In the Linux kernel, the following vulnerability has been resolved: powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address of_get_next_parent() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() in the error path to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix potential memory leak in brcmf_netdev_start_xmit() The brcmf_netdev_start_xmit() returns NETDEV_TX_OK without freeing skb in case of pskb_expand_head() fails, add dev_kfree_skb() to fix it. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: padata: Always leave BHs disabled when running ->parallel() A deadlock can happen when an overloaded system runs ->parallel() in the context of the current task: padata_do_parallel ->parallel() pcrypt_aead_enc/dec padata_do_serial spin_lock(&reorder->lock) // BHs still enabled <interrupt> ... __do_softirq ... padata_do_serial spin_lock(&reorder->lock) It's a bug for BHs to be on in _do_serial as Steffen points out, so ensure they're off in the "current task" case like they are in padata_parallel_worker to avoid this situation.

In the Linux kernel, the following vulnerability has been resolved: coresight: trbe: remove cpuhp instance node before remove cpuhp state cpuhp_state_add_instance() and cpuhp_state_remove_instance() should be used in pairs. Or there will lead to the warn on cpuhp_remove_multi_state() since the cpuhp_step list is not empty. The following is the error log with 'rmmod coresight-trbe': Error: Removing state 215 which has instances left. Call trace: __cpuhp_remove_state_cpuslocked+0x144/0x160 __cpuhp_remove_state+0xac/0x100 arm_trbe_device_remove+0x2c/0x60 [coresight_trbe] platform_remove+0x34/0x70 device_remove+0x54/0x90 device_release_driver_internal+0x1e4/0x250 driver_detach+0x5c/0xb0 bus_remove_driver+0x64/0xc0 driver_unregister+0x3c/0x70 platform_driver_unregister+0x20/0x30 arm_trbe_exit+0x1c/0x658 [coresight_trbe] __arm64_sys_delete_module+0x1ac/0x24c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x1a0 do_el0_svc+0x38/0xd0 el0_svc+0x2c/0xc0 el0t_64_sync_handler+0x1ac/0x1b0 el0t_64_sync+0x19c/0x1a0 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Lag, fix failure to cancel delayed bond work Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554

