In the Linux kernel, the following vulnerability has been resolved: ASoC: tlv320adcx140: fix null pointer The "snd_soc_component" in "adcx140_priv" was only used once but never set. It was only used for reaching "dev" which is already present in "adcx140_priv".

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy syzbot reported a crash in tc_act_in_hw() during netns teardown where tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action pointer, leading to an invalid dereference. Guard against ERR_PTR entries when iterating the action IDR so teardown does not call tc_act_in_hw() on an error pointer.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dp: Only trigger DRM HPD events if bridge is attached The MediaTek DisplayPort interface bridge driver starts its interrupts as soon as its probed. However when the interrupts trigger the bridge might not have been attached to a DRM device. As drm_helper_hpd_irq_event() does not check whether the passed in drm_device is valid or not, a NULL pointer passed in results in a kernel NULL pointer dereference in it. Check whether the bridge is attached and only trigger an HPD event if it is.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: classmate-laptop: Add missing NULL pointer checks In a few places in the Classmate laptop driver, code using the accel object may run before that object's address is stored in the driver data of the input device using it. For example, cmpc_accel_sensitivity_store_v4() is the "show" method of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(), before calling dev_set_drvdata() for inputdev->dev. If the sysfs attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev) call in in cmpc_accel_sensitivity_store_v4() returns NULL which leads to a NULL pointer dereference going forward. Moreover, sysfs attributes using the input device are added before initializing that device by cmpc_add_acpi_notify_device() and if one of them is accessed before running that function, a NULL pointer dereference will occur. For example, cmpc_accel_sensitivity_attr_v4 is added before calling cmpc_add_acpi_notify_device() and if it is read prematurely, the dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4() returns NULL which leads to a NULL pointer dereference going forward. Fix this by adding NULL pointer checks in all of the relevant places.

In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix workqueue crash in cma_netevent_work_handler struct rdma_cm_id has member "struct work_struct net_work" that is reused for enqueuing cma_netevent_work_handler()s onto cma_wq. Below crash[1] can occur if more than one call to cma_netevent_callback() occurs in quick succession, which further enqueues cma_netevent_work_handler()s for the same rdma_cm_id, overwriting any previously queued work-item(s) that was just scheduled to run i.e. there is no guarantee the queued work item may run between two successive calls to cma_netevent_callback() and the 2nd INIT_WORK would overwrite the 1st work item (for the same rdma_cm_id), despite grabbing id_table_lock during enqueue. Also drgn analysis [2] indicates the work item was likely overwritten. Fix this by moving the INIT_WORK() to __rdma_create_id(), so that it doesn't race with any existing queue_work() or its worker thread. [1] Trimmed crash stack: ============================================= BUG: kernel NULL pointer dereference, address: 0000000000000008 kworker/u256:6 ... 6.12.0-0... Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm) RIP: 0010:process_one_work+0xba/0x31a Call Trace: worker_thread+0x266/0x3a0 kthread+0xcf/0x100 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 ============================================= [2] drgn crash analysis: >>> trace = prog.crashed_thread().stack_trace() >>> trace (0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15) (1) __crash_kexec (kernel/crash_core.c:122:4) (2) panic (kernel/panic.c:399:3) (3) oops_end (arch/x86/kernel/dumpstack.c:382:3) ... (8) process_one_work (kernel/workqueue.c:3168:2) (9) process_scheduled_works (kernel/workqueue.c:3310:3) (10) worker_thread (kernel/workqueue.c:3391:4) (11) kthread (kernel/kthread.c:389:9) Line workqueue.c:3168 for this kernel version is in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); >>> trace[8]["work"] *(struct work_struct *)0xffff92577d0a21d8 = { .data = (atomic_long_t){ .counter = (s64)536870912, <=== Note }, .entry = (struct list_head){ .next = (struct list_head *)0xffff924d075924c0, .prev = (struct list_head *)0xffff924d075924c0, }, .func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280, } Suspicion is that pwq is NULL: >>> trace[8]["pwq"] (struct pool_workqueue *)<absent> In process_one_work(), pwq is assigned from: struct pool_workqueue *pwq = get_work_pwq(work); and get_work_pwq() is: static struct pool_workqueue *get_work_pwq(struct work_struct *work) { unsigned long data = atomic_long_read(&work->data); if (data & WORK_STRUCT_PWQ) return work_struct_pwq(data); else return NULL; } WORK_STRUCT_PWQ is 0x4: >>> print(repr(prog['WORK_STRUCT_PWQ'])) Object(prog, 'enum work_flags', value=4) But work->data is 536870912 which is 0x20000000. So, get_work_pwq() returns NULL and we crash in process_one_work(): 3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN); =============================================

