In the Linux kernel, the following vulnerability has been resolved: i3c: Add NULL pointer check in i3c_master_queue_ibi() The I3C master driver may receive an IBI from a target device that has not been probed yet. In such cases, the master calls `i3c_master_queue_ibi()` to queue an IBI work task, leading to "Unable to handle kernel read from unreadable memory" and resulting in a kernel panic. Typical IBI handling flow: 1. The I3C master scans target devices and probes their respective drivers. 2. The target device driver calls `i3c_device_request_ibi()` to enable IBI and assigns `dev->ibi = ibi`. 3. The I3C master receives an IBI from the target device and calls `i3c_master_queue_ibi()` to queue the target device driver’s IBI handler task. However, since target device events are asynchronous to the I3C probe sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`, leading to a kernel panic. Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing an uninitialized `dev->ibi`, ensuring stability.

In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_update Check if policy is NULL before dereferencing it in amd_pstate_update.

In the Linux kernel, the following vulnerability has been resolved: net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. When I ran the repro [0] and waited a few seconds, I observed two LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1] Reproduction Steps: 1) Mount CIFS 2) Add an iptables rule to drop incoming FIN packets for CIFS 3) Unmount CIFS 4) Unload the CIFS module 5) Remove the iptables rule At step 3), the CIFS module calls sock_release() for the underlying TCP socket, and it returns quickly. However, the socket remains in FIN_WAIT_1 because incoming FIN packets are dropped. At this point, the module's refcnt is 0 while the socket is still alive, so the following rmmod command succeeds. # ss -tan State Recv-Q Send-Q Local Address:Port Peer Address:Port FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445 # lsmod | grep cifs cifs 1159168 0 This highlights a discrepancy between the lifetime of the CIFS module and the underlying TCP socket. Even after CIFS calls sock_release() and it returns, the TCP socket does not die immediately in order to close the connection gracefully. While this is generally fine, it causes an issue with LOCKDEP because CIFS assigns a different lock class to the TCP socket's sk->sk_lock using sock_lock_init_class_and_name(). Once an incoming packet is processed for the socket or a timer fires, sk->sk_lock is acquired. Then, LOCKDEP checks the lock context in check_wait_context(), where hlock_class() is called to retrieve the lock class. However, since the module has already been unloaded, hlock_class() logs a warning and returns NULL, triggering the null-ptr-deref. If LOCKDEP is enabled, we must ensure that a module calling sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded while such a socket is still alive to prevent this issue. Let's hold the module reference in sock_lock_init_class_and_name() and release it when the socket is freed in sk_prot_free(). Note that sock_lock_init() clears sk->sk_owner for svc_create_socket() that calls sock_lock_init_class_and_name() for a listening socket, which clones a socket by sk_clone_lock() without GFP_ZERO. [0]: CIFS_SERVER="10.0.0.137" CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST" DEV="enp0s3" CRED="/root/WindowsCredential.txt" MNT=$(mktemp -d /tmp/XXXXXX) mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1 iptables -A INPUT -s ${CIFS_SERVER} -j DROP for i in $(seq 10); do umount ${MNT} rmmod cifs sleep 1 done rm -r ${MNT} iptables -D INPUT -s ${CIFS_SERVER} -j DROP [1]: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) ... Call Trace: <IRQ> __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178) lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ... BUG: kernel NULL pointer dereference, address: 00000000000000c4 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire (kernel/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: Add NULL check for adev Not all devices have an ACPI companion fwnode, so adev might be NULL. This is similar to the commit cd2fd6eab480 ("platform/x86: int3472: Check for adev == NULL"). Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in int3402_thermal_probe(). Note, under the same directory, int3400_thermal_probe() has such a check. [ rjw: Subject edit, added Fixes: ]

