An issue was discovered in the Tightrope Media Carousel digital signage product 7.0.4.104. Due to insecure default permissions on the C:\TRMS\Services directory, an attacker who has gained access to the system can elevate their privileges from a restricted account to full SYSTEM by replacing the Carousel.Service.exe file with a custom malicious executable. This service is independent of the associated IIS web site, which means that this service can be manipulated by an attacker without losing access to vulnerabilities in the web interface (which would potentially be used in conjunction with this attack, to control the service). Once the attacker has replaced Carousel.Service.exe, the server can be restarted using the command "shutdown -r -t 0" from a web shell, causing the system to reboot and launching the malicious Carousel.Service.exe as SYSTEM on startup. If this malicious Carousel.Service.exe is configured to launch a reverse shell back to the attacker, then upon reboot the attacker will have a fully privileged remote command-line environment to manipulate the system further.

A privilege escalation vulnerability was identified in Nessus versions 8.10.1 through 8.15.8 and 10.0.0 through 10.4.1. An authenticated attacker could potentially execute a specially crafted file to obtain root or NT AUTHORITY / SYSTEM privileges on the Nessus host.

As part of our Security Development Lifecycle, a potential privilege escalation issue was identified internally. This could allow a malicious actor with sufficient permissions to modify environment variables and abuse an impacted plugin in order to escalate privileges. We have resolved the issue and also made several defense-in-depth fixes alongside. While the probability of successful exploitation is low, Tenable is committed to securing our customers’ environments and our products. The updates have been distributed via the Tenable plugin feed in feed serial numbers equal to or greater than #202212212055.

The Post Form – Registration Form – Profile Form for User Profiles – Frontend Content Forms for User Submissions (UGC) plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 2.8.11. This is due to plugin not properly restricting what users have access to set the default role on registration forms. This makes it possible for authenticated attackers, with contributor-level access and above, to create a registration form with a custom role that allows them to register as administrators.

A vulnerability, which was classified as critical, was found in MONyog Ultimate 6.63. This affects an unknown part of the component Cookie Handler. The manipulation of the argument HasServerEdit/IsAdmin leads to privilege escalation. It is possible to initiate the attack remotely.

The Elegant Themes Monarch plugin before 1.2.7 for WordPress has privilege escalation.

PhoneSystem Terminal in 3CX Phone System (Debian based installation) 16.0.0.1570 allows an attacker to gain root privileges by using sudo with the tcpdump command, without a password. This occurs because the -z (aka postrotate-command) option to tcpdump can be unsafe when used in conjunction with sudo.

The parse_cmd function in lib/gitlab_shell.rb in GitLab 5.0 before 5.4.2, Community Edition before 6.2.4, and Enterprise Edition before 6.2.1 and gitlab-shell before 1.7.8 allows remote authenticated users to gain privileges and clone arbitrary repositories.

Hikvision DS-2CD7153-E IP Camera has Privilege Escalation

Improper Privilege Management in GitHub repository usememos/memos prior to 0.9.1.

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. User accounts created through the web interface of the device, when given non-admin level privileges, have the same level of privileged access as administrators when connecting to the device via SSH (while their permissions via the web interface are in fact restricted). This allows normal users to obtain the administrative password by running the tech-support command via the CLI: this contains the encrypted passwords for all users on the device. As these passwords are encrypted using well-known and static parameters, they can be decrypted and the original passwords (including the administrator password) can be obtained.

Networking OS10, versions prior to October 2021 with RESTCONF API enabled, contains a privilege escalation vulnerability. A malicious low privileged user with specific access to the API could potentially exploit this vulnerability to gain admin privileges on the affected system.

A privilege escalation vulnerability in the administrative user interface of CA Technologies CA Strong Authentication 9.0.x, 8.2.x, 8.1.x, 8.0.x, 7.1.x and CA Risk Authentication 9.0.x, 8.2.x, 8.1.x, 8.0.x, 3.1.x allows an authenticated attacker to gain additional privileges in some cases where an account has customized and limited privileges.

AVEVA Wonderware System Platform 2017 Update 2 and prior uses an ArchestrA network user account for authentication of system processes and inter-node communications. A user with low privileges could make use of an API to obtain the credentials for this account.

