Cacti is an open source performance and fault management framework. Due to a flaw in multi-line SNMP result parser, authenticated users can inject malformed OIDs in the response. When processed by ss_net_snmp_disk_io() or ss_net_snmp_disk_bytes(), a part of each OID will be used as a key in an array that is used as part of a system command, causing a command execution vulnerability. This vulnerability is fixed in 1.2.29.

The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.10 via the compression_level setting. This is due to the plugin using the compression_level setting in proc_open() without any validation. This makes it possible for authenticated attackers, with administrator-level access and above, to execute code on the server.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.64 and WNDR3700v5 before 1.1.0.54.

OS command injection vulnerability exists in network storage servers STEALTHONE D220/D340/D440 provided by Y'S corporation. A user with an administrative privilege who logged in to the web management page of the affected product may execute an arbitrary OS command.

A flaw has been found in TRENDnet TEW-811DRU 1.0.2.0. This affects the function setDeviceURL  of the file uapply.cgi of the component httpd . This manipulation of the argument DeviceURL causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection vulnerability is present in Aruba Instant that permits an authenticated administrative user to execute arbitrary commands on the underlying operating system. A malicious administrator could use this ability to install backdoors or change system configuration in a way that would not be logged. Workaround: None. Resolution: Fixed in Aruba Instant 4.2.4.12, 6.5.4.11, 8.3.0.6, and 8.4.0.0

A security vulnerability has been detected in Edimax BR-6478AC V3 1.0.15. This issue affects the function sub_416898 of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK-720R v4.1.5cu.374 was discovered to contain a remote code execution (RCE) vulnerability via the setTracerouteCfg function.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_battery_mode` POST parameter.

If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907.

Dell PowerProtect DD, versions prior to 7.13.0.10, LTS 7.7.5.25, LTS 7.10.1.15, 6.2.1.110 contain an OS command injection vulnerability in administrator CLI. A remote high privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS to bypass security restriction. Exploitation may lead to a system take over by an attacker.

An exploitable command injection vulnerability exists in the way Netgate pfSense CE 2.4.4-RELEASE processes the parameters of a specific POST request. The attacker can exploit this and gain the ability to execute arbitrary commands on the system. An attacker needs to be able to send authenticated POST requests to the administration web interface. Command injection is possible in the `powerd_normal_mode` parameter.

A post‑authentication command injection vulnerability in the Dynamic DNS (DDNS) configuration CLI command in Zyxel ATP series firmware versions from V5.35 through V5.41, USG FLEX series firmware versions from V5.35 through V5.41, USG FLEX 50(W) series firmware versions from V5.35 through V5.41, and USG20(W)-VPN series firmware versions from V5.35 through V5.41 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on an affected device by supplying a specially crafted string as an argument to the CLI command.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to execute arbitrary code on an affected device or cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. These vulnerabilities are due to insufficient validation of user fields within incoming HTTP packets. An attacker could exploit these vulnerabilities by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device with root-level privileges or to cause the device to restart unexpectedly, resulting in a DoS condition. To exploit these vulnerabilities, an attacker would need to have valid Administrator credentials on the affected device. Cisco has not released software updates that address these vulnerabilities.

A security vulnerability has been detected in Wavlink WL-NU516U1 240425. This vulnerability affects the function sub_4012A0 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Fetch URL page and entering shell metacharacters in the URL field. (In some cases, authentication can be achieved with the comtech password for the comtech account.)

OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

The Total Upkeep – WordPress Backup Plugin plus Restore & Migrate by BoldGrid plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 1.16.6 via the cron_interval parameter. This is due to missing input validation and sanitization. This makes it possible for authenticated attackers, with Administrator-level access and above, to execute code on the server.

An input validation weakness was discovered in XCC that could allow a valid, authenticated XCC user with elevated privileges to perform command injection through specially crafted command line input in the XCC SSH captive shell.

A post-authentication command injection vulnerability in the "host" parameter of the diagnostic function in Zyxel VMG4005-B50A firmware versions through V5.15(ABQA.2.2)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above

An OS command injection vulnerability in Ivanti Cloud Services Appliance versions 4.6 Patch 518 and before allows a remote authenticated attacker to obtain remote code execution. The attacker must have admin level privileges to exploit this vulnerability.

The ImageMagick Engine ImageMagick Engine WordPress plugin before 1.7.11 for WordPress is vulnerable to OS Command Injection via the "cli_path" parameter. This allows authenticated attackers, with administrator-level permission to execute arbitrary OS commands on the server leading to remote code execution.

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

ASKEY 5G NR Small Cell fails to properly filter user input for certain functionality, allowing remote attackers with administrator privilege to execute arbitrary system commands on the remote server.

A vulnerability was found in Ruijie RG-UAC up to 20240516 and classified as critical. This issue affects some unknown processing of the file /view/systemConfig/sys_user/user_commit.php. The manipulation of the argument email2/user_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266243. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Authenticated command injection vulnerabilities exist in the ArubaOS command line interface. Successful exploitation of these vulnerabilities results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTScloud c5.1.5.2651 and later

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

NetApp OnCommand System Manager 2.1 and earlier allows remote attackers to inject arbitrary commands in the Halt/Reboot interface.

An OS command injection vulnerability allows admins to execute code via SSL VPN configuration uploads in Sophos Firewall releases older than version 19.5 GA.

An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN1000B model firmware versions 1.1.00.24 and 1.1.00.45) via the TimeToLive parameter in the setup.cgi endpoint. The vulnerability arises from improper input neutralization, enabling command injection through crafted POST requests. This flaw enables remote attackers to deploy payloads or manipulate system state post-authentication.

An authenticated OS command injection vulnerability exists in various D-Link routers (tested on DIR-615H1 running firmware version 8.04) via the tools_vct.htm endpoint. The web interface fails to sanitize input passed from the ping_ipaddr parameter to the tools_vct.htm diagnostic interface, allowing attackers to inject arbitrary shell commands using backtick encapsulation. With default credentials, an attacker can exploit this blind injection vector to execute arbitrary commands.

An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored.

OS command injection in the admin panel of Ivanti EPMM before version 12.6.0.2, 12.5.0.4, and 12.4.0.4 allows a remote authenticated attacker with admin privileges to achieve remote code execution.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. Successful exploits could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): ClearPass Policy Manager 6.10.x: 6.10.7 and below and ClearPass Policy Manager 6.9.x: 6.9.12 and below.

In Flowmon versions prior to 12.5.5, a vulnerability has been identified that allows a user with administrator privileges and access to the management interface to execute additional unintended commands within scripts intended for troubleshooting purposes.

A high privileged remote attacker can execute arbitrary system commands via GET requests due to improper neutralization of special elements used in an OS command.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiIsolator before version 2.4.6 allows a privileged attacker with super-admin profile and CLI access to execute unauthorized code via specifically crafted HTTP requests.

An authenticated Remote Code Execution (RCE) vulnerability exists in the AirWave CLI. Successful exploitation of this vulnerability could allow a remote authenticated threat actor to run arbitrary commands as a privileged user on the underlying host.

Openfind Mail2000 does not properly filter parameters of specific API. Remote attackers with administrative privileges can exploit this vulnerability to execute arbitrary system commands on the remote server.