In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-chipid: Add NULL pointer check in exynos_chipid_probe() soc_dev_attr->revision could be NULL, thus, a pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: dlm: prevent NPD when writing a positive value to event_done do_uevent returns the value written to event_done. In case it is a positive value, new_lockspace would undo all the work, and lockspace would not be set. __dlm_new_lockspace, however, would treat that positive value as a success due to commit 8511a2728ab8 ("dlm: fix use count with multiple joins"). Down the line, device_create_lockspace would pass that NULL lockspace to dlm_find_lockspace_local, leading to a NULL pointer dereference. Treating such positive values as successes prevents the problem. Given this has been broken for so long, this is unlikely to break userspace expectations.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/hmm: Don't dereference struct page pointers without notifier lock The pnfs that we obtain from hmm_range_fault() point to pages that we don't have a reference on, and the guarantee that they are still in the cpu page-tables is that the notifier lock must be held and the notifier seqno is still valid. So while building the sg table and marking the pages accesses / dirty we need to hold this lock with a validated seqno. However, the lock is reclaim tainted which makes sg_alloc_table_from_pages_segment() unusable, since it internally allocates memory. Instead build the sg-table manually. For the non-iommu case this might lead to fewer coalesces, but if that's a problem it can be fixed up later in the resource cursor code. For the iommu case, the whole sg-table may still be coalesced to a single contigous device va region. This avoids marking pages that we don't own dirty and accessed, and it also avoid dereferencing struct pages that we don't own. v2: - Use assert to check whether hmm pfns are valid (Matthew Auld) - Take into account that large pages may cross range boundaries (Matthew Auld) v3: - Don't unnecessarily check for a non-freed sg-table. (Matthew Auld) - Add a missing up_read() in an error path. (Matthew Auld) (cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)

In the Linux kernel, the following vulnerability has been resolved: USB: hub: Ignore non-compliant devices with too many configs or interfaces Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Clear port select structure when fail to create Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: ptp: Ensure info->enable callback is always set The ioctl and sysfs handlers unconditionally call the ->enable callback. Not all drivers implement that callback, leading to NULL dereferences. Example of affected drivers: ptp_s390.c, ptp_vclock.c and ptp_mock.c. Instead use a dummy callback if no better was specified by the driver.

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before "getting" registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are "supervisor state components" which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn't so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ]

In the Linux kernel, the following vulnerability has been resolved: HID: appleir: Fix potential NULL dereference at raw event handle Syzkaller reports a NULL pointer dereference issue in input_event(). BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: null-ptr-deref in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: null-ptr-deref in is_event_supported drivers/input/input.c:67 [inline] BUG: KASAN: null-ptr-deref in input_event+0x42/0xa0 drivers/input/input.c:395 Read of size 8 at addr 0000000000000028 by task syz-executor199/2949 CPU: 0 UID: 0 PID: 2949 Comm: syz-executor199 Not tainted 6.13.0-rc4-syzkaller-00076-gf097a36ef88d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 kasan_report+0xd9/0x110 mm/kasan/report.c:602 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:68 [inline] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] is_event_supported drivers/input/input.c:67 [inline] input_event+0x42/0xa0 drivers/input/input.c:395 input_report_key include/linux/input.h:439 [inline] key_down drivers/hid/hid-appleir.c:159 [inline] appleir_raw_event+0x3e5/0x5e0 drivers/hid/hid-appleir.c:232 __hid_input_report.constprop.0+0x312/0x440 drivers/hid/hid-core.c:2111 hid_ctrl+0x49f/0x550 drivers/hid/usbhid/hid-core.c:484 __usb_hcd_giveback_urb+0x389/0x6e0 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x396/0x450 drivers/usb/core/hcd.c:1734 dummy_timer+0x17f7/0x3960 drivers/usb/gadget/udc/dummy_hcd.c:1993 __run_hrtimer kernel/time/hrtimer.c:1739 [inline] __hrtimer_run_queues+0x20a/0xae0 kernel/time/hrtimer.c:1803 hrtimer_run_softirq+0x17d/0x350 kernel/time/hrtimer.c:1820 handle_softirqs+0x206/0x8d0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xfa/0x160 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x90/0xb0 arch/x86/kernel/apic/apic.c:1049 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 __mod_timer+0x8f6/0xdc0 kernel/time/timer.c:1185 add_timer+0x62/0x90 kernel/time/timer.c:1295 schedule_timeout+0x11f/0x280 kernel/time/sleep_timeout.c:98 usbhid_wait_io+0x1c7/0x380 drivers/hid/usbhid/hid-core.c:645 usbhid_init_reports+0x19f/0x390 drivers/hid/usbhid/hid-core.c:784 hiddev_ioctl+0x1133/0x15b0 drivers/hid/usbhid/hiddev.c:794 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This happens due to the malformed report items sent by the emulated device which results in a report, that has no fields, being added to the report list. Due to this appleir_input_configured() is never called, hidinput_connect() fails which results in the HID_CLAIMED_INPUT flag is not being set. However, it does not make appleir_probe() fail and lets the event callback to be called without the associated input device. Thus, add a check for the HID_CLAIMED_INPUT flag and leave the event hook early if the driver didn't claim any input_dev for some reason. Moreover, some other hid drivers accessing input_dev in their event callbacks do have similar checks, too. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags PRT BOs may not have any backing store, so bo->tbo.resource will be NULL. Check for that before dereferencing. (cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc)