In the Linux kernel, the following vulnerability has been resolved: fs: dlm: fix invalid derefence of sb_lvbptr I experience issues when putting a lkbsb on the stack and have sb_lvbptr field to a dangled pointer while not using DLM_LKF_VALBLK. It will crash with the following kernel message, the dangled pointer is here 0xdeadbeef as example: [ 102.749317] BUG: unable to handle page fault for address: 00000000deadbeef [ 102.749320] #PF: supervisor read access in kernel mode [ 102.749323] #PF: error_code(0x0000) - not-present page [ 102.749325] PGD 0 P4D 0 [ 102.749332] Oops: 0000 [#1] PREEMPT SMP PTI [ 102.749336] CPU: 0 PID: 1567 Comm: lock_torture_wr Tainted: G W 5.19.0-rc3+ #1565 [ 102.749343] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-2.module+el8.7.0+15506+033991b0 04/01/2014 [ 102.749344] RIP: 0010:memcpy_erms+0x6/0x10 [ 102.749353] Code: cc cc cc cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 102.749355] RSP: 0018:ffff97a58145fd08 EFLAGS: 00010202 [ 102.749358] RAX: ffff901778b77070 RBX: 0000000000000000 RCX: 0000000000000040 [ 102.749360] RDX: 0000000000000040 RSI: 00000000deadbeef RDI: ffff901778b77070 [ 102.749362] RBP: ffff97a58145fd10 R08: ffff901760b67a70 R09: 0000000000000001 [ 102.749364] R10: ffff9017008e2cb8 R11: 0000000000000001 R12: ffff901760b67a70 [ 102.749366] R13: ffff901760b78f00 R14: 0000000000000003 R15: 0000000000000001 [ 102.749368] FS: 0000000000000000(0000) GS:ffff901876e00000(0000) knlGS:0000000000000000 [ 102.749372] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 102.749374] CR2: 00000000deadbeef CR3: 000000017c49a004 CR4: 0000000000770ef0 [ 102.749376] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 102.749378] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 102.749379] PKRU: 55555554 [ 102.749381] Call Trace: [ 102.749382] <TASK> [ 102.749383] ? send_args+0xb2/0xd0 [ 102.749389] send_common+0xb7/0xd0 [ 102.749395] _unlock_lock+0x2c/0x90 [ 102.749400] unlock_lock.isra.56+0x62/0xa0 [ 102.749405] dlm_unlock+0x21e/0x330 [ 102.749411] ? lock_torture_stats+0x80/0x80 [dlm_locktorture] [ 102.749416] torture_unlock+0x5a/0x90 [dlm_locktorture] [ 102.749419] ? preempt_count_sub+0xba/0x100 [ 102.749427] lock_torture_writer+0xbd/0x150 [dlm_locktorture] [ 102.786186] kthread+0x10a/0x130 [ 102.786581] ? kthread_complete_and_exit+0x20/0x20 [ 102.787156] ret_from_fork+0x22/0x30 [ 102.787588] </TASK> [ 102.787855] Modules linked in: dlm_locktorture torture rpcsec_gss_krb5 intel_rapl_msr intel_rapl_common kvm_intel iTCO_wdt iTCO_vendor_support kvm vmw_vsock_virtio_transport qxl irqbypass vmw_vsock_virtio_transport_common drm_ttm_helper crc32_pclmul joydev crc32c_intel ttm vsock virtio_scsi virtio_balloon snd_pcm drm_kms_helper virtio_console snd_timer snd drm soundcore syscopyarea i2c_i801 sysfillrect sysimgblt i2c_smbus pcspkr fb_sys_fops lpc_ich serio_raw [ 102.792536] CR2: 00000000deadbeef [ 102.792930] ---[ end trace 0000000000000000 ]--- This patch fixes the issue by checking also on DLM_LKF_VALBLK on exflags is set when copying the lvbptr array instead of if it's just null which fixes for me the issue. I think this patch can fix other dlm users as well, depending how they handle the init, freeing memory handling of sb_lvbptr and don't set DLM_LKF_VALBLK for some dlm_lock() calls. It might a there could be a hidden issue all the time. However with checking on DLM_LKF_VALBLK the user always need to provide a sb_lvbptr non-null value. There might be more intelligent handling between per ls lvblen, DLM_LKF_VALBLK and non-null to report the user the way how DLM API is used is wrong but can be added for later, this will only fix the current behaviour.

In the Linux kernel, the following vulnerability has been resolved: media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT Treat the NX bit as valid when using NPT, as KVM will set the NX bit when the NX huge page mitigation is enabled (mindblowing) and trigger the WARN that fires on reserved SPTE bits being set. KVM has required NX support for SVM since commit b26a71a1a5b9 ("KVM: SVM: Refuse to load kvm_amd if NX support is not available") for exactly this reason, but apparently it never occurred to anyone to actually test NPT with the mitigation enabled. ------------[ cut here ]------------ spte = 0x800000018a600ee7, level = 2, rsvd bits = 0x800f0000001fe000 WARNING: CPU: 152 PID: 15966 at arch/x86/kvm/mmu/spte.c:215 make_spte+0x327/0x340 [kvm] Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 RIP: 0010:make_spte+0x327/0x340 [kvm] Call Trace: <TASK> tdp_mmu_map_handle_target_level+0xc3/0x230 [kvm] kvm_tdp_mmu_map+0x343/0x3b0 [kvm] direct_page_fault+0x1ae/0x2a0 [kvm] kvm_tdp_page_fault+0x7d/0x90 [kvm] kvm_mmu_page_fault+0xfb/0x2e0 [kvm] npf_interception+0x55/0x90 [kvm_amd] svm_invoke_exit_handler+0x31/0xf0 [kvm_amd] svm_handle_exit+0xf6/0x1d0 [kvm_amd] vcpu_enter_guest+0xb6d/0xee0 [kvm] ? kvm_pmu_trigger_event+0x6d/0x230 [kvm] vcpu_run+0x65/0x2c0 [kvm] kvm_arch_vcpu_ioctl_run+0x355/0x610 [kvm] kvm_vcpu_ioctl+0x551/0x610 [kvm] __se_sys_ioctl+0x77/0xc0 __x64_sys_ioctl+0x1d/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> ---[ end trace 0000000000000000 ]---

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables.

