Genexis PLATINUM 4410 2.1 P4410-V2-1.28 devices allow remote attackers to execute arbitrary code via shell metacharacters to sys_config_valid.xgi, as demonstrated by the sys_config_valid.xgi?exeshell=%60telnetd%20%26%60 URI.

An improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet allows attacker to execute unauthorized code or commands via via crafted API requests.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the wakeup_mac parameter in the Wake-On-LAN (WoL) function. This vulnerability is exploited via a crafted payload.

An issue in PGYER codefever v.2023.8.14-2ce4006 allows a remote attacker to execute arbitrary code via a crafted request to the branchList component.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability via the Hostname parameter within the WAN settings. This vulnerability is exploited via a crafted payload.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023. This affects the function setDiagnosisCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237513 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Zoho ManageEngine ADSelfService Plus through 6101 is vulnerable to unauthenticated Remote Code Execution while changing the password.

The @ronomon/opened library before 1.5.2 is vulnerable to a command injection vulnerability which would allow a remote attacker to execute commands on the system if the library was used with untrusted input.

A command injection vulnerabilities have been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. This issue affects: QNAP Systems Inc. QTS versions prior to 4.5.1.1540 build 20210107. QNAP Systems Inc. QuTS hero versions prior to h4.5.1.1582 build 20210217.

TOTOLINK X18 V9.1.0cu.2053_B20230309 was discovered to contain a command injection vulnerability via the mac parameter in the setEasyMeshAgentCfg function.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the hostName parameter in the setWanCfg function.

Remote Code Execution in cominput.jsp and comoutput.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote unauthenticated users to inject and execute arbitrary system commands via the unsanitized user-controlled "command" and "commandvalues" parameters.

Dell RecoverPoint for Virtual Machines 5.3.x, 6.0.SP1 contains an OS Command injection vulnerability. An unauthenticated remote attacker could potentially exploit this vulnerability, leading to execute arbitrary operating system commands, which will get executed in the context of the root user, resulting in a complete system compromise.

rakibtg Docker Dashboard before 2021-02-28 allows command injection in backend/utilities/terminal.js via shell metacharacters in the command parameter of an API request. NOTE: this is NOT a Docker, Inc. product.

NextGen Healthcare Mirth Connect before version 4.4.1 is vulnerable to unauthenticated remote code execution. Note that this vulnerability is caused by the incomplete patch of CVE-2023-37679.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the ip parameter in the setDmzCfg function.

Several high privileged APIs on the Vizio P65-F1 6.0.31.4-2 and E50x-E1 10.0.31.4-2 Smart TVs do not enforce access controls, allowing an unauthenticated threat actor to access privileged functionality, leading to OS command execution. The specific attack methodology is a file upload.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the minute parameter in the setScheduleCfg function.

An OS command injection vulnerability exists in Akaunting v3.1.3 and earlier. An attacker can manipulate the company locale when installing an app to execute system commands on the hosting server.

A vulnerability in the parisneo/lollms-webui version 9.3 allows attackers to bypass intended access restrictions and execute arbitrary code. The issue arises from the application's handling of the `/execute_code` endpoint, which is intended to be blocked from external access by default. However, attackers can exploit the `/update_setting` endpoint, which lacks proper access control, to modify the `host` configuration at runtime. By changing the `host` setting to an attacker-controlled value, the restriction on the `/execute_code` endpoint can be bypassed, leading to remote code execution. This vulnerability is due to improper neutralization of special elements used in an OS command (`Improper Neutralization of Special Elements used in an OS Command`).

Discord-Recon is a bot for the Discord chat service. Versions of Discord-Recon 0.0.3 and prior contain a vulnerability in which a remote attacker is able to overwrite any file on the system with the command results. This can result in remote code execution when the user overwrite important files on the system. As a workaround, bot maintainers can edit their `setting.py` file then add `<` and `>` into the `RCE` variable inside of it to fix the issue without an update. The vulnerability is patched in version 0.0.4.

An issue in franfinance before v.2.0.27 allows a remote attacker to execute arbitrary code via the validation.php, and controllers/front/validation.php components.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the username parameter in the setDdnsCfg function.

Addressed remote code execution vulnerability in cgi_api.php that allowed escalation of privileges in Western Digital My Cloud NAS devices prior to 5.04.114.

The gnuplot package prior to version 0.1.0 for Node.js allows code execution via shell metacharacters in Gnuplot commands.

yt-dlp is a youtube-dl fork with additional features and fixes. The patch that addressed CVE-2023-40581 attempted to prevent RCE when using `--exec` with `%q` by replacing double quotes with two double quotes. However, this escaping is not sufficient, and still allows expansion of environment variables. Support for output template expansion in `--exec`, along with this vulnerable behavior, was added to `yt-dlp` in version 2021.04.11. yt-dlp version 2024.04.09 fixes this issue by properly escaping `%`. It replaces them with `%%cd:~,%`, a variable that expands to nothing, leaving only the leading percent. It is recommended to upgrade yt-dlp to version 2024.04.09 as soon as possible. Also, always be careful when using `--exec`, because while this specific vulnerability has been patched, using unvalidated input in shell commands is inherently dangerous. For Windows users who are not able to upgrade, avoid using any output template expansion in `--exec` other than `{}` (filepath); if expansion in `--exec` is needed, verify the fields you are using do not contain `"`, `|` or `&`; and/or instead of using `--exec`, write the info json and load the fields from it instead.

