An issue was discovered in the Linux kernel through 5.16-rc6. free_charger_irq() in drivers/power/supply/wm8350_power.c lacks free of WM8350_IRQ_CHG_FAST_RDY, which is registered in wm8350_init_charger().

In the Linux kernel, the following vulnerability has been resolved: ice: Don't tx before switchdev is fully configured There is possibility that ice_eswitch_port_start_xmit might be called while some resources are still not allocated which might cause NULL pointer dereference. Fix this by checking if switchdev configuration was finished.

An issue was discovered in the Linux kernel through 5.16-rc6. malidp_crtc_reset in drivers/gpu/drm/arm/malidp_crtc.c lacks check of the return value of kzalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. ef100_update_stats in drivers/net/ethernet/sfc/ef100_nic.c lacks check of the return value of kmalloc().

An issue was discovered in the Linux kernel through 5.16-rc6. netvsc_get_ethtool_stats in drivers/net/hyperv/netvsc_drv.c lacks check of the return value of kvmalloc_array() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. lkdtm_ARRAY_BOUNDS in drivers/misc/lkdtm/bugs.c lacks check of the return value of kmalloc() and will cause the null pointer dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. _rtw_init_xmit_priv in drivers/staging/r8188eu/core/rtw_xmit.c lacks check of the return value of rtw_alloc_hwxmits() and will cause the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: mtd: core: Fix refcount error in del_mtd_device() del_mtd_device() will call of_node_put() to mtd_get_of_node(mtd), which is mtd->dev.of_node. However, memset(&mtd->dev, 0) is called before of_node_put(). As the result, of_node_put() won't do anything in del_mtd_device(), and causes the refcount leak. del_mtd_device() memset(&mtd->dev, 0, sizeof(mtd->dev) # clear mtd->dev of_node_put() mtd_get_of_node(mtd) # mtd->dev is cleared, can't locate of_node # of_node_put(NULL) won't do anything Fix the error by caching the pointer of the device_node. OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/spi-sram@0 CPU: 3 PID: 275 Comm: python3 Tainted: G N 6.1.0-rc3+ #54 0d8a1edddf51f172ff5226989a7565c6313b08e2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x67/0x83 kobject_get+0x155/0x160 of_node_get+0x1f/0x30 of_fwnode_get+0x43/0x70 fwnode_handle_get+0x54/0x80 fwnode_get_nth_parent+0xc9/0xe0 fwnode_full_name_string+0x3f/0xa0 device_node_string+0x30f/0x750 pointer+0x598/0x7a0 vsnprintf+0x62d/0x9b0 ... cfs_overlay_release+0x30/0x90 config_item_release+0xbe/0x1a0 config_item_put+0x5e/0x80 configfs_rmdir+0x3bd/0x540 vfs_rmdir+0x18c/0x320 do_rmdir+0x198/0x330 __x64_sys_rmdir+0x2c/0x40 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd [<miquel.raynal@bootlin.com>: Light reword of the commit log]

In the Linux kernel, the following vulnerability has been resolved: locking/csd_lock: Change csdlock_debug from early_param to __setup The csdlock_debug kernel-boot parameter is parsed by the early_param() function csdlock_debug(). If set, csdlock_debug() invokes static_branch_enable() to enable csd_lock_wait feature, which triggers a panic on arm64 for kernels built with CONFIG_SPARSEMEM=y and CONFIG_SPARSEMEM_VMEMMAP=n. With CONFIG_SPARSEMEM_VMEMMAP=n, __nr_to_section is called in static_key_enable() and returns NULL, resulting in a NULL dereference because mem_section is initialized only later in sparse_init(). This is also a problem for powerpc because early_param() functions are invoked earlier than jump_label_init(), also resulting in static_key_enable() failures. These failures cause the warning "static key 'xxx' used before call to jump_label_init()". Thus, early_param is too early for csd_lock_wait to run static_branch_enable(), so changes it to __setup to fix these.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix memory leak when build ntlmssp negotiate blob failed There is a memory leak when mount cifs: unreferenced object 0xffff888166059600 (size 448): comm "mount.cifs", pid 51391, jiffies 4295596373 (age 330.596s) hex dump (first 32 bytes): fe 53 4d 42 40 00 00 00 00 00 00 00 01 00 82 00 .SMB@........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060609a61>] mempool_alloc+0xe1/0x260 [<00000000adfa6c63>] cifs_small_buf_get+0x24/0x60 [<00000000ebb404c7>] __smb2_plain_req_init+0x32/0x460 [<00000000bcf875b4>] SMB2_sess_alloc_buffer+0xa4/0x3f0 [<00000000753a2987>] SMB2_sess_auth_rawntlmssp_negotiate+0xf5/0x480 [<00000000f0c1f4f9>] SMB2_sess_setup+0x253/0x410 [<00000000a8b83303>] cifs_setup_session+0x18f/0x4c0 [<00000000854bd16d>] cifs_get_smb_ses+0xae7/0x13c0 [<000000006cbc43d9>] mount_get_conns+0x7a/0x730 [<000000005922d816>] cifs_mount+0x103/0xd10 [<00000000e33def3b>] cifs_smb3_do_mount+0x1dd/0xc90 [<0000000078034979>] smb3_get_tree+0x1d5/0x300 [<000000004371f980>] vfs_get_tree+0x41/0xf0 [<00000000b670d8a7>] path_mount+0x9b3/0xdd0 [<000000005e839a7d>] __x64_sys_mount+0x190/0x1d0 [<000000009404c3b9>] do_syscall_64+0x35/0x80 When build ntlmssp negotiate blob failed, the session setup request should be freed.

In the Linux kernel, the following vulnerability has been resolved: mm/uffd: fix warning without PTE_MARKER_UFFD_WP compiled in When PTE_MARKER_UFFD_WP not configured, it's still possible to reach pte marker code and trigger an warning. Add a few CONFIG_PTE_MARKER_UFFD_WP ifdefs to make sure the code won't be reached when not compiled in.