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Check return value after calling platform_get_resource() platform_get_resource() may return NULL pointer, we need check its return value to avoid null-ptr-deref in resource_size().

In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: control built-in cs manually The coreQSPI IP supports only a single chip select, which is automagically operated by the hardware - set low when the transmit buffer first gets written to and set high when the number of bytes written to the TOTALBYTES field of the FRAMES register have been sent on the bus. Additional devices must use GPIOs for their chip selects. It was reported to me that if there are two devices attached to this QSPI controller that the in-built chip select is set low while linux tries to access the device attached to the GPIO. This went undetected as the boards that connected multiple devices to the SPI controller all exclusively used GPIOs for chip selects, not relying on the built-in chip select at all. It turns out that this was because the built-in chip select, when controlled automagically, is set low when active and high when inactive, thereby ruling out its use for active-high devices or devices that need to transmit with the chip select disabled. Modify the driver so that it controls chip select directly, retaining the behaviour for mem_ops of setting the chip select active for the entire duration of the transfer in the exec_op callback. For regular transfers, implement the set_cs callback for the core to use. As part of this, the existing setup callback, mchp_coreqspi_setup_op(), is removed. Modifying the CLKIDLE field is not safe to do during operation when there are multiple devices, so this code is removed entirely. Setting the MASTER and ENABLE fields is something that can be done once at probe, it doesn't need to be re-run for each device. Instead the new setup callback sets the built-in chip select to its inactive state for active-low devices, as the reset value of the chip select in software controlled mode is low.

In the Linux kernel, the following vulnerability has been resolved: orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() When insert and remove the orangefs module, there are memory leaked as below: unreferenced object 0xffff88816b0cc000 (size 2048): comm "insmod", pid 783, jiffies 4294813439 (age 65.512s) hex dump (first 32 bytes): 6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f [<00000000e5a0085b>] 0xffffffffa02780f9 [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Use the golbal variable as the buffer rather than dynamic allocate to slove the problem.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts Ensure SRB is returned during I/O timeout error escalation. If that is not possible fail the escalation path. Following crash stack was seen: BUG: unable to handle kernel paging request at 0000002f56aa90f8 IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx] Call Trace: ? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx] ? qla2x00_start_sp+0x116/0x1170 [qla2xxx] ? dma_pool_alloc+0x1d6/0x210 ? mempool_alloc+0x54/0x130 ? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx] ? qla_do_work+0x2d/0x40 [qla2xxx] ? process_one_work+0x14c/0x390

