A high privileged remote attacker can execute arbitrary system commands via POST requests in the send_sms action due to improper neutralization of special elements used in an OS command.

Guangzhou 1GE ONU V2801RW 1.9.1-181203 through 2.9.0-181024 and V2804RGW 1.9.1-181203 through 2.9.0-181024 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the boaform/admin/formPing Dest IP Address field.

functions_netflow.php in Artica Pandora FMS 7.0 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the index.php?operation/netflow/nf_live_view ip_dst, dst_port, or src_port parameter, a different vulnerability than CVE-2019-20224.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2790 build 20240606 and later

ActiveX Control(HShell.dll) in Handy Groupware 1.7.3.1 for Windows 7, 8, and 10 allows an attacker to execute arbitrary command via the ShellExec method.

Pi-hole Web v4.3.2 (aka AdminLTE) allows Remote Code Execution by privileged dashboard users via a crafted DHCP static lease.

MultiTech Conduit MTCDT-LVW2-24XX 1.4.17-ocea-13592 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Debug Options page and entering shell metacharacters in the interface JSON field of the ping function.

Some Hikvision Wireless Access Point are vulnerable to authenticated remote command execution due to insufficient input validation. Attackers with valid credentials can exploit this flaw by sending crafted packets containing malicious commands to affected devices, leading to arbitrary command execution.

Ruckus ZoneFlex R500 104.0.0.0.1347 devices allow an authenticated attacker to execute arbitrary OS commands via the hidden /forms/nslookupHandler form, as demonstrated by the nslookuptarget=|cat${IFS} substring.

This affects the package json before 10.0.0. It is possible to inject arbritary commands using the parseLookup function.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

A vulnerability classified as critical was found in westboy CicadasCMS 2.0. This vulnerability affects unknown code of the file /system/schedule/save of the component Scheduled Task Handler. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system.

A vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN Gateways Command Line Interface that allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation of this vulnerability will result in the ability to execute arbitrary commands as root on the underlying operating system.

A command injection vulnerability has been identified in the command line interface of the HPE Aruba Networking Airwave Platform. An authenticated attacker could exploit this vulnerability to execute arbitrary operating system commands with elevated privileges on the underlying operating system.

D-Link DCH-M225 1.05b01 and earlier devices allow remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the media renderer name.

Advantech WebAccess/VPN versions prior to 1.1.5 contain a command injection vulnerability in AppManagementController.appUpgradeAction() that allows an authenticated system administrator to execute arbitrary commands as the web server user (www-data) by supplying a crafted uploaded filename.

An OS command injection vulnerability exists in the OptiLink ONT1GEW GPON router firmware version V2.1.11_X101 Build 1127.190306 and earlier. The router’s web management interface fails to properly sanitize user input in the target_addr parameter of the formTracert and formPing administrative endpoints. An authenticated attacker can inject arbitrary operating system commands, which are executed with root privileges, leading to remote code execution. Successful exploitation enables full compromise of the device. Exploitation evidence was observed by the Shadowserver Foundation on 2025-02-04 UTC.

An OS command injection issue exists in multiple versions of TB-eye network recorders and AHD recorders. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who is logging in to the device.

An authenticated command injection vulnerability exists in the Beward N100 IP Camera firmware version M2.1.6.04C014 via the ServerName and TimeZone parameters in the servetest CGI page. An attacker with access to the web interface can inject arbitrary system commands into these parameters, which are unsafely embedded into backend system calls without proper input sanitization. Successful exploitation results in remote code execution with root privileges. Exploitation evidence was observed by the Shadowserver Foundation on 2024-12-02 UTC.

Sage X3 System CHAINE Variable Script Command Injection. An authenticated user with developer access can pass OS commands via this variable used by the web application. Note, this developer configuration should not be deployed in production.

A vulnerability in SMA100 allows a remote authenticated attacker with SSLVPN admin privileges can with admin privileges can inject shell command arguments to upload a file on the appliance.

A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x

An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios.

A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).