The __do_follow_link function in fs/namei.c in the Linux kernel before 2.6.33 does not properly handle the last pathname component during use of certain filesystems, which allows local users to cause a denial of service (incorrect free operations and system crash) via an open system call.

In the Linux kernel, the following vulnerability has been resolved: ext4: init quota for 'old.inode' in 'ext4_rename' Syzbot found the following issue: ext4_parse_param: s_want_extra_isize=128 ext4_inode_info_init: s_want_extra_isize=32 ext4_rename: old.inode=ffff88823869a2c8 old.dir=ffff888238699828 new.inode=ffff88823869d7e8 new.dir=ffff888238699828 __ext4_mark_inode_dirty: inode=ffff888238699828 ea_isize=32 want_ea_size=128 __ext4_mark_inode_dirty: inode=ffff88823869a2c8 ea_isize=32 want_ea_size=128 ext4_xattr_block_set: inode=ffff88823869a2c8 ------------[ cut here ]------------ WARNING: CPU: 13 PID: 2234 at fs/ext4/xattr.c:2070 ext4_xattr_block_set.cold+0x22/0x980 Modules linked in: RIP: 0010:ext4_xattr_block_set.cold+0x22/0x980 RSP: 0018:ffff888227d3f3b0 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88823007a000 RCX: 0000000000000000 RDX: 0000000000000a03 RSI: 0000000000000040 RDI: ffff888230078178 RBP: 0000000000000000 R08: 000000000000002c R09: ffffed1075c7df8e R10: ffff8883ae3efc6b R11: ffffed1075c7df8d R12: 0000000000000000 R13: ffff88823869a2c8 R14: ffff8881012e0460 R15: dffffc0000000000 FS: 00007f350ac1f740(0000) GS:ffff8883ae200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f350a6ed6a0 CR3: 0000000237456000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? ext4_xattr_set_entry+0x3b7/0x2320 ? ext4_xattr_block_set+0x0/0x2020 ? ext4_xattr_set_entry+0x0/0x2320 ? ext4_xattr_check_entries+0x77/0x310 ? ext4_xattr_ibody_set+0x23b/0x340 ext4_xattr_move_to_block+0x594/0x720 ext4_expand_extra_isize_ea+0x59a/0x10f0 __ext4_expand_extra_isize+0x278/0x3f0 __ext4_mark_inode_dirty.cold+0x347/0x410 ext4_rename+0xed3/0x174f vfs_rename+0x13a7/0x2510 do_renameat2+0x55d/0x920 __x64_sys_rename+0x7d/0xb0 do_syscall_64+0x3b/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc As 'ext4_rename' will modify 'old.inode' ctime and mark inode dirty, which may trigger expand 'extra_isize' and allocate block. If inode didn't init quota will lead to warning. To solve above issue, init 'old.inode' firstly in 'ext4_rename'.

In the Linux kernel, the following vulnerability has been resolved: soundwire: revisit driver bind/unbind and callbacks In the SoundWire probe, we store a pointer from the driver ops into the 'slave' structure. This can lead to kernel oopses when unbinding codec drivers, e.g. with the following sequence to remove machine driver and codec driver. /sbin/modprobe -r snd_soc_sof_sdw /sbin/modprobe -r snd_soc_rt711 The full details can be found in the BugLink below, for reference the two following examples show different cases of driver ops/callbacks being invoked after the driver .remove(). kernel: BUG: kernel NULL pointer dereference, address: 0000000000000150 kernel: Workqueue: events cdns_update_slave_status_work [soundwire_cadence] kernel: RIP: 0010:mutex_lock+0x19/0x30 kernel: Call Trace: kernel: ? sdw_handle_slave_status+0x426/0xe00 [soundwire_bus 94ff184bf398570c3f8ff7efe9e32529f532e4ae] kernel: ? newidle_balance+0x26a/0x400 kernel: ? cdns_update_slave_status_work+0x1e9/0x200 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: BUG: unable to handle page fault for address: ffffffffc07654c8 kernel: Workqueue: pm pm_runtime_work kernel: RIP: 0010:sdw_bus_prep_clk_stop+0x6f/0x160 [soundwire_bus] kernel: Call Trace: kernel: <TASK> kernel: sdw_cdns_clock_stop+0xb5/0x1b0 [soundwire_cadence 1bcf98eebe5ba9833cd433323769ac923c9c6f82] kernel: intel_suspend_runtime+0x5f/0x120 [soundwire_intel aca858f7c87048d3152a4a41bb68abb9b663a1dd] kernel: ? dpm_sysfs_remove+0x60/0x60 This was not detected earlier in Intel tests since the tests first remove the parent PCI device and shut down the bus. The sequence above is a corner case which keeps the bus operational but without a driver bound. While trying to solve this kernel oopses, it became clear that the existing SoundWire bus does not deal well with the unbind case. Commit 528be501b7d4a ("soundwire: sdw_slave: add probe_complete structure and new fields") added a 'probed' status variable and a 'probe_complete' struct completion. This status is however not reset on remove and likewise the 'probe complete' is not re-initialized, so the bind/unbind/bind test cases would fail. The timeout used before the 'update_status' callback was also a bad idea in hindsight, there should really be no timing assumption as to if and when a driver is bound to a device. An initial draft was based on device_lock() and device_unlock() was tested. This proved too complicated, with deadlocks created during the suspend-resume sequences, which also use the same device_lock/unlock() as the bind/unbind sequences. On a CometLake device, a bad DSDT/BIOS caused spurious resumes and the use of device_lock() caused hangs during suspend. After multiple weeks or testing and painful reverse-engineering of deadlocks on different devices, we looked for alternatives that did not interfere with the device core. A bus notifier was used successfully to keep track of DRIVER_BOUND and DRIVER_UNBIND events. This solved the bind-unbind-bind case in tests, but it can still be defeated with a theoretical corner case where the memory is freed by a .remove while the callback is in use. The notifier only helps make sure the driver callbacks are valid, but not that the memory allocated in probe remains valid while the callbacks are invoked. This patch suggests the introduction of a new 'sdw_dev_lock' mutex protecting probe/remove and all driver callbacks. Since this mutex is 'local' to SoundWire only, it does not interfere with existing locks and does not create deadlocks. In addition, this patch removes the 'probe_complete' completion, instead we directly invoke the 'update_status' from the probe routine. That removes any sort of timing dependency and a much better support for the device/driver model, the driver could be bound before the bus started, or eons after the bus started and the hardware would be properly initialized in all cases. BugLink: https://github.com/thesofproject/linux/is ---truncated---