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix dummy res NULL ptr deref bug Check the bo->resource value before accessing the resource mem_type. v2: Fix commit description unwrapped warning <log snip> [ 40.191227][ T184] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI [ 40.192995][ T184] KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] [ 40.194411][ T184] CPU: 1 PID: 184 Comm: systemd-udevd Not tainted 5.19.0-rc4-00721-gb297c22b7070 #1 [ 40.196063][ T184] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 [ 40.199605][ T184] RIP: 0010:ttm_bo_validate+0x1b3/0x240 [ttm] [ 40.200754][ T184] Code: e8 72 c5 ff ff 83 f8 b8 74 d4 85 c0 75 54 49 8b 9e 58 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 3c 03 7e 44 8b 53 10 31 c0 85 d2 0f 85 58 [ 40.203685][ T184] RSP: 0018:ffffc900006df0c8 EFLAGS: 00010202 [ 40.204630][ T184] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1102f4bb71b [ 40.205864][ T184] RDX: 0000000000000002 RSI: ffffc900006df208 RDI: 0000000000000010 [ 40.207102][ T184] RBP: 1ffff920000dbe1a R08: ffffc900006df208 R09: 0000000000000000 [ 40.208394][ T184] R10: ffff88817a5f0000 R11: 0000000000000001 R12: ffffc900006df110 [ 40.209692][ T184] R13: ffffc900006df0f0 R14: ffff88817a5db800 R15: ffffc900006df208 [ 40.210862][ T184] FS: 00007f6b1d16e8c0(0000) GS:ffff88839d700000(0000) knlGS:0000000000000000 [ 40.212250][ T184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.213275][ T184] CR2: 000055a1001d4ff0 CR3: 00000001700f4000 CR4: 00000000000006e0 [ 40.214469][ T184] Call Trace: [ 40.214974][ T184] <TASK> [ 40.215438][ T184] ? ttm_bo_bounce_temp_buffer+0x140/0x140 [ttm] [ 40.216572][ T184] ? mutex_spin_on_owner+0x240/0x240 [ 40.217456][ T184] ? drm_vma_offset_add+0xaa/0x100 [drm] [ 40.218457][ T184] ttm_bo_init_reserved+0x3d6/0x540 [ttm] [ 40.219410][ T184] ? shmem_get_inode+0x744/0x980 [ 40.220231][ T184] ttm_bo_init_validate+0xb1/0x200 [ttm] [ 40.221172][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.222530][ T184] ? ttm_bo_init_reserved+0x540/0x540 [ttm] [ 40.223643][ T184] ? __do_sys_finit_module+0x11a/0x1c0 [ 40.224654][ T184] ? __shmem_file_setup+0x102/0x280 [ 40.234764][ T184] drm_gem_vram_create+0x305/0x480 [drm_vram_helper] [ 40.235766][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.236846][ T184] ? __kasan_slab_free+0x108/0x180 [ 40.237650][ T184] drm_gem_vram_fill_create_dumb+0x134/0x340 [drm_vram_helper] [ 40.238864][ T184] ? local_pci_probe+0xdf/0x180 [ 40.239674][ T184] ? drmm_vram_helper_init+0x400/0x400 [drm_vram_helper] [ 40.240826][ T184] drm_client_framebuffer_create+0x19c/0x400 [drm] [ 40.241955][ T184] ? drm_client_buffer_delete+0x200/0x200 [drm] [ 40.243001][ T184] ? drm_client_pick_crtcs+0x554/0xb80 [drm] [ 40.244030][ T184] drm_fb_helper_generic_probe+0x23f/0x940 [drm_kms_helper] [ 40.245226][ T184] ? __cond_resched+0x1c/0xc0 [ 40.245987][ T184] ? drm_fb_helper_memory_range_to_clip+0x180/0x180 [drm_kms_helper] [ 40.247316][ T184] ? mutex_unlock+0x80/0x100 [ 40.248005][ T184] ? __mutex_unlock_slowpath+0x2c0/0x2c0 [ 40.249083][ T184] drm_fb_helper_single_fb_probe+0x907/0xf00 [drm_kms_helper] [ 40.250314][ T184] ? drm_fb_helper_check_var+0x1180/0x1180 [drm_kms_helper] [ 40.251540][ T184] ? __cond_resched+0x1c/0xc0 [ 40.252321][ T184] ? mutex_lock+0x9f/0x100 [ 40.253062][ T184] __drm_fb_helper_initial_config_and_unlock+0xb9/0x2c0 [drm_kms_helper] [ 40.254394][ T184] drm_fbdev_client_hotplug+0x56f/0x840 [drm_kms_helper] [ 40.255477][ T184] drm_fbdev_generic_setup+0x165/0x3c0 [drm_kms_helper] [ 40.256607][ T184] bochs_pci_probe+0x6b7/0x900 [bochs] [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: genl: fix error path memory leak in policy dumping If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer.

