that should only be available to a privileged user. Affects all 7.x versions of Avaya Aura Utility Services

An information disclosure vulnerability was discovered in the directory and file management of Avaya Aura Appliance Virtualization Platform Utilities (AVPU). This vulnerability may potentially allow any local user to access system functionality and configuration information that should only be available to a privileged user. Affects versions 8.0.0.0 through 8.1.3.1 of AVPU.

An issue has been discovered in GitLab CE/EE affecting all versions starting from 13.9 before 17.0.6, all versions starting from 17.1 before 17.1.4, all versions starting from 17.2 before 17.2.2. Under certain conditions, access tokens may have been logged when an API request was made in a specific manner.

A medium severity vulnerability in BIPS has been identified where an authenticated attacker with high privileges can access the SSH private keys via an information leak in the server response.

Discourse is an open source platform for community discussion. PM titles and metadata can be read by other users when the "PM tags allowed for groups" option is enabled, the other user is a member of a group added to this option, and the PM has been tagged. This issue has been patched in the latest `stable`, `beta` and `tests-passed` versions of Discourse. Users are advised to upgrade. Users unable to upgrade should remove all groups from the the "PM tags allowed for groups" option.

In Splunk Enterprise versions below 9.3.1, 9.2.3, and 9.1.6, the software potentially exposes sensitive HTTP parameters to the `_internal` index. This exposure could happen if you configure the Splunk Enterprise `REST_Calls` log channel at the DEBUG logging level.

In Splunk Enterprise versions below 9.3.1, 9.2.3, and 9.1.6, the software potentially exposes plaintext passwords for local native authentication Splunk users. This exposure could happen when you configure the Splunk Enterprise AdminManager log channel at the DEBUG logging level.

Sensitive information disclosure in some Zoom Workplace Apps, SDKs, Rooms Clients, and Rooms Controllers may allow a privileged user to conduct an information disclosure via network access.

Sensitive information disclosure in some Zoom Workplace Apps, SDKs, Rooms Clients, and Rooms Controllers may allow a privileged user to conduct an information disclosure via network access.

Sensitive information disclosure in some Zoom Workplace Apps, SDKs, Rooms Clients, and Rooms Controllers may allow a privileged user to conduct an information disclosure via network access.