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in alloc_preauth_hash() The Client send malformed smb2 negotiate request. ksmbd return error response. Subsequently, the client can send smb2 session setup even thought conn->preauth_info is not allocated. This patch add KSMBD_SESS_NEED_SETUP status of connection to ignore session setup request if smb2 negotiate phase is not complete.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: rto_min/max: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.

In the Linux kernel, the following vulnerability has been resolved: mm/migrate: fix shmem xarray update during migration A shmem folio can be either in page cache or in swap cache, but not at the same time. Namely, once it is in swap cache, folio->mapping should be NULL, and the folio is no longer in a shmem mapping. In __folio_migrate_mapping(), to determine the number of xarray entries to update, folio_test_swapbacked() is used, but that conflates shmem in page cache case and shmem in swap cache case. It leads to xarray multi-index entry corruption, since it turns a sibling entry to a normal entry during xas_store() (see [1] for a userspace reproduction). Fix it by only using folio_test_swapcache() to determine whether xarray is storing swap cache entries or not to choose the right number of xarray entries to update. [1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/ Note: In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is used to get swap_cache address space, but that ignores the shmem folio in swap cache case. It could lead to NULL pointer dereferencing when a in-swap-cache shmem folio is split at __xa_store(), since !folio_test_anon() is true and folio->mapping is NULL. But fortunately, its caller split_huge_page_to_list_to_order() bails out early with EBUSY when folio->mapping is NULL. So no need to take care of it here.

In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix NULL pointer dereference on mkdir When a 9p tree was mounted with option 'posixacl', parent directory had a default ACL set for its subdirectories, e.g.: setfacl -m default:group:simpsons:rwx parentdir then creating a subdirectory crashed 9p client, as v9fs_fid_add() call in function v9fs_vfs_mkdir_dotl() sets the passed 'fid' pointer to NULL (since dafbe689736) even though the subsequent v9fs_set_create_acl() call expects a valid non-NULL 'fid' pointer: [ 37.273191] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 37.322338] Call Trace: [ 37.323043] <TASK> [ 37.323621] ? __die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434) [ 37.324448] ? page_fault_oops (arch/x86/mm/fault.c:714) [ 37.325532] ? search_module_extables (kernel/module/main.c:3733) [ 37.326742] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.328006] ? search_bpf_extables (kernel/bpf/core.c:804) [ 37.329142] ? exc_page_fault (./arch/x86/include/asm/paravirt.h:686 arch/x86/mm/fault.c:1488 arch/x86/mm/fault.c:1538) [ 37.330196] ? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:574) [ 37.331330] ? p9_client_walk (net/9p/client.c:1165) 9pnet [ 37.332562] ? v9fs_fid_xattr_get (fs/9p/xattr.c:30) 9p [ 37.333824] v9fs_fid_xattr_set (fs/9p/fid.h:23 fs/9p/xattr.c:121) 9p [ 37.335077] v9fs_set_acl (fs/9p/acl.c:276) 9p [ 37.336112] v9fs_set_create_acl (fs/9p/acl.c:307) 9p [ 37.337326] v9fs_vfs_mkdir_dotl (fs/9p/vfs_inode_dotl.c:411) 9p [ 37.338590] vfs_mkdir (fs/namei.c:4313) [ 37.339535] do_mkdirat (fs/namei.c:4336) [ 37.340465] __x64_sys_mkdir (fs/namei.c:4354) [ 37.341455] do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) [ 37.342447] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Fix this by simply swapping the sequence of these two calls in v9fs_vfs_mkdir_dotl(), i.e. calling v9fs_set_create_acl() before v9fs_fid_add().