In the Linux kernel, the following vulnerability has been resolved: coresight: cti: Fix hang in cti_disable_hw() cti_enable_hw() and cti_disable_hw() are called from an atomic context so shouldn't use runtime PM because it can result in a sleep when communicating with firmware. Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock management to the SCMI power domain""), this causes a hang on Juno when running the Perf Coresight tests or running this command: perf record -e cs_etm//u -- ls This was also missed until the revert commit because pm_runtime_put() was called with the wrong device until commit 692c9a499b28 ("coresight: cti: Correct the parameter for pm_runtime_put") With lock and scheduler debugging enabled the following is output: coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022 Call trace: dump_backtrace+0x134/0x140 show_stack+0x20/0x58 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x180/0x228 __might_sleep+0x50/0x88 __pm_runtime_resume+0xac/0xb0 cti_enable+0x44/0x120 coresight_control_assoc_ectdev+0xc0/0x150 coresight_enable_path+0xb4/0x288 etm_event_start+0x138/0x170 etm_event_add+0x48/0x70 event_sched_in.isra.122+0xb4/0x280 merge_sched_in+0x1fc/0x3d0 visit_groups_merge.constprop.137+0x16c/0x4b0 ctx_sched_in+0x114/0x1f0 perf_event_sched_in+0x60/0x90 ctx_resched+0x68/0xb0 perf_event_exec+0x138/0x508 begin_new_exec+0x52c/0xd40 load_elf_binary+0x6b8/0x17d0 bprm_execve+0x360/0x7f8 do_execveat_common.isra.47+0x218/0x238 __arm64_sys_execve+0x48/0x60 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.4+0xfc/0x120 do_el0_svc+0x34/0xc0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 Fix the issue by removing the runtime PM calls completely. They are not needed here because it must have already been done when building the path for a trace. [ Fix build warnings ]

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Add checks for devm_kcalloc As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference.

An issue was discovered in the Linux kernel through 5.16-rc6. uapi_finalize in drivers/infiniband/core/uverbs_uapi.c lacks check of kmalloc_array().

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list.

In the Linux kernel, the following vulnerability has been resolved: perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init() arm_smmu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak")

In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away.

In the Linux kernel, the following vulnerability has been resolved: iio: light: isl29028: Fix the warning in isl29028_remove() The driver use the non-managed form of the register function in isl29028_remove(). To keep the release order as mirroring the ordering in probe, the driver should use non-managed form in probe, too. The following log reveals it: [ 32.374955] isl29028 0-0010: remove [ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI [ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0 [ 32.385461] Call Trace: [ 32.385807] sysfs_unmerge_group+0x59/0x110 [ 32.386110] dpm_sysfs_remove+0x58/0xc0 [ 32.386391] device_del+0x296/0xe50 [ 32.386959] cdev_device_del+0x1d/0xd0 [ 32.387231] devm_iio_device_unreg+0x27/0xb0 [ 32.387542] devres_release_group+0x319/0x3d0 [ 32.388162] i2c_device_remove+0x93/0x1f0

In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215)

In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains() of_get_child_by_name() returns a node pointer with refcount incremented, so we should use of_node_put() on it when we don't need it anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Allow waiting for commands to complete on removed device When a SCSI device is removed while in active use, currently sg will immediately return -ENODEV on any attempt to wait for active commands that were sent before the removal. This is problematic for commands that use SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel when userspace frees or reuses it after getting ENODEV, leading to corrupted userspace memory (in the case of READ-type commands) or corrupted data being sent to the device (in the case of WRITE-type commands). This has been seen in practice when logging out of a iscsi_tcp session, where the iSCSI driver may still be processing commands after the device has been marked for removal. Change the policy to allow userspace to wait for active sg commands even when the device is being removed. Return -ENODEV only when there are no more responses to read.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Don't BUG if userspace injects an interrupt with GIF=0 Don't BUG/WARN on interrupt injection due to GIF being cleared, since it's trivial for userspace to force the situation via KVM_SET_VCPU_EVENTS (even if having at least a WARN there would be correct for KVM internally generated injections). kernel BUG at arch/x86/kvm/svm/svm.c:3386! invalid opcode: 0000 [#1] SMP CPU: 15 PID: 926 Comm: smm_test Not tainted 5.17.0-rc3+ #264 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:svm_inject_irq+0xab/0xb0 [kvm_amd] Code: <0f> 0b 0f 1f 00 0f 1f 44 00 00 80 3d ac b3 01 00 00 55 48 89 f5 53 RSP: 0018:ffffc90000b37d88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88810a234ac0 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffc90000b37df7 RDI: ffff88810a234ac0 RBP: ffffc90000b37df7 R08: ffff88810a1fa410 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888109571000 R14: ffff88810a234ac0 R15: 0000000000000000 FS: 0000000001821380(0000) GS:ffff88846fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f74fc550008 CR3: 000000010a6fe000 CR4: 0000000000350ea0 Call Trace: <TASK> inject_pending_event+0x2f7/0x4c0 [kvm] kvm_arch_vcpu_ioctl_run+0x791/0x17a0 [kvm] kvm_vcpu_ioctl+0x26d/0x650 [kvm] __x64_sys_ioctl+0x82/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK>