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on destination blkaddr during recovery As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216456 loop5: detected capacity change from 0 to 131072 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): recover_inode: ino = 6, name = hln, inline = 1 F2FS-fs (loop5): recover_data: ino = 6 (i_size: recover) err = 0 F2FS-fs (loop5): Bitmap was wrongly set, blk:5634 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1013 at fs/f2fs/segment.c:2198 RIP: 0010:update_sit_entry+0xa55/0x10b0 [f2fs] Call Trace: <TASK> f2fs_do_replace_block+0xa98/0x1890 [f2fs] f2fs_replace_block+0xeb/0x180 [f2fs] recover_data+0x1a69/0x6ae0 [f2fs] f2fs_recover_fsync_data+0x120d/0x1fc0 [f2fs] f2fs_fill_super+0x4665/0x61e0 [f2fs] mount_bdev+0x2cf/0x3b0 legacy_get_tree+0xed/0x1d0 vfs_get_tree+0x81/0x2b0 path_mount+0x47e/0x19d0 do_mount+0xce/0xf0 __x64_sys_mount+0x12c/0x1a0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd If we enable CONFIG_F2FS_CHECK_FS config, it will trigger a kernel panic instead of warning. The root cause is: in fuzzed image, SIT table is inconsistent with inode mapping table, result in triggering such warning during SIT table update. This patch introduces a new flag DATA_GENERIC_ENHANCE_UPDATE, w/ this flag, data block recovery flow can check destination blkaddr's validation in SIT table, and skip f2fs_replace_block() to avoid inconsistent status.

In the Linux kernel, the following vulnerability has been resolved: orangefs: Fix kmemleak in orangefs_sysfs_init() When insert and remove the orangefs module, there are kobjects memory leaked as below: unreferenced object 0xffff88810f95af00 (size 64): comm "insmod", pid 783, jiffies 4294813439 (age 65.512s) hex dump (first 32 bytes): a0 83 af 01 81 88 ff ff 08 af 95 0f 81 88 ff ff ................ 08 af 95 0f 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000005a6e4dfe>] orangefs_sysfs_init+0x42/0x3a0 [<00000000722645ca>] 0xffffffffa02780fe [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810f95ae80 (size 64): comm "insmod", pid 783, jiffies 4294813439 (age 65.512s) hex dump (first 32 bytes): c8 90 0f 02 81 88 ff ff 88 ae 95 0f 81 88 ff ff ................ 88 ae 95 0f 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000001a4841fa>] orangefs_sysfs_init+0xc7/0x3a0 [<00000000722645ca>] 0xffffffffa02780fe [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810f95ae00 (size 64): comm "insmod", pid 783, jiffies 4294813440 (age 65.511s) hex dump (first 32 bytes): 60 87 a1 00 81 88 ff ff 08 ae 95 0f 81 88 ff ff `............... 08 ae 95 0f 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000005915e797>] orangefs_sysfs_init+0x12b/0x3a0 [<00000000722645ca>] 0xffffffffa02780fe [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810f95ad80 (size 64): comm "insmod", pid 783, jiffies 4294813440 (age 65.511s) hex dump (first 32 bytes): 78 90 0f 02 81 88 ff ff 88 ad 95 0f 81 88 ff ff x............... 88 ad 95 0f 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000007a14eb35>] orangefs_sysfs_init+0x1ac/0x3a0 [<00000000722645ca>] 0xffffffffa02780fe [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 unreferenced object 0xffff88810f95ac00 (size 64): comm "insmod", pid 783, jiffies 4294813440 (age 65.531s) hex dump (first 32 bytes): e0 ff 67 02 81 88 ff ff 08 ac 95 0f 81 88 ff ff ..g............. 08 ac 95 0f 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000001f38adcb>] orangefs_sysfs_init+0x291/0x3a0 [<00000000722645ca>] 0xffffffffa02780fe [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix NULL-pointer dereferences There are several places where we can crash the kernel by requesting lines, unbinding the GPIO device, then calling any of the system calls relevant to the GPIO character device's annonymous file descriptors: ioctl(), read(), poll(). While I observed it with the GPIO simulator, it will also happen for any of the GPIO devices that can be hot-unplugged - for instance any HID GPIO expander (e.g. CP2112). This affects both v1 and v2 uAPI. This fixes it partially by checking if gdev->chip is not NULL but it doesn't entirely remedy the situation as we still have a race condition in which another thread can remove the device after the check.