In the Linux kernel, the following vulnerability has been resolved: idpf: fix adapter NULL pointer dereference on reboot With SRIOV enabled, idpf ends up calling into idpf_remove() twice. First via idpf_shutdown() and then again when idpf_remove() calls into sriov_disable(), because the VF devices use the idpf driver, hence the same remove routine. When that happens, it is possible for the adapter to be NULL from the first call to idpf_remove(), leading to a NULL pointer dereference. echo 1 > /sys/class/net/<netif>/device/sriov_numvfs reboot BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:idpf_remove+0x22/0x1f0 [idpf] ... ? idpf_remove+0x22/0x1f0 [idpf] ? idpf_remove+0x1e4/0x1f0 [idpf] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19f/0x200 pci_stop_bus_device+0x6d/0x90 pci_stop_and_remove_bus_device+0x12/0x20 pci_iov_remove_virtfn+0xbe/0x120 sriov_disable+0x34/0xe0 idpf_sriov_configure+0x58/0x140 [idpf] idpf_remove+0x1b9/0x1f0 [idpf] idpf_shutdown+0x12/0x30 [idpf] pci_device_shutdown+0x35/0x60 device_shutdown+0x156/0x200 ... Replace the direct idpf_remove() call in idpf_shutdown() with idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform the bulk of the cleanup, such as stopping the init task, freeing IRQs, destroying the vports and freeing the mailbox. This avoids the calls to sriov_disable() in addition to a small netdev cleanup, and destroying workqueues, which don't seem to be required on shutdown.

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer dereference in l3mdev_l3_rcv When delete l3s ipvlan: ip link del link eth0 ipvlan1 type ipvlan mode l3s This may cause a null pointer dereference: Call trace: ip_rcv_finish+0x48/0xd0 ip_rcv+0x5c/0x100 __netif_receive_skb_one_core+0x64/0xb0 __netif_receive_skb+0x20/0x80 process_backlog+0xb4/0x204 napi_poll+0xe8/0x294 net_rx_action+0xd8/0x22c __do_softirq+0x12c/0x354 This is because l3mdev_l3_rcv() visit dev->l3mdev_ops after ipvlan_l3s_unregister() assign the dev->l3mdev_ops to NULL. The process like this: (CPU1) | (CPU2) l3mdev_l3_rcv() | check dev->priv_flags: | master = skb->dev; | | | ipvlan_l3s_unregister() | set dev->priv_flags | dev->l3mdev_ops = NULL; | visit master->l3mdev_ops | To avoid this by do not set dev->l3mdev_ops when unregister l3s ipvlan.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

In the Linux kernel, the following vulnerability has been resolved: regulator: dummy: force synchronous probing Sometimes I get a NULL pointer dereference at boot time in kobject_get() with the following call stack: anatop_regulator_probe() devm_regulator_register() regulator_register() regulator_resolve_supply() kobject_get() By placing some extra BUG_ON() statements I could verify that this is raised because probing of the 'dummy' regulator driver is not completed ('dummy_regulator_rdev' is still NULL). In the JTAG debugger I can see that dummy_regulator_probe() and anatop_regulator_probe() can be run by different kernel threads (kworker/u4:*). I haven't further investigated whether this can be changed or if there are other possibilities to force synchronization between these two probe routines. On the other hand I don't expect much boot time penalty by probing the 'dummy' regulator synchronously.

In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is used.