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix NULL pointer dereference in iavf_get_link_ksettings Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretem ---truncated---

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix mcam entry resource leak The teardown sequence in FLR handler returns if no NIX LF is attached to PF/VF because it indicates that graceful shutdown of resources already happened. But there is a chance of all allocated MCAM entries not being freed by PF/VF. Hence free mcam entries even in case of detached LF.

In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() As comment of pci_get_device() says, it returns a pci_device with its refcount increased. We need to call pci_dev_put() to decrease the refcount. Save the return value of pci_get_device() and call pci_dev_put() to decrease the refcount.

In the Linux kernel, the following vulnerability has been resolved: ARC: mm: fix leakage of memory allocated for PTE Since commit d9820ff ("ARC: mm: switch pgtable_t back to struct page *") a memory leakage problem occurs. Memory allocated for page table entries not released during process termination. This issue can be reproduced by a small program that allocates a large amount of memory. After several runs, you'll see that the amount of free memory has reduced and will continue to reduce after each run. All ARC CPUs are effected by this issue. The issue was introduced since the kernel stable release v5.15-rc1. As described in commit d9820ff after switch pgtable_t back to struct page *, a pointer to "struct page" and appropriate functions are used to allocate and free a memory page for PTEs, but the pmd_pgtable macro hasn't changed and returns the direct virtual address from the PMD (PGD) entry. Than this address used as a parameter in the __pte_free() and as a result this function couldn't release memory page allocated for PTEs. Fix this issue by changing the pmd_pgtable macro and returning pointer to struct page.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom-adm: fix wrong sizeof config in slave_config Fix broken slave_config function that uncorrectly compare the peripheral_size with the size of the config pointer instead of the size of the config struct. This cause the crci value to be ignored and cause a kernel panic on any slave that use adm driver. To fix this, compare to the size of the struct and NOT the size of the pointer.

In the Linux kernel, the following vulnerability has been resolved: drivers/md/md-bitmap: check the return value of md_bitmap_get_counter() Check the return value of md_bitmap_get_counter() in case it returns NULL pointer, which will result in a null pointer dereference. v2: update the check to include other dereference

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix memory leak in _samsung_clk_register_pll() If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

In the Linux kernel, the following vulnerability has been resolved: media: coda: Add check for dcoda_iram_alloc As the coda_iram_alloc may return NULL pointer, it should be better to check the return value in order to avoid NULL poineter dereference, same as the others.

In the Linux kernel, the following vulnerability has been resolved: mm: /proc/pid/smaps_rollup: fix no vma's null-deref Commit 258f669e7e88 ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") introduced a null-deref if there are no vma's in the task in show_smaps_rollup.

In the Linux kernel, the following vulnerability has been resolved: media: i2c: hi846: Fix memory leak in hi846_parse_dt() If any of the checks related to the supported link frequencies fail, then the V4L2 fwnode resources don't get released before returning, which leads to a memleak. Fix this by properly freeing the V4L2 fwnode data in a designated label.

In the Linux kernel, the following vulnerability has been resolved: memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe() The break of for_each_available_child_of_node() needs a corresponding of_node_put() when the reference 'child' is not used anymore. Here we do not need to call of_node_put() in fail path as '!match' means no break. While the of_platform_device_create() will created a new reference by 'child' but it has considered the refcounting.