A vulnerability was found in moodle before versions 3.6.3, 3.5.5 and 3.4.8. Users could assign themselves an escalated role within courses or content accessed via LTI, by modifying the request to the LTI publisher site.

After installing the IBM Maximo Health- Safety and Environment Manager 7.6.1, a user is granted additional privileges that they are not normally allowed to access. IBM X-Force ID: 165948.

Information Disclosure vulnerability in McAfee Advanced Threat Defense (ATD prior to 4.8 allows remote authenticated attackers to gain access to ePO as an administrator via using the atduser credentials, which were too permissive.

A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.

Privilege escalation vulnerability in McAfee Web Gateway (MWG) prior to 9.2.8 allows an authenticated user to gain elevated privileges through the User Interface and execute commands on the appliance via incorrect improper neutralization of user input in the troubleshooting page.

On Netis DL4323 devices, any user role can view sensitive information, such as a user password or the FTP password, via the form2saveConf.cgi page.

BMC Control-M/Agent 7.0.00.000 has an Insecure File Copy.

An issue was discovered in Veritas NetBackup Flex Scale through 3.0. An attacker with non-root privileges may escalate privileges to root by using specific commands.

The My Tickets – Accessible Event Ticketing plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 2.0.16. This is due to the mt_save_profile() function not appropriately restricting access to unauthorized users to update roles. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update their role to that of an administrator.

The WPC Admin Columns plugin for WordPress is vulnerable to privilege escalation in versions 2.0.6 to 2.1.0. This is due to the plugin not properly restricting user meta values that can be updated through the ajax_edit_save() function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update their role to that of an administrator.

A privilege escalation vulnerability in ZOOM Call Recording 6.3.1 allows its user account (i.e., the account under which the program runs - by default, the callrec account) to elevate privileges to root by abusing the callrec-rs@.service. The callrec-rs@.service starts the /opt/callrec/bin/rs binary with root privileges, and this binary is owned by callrec. It can be replaced by a Trojan horse.

A vulnerability in the authorization subsystem of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to improper validation of user privileges of web UI users. An attacker could exploit this vulnerability by submitting a malicious payload to a specific endpoint in the web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

An privilege escalation issue was discovered in Gitlab versions < 12.1.2, < 12.0.4, and < 11.11.6 when Mattermost slash commands are used with a blocked account.

Enigma NMS 65.0.0 and prior allows administrative users to create low-privileged accounts that do not have the ability to modify any settings in the system, only view the components. However, it is possible for a low-privileged user to perform all actions as an administrator by bypassing authorization controls and sending requests to the server in the context of an administrator.

An issue was discovered in slicer69 doas before 6.2 on certain platforms other than OpenBSD. A setusercontext(3) call with flags to change the UID, primary GID, and secondary GIDs was replaced (on certain platforms: Linux and possibly NetBSD) with a single setuid(2) call. This resulted in neither changing the group id nor initializing secondary group ids.

A flaw was found during the upgrade of an existing OpenShift Container Platform 3.x cluster. Using CRI-O, the dockergc service account is assigned to the current namespace of the user performing the upgrade. This flaw can allow an unprivileged user to escalate their privileges to those allowed by the privileged Security Context Constraints.

SITOS six Build v6.2.1 allows a user with the user role of Seminar Coordinator to escalate their permission to the Systemadministrator role due to insufficient checks on the server side.

Bitbucket Server and Bitbucket Data Center from version 4.13. before 5.16.11, from version 6.0.0 before 6.0.11, from version 6.1.0 before 6.1.9, from version 6.2.0 before 6.2.7, from version 6.3.0 before 6.3.6, from version 6.4.0 before 6.4.4, from version 6.5.0 before 6.5.3, from version 6.6.0 before 6.6.3, from version 6.7.0 before 6.7.3, from version 6.8.0 before 6.8.2, from version 6.9.0 before 6.9.1 had a Remote Code Execution vulnerability via the edit-file request. A remote attacker with write permission on a repository can write to any arbitrary file to the victims Bitbucket Server or Bitbucket Data Center instance using the edit-file endpoint, if the user has Bitbucket Server or Bitbucket Data Center running, and has the permission to write the file at that destination. In some cases, this can result in execution of arbitrary code by the victims Bitbucket Server or Bitbucket Data Center instance.