In the Linux kernel, the following vulnerability has been resolved: test_firmware: fix memory leak in test_firmware_init() When misc_register() failed in test_firmware_init(), the memory pointed by test_fw_config->name is not released. The memory leak information is as follows: unreferenced object 0xffff88810a34cb00 (size 32): comm "insmod", pid 7952, jiffies 4294948236 (age 49.060s) hex dump (first 32 bytes): 74 65 73 74 2d 66 69 72 6d 77 61 72 65 2e 62 69 test-firmware.bi 6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 n............... backtrace: [<ffffffff81b21fcb>] __kmalloc_node_track_caller+0x4b/0xc0 [<ffffffff81affb96>] kstrndup+0x46/0xc0 [<ffffffffa0403a49>] __test_firmware_config_init+0x29/0x380 [test_firmware] [<ffffffffa040f068>] 0xffffffffa040f068 [<ffffffff81002c41>] do_one_initcall+0x141/0x780 [<ffffffff816a72c3>] do_init_module+0x1c3/0x630 [<ffffffff816adb9e>] load_module+0x623e/0x76a0 [<ffffffff816af471>] __do_sys_finit_module+0x181/0x240 [<ffffffff89978f99>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Validate the box size for the snooped cursor Invalid userspace dma surface copies could potentially overflow the memcpy from the surface to the snooped image leading to crashes. To fix it the dimensions of the copybox have to be validated against the expected size of the snooped cursor.

In the Linux kernel, the following vulnerability has been resolved: bpf: make sure skb->len != 0 when redirecting to a tunneling device syzkaller managed to trigger another case where skb->len == 0 when we enter __dev_queue_xmit: WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline] WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295 Call Trace: dev_queue_xmit+0x17/0x20 net/core/dev.c:4406 __bpf_tx_skb net/core/filter.c:2115 [inline] __bpf_redirect_no_mac net/core/filter.c:2140 [inline] __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163 ____bpf_clone_redirect net/core/filter.c:2447 [inline] bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419 bpf_prog_48159a89cb4a9a16+0x59/0x5e bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline] __bpf_prog_run include/linux/filter.h:596 [inline] bpf_prog_run include/linux/filter.h:603 [inline] bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline] __se_sys_bpf kernel/bpf/syscall.c:5089 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x61/0xc6 The reproducer doesn't really reproduce outside of syzkaller environment, so I'm taking a guess here. It looks like we do generate correct ETH_HLEN-sized packet, but we redirect the packet to the tunneling device. Before we do so, we __skb_pull l2 header and arrive again at skb->len == 0. Doesn't seem like we can do anything better than having an explicit check after __skb_pull?

In the Linux kernel, the following vulnerability has been resolved: usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released.

In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: block: don't allow the same type rq_qos add more than once In our test of iocost, we encountered some list add/del corruptions of inner_walk list in ioc_timer_fn. The reason can be described as follows: cpu 0 cpu 1 ioc_qos_write ioc_qos_write ioc = q_to_ioc(queue); if (!ioc) { ioc = kzalloc(); ioc = q_to_ioc(queue); if (!ioc) { ioc = kzalloc(); ... rq_qos_add(q, rqos); } ... rq_qos_add(q, rqos); ... } When the io.cost.qos file is written by two cpus concurrently, rq_qos may be added to one disk twice. In that case, there will be two iocs enabled and running on one disk. They own different iocgs on their active list. In the ioc_timer_fn function, because of the iocgs from two iocs have the same root iocg, the root iocg's walk_list may be overwritten by each other and this leads to list add/del corruptions in building or destroying the inner_walk list. And so far, the blk-rq-qos framework works in case that one instance for one type rq_qos per queue by default. This patch make this explicit and also fix the crash above.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix memory leak in vkms_init() A memory leak was reported after the vkms module install failed. unreferenced object 0xffff88810bc28520 (size 16): comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s) hex dump (first 16 bytes): 01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............ backtrace: [<00000000e7561ff8>] kmalloc_trace+0x27/0x60 [<000000000b1954a0>] 0xffffffffc45200a9 [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0 [<000000001505ee87>] do_init_module+0x1a4/0x680 [<00000000958079ad>] load_module+0x6249/0x7110 [<00000000117e4696>] __do_sys_finit_module+0x140/0x200 [<00000000f74b12d2>] do_syscall_64+0x35/0x80 [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that the vkms_init() returns without checking the return value of vkms_create(), and if the vkms_create() failed, the config allocated at the beginning of vkms_init() is leaked. vkms_init() config = kmalloc(...) # config allocated ... return vkms_create() # vkms_create failed and config is leaked Fix this problem by checking return value of vkms_create() and free the config if error happened.

In the Linux kernel, the following vulnerability has been resolved: mmc: wmt-sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, clk_disable_unprepare() also needs be called.

In the Linux kernel, the following vulnerability has been resolved: crypto: cavium - prevent integer overflow loading firmware The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "ntohl(ucode->code_length) * 2" multiplication can have an integer overflow.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv() In rtw_init_cmd_priv(), if `pcmdpriv->rsp_allocated_buf` is allocated in failure, then `pcmdpriv->cmd_allocated_buf` will be not properly released. Besides, considering there are only two error paths and the first one can directly return, so we do not need implicitly jump to the `exit` tag to execute the error handler. So this patch added `kfree(pcmdpriv->cmd_allocated_buf);` on the error path to release the resource and simplified the return logic of rtw_init_cmd_priv(). As there is no proper device to test with, no runtime testing was performed.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY in this case. This may trigger a call trace in iw_cm. A simple way to trigger this: server: ib_send_lat client: ib_send_lat -R <server_ip> The call trace looks like this: kernel BUG at drivers/infiniband/core/iwcm.c:894! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <...> Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: <TASK> cm_work_handler+0x1dd/0x370 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x49/0x2e0 ? rescuer_thread+0x370/0x370 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failure adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.

IBM EntireX 11.1 could allow a local user to cause a denial of service due to an unhandled error and fault isolation.