In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: sched: avoid using current->nsproxy Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: mana: cleanup mana struct after debugfs_remove() When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(), mana_gd_suspend() and mana_gd_resume() are called. If during this mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs pointer does not get reinitialized and ends up pointing to older, cleaned-up dentry. Further in the hibernation path, as part of power_down(), mana_gd_shutdown() is triggered. This call, unaware of the failures in resume, tries to cleanup the already cleaned up mana_port_debugfs value and hits the following bug: [ 191.359296] mana 7870:00:00.0: Shutdown was called [ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 191.360584] #PF: supervisor write access in kernel mode [ 191.361125] #PF: error_code(0x0002) - not-present page [ 191.361727] PGD 1080ea067 P4D 0 [ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI [ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2 [ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024 [ 191.364124] RIP: 0010:down_write+0x19/0x50 [ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d [ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246 [ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000 [ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001 [ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000 [ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020 [ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000 [ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0 [ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 191.372906] Call Trace: [ 191.373262] <TASK> [ 191.373621] ? show_regs+0x64/0x70 [ 191.374040] ? __die+0x24/0x70 [ 191.374468] ? page_fault_oops+0x290/0x5b0 [ 191.374875] ? do_user_addr_fault+0x448/0x800 [ 191.375357] ? exc_page_fault+0x7a/0x160 [ 191.375971] ? asm_exc_page_fault+0x27/0x30 [ 191.376416] ? down_write+0x19/0x50 [ 191.376832] ? down_write+0x12/0x50 [ 191.377232] simple_recursive_removal+0x4a/0x2a0 [ 191.377679] ? __pfx_remove_one+0x10/0x10 [ 191.378088] debugfs_remove+0x44/0x70 [ 191.378530] mana_detach+0x17c/0x4f0 [ 191.378950] ? __flush_work+0x1e2/0x3b0 [ 191.379362] ? __cond_resched+0x1a/0x50 [ 191.379787] mana_remove+0xf2/0x1a0 [ 191.380193] mana_gd_shutdown+0x3b/0x70 [ 191.380642] pci_device_shutdown+0x3a/0x80 [ 191.381063] device_shutdown+0x13e/0x230 [ 191.381480] kernel_power_off+0x35/0x80 [ 191.381890] hibernate+0x3c6/0x470 [ 191.382312] state_store+0xcb/0xd0 [ 191.382734] kobj_attr_store+0x12/0x30 [ 191.383211] sysfs_kf_write+0x3e/0x50 [ 191.383640] kernfs_fop_write_iter+0x140/0x1d0 [ 191.384106] vfs_write+0x271/0x440 [ 191.384521] ksys_write+0x72/0xf0 [ 191.384924] __x64_sys_write+0x19/0x20 [ 191.385313] x64_sys_call+0x2b0/0x20b0 [ 191.385736] do_syscall_64+0x79/0x150 [ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240 [ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0 [ 191.387124] ? __pfx_lru_add+0x10/0x10 [ 191.387515] ? queued_spin_unlock+0x9/0x10 [ 191.387937] ? do_anonymous_page+0x33c/0xa00 [ 191.388374] ? __handle_mm_fault+0xcf3/0x1210 [ 191.388805] ? __count_memcg_events+0xbe/0x180 [ 191.389235] ? handle_mm_fault+0xae/0x300 [ 19 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: always recalculate features after XDP clearing, fix null-deref Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") accidentally almost exposed hw counters to non-init net namespaces. It didn't expose them fully, as an attempt to read any of those counters leads to a crash like this one: [42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028 [42021.814463] #PF: supervisor read access in kernel mode [42021.819549] #PF: error_code(0x0000) - not-present page [42021.824636] PGD 0 P4D 0 [42021.827145] Oops: 0000 [#1] SMP PTI [42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX [42021.841697] Hardware name: XXX [42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core] [42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48 [42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287 [42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000 [42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0 [42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000 [42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530 [42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000 [42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000 [42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0 [42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42021.949324] Call Trace: [42021.951756] <TASK> [42021.953842] [<ffffffff86c58674>] ? show_regs+0x64/0x70 [42021.959030] [<ffffffff86c58468>] ? __die+0x78/0xc0 [42021.963874] [<ffffffff86c9ef75>] ? page_fault_oops+0x2b5/0x3b0 [42021.969749] [<ffffffff87674b92>] ? exc_page_fault+0x1a2/0x3c0 [42021.975549] [<ffffffff87801326>] ? asm_exc_page_fault+0x26/0x30 [42021.981517] [<ffffffffc0775680>] ? __pfx_show_hw_stats+0x10/0x10 [ib_core] [42021.988482] [<ffffffffc077564e>] ? hw_stat_device_show+0x1e/0x40 [ib_core] [42021.995438] [<ffffffff86ac7f8e>] dev_attr_show+0x1e/0x50 [42022.000803] [<ffffffff86a3eeb1>] sysfs_kf_seq_show+0x81/0xe0 [42022.006508] [<ffffffff86a11134>] seq_read_iter+0xf4/0x410 [42022.011954] [<ffffffff869f4b2e>] vfs_read+0x16e/0x2f0 [42022.017058] [<ffffffff869f50ee>] ksys_read+0x6e/0xe0 [42022.022073] [<ffffffff8766f1ca>] do_syscall_64+0x6a/0xa0 [42022.027441] [<ffffffff8780013b>] entry_SYSCALL_64_after_hwframe+0x78/0xe2 The problem can be reproduced using the following steps: ip netns add foo ip netns exec foo bash cat /sys/class/infiniband/mlx4_0/hw_counters/* The panic occurs because of casting the device pointer into an ib_device pointer using container_of() in hw_stat_device_show() is wrong and leads to a memory corruption. However the real problem is that hw counters should never been exposed outside of the non-init net namespace. Fix this by saving the index of the corresponding attribute group (it might be 1 or 2 depending on the presence of driver-specific attributes) and zeroing the pointer to hw_counters group for compat devices during the initialization. With this fix applied hw_counters are not available in a non-init net namespace: find /sys/class/infiniband/mlx4_0/ -name hw_counters /sys/class/infiniband/mlx4_0/ports/1/hw_counters /sys/class/infiniband/mlx4_0/ports/2/hw_counters /sys/class/infiniband/mlx4_0/hw_counters ip netns add foo ip netns exec foo bash find /sys/class/infiniband/mlx4_0/ -name hw_counters

In the Linux kernel, the following vulnerability has been resolved: arm64: Don't call NULL in do_compat_alignment_fixup() do_alignment_t32_to_handler() only fixes up alignment faults for specific instructions; it returns NULL otherwise (e.g. LDREX). When that's the case, signal to the caller that it needs to proceed with the regular alignment fault handling (i.e. SIGBUS). Without this patch, the kernel panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000006 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000800164aa000 [0000000000000000] pgd=0800081fdbd22003, p4d=0800081fdbd22003, pud=08000815d51c6003, pmd=0000000000000000 Internal error: Oops: 0000000086000006 [#1] SMP Modules linked in: cfg80211 rfkill xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat br_netfilter veth nvme_fa> libcrc32c crc32c_generic raid0 multipath linear dm_mod dax raid1 md_mod xhci_pci nvme xhci_hcd nvme_core t10_pi usbcore igb crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_ce crct10dif_common usb_common i2c_algo_bit i2c> CPU: 2 PID: 3932954 Comm: WPEWebProcess Not tainted 6.1.0-31-arm64 #1 Debian 6.1.128-1 Hardware name: GIGABYTE MP32-AR1-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : do_compat_alignment_fixup+0xd8/0x3dc sp : ffff80000f973dd0 x29: ffff80000f973dd0 x28: ffff081b42526180 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000001 x20: 00000000e8551f00 x19: ffff80000f973eb0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffaebc949bc488 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000400000 x4 : 0000fffffffffffe x3 : 0000000000000000 x2 : ffff80000f973eb0 x1 : 00000000e8551f00 x0 : 0000000000000001 Call trace: 0x0 do_alignment_fault+0x40/0x50 do_mem_abort+0x4c/0xa0 el0_da+0x48/0xf0 el0t_32_sync_handler+0x110/0x140 el0t_32_sync+0x190/0x194 Code: bad PC value ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid NULL pointer dereference if no valid extent tree [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ #206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6386ff ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547513ff ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport.

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: sched: address a potential NULL pointer dereference in the GRED scheduler. If kzalloc in gred_init returns a NULL pointer, the code follows the error handling path, invoking gred_destroy. This, in turn, calls gred_offload, where memset could receive a NULL pointer as input, potentially leading to a kernel crash. When table->opt is NULL in gred_init(), gred_change_table_def() is not called yet, so it is not necessary to call ->ndo_setup_tc() in gred_offload().

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix error code in chan_alloc_skb_cb() The chan_alloc_skb_cb() function is supposed to return error pointers on error. Returning NULL will lead to a NULL dereference.

In the Linux kernel, the following vulnerability has been resolved: netlabel: Fix NULL pointer exception caused by CALIPSO on IPv4 sockets When calling netlbl_conn_setattr(), addr->sa_family is used to determine the function behavior. If sk is an IPv4 socket, but the connect function is called with an IPv6 address, the function calipso_sock_setattr() is triggered. Inside this function, the following code is executed: sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL; Since sk is an IPv4 socket, pinet6 is NULL, leading to a null pointer dereference. This patch fixes the issue by checking if inet6_sk(sk) returns a NULL pointer before accessing pinet6.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180

In the Linux kernel, the following vulnerability has been resolved: vsock: prevent null-ptr-deref in vsock_*[has_data|has_space] Recent reports have shown how we sometimes call vsock_*_has_data() when a vsock socket has been de-assigned from a transport (see attached links), but we shouldn't. Previous commits should have solved the real problems, but we may have more in the future, so to avoid null-ptr-deref, we can return 0 (no space, no data available) but with a warning. This way the code should continue to run in a nearly consistent state and have a warning that allows us to debug future problems.