An Improper Input Validation vulnerability in Zscaler Client Connector on MacOS allows OS Command Injection. This issue affects Zscaler Client Connector on MacOS <4.2.

Command Injection in TOTOLINK X5000R router with firmware v9.1.0u.6118_B20201102, and TOTOLINK A720R router with firmware v4.1.5cu.470_B20200911 allows remote attackers to execute arbitrary OS commands by sending a modified HTTP request. This occurs because the function executes glibc's system function with untrusted input. In the function, "command" parameter is directly passed to the attacker, allowing them to control the "command" field to attack the OS.

D-link DIR-816 A2 v1.10 is affected by a remote code injection vulnerability. An HTTP request parameter can be used in command string construction in the handler function of the /goform/dir_setWanWifi, which can lead to command injection via shell metacharacters in the statuscheckpppoeuser parameter.

TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the pass parameter in the setTr069Cfg function.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Enphase IQ Gateway (formerly known as Envoy) allows OS Command Injection. This vulnerability is present in an internal script.This issue affects Envoy: from 4.x up to and including 8.x and is currently unpatched.

Command injection vulnerability in Asus RT-N15U 3.0.0.4.376_3754 allows a remote attacker to execute arbitrary code via the netstat function page.

Zavio CF7500, CF7300, CF7201, CF7501, CB3211, CB3212, CB5220, CB6231, B8520, B8220, and CD321 IP Cameras with firmware version M2.1.6.05 has a command injection vulnerability in their implementation of their binaries and handling of network requests.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setWiFiWpsCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

Command Injection in Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted "action/umountUSBPartition" request. This occurs because the "formSetUSBPartitionUmount" function executes the "doSystemCmd" function with untrusted input.

In VembuBDR before 4.2.0.1 and VembuOffsiteDR before 4.2.0.1 installed on Windows, the http API located at /consumerweb/secure/download.php. Using this command argument an unauthenticated attacker can execute arbitrary OS commands with SYSTEM privileges.

Yealink Device Management (DM) 3.6.0.20 allows command injection as root via the /sm/api/v1/firewall/zone/services URI, without authentication.

An OS command injection was found in SecuwaySSL, when special characters injection on execute command with runCommand arguments.

Accellion FTA 9_12_370 and earlier is affected by OS command execution via a crafted POST request to various admin endpoints. The fixed version is FTA_9_12_380 and later.

Command Injection in Tenda G0 routers with firmware versions v15.11.0.6(9039)_CN and v15.11.0.5(5876)_CN , and Tenda G1 and G3 routers with firmware versions v15.11.0.17(9502)_CN or v15.11.0.16(9024)_CN allows remote attackers to execute arbitrary OS commands via a crafted action/setDebugCfg request. This occurs because the "formSetDebugCfg" function executes glibc's system function with untrusted input.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in delBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.

Netis WF2780 2.3.40404 and WF2411 1.1.29629 devices allow Shell Metacharacter Injection into the ping command, leading to remote code execution.

An exploitable unatuhenticated command injection exists in the OpenClinic GA 5.173.3. Specially crafted web requests can cause commands to be executed on the server. An attacker can send a web request with parameters containing specific parameter to trigger this vulnerability, potentially allowing exfiltration of the database, user credentials and compromise underlying operating system.

systeminformation is an npm package that provides system and OS information library for node.js. In systeminformation before version 4.26.2 there is a command injection vulnerability. Problem was fixed in version 4.26.2 with a shell string sanitation fix.

A flaw was found in the REST API in StarWind Stack. REST command, which manipulates a virtual disk, doesn’t check input parameters. Some of them go directly to bash as part of a script. An attacker with non-root user access can inject arbitrary data into the command that will be executed with root privileges. This affects StarWind SAN and NAS v0.2 build 1633.

An issue was discovered in D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/addRouting route. This could lead to Command Injection via Shell Metacharacters.

A vulnerability exists in the SaveConfigFile function of the RACompare Service, which may allow for OS command injection. This vulnerability may allow a remote, unauthenticated attacker to execute arbitrary commands in Rockwell Automation FactoryTalk AssetCentre v10.00 and earlier.

Dasan Networks - W-Web versions 1.22-1.27 - CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')

EPrints 3.4.2 allows remote attackers to execute OS commands via crafted LaTeX input to a cgi/cal?year= URI.

An issue in the handler function in /goform/telnet of Tenda FH1206 v02.03.01.35 allows attackers to execute arbitrary commands via a crafted HTTP request.