In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr() __qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr" is released while "mr->info.pbl_table" is not released, which will lead to a memory leak. We should release the "mr->info.pbl_table" with qedr_free_pbl() when error occurs to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd: cleanup in probe error path Add proper error path in probe() to cleanup resources previously acquired/allocated to fix warnings visible during probe deferral: notifier callback qcom_slim_ngd_ssr_notify already registered WARNING: CPU: 6 PID: 70 at kernel/notifier.c:28 notifier_chain_register+0x5c/0x90 Modules linked in: CPU: 6 PID: 70 Comm: kworker/u16:1 Not tainted 6.0.0-rc3-next-20220830 #380 Call trace: notifier_chain_register+0x5c/0x90 srcu_notifier_chain_register+0x44/0x90 qcom_register_ssr_notifier+0x38/0x4c qcom_slim_ngd_ctrl_probe+0xd8/0x400 platform_probe+0x6c/0xe0 really_probe+0xbc/0x2d4 __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x12c __device_attach_driver+0xb8/0x120 bus_for_each_drv+0x78/0xd0 __device_attach+0xa8/0x1c0 device_initial_probe+0x18/0x24 bus_probe_device+0xa0/0xac deferred_probe_work_func+0x88/0xc0 process_one_work+0x1d4/0x320 worker_thread+0x2cc/0x44c kthread+0x110/0x114 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly When an extended state component is not present in fpstate, but in init state, the function copies from init_fpstate via copy_feature(). But, dynamic states are not present in init_fpstate because of all-zeros init states. Then retrieving them from init_fpstate will explode like this: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:memcpy_erms+0x6/0x10 ? __copy_xstate_to_uabi_buf+0x381/0x870 fpu_copy_guest_fpstate_to_uabi+0x28/0x80 kvm_arch_vcpu_ioctl+0x14c/0x1460 [kvm] ? __this_cpu_preempt_check+0x13/0x20 ? vmx_vcpu_put+0x2e/0x260 [kvm_intel] kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? kvm_vcpu_ioctl+0xea/0x6b0 [kvm] ? __fget_light+0xd4/0x130 __x64_sys_ioctl+0xe3/0x910 ? debug_smp_processor_id+0x17/0x20 ? fpregs_assert_state_consistent+0x27/0x50 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Adjust the 'mask' to zero out the userspace buffer for the features that are not available both from fpstate and from init_fpstate. The dynamic features depend on the compacted XSAVE format. Ensure it is enabled before reading XCOMP_BV in init_fpstate.

In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: Prevent leaking grants Prior to this commit, if a grant mapping operation failed partially, some of the entries in the map_ops array would be invalid, whereas all of the entries in the kmap_ops array would be valid. This in turn would cause the following logic in gntdev_map_grant_pages to become invalid: for (i = 0; i < map->count; i++) { if (map->map_ops[i].status == GNTST_okay) { map->unmap_ops[i].handle = map->map_ops[i].handle; if (!use_ptemod) alloced++; } if (use_ptemod) { if (map->kmap_ops[i].status == GNTST_okay) { if (map->map_ops[i].status == GNTST_okay) alloced++; map->kunmap_ops[i].handle = map->kmap_ops[i].handle; } } } ... atomic_add(alloced, &map->live_grants); Assume that use_ptemod is true (i.e., the domain mapping the granted pages is a paravirtualized domain). In the code excerpt above, note that the "alloced" variable is only incremented when both kmap_ops[i].status and map_ops[i].status are set to GNTST_okay (i.e., both mapping operations are successful). However, as also noted above, there are cases where a grant mapping operation fails partially, breaking the assumption of the code excerpt above. The aforementioned causes map->live_grants to be incorrectly set. In some cases, all of the map_ops mappings fail, but all of the kmap_ops mappings succeed, meaning that live_grants may remain zero. This in turn makes it impossible to unmap the successfully grant-mapped pages pointed to by kmap_ops, because unmap_grant_pages has the following snippet of code at its beginning: if (atomic_read(&map->live_grants) == 0) return; /* Nothing to do */ In other cases where only some of the map_ops mappings fail but all kmap_ops mappings succeed, live_grants is made positive, but when the user requests unmapping the grant-mapped pages, __unmap_grant_pages_done will then make map->live_grants negative, because the latter function does not check if all of the pages that were requested to be unmapped were actually unmapped, and the same function unconditionally subtracts "data->count" (i.e., a value that can be greater than map->live_grants) from map->live_grants. The side effects of a negative live_grants value have not been studied. The net effect of all of this is that grant references are leaked in one of the above conditions. In Qubes OS v4.1 (which uses Xen's grant mechanism extensively for X11 GUI isolation), this issue manifests itself with warning messages like the following to be printed out by the Linux kernel in the VM that had granted pages (that contain X11 GUI window data) to dom0: "g.e. 0x1234 still pending", especially after the user rapidly resizes GUI VM windows (causing some grant-mapping operations to partially or completely fail, due to the fact that the VM unshares some of the pages as part of the window resizing, making the pages impossible to grant-map from dom0). The fix for this issue involves counting all successful map_ops and kmap_ops mappings separately, and then adding the sum to live_grants. During unmapping, only the number of successfully unmapped grants is subtracted from live_grants. The code is also modified to check for negative live_grants values after the subtraction and warn the user.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: fix potential memory leak in damon_reclaim_init() damon_reclaim_init() allocates a memory chunk for ctx with damon_new_ctx(). When damon_select_ops() fails, ctx is not released, which will lead to a memory leak. We should release the ctx with damon_destroy_ctx() when damon_select_ops() fails to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix adminq error handling iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]