A vulnerability classified as critical was found in Axios Italia Axios RE 1.7.0/7.0.0. This vulnerability affects unknown code of the file REDefault.aspx of the component Connection Handler. The manipulation of the argument DBIDX leads to privilege escalation. The attack can be initiated remotely.

A vulnerability in the user profile update component found in the ~/src/Classes/EditUserProfile.php file of the ProfilePress WordPress plugin made it possible for users to escalate their privileges to that of an administrator while editing their profile. This issue affects versions 3.0.0 - 3.1.3. .

Vulnerability in the Oracle Communications Convergence product of Oracle Communications Applications (component: Admin Configuration). The supported version that is affected is 3.0.3.1.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Communications Convergence. Successful attacks of this vulnerability can result in takeover of Oracle Communications Convergence. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).

Improper privilege management vulnerability in cgi component in Synology Download Station before 3.8.16-3566 allows remote authenticated users to execute arbitrary code via unspecified vectors.

A vulnerability in the web UI of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and create, read, update, or delete records and settings in multiple functions. This vulnerability is due to insufficient authorization of the System User and System Operator role capabilities. An attacker could exploit this vulnerability by directly accessing a web resource. A successful exploit could allow the attacker to create, read, update, or delete records and settings in multiple functions without the necessary permissions on the web UI.

The Vehica Core plugin for WordPress, used by the Vehica - Car Dealer & Listing WordPress Theme, is vulnerable to privilege escalation in all versions up to, and including, 1.0.97. This is due to the plugin not properly validating user meta fields prior to updating them in the database. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change escalate their privileges to Administrator.

<p>A remote code execution vulnerability exists when the Windows Print Spooler service improperly performs privileged file operations. An attacker who successfully exploited this vulnerability could run arbitrary code with SYSTEM privileges. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.</p> <p><strong>UPDATE</strong> August 10, 2021: Microsoft has completed the investigation and has released security updates to address this vulnerability. Please see the Security Updates table for the applicable update for your system. We recommend that you install these updates immediately. This security update changes the Point and Print default behavior; please see <a href="https://support.microsoft.com/help/5005652">KB5005652</a>.</p>

An issue was discovered in Comelit "App lejos de casa (web)" 2.8.0. It allows privilege escalation via modified domus and logged fields, related to js/bridge.min.js and login.json. For example, an attacker can achieve high privileges (installer or administrator) for the graphical interface via a 1C000000000S value for domus, in conjunction with a zero value for logged.

The Elegant Themes Bloom plugin before 1.1.1 for WordPress has privilege escalation.

The peepso-core plugin before 1.6.1 for WordPress has PeepSoProfilePreferencesAjax->save() privilege escalation.

An issue was discovered in ThingsBoard 3.4.1, allows low privileged attackers (CUSTOMER_USER) to gain escalated privileges (vertically) and become an Administrator (TENANT_ADMIN) or (SYS_ADMIN) on the web application. It is important to note that in order to accomplish this, the attacker must know the corresponding API's parameter (authority : value).

Cloudera Manager 5.8.x before 5.8.5, 5.9.x before 5.9.2, and 5.10.x before 5.10.1 allows a read-only Cloudera Manager user to discover the usernames of other users and elevate the privileges of those users.

Successful exploitation of this vulnerability could give an authenticated Metasys user an unintended level of access to the server file system, allowing them to access or modify system files by sending specifically crafted web messages to the Metasys system. This issue affects: Johnson Controls Metasys version 11.0 and prior versions.

The Elegant Themes Extra theme before 1.2.4 for WordPress has privilege escalation.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.1002 Application 20.0.2614 allows Privilege Escalation V-2024-015.

Escalation of privileges in the Web Server in Ironman Software PowerShell Universal 2.x and 3.x allows an attacker with a valid app token to retrieve other app tokens by ID via an HTTP web request. Patched Versions are 3.5.3, 3.4.7, and 2.12.6.

In ConsoleKit before 0.4.2, an intended security policy restriction bypass was found. This flaw allows an authenticated system user to escalate their privileges by initiating a remote VNC session.

Unauth. Privilege Escalation vulnerability in ARMember premium plugin <= 5.5.1 on WordPress.