In the Linux kernel, the following vulnerability has been resolved: can: ctucanfd: handle skb allocation failure If skb allocation fails, the pointer to struct can_frame is NULL. This is actually handled everywhere inside ctucan_err_interrupt() except for the only place. Add the missed NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw devm_kasprintf() calls can return null pointers on failure. But the return values were not checked in npcm8xx_gpio_fw(). Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().

In the Linux kernel, the following vulnerability has been resolved: rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The per-netns structure can be obtained from the table->data using container_of(), then the 'net' one can be retrieved from the listen socket (if available).

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: handle errors in mlx5_chains_create_table() In mlx5_chains_create_table(), the return value of mlx5_get_fdb_sub_ns() and mlx5_get_flow_namespace() must be checked to prevent NULL pointer dereferences. If either function fails, the function should log error message with mlx5_core_warn() and return error pointer.

In the Linux kernel, the following vulnerability has been resolved: smb: client: Add check for next_buffer in receive_encrypted_standard() Add check for the return value of cifs_buf_get() and cifs_small_buf_get() in receive_encrypted_standard() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: arcnet: Add NULL check in com20020pci_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, com20020pci_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue and ensure no resources are left allocated.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier

In the Linux kernel, the following vulnerability has been resolved: staging: gpib: Fix Oops after disconnect in ni_usb If the usb dongle is disconnected subsequent calls to the driver cause a NULL dereference Oops as the bus_interface is set to NULL on disconnect. This problem was introduced by setting usb_dev from the bus_interface for dev_xxx messages. Previously bus_interface was checked for NULL only in the the functions directly calling usb_fill_bulk_urb or usb_control_msg. Check for valid bus_interface on all interface entry points and return -ENODEV if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: vsock/bpf: return early if transport is not assigned Some of the core functions can only be called if the transport has been assigned. As Michal reported, a socket might have the transport at NULL, for example after a failed connect(), causing the following trace: BUG: kernel NULL pointer dereference, address: 00000000000000a0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+ RIP: 0010:vsock_connectible_has_data+0x1f/0x40 Call Trace: vsock_bpf_recvmsg+0xca/0x5e0 sock_recvmsg+0xb9/0xc0 __sys_recvfrom+0xb3/0x130 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e So we need to check the `vsk->transport` in vsock_bpf_recvmsg(), especially for connected sockets (stream/seqpacket) as we already do in __vsock_connectible_recvmsg().

In the Linux kernel, the following vulnerability has been resolved: gpiolib: Fix crash on error in gpiochip_get_ngpios() The gpiochip_get_ngpios() uses chip_*() macros to print messages. However these macros rely on gpiodev to be initialised and set, which is not the case when called via bgpio_init(). In such a case the printing messages will crash on NULL pointer dereference. Replace chip_*() macros by the respective dev_*() ones to avoid such crash.

In the Linux kernel, the following vulnerability has been resolved: driver core: class: Fix wild pointer dereferences in API class_dev_iter_next() There are a potential wild pointer dereferences issue regarding APIs class_dev_iter_(init|next|exit)(), as explained by below typical usage: // All members of @iter are wild pointers. struct class_dev_iter iter; // class_dev_iter_init(@iter, @class, ...) checks parameter @class for // potential class_to_subsys() error, and it returns void type and does // not initialize its output parameter @iter, so caller can not detect // the error and continues to invoke class_dev_iter_next(@iter) even if // @iter still contains wild pointers. class_dev_iter_init(&iter, ...); // Dereference these wild pointers in @iter here once suffer the error. while (dev = class_dev_iter_next(&iter)) { ... }; // Also dereference these wild pointers here. class_dev_iter_exit(&iter); Actually, all callers of these APIs have such usage pattern in kernel tree. Fix by: - Initialize output parameter @iter by memset() in class_dev_iter_init() and give callers prompt by pr_crit() for the error. - Check if @iter is valid in class_dev_iter_next().