In the Linux kernel, the following vulnerability has been resolved: lib/fonts: fix undefined behavior in bit shift for get_default_font Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in lib/fonts/fonts.c:139:20 left shift of 1 by 31 places cannot be represented in type 'int' <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c get_default_font+0x1c7/0x1f0 fbcon_startup+0x347/0x3a0 do_take_over_console+0xce/0x270 do_fbcon_takeover+0xa1/0x170 do_fb_registered+0x2a8/0x340 fbcon_fb_registered+0x47/0xe0 register_framebuffer+0x294/0x4a0 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper] drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper] drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper] drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper] bochs_pci_probe+0x6ca/0x772 [bochs] local_pci_probe+0x4d/0xb0 pci_device_probe+0x119/0x320 really_probe+0x181/0x550 __driver_probe_device+0xc6/0x220 driver_probe_device+0x32/0x100 __driver_attach+0x195/0x200 bus_for_each_dev+0xbb/0x120 driver_attach+0x27/0x30 bus_add_driver+0x22e/0x2f0 driver_register+0xa9/0x190 __pci_register_driver+0x90/0xa0 bochs_pci_driver_init+0x52/0x1000 [bochs] do_one_initcall+0x76/0x430 do_init_module+0x61/0x28a load_module+0x1f82/0x2e50 __do_sys_finit_module+0xf8/0x190 __x64_sys_finit_module+0x23/0x30 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix error unwind in rxe_create_qp() In the function rxe_create_qp(), rxe_qp_from_init() is called to initialize qp, internally things like the spin locks are not setup until rxe_qp_init_req(). If an error occures before this point then the unwind will call rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task() which will oops when trying to access the uninitialized spinlock. Move the spinlock initializations earlier before any failures.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null-deref in dm_resume [Why] Fixing smatch error: dm_resume() error: we previously assumed 'aconnector->dc_link' could be null [How] Check if dc_link null at the beginning of the loop, so further checks can be dropped.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpci: fix of node refcount leak in tcpci_register_port() I got the following report while doing device(mt6370-tcpc) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@34/tcpc/connector The 'fwnode' set in tcpci_parse_config() which is called in tcpci_register_port(), its node refcount is increased in device_get_named_child_node(). It needs be put while exiting, so call fwnode_handle_put() in the error path of tcpci_register_port() and in tcpci_unregister_port() to avoid leak.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix locking in rxrpc's sendmsg Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Fix global state lock backoff We need to grab the lock after the early return for !hwpipe case. Otherwise, we could have hit contention yet still returned 0. Fixes an issue that the new CONFIG_DRM_DEBUG_MODESET_LOCK stuff flagged in CI: WARNING: CPU: 0 PID: 282 at drivers/gpu/drm/drm_modeset_lock.c:296 drm_modeset_lock+0xf8/0x154 Modules linked in: CPU: 0 PID: 282 Comm: kms_cursor_lega Tainted: G W 5.19.0-rc2-15930-g875cc8bc536a #1 Hardware name: Qualcomm Technologies, Inc. DB820c (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock+0xf8/0x154 lr : drm_atomic_get_private_obj_state+0x84/0x170 sp : ffff80000cfab6a0 x29: ffff80000cfab6a0 x28: 0000000000000000 x27: ffff000083bc4d00 x26: 0000000000000038 x25: 0000000000000000 x24: ffff80000957ca58 x23: 0000000000000000 x22: ffff000081ace080 x21: 0000000000000001 x20: ffff000081acec18 x19: ffff80000cfabb80 x18: 0000000000000038 x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffea0d0 x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47 x11: ffff80000a386aa8 x10: 0000000000000029 x9 : ffff80000cfab610 x8 : 0000000000000029 x7 : 0000000000000014 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff8000081ad904 x3 : 0000000000000029 x2 : ffff0000801db4c0 x1 : ffff80000cfabb80 x0 : ffff000081aceb58 Call trace: drm_modeset_lock+0xf8/0x154 drm_atomic_get_private_obj_state+0x84/0x170 mdp5_get_global_state+0x54/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x2ec/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 ... ---[ end trace 0000000000000000 ]--- drm_modeset_lock attempting to lock a contended lock without backoff: drm_modeset_lock+0x148/0x154 mdp5_get_global_state+0x30/0x6c mdp5_pipe_release+0x2c/0xd4 mdp5_plane_atomic_check+0x290/0x414 drm_atomic_helper_check_planes+0xd8/0x210 drm_atomic_helper_check+0x54/0xb0 drm_atomic_check_only+0x4b0/0x8f4 drm_atomic_commit+0x68/0xe0 Patchwork: https://patchwork.freedesktop.org/patch/492701/

In the Linux kernel, the following vulnerability has been resolved: IB/mad: Don't call to function that might sleep while in atomic context Tracepoints are not allowed to sleep, as such the following splat is generated due to call to ib_query_pkey() in atomic context. WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220 CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.3.1.el8.x86_64 #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+a55c8938 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:rb_commit+0xc1/0x220 RSP: 0000:ffffa8ac80f9bca0 EFLAGS: 00010202 RAX: ffff8951c7c01300 RBX: ffff8951c7c14a00 RCX: 0000000000000246 RDX: ffff8951c707c000 RSI: ffff8951c707c57c RDI: ffff8951c7c14a00 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8951c7c01300 R11: 0000000000000001 R12: 0000000000000246 R13: 0000000000000000 R14: ffffffff964c70c0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8951fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f20e8f39010 CR3: 000000002ca10005 CR4: 0000000000170ef0 Call Trace: ring_buffer_unlock_commit+0x1d/0xa0 trace_buffer_unlock_commit_regs+0x3b/0x1b0 trace_event_buffer_commit+0x67/0x1d0 trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core] ib_mad_recv_done+0x48b/0xc10 [ib_core] ? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core] __ib_process_cq+0x91/0x1c0 [ib_core] ib_cq_poll_work+0x26/0x80 [ib_core] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 78ba8509d3830a16 ]---