In the Linux kernel, the following vulnerability has been resolved: vme: Fix error not catched in fake_init() In fake_init(), __root_device_register() is possible to fail but it's ignored, which can cause unregistering vme_root fail when exit. general protection fault, probably for non-canonical address 0xdffffc000000008c KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467] RIP: 0010:root_device_unregister+0x26/0x60 Call Trace: <TASK> __x64_sys_delete_module+0x34f/0x540 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Return error when __root_device_register() fails.

In the Linux kernel, the following vulnerability has been resolved: regulator: of: Fix refcount leak bug in of_get_regulation_constraints() We should call the of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount.

In the Linux kernel, the following vulnerability has been resolved: xfrm: fix refcount leak in __xfrm_policy_check() The issue happens on an error path in __xfrm_policy_check(). When the fetching process of the object `pols[1]` fails, the function simply returns 0, forgetting to decrement the reference count of `pols[0]`, which is incremented earlier by either xfrm_sk_policy_lookup() or xfrm_policy_lookup(). This may result in memory leaks. Fix it by decreasing the reference count of `pols[0]` in that path.

In the Linux kernel, the following vulnerability has been resolved: MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create() In error case in bridge_platform_create after calling platform_device_add()/platform_device_add_data()/ platform_device_add_resources(), release the failed 'pdev' or it will be leak, call platform_device_put() to fix this problem. Besides, 'pdev' is divided into 'pdev_wd' and 'pdev_bd', use platform_device_unregister() to release sgi_w1 resources when xtalk-bridge registration fails.

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter() If device_register() fails in cxl_pci_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

In the Linux kernel, the following vulnerability has been resolved: tee: add overflow check in register_shm_helper() With special lengths supplied by user space, register_shm_helper() has an integer overflow when calculating the number of pages covered by a supplied user space memory region. This causes internal_get_user_pages_fast() a helper function of pin_user_pages_fast() to do a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Modules linked in: CPU: 1 PID: 173 Comm: optee_example_a Not tainted 5.19.0 #11 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pc : internal_get_user_pages_fast+0x474/0xa80 Call trace: internal_get_user_pages_fast+0x474/0xa80 pin_user_pages_fast+0x24/0x4c register_shm_helper+0x194/0x330 tee_shm_register_user_buf+0x78/0x120 tee_ioctl+0xd0/0x11a0 __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 Fix this by adding an an explicit call to access_ok() in tee_shm_register_user_buf() to catch an invalid user space address early.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: Deallocate EPC memory on dw_pcie_ep_init() errors If dw_pcie_ep_init() fails to perform any action after the EPC memory is initialized and the MSI memory region is allocated, the latter parts won't be undone thus causing a memory leak. Add a cleanup-on-error path to fix these leaks. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix bridge lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP bridges, previously allocated bridges will leak on probe deferral. Fix this by amending the DP parser interface and tying the lifetime of the bridge device to the DRM device rather than DP platform device. Patchwork: https://patchwork.freedesktop.org/patch/502667/

In the Linux kernel, the following vulnerability has been resolved: ARM: bcm: Fix refcount leak in bcm_kona_smc_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: media: airspy: fix memory leak in airspy probe The commit ca9dc8d06ab6 ("media: airspy: respect the DMA coherency rules") moves variable buf from stack to heap, however, it only frees buf in the error handling code, missing deallocation in the success path. Fix this by freeing buf in the success path since this variable does not have any references in other code.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix potential 32-bit overflow when accessing ARRAY map element If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Fix broken touchscreen on Chuwi Hi8 with Windows BIOS The x86-android-tablets handling for the Chuwi Hi8 is only necessary with the Android BIOS and it is causing problems with the Windows BIOS version. Specifically when trying to register the already present touchscreen x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks the working of the touchscreen and also leads to an oops: [ 14.248946] ------------[ cut here ]------------ [ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00' [ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry ... [ 14.249293] unregister_irq_proc+0xe0/0x100 [ 14.249305] free_desc+0x29/0x70 [ 14.249312] irq_free_descs+0x4b/0x80 [ 14.249320] mp_unmap_irq+0x5c/0x60 [ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40 [ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets] [ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets] Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS is in use and exits with -ENODEV in that case, fixing this.