AdTran 834-5 HDC17600021F1 (SmartOS 11.1.1.1) devices enable the SSH service by default and have a hidden, undocumented, hard-coded support account whose password is based on the devices MAC address. All of the devices internet interfaces share a similar MAC address that only varies in their final octet. This allows network-adjacent attackers to derive the support user's SSH password by decrementing the final octet of the connected gateway address or via the BSSID. An attacker can then execute arbitrary OS commands with root-level privileges. NOTE: The vendor states that there is no intended functionality allowing an attacker to execute arbitrary OS Commands with root-level privileges. The vendor also states that this issue was fixed in SmartOS 12.5.5.1.

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] in FortiADC 7.6.0 through 7.6.1, 7.4.0 through 7.4.6, 7.2.0 through 7.2.7, 7.1.0 through 7.1.4, 7.0 all versions, 6.2 all versions, 6.1 all versions may allow an authenticated attacker to execute unauthorized code via crafted HTTP requests.

The websocket configuration endpoint of the Loxone Miniserver Go Gen.2 before 14.1.5.9 allows remote authenticated administrators to inject arbitrary OS commands via the timezone parameter.

Dell CloudLink, versions prior to 8.2, contain a vulnerability where a privileged user with known password can run command injection to gain control of system.

Multiple vulnerabilities in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to conduct a path traversal or command injection attack on an affected system. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by using the web-based management interface to do one or both of the following: Execute a command using crafted input Upload a file that has been altered using path traversal techniques A successful exploit could allow the attacker to read and write arbitrary files or execute arbitrary commands as root on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

The Telus Wi-Fi Hub (PRV65B444A-S-TS) with firmware version 3.00.20 is affected by an authenticated command injection vulnerability in multiple parameters passed to tr69_cmd.cgi. A remote attacker connected to the router's LAN and authenticated with a super user account, or using a bypass authentication vulnerability like CVE-2021-20090 could leverage this issue to run commands or gain a shell as root on the target device.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows VisualRF remote OS command execution and file disclosure by administrative users.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

A command injection vulnerability has been reported to affect QuRouter 2.5.1. If a remote attacker gains an administrator account, they can then exploit the vulnerability to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.5.1.060 and later

A vulnerability, which was classified as critical, has been found in D-Link DIR-823X 240126/240802. This issue affects the function sub_41710C of the file /goform/diag_nslookup of the component HTTP POST Request Handler. The manipulation of the argument target_addr leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new SNMP users. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V4.0). Affected devices do not properly sanitize user input when creating new VXLAN configurations. This could allow an authenticated highly-privileged remote attacker to execute arbitrary code on the device.

Dell EMC Integrated Data Protection Appliance versions 2.0, 2.1, 2.2, 2.3, 2.4 contain a command injection vulnerability in the ACM component. A remote authenticated malicious user with root privileges could inject parameters in the ACM component APIs that could lead to manipulation of passwords and execution of malicious commands on ACM component.

An instance of improper neutralization of special elements in the sniffer module of FortiSandbox before 3.2.2 may allow an authenticated administrator to execute commands on the underlying system's shell via altering the content of its configuration file.

A vulnerability in SonicWall SMA100 appliance allow an authenticated management-user to perform OS command injection using HTTP POST parameters. This vulnerability affected SMA100 Appliance version 10.2.0.2-20sv and earlier.

RSA Archer, versions prior to 6.7 P3 (6.7.0.3), contain a command injection vulnerability. AN authenticated malicious user with administrator privileges could potentially exploit this vulnerability to execute arbitrary commands on the system where the vulnerable application is deployed.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Diagnostics Ping page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

CubeCart prior to 6.5.3 allows a remote authenticated attacker with an administrative privilege to execute an arbitrary OS command.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.

IBM QRadar SIEM 7.3 and 7.4 could allow a remote privileged user to execute commands.

In Limdu before 0.95, the trainBatch function has a command injection vulnerability. Clients of the Limdu library are unlikely to be aware of this, so they might unwittingly write code that contains a vulnerability. This has been patched in 0.95.