In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix deadlock and link starvation in outgoing data path The current implementation queues up new control and user packets as needed and processes this queue down to the ldisc in the same code path. That means that the upper and the lower layer are hard coupled in the code. Due to this deadlocks can happen as seen below while transmitting data, especially during ldisc congestion. Furthermore, the data channels starve the control channel on high transmission load on the ldisc. Introduce an additional control channel data queue to prevent timeouts and link hangups during ldisc congestion. This is being processed before the user channel data queue in gsm_data_kick(), i.e. with the highest priority. Put the queue to ldisc data path into a workqueue and trigger it whenever new data has been put into the transmission queue. Change gsm_dlci_data_sweep() accordingly to fill up the transmission queue until TX_THRESH_HI. This solves the locking issue, keeps latency low and provides good performance on high data load. Note that now all packets from a DLCI are removed from the internal queue if the associated DLCI was closed. This ensures that no data is sent by the introduced write task to an already closed DLCI. BUG: spinlock recursion on CPU#0, test_v24_loop/124 lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0 CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 do_raw_spin_lock+0x76/0xa0 _raw_spin_lock_irqsave+0x72/0x80 uart_write_room+0x3b/0xc0 gsm_data_kick+0x14b/0x240 [n_gsm] gsmld_write_wakeup+0x35/0x70 [n_gsm] tty_wakeup+0x53/0x60 tty_port_default_wakeup+0x1b/0x30 serial8250_tx_chars+0x12f/0x220 serial8250_handle_irq.part.0+0xfe/0x150 serial8250_default_handle_irq+0x48/0x80 serial8250_interrupt+0x56/0xa0 __handle_irq_event_percpu+0x78/0x1f0 handle_irq_event+0x34/0x70 handle_fasteoi_irq+0x90/0x1e0 __common_interrupt+0x69/0x100 common_interrupt+0x48/0xc0 asm_common_interrupt+0x1e/0x40 RIP: 0010:__do_softirq+0x83/0x34e Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61 80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00 RSP: 0018:ffffc90000003f98 EFLAGS: 00000286 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7 RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000 ? __do_softirq+0x73/0x34e irq_exit_rcu+0xb5/0x100 common_interrupt+0xa4/0xc0 </IRQ> <TASK> asm_common_interrupt+0x1e/0x40 RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50 Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff 48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff 65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44 RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000 RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001 RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8 ? _raw_spin_unlock_irqrestore+0x23/0x50 gsmtty_write+0x65/0x80 [n_gsm] n_tty_write+0x33f/0x530 ? swake_up_all+0xe0/0xe0 file_tty_write.constprop.0+0x1b1/0x320 ? n_tty_flush_buffer+0xb0/0xb0 new_sync_write+0x10c/0x190 vfs_write+0x282/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f3e5e35c15c Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY Only set MLX5_LAG_FLAG_NDEVS_READY if both netdevices are registered. Doing so guarantees that both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev have valid pointers when MLX5_LAG_FLAG_NDEVS_READY is set. The core issue is asymmetry in setting MLX5_LAG_FLAG_NDEVS_READY and clearing it. Setting it is done wrongly when both ldev->pf[MLX5_LAG_P0].dev and ldev->pf[MLX5_LAG_P1].dev are set; clearing it is done right when either of ldev->pf[i].netdev is cleared. Consider the following scenario: 1. PF0 loads and sets ldev->pf[MLX5_LAG_P0].dev to a valid pointer 2. PF1 loads and sets both ldev->pf[MLX5_LAG_P1].dev and ldev->pf[MLX5_LAG_P1].netdev with valid pointers. This results in MLX5_LAG_FLAG_NDEVS_READY is set. 3. PF0 is unloaded before setting dev->pf[MLX5_LAG_P0].netdev. MLX5_LAG_FLAG_NDEVS_READY remains set. Further execution of mlx5_do_bond() will result in null pointer dereference when calling mlx5_lag_is_multipath() This patch fixes the following call trace actually encountered: [ 1293.475195] BUG: kernel NULL pointer dereference, address: 00000000000009a8 [ 1293.478756] #PF: supervisor read access in kernel mode [ 1293.481320] #PF: error_code(0x0000) - not-present page [ 1293.483686] PGD 0 P4D 0 [ 1293.484434] Oops: 0000 [#1] SMP PTI [ 1293.485377] CPU: 1 PID: 23690 Comm: kworker/u16:2 Not tainted 5.18.0-rc5_for_upstream_min_debug_2022_05_05_10_13 #1 [ 1293.488039] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1293.490836] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 1293.492448] RIP: 0010:mlx5_lag_is_multipath+0x5/0x50 [mlx5_core] [ 1293.494044] Code: e8 70 40 ff e0 48 8b 14 24 48 83 05 5c 1a 1b 00 01 e9 19 ff ff ff 48 83 05 47 1a 1b 00 01 eb d7 0f 1f 44 00 00 0f 1f 44 00 00 <48> 8b 87 a8 09 00 00 48 85 c0 74 26 48 83 05 a7 1b 1b 00 01 41 b8 [ 1293.498673] RSP: 0018:ffff88811b2fbe40 EFLAGS: 00010202 [ 1293.500152] RAX: ffff88818a94e1c0 RBX: ffff888165eca6c0 RCX: 0000000000000000 [ 1293.501841] RDX: 0000000000000001 RSI: ffff88818a94e1c0 RDI: 0000000000000000 [ 1293.503585] RBP: 0000000000000000 R08: ffff888119886740 R09: ffff888165eca73c [ 1293.505286] R10: 0000000000000018 R11: 0000000000000018 R12: ffff88818a94e1c0 [ 1293.506979] R13: ffff888112729800 R14: 0000000000000000 R15: ffff888112729858 [ 1293.508753] FS: 0000000000000000(0000) GS:ffff88852cc40000(0000) knlGS:0000000000000000 [ 1293.510782] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1293.512265] CR2: 00000000000009a8 CR3: 00000001032d4002 CR4: 0000000000370ea0 [ 1293.514001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.515806] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In the Linux kernel, the following vulnerability has been resolved: iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() The fsl_pamu_probe() returns directly when create_csd() failed, leaving irq and memories unreleased. Fix by jumping to error if create_csd() returns error.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix corrupted packets for XDP_SHARED_UMEM Fix an issue in XDP_SHARED_UMEM mode together with aligned mode where packets are corrupted for the second and any further sockets bound to the same umem. In other words, this does not affect the first socket bound to the umem. The culprit for this bug is that the initialization of the DMA addresses for the pre-populated xsk buffer pool entries was not performed for any socket but the first one bound to the umem. Only the linear array of DMA addresses was populated. Fix this by populating the DMA addresses in the xsk buffer pool for every socket bound to the same umem.