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch, Fix an Oops in error handling code The error handling dereferences "vport". There is nothing we can do if it is an error pointer except returning the error code.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix possible null-ptr-deref when assigning a stream While AudioDSP drivers assign streams exclusively of HOST or LINK type, nothing blocks a user to attempt to assign a COUPLED stream. As supplied substream instance may be a stub, what is the case when code-loading, such scenario ends with null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: HID: pidff: Fix condition effect bit clearing As reported by MPDarkGuy on discord, NULL pointer dereferences were happening because not all the conditional effects bits were cleared. Properly clear all conditional effect bits from ffbit

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read() If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on lpfc_read_object()'s routine to NULL check pdata. Currently, an early return error is thrown from lpfc_read_object() to protect us from NULL ptr dereference, but the errno code is -ENODEV. Change the errno code to a more appropriate -ENOMEM.

In the Linux kernel, the following vulnerability has been resolved: i2c: imx: preserve error state in block data length handler When a block read returns an invalid length, zero or >I2C_SMBUS_BLOCK_MAX, the length handler sets the state to IMX_I2C_STATE_FAILED. However, i2c_imx_master_isr() unconditionally overwrites this with IMX_I2C_STATE_READ_CONTINUE, causing an endless read loop that overruns buffers and crashes the system. Guard the state transition to preserve error states set by the length handler.

In the Linux kernel, the following vulnerability has been resolved: tty: vcc: Add check for kstrdup() in vcc_probe() Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: dm stats: check for and propagate alloc_percpu failure Check alloc_precpu()'s return value and return an error from dm_stats_init() if it fails. Update alloc_dev() to fail if dm_stats_init() does. Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup() even if dm-stats isn't being actively used.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix KMS with 3D on HW version 10 HW version 10 does not have GB Surfaces so there is no backing buffer for surface backed FBs. This would result in a nullptr dereference and crash the driver causing a black screen.

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devices The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [akpm@linux-foundation.org: add unlikely()]

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix null pointer deref when receiving skb during sock creation The panic below is observed when receiving ICMP packets with secmark set while an ICMP raw socket is being created. SK_CTX(sk)->label is updated in apparmor_socket_post_create(), but the packet is delivered to the socket before that, causing the null pointer dereference. Drop the packet if label context is not set. BUG: kernel NULL pointer dereference, address: 000000000000004c #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 407 Comm: a.out Not tainted 6.4.12-arch1-1 #1 3e6fa2753a2d75925c34ecb78e22e85a65d083df Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/28/2020 RIP: 0010:aa_label_next_confined+0xb/0x40 Code: 00 00 48 89 ef e8 d5 25 0c 00 e9 66 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 89 f0 <8b> 77 4c 39 c6 7e 1f 48 63 d0 48 8d 14 d7 eb 0b 83 c0 01 48 83 c2 RSP: 0018:ffffa92940003b08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000e RDX: ffffa92940003be8 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8b57471e7800 R08: ffff8b574c642400 R09: 0000000000000002 R10: ffffffffbd820eeb R11: ffffffffbeb7ff00 R12: ffff8b574c642400 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000 FS: 00007fb092ea7640(0000) GS:ffff8b577bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004c CR3: 00000001020f2005 CR4: 00000000007706f0 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? aa_label_next_confined+0xb/0x40 apparmor_secmark_check+0xec/0x330 security_sock_rcv_skb+0x35/0x50 sk_filter_trim_cap+0x47/0x250 sock_queue_rcv_skb_reason+0x20/0x60 raw_rcv+0x13c/0x210 raw_local_deliver+0x1f3/0x250 ip_protocol_deliver_rcu+0x4f/0x2f0 ip_local_deliver_finish+0x76/0xa0 __netif_receive_skb_one_core+0x89/0xa0 netif_receive_skb+0x119/0x170 ? __netdev_alloc_skb+0x3d/0x140 vmxnet3_rq_rx_complete+0xb23/0x1010 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3 56a84f9c97178c57a43a24ec073b45a9d6f01f3a] __napi_poll+0x28/0x1b0 net_rx_action+0x2a4/0x380 __do_softirq+0xd1/0x2c8 __irq_exit_rcu+0xbb/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x26/0x40 RIP: 0010:apparmor_socket_post_create+0xb/0x200 Code: 08 48 85 ff 75 a1 eb b1 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 <55> 48 89 fd 53 45 85 c0 0f 84 b2 00 00 00 48 8b 1d 80 56 3f 02 48 RSP: 0018:ffffa92940ce7e50 EFLAGS: 00000286 RAX: ffffffffbc756440 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff8b574eaab740 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8b57444cec70 R11: 0000000000000000 R12: 0000000000000003 R13: 0000000000000002 R14: ffff8b574eaab740 R15: ffffffffbd8e4748 ? __pfx_apparmor_socket_post_create+0x10/0x10 security_socket_post_create+0x4b/0x80 __sock_create+0x176/0x1f0 __sys_socket+0x89/0x100 __x64_sys_socket+0x17/0x20 do_syscall_64+0x5d/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_as ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68

In the Linux kernel, the following vulnerability has been resolved: HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer Add DMA buffer readiness check before reading DMA buffer to avoid unexpected NULL pointer accessing.

In the Linux kernel, the following vulnerability has been resolved: drm/client: Do not destroy NULL modes 'modes' in drm_client_modeset_probe may fail to kcalloc. If this occurs, we jump to 'out', calling modes_destroy on it, which dereferences it. This may result in a NULL pointer dereference in the error case. Prevent that.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix crash during turbo disable When the system is booted with kernel command line argument "nosmt" or "maxcpus" to limit the number of CPUs, disabling turbo via: echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo results in a crash: PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI ... RIP: 0010:store_no_turbo+0x100/0x1f0 ... This occurs because for_each_possible_cpu() returns CPUs even if they are not online. For those CPUs, all_cpu_data[] will be NULL. Since commit 973207ae3d7c ("cpufreq: intel_pstate: Rearrange max frequency updates handling code"), all_cpu_data[] is dereferenced even for CPUs which are not online, causing the NULL pointer dereference. To fix that, pass CPU number to intel_pstate_update_max_freq() and use all_cpu_data[] for those CPUs for which there is a valid cpufreq policy.

In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers.

In the Linux kernel, the following vulnerability has been resolved: libceph: make free_choose_arg_map() resilient to partial allocation free_choose_arg_map() may dereference a NULL pointer if its caller fails after a partial allocation. For example, in decode_choose_args(), if allocation of arg_map->args fails, execution jumps to the fail label and free_choose_arg_map() is called. Since arg_map->size is updated to a non-zero value before memory allocation, free_choose_arg_map() will iterate over arg_map->args and dereference a NULL pointer. To prevent this potential NULL pointer dereference and make free_choose_arg_map() more resilient, add checks for pointers before iterating.

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening.

In the Linux kernel, the following vulnerability has been resolved: lib/buildid: use __kernel_read() for sleepable context Prevent a "BUG: unable to handle kernel NULL pointer dereference in filemap_read_folio". For the sleepable context, convert freader to use __kernel_read() instead of direct page cache access via read_cache_folio(). This simplifies the faultable code path by using the standard kernel file reading interface which handles all the complexity of reading file data. At the moment we are not changing the code for non-sleepable context which uses filemap_get_folio() and only succeeds if the target folios are already in memory and up-to-date. The reason is to keep the patch simple and easier to backport to stable kernels. Syzbot repro does not crash the kernel anymore and the selftests run successfully. In the follow up we will make __kernel_read() with IOCB_NOWAIT work for non-sleepable contexts. In addition, I would like to replace the secretmem check with a more generic approach and will add fstest for the buildid code.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate session id and tree id in the compound request This patch validate session id and tree id in compound request. If first operation in the compound is SMB2 ECHO request, ksmbd bypass session and tree validation. So work->sess and work->tcon could be NULL. If secound request in the compound access work->sess or tcon, It cause NULL pointer dereferecing error.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

In the Linux kernel, the following vulnerability has been resolved: gpio: loongson-64bit: Fix incorrect NULL check after devm_kcalloc() Fix incorrect NULL check in loongson_gpio_init_irqchip(). The function checks chip->parent instead of chip->irq.parents.

In the Linux kernel, the following vulnerability has been resolved: ice: add missing ice_deinit_hw() in devlink reinit path devlink-reload results in ice_init_hw failed error, and then removing the ice driver causes a NULL pointer dereference. [ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16 ... [ +0.000001] Call Trace: [ +0.000003] <TASK> [ +0.000006] ice_unload+0x8f/0x100 [ice] [ +0.000081] ice_remove+0xba/0x300 [ice] Commit 1390b8b3d2be ("ice: remove duplicate call to ice_deinit_hw() on error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but ice_devlink_reinit_up() still calls ice_init_hw(). Since the control queues are not uninitialized, ice_init_hw() fails with -EBUSY. Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with ice_init_hw() in ice_devlink_reinit_up().

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset `qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class itself is active. Two qfq_class objects may point to the same leaf_qdisc. This happens when: 1. one QFQ qdisc is attached to the dev as the root qdisc, and 2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get() / qdisc_put()) and is pending to be destroyed, as in function tc_new_tfilter. When packets are enqueued through the root QFQ qdisc, the shared leaf_qdisc->q.qlen increases. At the same time, the second QFQ qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters qfq_reset() with its own q->q.qlen == 0, but its class's leaf qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate an inactive aggregate and trigger a null-deref in qfq_deactivate_agg: [ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 0.903571] #PF: supervisor write access in kernel mode [ 0.903860] #PF: error_code(0x0002) - not-present page [ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0 [ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI [ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE [ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.910247] PKRU: 55555554 [ 0.910391] Call Trace: [ 0.910527] <TASK> [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485) [ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036) [ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076) [ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447) [ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) [ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861) [ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550) [ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) [ 0.912296] ? __alloc_skb (net/core/skbuff.c:706) [ 0.912484] netlink_sendmsg (net/netlink/af ---truncated---

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix NULL pointer dereference of mgmt_chann mgmt_chann may be set to NULL if the firmware returns an unexpected error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL pointer dereference in aie2_hw_stop(). Fix this by introducing a dedicated helper to destroy mgmt_chann and by adding proper NULL checks before accessing it.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix previous acpi_processor_errata_piix4() fix After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()"), device pointers may be dereferenced after dropping references to the device objects pointed to by them, which may cause a use-after-free to occur. Moreover, debug messages about enabling the errata may be printed if the errata flags corresponding to them are unset. Address all of these issues by moving message printing to the points in the code where the errata flags are set.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89 <4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202 <4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010 <4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000 <4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000 <4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000 <4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000 <4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0 <4>[ 231.451629] PKRU: 55555554 <4>[ 231.452076] Call Trace: <4>[ 231.452549] <TASK> <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice] <4>[ 231.453482] ice_resume+0xfd/0x220 [ice] <4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.454425] pci_pm_resume+0x8c/0x140 <4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.455347] dpm_run_callback+0x5f/0x160 <4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170 <4>[ 231.456244] device_resume+0x177/0x270 <4>[ 231.456708] dpm_resume+0x209/0x2f0 <4>[ 231.457151] dpm_resume_end+0x15/0x30 <4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0 <4>[ 231.458054] enter_state+0x10e/0x570 Add defensive checks for both the ring pointer and its q_vector before dereferencing, allowing the system to resume successfully even when q_vectors are unmapped.

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than the minimum expected length, crypto_authenc_esn_decrypt() can advance past the end of the destination scatterlist and trigger a NULL pointer dereference in scatterwalk_map_and_copy(), leading to a kernel panic (DoS). Add a minimum AAD length check to fail fast on invalid inputs.

A flaw was found in the Linux kernel’s IP framework for transforming packets (XFRM subsystem). This issue may allow a malicious user with CAP_NET_ADMIN privileges to directly dereference a NULL pointer in xfrm_update_ae_params(), leading to a possible kernel crash and denial of service.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix crash on profile change rollback failure mlx5e_netdev_change_profile can fail to attach a new profile and can fail to rollback to old profile, in such case, we could end up with a dangling netdev with a fully reset netdev_priv. A retry to change profile, e.g. another attempt to call mlx5e_netdev_change_profile via switchdev mode change, will crash trying to access the now NULL priv->mdev. This fix allows mlx5e_netdev_change_profile() to handle previous failures and an empty priv, by not assuming priv is valid. Pass netdev and mdev to all flows requiring mlx5e_netdev_change_profile() and avoid passing priv. In mlx5e_netdev_change_profile() check if current priv is valid, and if not, just attach the new profile without trying to access the old one. This fixes the following oops, when enabling switchdev mode for the 2nd time after first time failure: ## Enabling switchdev mode first time: mlx5_core 0012:03:00.1: E-Switch: Supported tc chains and prios offload workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 ^^^^^^^^ mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) ## retry: Enabling switchdev mode 2nd time: mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload BUG: kernel NULL pointer dereference, address: 0000000000000038 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 520 Comm: devlink Not tainted 6.18.0-rc4+ #91 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_detach_netdev+0x3c/0x90 Code: 50 00 00 f0 80 4f 78 02 48 8b bf e8 07 00 00 48 85 ff 74 16 48 8b 73 78 48 d1 ee 83 e6 01 83 f6 01 40 0f b6 f6 e8 c4 42 00 00 <48> 8b 45 38 48 85 c0 74 08 48 89 df e8 cc 47 40 1e 48 8b bb f0 07 RSP: 0018:ffffc90000673890 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8881036a89c0 RCX: 0000000000000000 RDX: ffff888113f63800 RSI: ffffffff822fe720 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000002dcd R09: 0000000000000000 R10: ffffc900006738e8 R11: 00000000ffffffff R12: 0000000000000000 R13: 0000000000000000 R14: ffff8881036a89c0 R15: 0000000000000000 FS: 00007fdfb8384740(0000) GS:ffff88856a9d6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 0000000112ae0005 CR4: 0000000000370ef0 Call Trace: <TASK> mlx5e_netdev_change_profile+0x45/0xb0 mlx5e_vport_rep_load+0x27b/0x2d0 mlx5_esw_offloads_rep_load+0x72/0xf0 esw_offloads_enable+0x5d0/0x970 mlx5_eswitch_enable_locked+0x349/0x430 ? is_mp_supported+0x57/0xb0 mlx5_devlink_eswitch_mode_set+0x26b/0x430 devlink_nl_eswitch_set_doit+0x6f/0xf0 genl_family_rcv_msg_doit+0xe8/0x140 genl_rcv_msg+0x18b/0x290 ? __pfx_devlink_nl_pre_doit+0x10/0x10 ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10 ? __pfx_devlink_nl_post_doit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x52/0x100 genl_rcv+0x28/0x40 netlink_unicast+0x282/0x3e0 ? __alloc_skb+0xd6/0x190 netlink_sendmsg+0x1f7/0x430 __sys_sendto+0x213/0x220 ? __sys_recvmsg+0x6a/0xd0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fdfb8495047

In the Linux kernel, the following vulnerability has been resolved: libceph: return the handler error from mon_handle_auth_done() Currently any error from ceph_auth_handle_reply_done() is propagated via finish_auth() but isn't returned from mon_handle_auth_done(). This results in higher layers learning that (despite the monitor considering us to be successfully authenticated) something went wrong in the authentication phase and reacting accordingly, but msgr2 still trying to proceed with establishing the session in the background. In the case of secure mode this can trigger a WARN in setup_crypto() and later lead to a NULL pointer dereference inside of prepare_auth_signature().

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() cpufreq_cpu_get_raw() may return NULL if the cpu is not in policy->cpus cpu mask and it will cause null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix crash when destroying a suspended hardware context If userspace issues an ioctl to destroy a hardware context that has already been automatically suspended, the driver may crash because the mailbox channel pointer is NULL for the suspended context. Fix this by checking the mailbox channel pointer in aie2_destroy_context() before accessing it.

In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock" This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1. Under rare circumstances, multiple udev threads can collect i801 device info on boot and walk i801_acpi_io_handler somewhat concurrently. The first will note the area is reserved by acpi to prevent further touches. This ultimately causes the area to be deregistered. The second will enter i801_acpi_io_handler after the area is unregistered but before a check can be made that the area is unregistered. i2c_lock_bus relies on the now unregistered area containing lock_ops to lock the bus. The end result is a kernel panic on boot with the following backtrace; [ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102) [ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 14.971880] #PF: supervisor read access in kernel mode [ 14.971884] #PF: error_code(0x0000) - not-present page [ 14.971887] PGD 0 P4D 0 [ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI [ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1 [ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023 [ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b [ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282 [ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568 [ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000 [ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028 [ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580 [ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000 [ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000 [ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0 [ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 14.971972] Call Trace: [ 14.971977] <TASK> [ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df [ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df [ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972014] ? __die_body.cold+0x8/0xd [ 14.972021] ? page_fault_oops+0x132/0x170 [ 14.972028] ? exc_page_fault+0x61/0x150 [ 14.972036] ? asm_exc_page_fault+0x22/0x30 [ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801] [ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0 [ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801] [ 14.972085] acpi_ex_access_region+0x5b/0xd0 [ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0 [ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230 [ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310 [ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110 [ 14.972121] acpi_ds_exec_end_op+0x321/0x510 [ 14.972127] acpi_ps_parse_loop+0xf7/0x680 [ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0 [ 14.972143] acpi_ps_execute_method+0x137/0x270 [ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0 [ 14.972158] acpi_evaluate_object+0x134/0x2f0 [ 14.972164] acpi_evaluate_integer+0x50/0xe0 [ 14.972173] ? vsnprintf+0x24b/0x570 [ 14.972181] acpi_ac_get_state.part.0+0x23/0x70 [ 14.972189] get_ac_property+0x4e/0x60 [ 14.972195] power_supply_show_property+0x90/0x1f0 [ 14.972205] add_prop_uevent+0x29/0x90 [ 14.972213] power_supply_uevent+0x109/0x1d0 [ 14.972222] dev_uevent+0x10e/0x2f0 [ 14.972228] uevent_show+0x8e/0x100 [ 14.972236] dev_attr_show+0x19 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL deref in mesh_matches_local() mesh_matches_local() unconditionally dereferences ie->mesh_config to compare mesh configuration parameters. When called from mesh_rx_csa_frame(), the parsed action-frame elements may not contain a Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a kernel NULL pointer dereference. The other two callers are already safe: - ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before calling mesh_matches_local() - mesh_plink_get_event() is only reached through mesh_process_plink_frame(), which checks !elems->mesh_config, too mesh_rx_csa_frame() is the only caller that passes raw parsed elements to mesh_matches_local() without guarding mesh_config. An adjacent attacker can exploit this by sending a crafted CSA action frame that includes a valid Mesh ID IE but omits the Mesh Configuration IE, crashing the kernel. The captured crash log: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events_unbound cfg80211_wiphy_work [...] Call Trace: <TASK> ? __pfx_mesh_matches_local (net/mac80211/mesh.c:65) ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686) [...] ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802) [...] cfg80211_wiphy_work (net/wireless/core.c:426) process_one_work (net/kernel/workqueue.c:3280) ? assign_work (net/kernel/workqueue.c:1219) worker_thread (net/kernel/workqueue.c:3352) ? __pfx_worker_thread (net/kernel/workqueue.c:3385) kthread (net/kernel/kthread.c:436) [...] ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255) </TASK> This patch adds a NULL check for ie->mesh_config at the top of mesh_matches_local() to return false early when the Mesh Configuration IE is absent.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Check the DVFS OPP count returned by the firmware Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none

In the Linux kernel, the following vulnerability has been resolved: unicode: Fix utf8_load() error path utf8_load() requests the symbol "utf8_data_table" and then checks if the requested UTF-8 version is supported. If it's unsupported, it tries to put the data table using symbol_put(). If an unsupported version is requested, symbol_put() fails like this: kernel BUG at kernel/module/main.c:786! RIP: 0010:__symbol_put+0x93/0xb0 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __symbol_put+0x93/0xb0 ? exc_invalid_op+0x51/0x70 ? __symbol_put+0x93/0xb0 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_cmp_name+0x10/0x10 ? __symbol_put+0x93/0xb0 ? __symbol_put+0x62/0xb0 utf8_load+0xf8/0x150 That happens because symbol_put() expects the unique string that identify the symbol, instead of a pointer to the loaded symbol. Fix that by using such string.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: xscale: Check for PTP support properly In ixp4xx_get_ts_info() ixp46x_ptp_find() is called unconditionally despite this feature only existing on ixp46x, leading to the following splat from tcpdump: root@OpenWrt:~# tcpdump -vv -X -i eth0 (...) Unable to handle kernel NULL pointer dereference at virtual address 00000238 when read (...) Call trace: ptp_clock_index from ixp46x_ptp_find+0x1c/0x38 ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64 ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108 __ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648 __dev_ethtool from dev_ethtool+0x160/0x234 dev_ethtool from dev_ioctl+0x2cc/0x460 dev_ioctl from sock_ioctl+0x1ec/0x524 sock_ioctl from sys_ioctl+0x51c/0xa94 sys_ioctl from ret_fast_syscall+0x0/0x44 (...) Segmentation fault Check for ixp46x in ixp46x_ptp_find() before trying to set up PTP to avoid this. To avoid altering the returned error code from ixp4xx_hwtstamp_set() which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter the error code. The helper function ixp46x_ptp_find() helper returns -ENODEV.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix null pointer dereference issue If SMU is disabled, during RAS initialization, there will be null pointer dereference issue here.

In the Linux kernel, the following vulnerability has been resolved: mac802154: check local interfaces before deleting sdata list syzkaller reported a corrupted list in ieee802154_if_remove. [1] Remove an IEEE 802.15.4 network interface after unregister an IEEE 802.15.4 hardware device from the system. CPU0 CPU1 ==== ==== genl_family_rcv_msg_doit ieee802154_unregister_hw ieee802154_del_iface ieee802154_remove_interfaces rdev_del_virtual_intf_deprecated list_del(&sdata->list) ieee802154_if_remove list_del_rcu The net device has been unregistered, since the rcu grace period, unregistration must be run before ieee802154_if_remove. To avoid this issue, add a check for local->interfaces before deleting sdata list. [1] kernel BUG at lib/list_debug.c:58! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6277 Comm: syz-executor157 Not tainted 6.12.0-rc6-syzkaller-00005-g557329bcecc2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__list_del_entry_valid_or_report+0xf4/0x140 lib/list_debug.c:56 Code: e8 a1 7e 00 07 90 0f 0b 48 c7 c7 e0 37 60 8c 4c 89 fe e8 8f 7e 00 07 90 0f 0b 48 c7 c7 40 38 60 8c 4c 89 fe e8 7d 7e 00 07 90 <0f> 0b 48 c7 c7 a0 38 60 8c 4c 89 fe e8 6b 7e 00 07 90 0f 0b 48 c7 RSP: 0018:ffffc9000490f3d0 EFLAGS: 00010246 RAX: 000000000000004e RBX: dead000000000122 RCX: d211eee56bb28d00 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88805b278dd8 R08: ffffffff8174a12c R09: 1ffffffff2852f0d R10: dffffc0000000000 R11: fffffbfff2852f0e R12: dffffc0000000000 R13: dffffc0000000000 R14: dead000000000100 R15: ffff88805b278cc0 FS: 0000555572f94380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056262e4a3000 CR3: 0000000078496000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:124 [inline] __list_del_entry include/linux/list.h:215 [inline] list_del_rcu include/linux/rculist.h:157 [inline] ieee802154_if_remove+0x86/0x1e0 net/mac802154/iface.c:687 rdev_del_virtual_intf_deprecated net/ieee802154/rdev-ops.h:24 [inline] ieee802154_del_iface+0x2c0/0x5c0 net/ieee802154/nl-phy.c:323 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb14/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2551 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:744 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2607 ___sys_sendmsg net/socket.c:2661 [inline] __sys_sendmsg+0x292/0x380 net/socket.c:2690 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: i3c: Add NULL pointer check in i3c_master_queue_ibi() The I3C master driver may receive an IBI from a target device that has not been probed yet. In such cases, the master calls `i3c_master_queue_ibi()` to queue an IBI work task, leading to "Unable to handle kernel read from unreadable memory" and resulting in a kernel panic. Typical IBI handling flow: 1. The I3C master scans target devices and probes their respective drivers. 2. The target device driver calls `i3c_device_request_ibi()` to enable IBI and assigns `dev->ibi = ibi`. 3. The I3C master receives an IBI from the target device and calls `i3c_master_queue_ibi()` to queue the target device driver’s IBI handler task. However, since target device events are asynchronous to the I3C probe sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`, leading to a kernel panic. Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing an uninitialized `dev->ibi`, ensuring stability.

In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_update Check if policy is NULL before dereferencing it in amd_pstate_update.

In the Linux kernel, the following vulnerability has been resolved: thermal: int340x: Add NULL check for adev Not all devices have an ACPI companion fwnode, so adev might be NULL. This is similar to the commit cd2fd6eab480 ("platform/x86: int3472: Check for adev == NULL"). Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in int3402_thermal_probe(). Note, under the same directory, int3400_thermal_probe() has such a check. [ rjw: Subject edit, added Fixes: ]

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix NULL pointer in can_accept_new_subflow When testing valkey benchmark tool with MPTCP, the kernel panics in 'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL. Call trace: mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P) subflow_syn_recv_sock (./net/mptcp/subflow.c:854) tcp_check_req (./net/ipv4/tcp_minisocks.c:863) tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268) ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207) ip_local_deliver_finish (./net/ipv4/ip_input.c:234) ip_local_deliver (./net/ipv4/ip_input.c:254) ip_rcv_finish (./net/ipv4/ip_input.c:449) ... According to the debug log, the same req received two SYN-ACK in a very short time, very likely because the client retransmits the syn ack due to multiple reasons. Even if the packets are transmitted with a relevant time interval, they can be processed by the server on different CPUs concurrently). The 'subflow_req->msk' ownership is transferred to the subflow the first, and there will be a risk of a null pointer dereference here. This patch fixes this issue by moving the 'subflow_req->msk' under the `own_req == true` conditional. Note that the !msk check in subflow_hmac_valid() can be dropped, because the same check already exists under the own_req mpj branch where the code has been moved to.