In the Linux kernel, the following vulnerability has been resolved: io_uring/msg_ring: Fix NULL pointer dereference in io_msg_send_fd() Syzkaller produced the below call trace: BUG: KASAN: null-ptr-deref in io_msg_ring+0x3cb/0x9f0 Write of size 8 at addr 0000000000000070 by task repro/16399 CPU: 0 PID: 16399 Comm: repro Not tainted 6.1.0-rc1 #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ? io_msg_ring+0x3cb/0x9f0 kasan_report+0xbc/0xf0 ? io_msg_ring+0x3cb/0x9f0 kasan_check_range+0x140/0x190 io_msg_ring+0x3cb/0x9f0 ? io_msg_ring_prep+0x300/0x300 io_issue_sqe+0x698/0xca0 io_submit_sqes+0x92f/0x1c30 __do_sys_io_uring_enter+0xae4/0x24b0 .... RIP: 0033:0x7f2eaf8f8289 RSP: 002b:00007fff40939718 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2eaf8f8289 RDX: 0000000000000000 RSI: 0000000000006f71 RDI: 0000000000000004 RBP: 00007fff409397a0 R08: 0000000000000000 R09: 0000000000000039 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004006d0 R13: 00007fff40939880 R14: 0000000000000000 R15: 0000000000000000 </TASK> Kernel panic - not syncing: panic_on_warn set ... We don't have a NULL check on file_ptr in io_msg_send_fd() function, so when file_ptr is NUL src_file is also NULL and get_file() dereferences a NULL pointer and leads to above crash. Add a NULL check to fix this issue.

In the Linux kernel, the following vulnerability has been resolved: net: do not sense pfmemalloc status in skb_append_pagefrags() skb_append_pagefrags() is used by af_unix and udp sendpage() implementation so far. In commit 326140063946 ("tcp: TX zerocopy should not sense pfmemalloc status") we explained why we should not sense pfmemalloc status for pages owned by user space. We should also use skb_fill_page_desc_noacc() in skb_append_pagefrags() to avoid following KCSAN report: BUG: KCSAN: data-race in lru_add_fn / skb_append_pagefrags write to 0xffffea00058fc1c8 of 8 bytes by task 17319 on cpu 0: __list_add include/linux/list.h:73 [inline] list_add include/linux/list.h:88 [inline] lruvec_add_folio include/linux/mm_inline.h:323 [inline] lru_add_fn+0x327/0x410 mm/swap.c:228 folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246 lru_add_drain_cpu+0x73/0x250 mm/swap.c:669 lru_add_drain+0x21/0x60 mm/swap.c:773 free_pages_and_swap_cache+0x16/0x70 mm/swap_state.c:311 tlb_batch_pages_flush mm/mmu_gather.c:59 [inline] tlb_flush_mmu_free mm/mmu_gather.c:256 [inline] tlb_flush_mmu+0x5b2/0x640 mm/mmu_gather.c:263 tlb_finish_mmu+0x86/0x100 mm/mmu_gather.c:363 exit_mmap+0x190/0x4d0 mm/mmap.c:3098 __mmput+0x27/0x1b0 kernel/fork.c:1185 mmput+0x3d/0x50 kernel/fork.c:1207 copy_process+0x19fc/0x2100 kernel/fork.c:2518 kernel_clone+0x166/0x550 kernel/fork.c:2671 __do_sys_clone kernel/fork.c:2812 [inline] __se_sys_clone kernel/fork.c:2796 [inline] __x64_sys_clone+0xc3/0xf0 kernel/fork.c:2796 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffea00058fc1c8 of 8 bytes by task 17325 on cpu 1: page_is_pfmemalloc include/linux/mm.h:1817 [inline] __skb_fill_page_desc include/linux/skbuff.h:2432 [inline] skb_fill_page_desc include/linux/skbuff.h:2453 [inline] skb_append_pagefrags+0x210/0x600 net/core/skbuff.c:3974 unix_stream_sendpage+0x45e/0x990 net/unix/af_unix.c:2338 kernel_sendpage+0x184/0x300 net/socket.c:3561 sock_sendpage+0x5a/0x70 net/socket.c:1054 pipe_to_sendpage+0x128/0x160 fs/splice.c:361 splice_from_pipe_feed fs/splice.c:415 [inline] __splice_from_pipe+0x222/0x4d0 fs/splice.c:559 splice_from_pipe fs/splice.c:594 [inline] generic_splice_sendpage+0x89/0xc0 fs/splice.c:743 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:931 splice_direct_to_actor+0x305/0x620 fs/splice.c:886 do_splice_direct+0xfb/0x180 fs/splice.c:974 do_sendfile+0x3bf/0x910 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xffffea00058fc188 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 17325 Comm: syz-executor.0 Not tainted 6.1.0-rc1-syzkaller-00158-g440b7895c990-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix hung when signal interrupts nbd_start_device_ioctl() syzbot reported hung task [1]. The following program is a simplified version of the reproducer: int main(void) { int sv[2], fd; if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0) return 1; if ((fd = open("/dev/nbd0", 0)) < 0) return 1; if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0) return 1; if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0) return 1; if (ioctl(fd, NBD_DO_IT) < 0) return 1; return 0; } When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs. This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl().