In the Linux kernel, the following vulnerability has been resolved: io_uring: fix use-after-free of sq->thread in __io_uring_show_fdinfo() syzbot reports: BUG: KASAN: slab-use-after-free in getrusage+0x1109/0x1a60 Read of size 8 at addr ffff88810de2d2c8 by task a.out/304 CPU: 0 UID: 0 PID: 304 Comm: a.out Not tainted 6.16.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x670 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? getrusage+0x1109/0x1a60 kasan_report+0xce/0x100 ? getrusage+0x1109/0x1a60 getrusage+0x1109/0x1a60 ? __pfx_getrusage+0x10/0x10 __io_uring_show_fdinfo+0x9fe/0x1790 ? ksys_read+0xf7/0x1c0 ? do_syscall_64+0xa4/0x260 ? vsnprintf+0x591/0x1100 ? __pfx___io_uring_show_fdinfo+0x10/0x10 ? __pfx_vsnprintf+0x10/0x10 ? mutex_trylock+0xcf/0x130 ? __pfx_mutex_trylock+0x10/0x10 ? __pfx_show_fd_locks+0x10/0x10 ? io_uring_show_fdinfo+0x57/0x80 io_uring_show_fdinfo+0x57/0x80 seq_show+0x38c/0x690 seq_read_iter+0x3f7/0x1180 ? inode_set_ctime_current+0x160/0x4b0 seq_read+0x271/0x3e0 ? __pfx_seq_read+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? __mark_inode_dirty+0x402/0x810 ? selinux_file_permission+0x368/0x500 ? file_update_time+0x10f/0x160 vfs_read+0x177/0xa40 ? __pfx___handle_mm_fault+0x10/0x10 ? __pfx_vfs_read+0x10/0x10 ? mutex_lock+0x81/0xe0 ? __pfx_mutex_lock+0x10/0x10 ? fdget_pos+0x24d/0x4b0 ksys_read+0xf7/0x1c0 ? __pfx_ksys_read+0x10/0x10 ? do_user_addr_fault+0x43b/0x9c0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0f74170fc9 Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 8 RSP: 002b:00007fffece049e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0f74170fc9 RDX: 0000000000001000 RSI: 00007fffece049f0 RDI: 0000000000000004 RBP: 00007fffece05ad0 R08: 0000000000000000 R09: 00007fffece04d90 R10: 0000000000000000 R11: 0000000000000206 R12: 00005651720a1100 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 298: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x6e/0x70 kmem_cache_alloc_node_noprof+0xe8/0x330 copy_process+0x376/0x5e00 create_io_thread+0xab/0xf0 io_sq_offload_create+0x9ed/0xf20 io_uring_setup+0x12b0/0x1cc0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 22: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kmem_cache_free+0xc4/0x360 rcu_core+0x5ff/0x19f0 handle_softirqs+0x18c/0x530 run_ksoftirqd+0x20/0x30 smpboot_thread_fn+0x287/0x6c0 kthread+0x30d/0x630 ret_from_fork+0xef/0x1a0 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x33/0x60 kasan_record_aux_stack+0x8c/0xa0 __call_rcu_common.constprop.0+0x68/0x940 __schedule+0xff2/0x2930 __cond_resched+0x4c/0x80 mutex_lock+0x5c/0xe0 io_uring_del_tctx_node+0xe1/0x2b0 io_uring_clean_tctx+0xb7/0x160 io_uring_cancel_generic+0x34e/0x760 do_exit+0x240/0x2350 do_group_exit+0xab/0x220 __x64_sys_exit_group+0x39/0x40 x64_sys_call+0x1243/0x1840 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88810de2cb00 which belongs to the cache task_struct of size 3712 The buggy address is located 1992 bytes inside of freed 3712-byte region [ffff88810de2cb00, ffff88810de2d980) which is caused by the task_struct pointed to by sq->thread being released while it is being used in the function __io_uring_show_fdinfo(). Holding ctx->uring_lock does not prevent ehre relase or exit of sq->thread. Fix this by assigning and looking up ->thread under RCU, and grabbing a reference to the task_struct. This e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class handling This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class handling. The issue occurs due to a time-of-check/time-of-use condition in hfsc_change_class() when working with certain child qdiscs like netem or codel. The vulnerability works as follows: 1. hfsc_change_class() checks if a class has packets (q.qlen != 0) 2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g., codel, netem) might drop packets and empty the queue 3. The code continues assuming the queue is still non-empty, adding the class to vttree 4. This breaks HFSC scheduler assumptions that only non-empty classes are in vttree 5. Later, when the class is destroyed, this can lead to a Use-After-Free The fix adds a second queue length check after qdisc_peek_len() to verify the queue wasn't emptied.

In the Linux kernel, the following vulnerability has been resolved: zloop: fix KASAN use-after-free of tag set When a zoned loop device, or zloop device, is removed, KASAN enabled kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The BUG happens because zloop_ctl_remove() calls put_disk(), which invokes zloop_free_disk(). The zloop_free_disk() frees the memory allocated for the zlo pointer. However, after the memory is freed, zloop_ctl_remove() calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo. Hence the KASAN use-after-free. zloop_ctl_remove() put_disk(zlo->disk) put_device() kobject_put() ... zloop_free_disk() kvfree(zlo) blk_mq_free_tag_set(&zlo->tag_set) To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set) from zloop_ctl_remove() into zloop_free_disk(). This ensures that the tag_set is freed before the call to kvfree(zlo).

In the Linux kernel, the following vulnerability has been resolved: tracing: fprobe events: Fix possible UAF on modules Commit ac91052f0ae5 ("tracing: tprobe-events: Fix leakage of module refcount") moved try_module_get() from __find_tracepoint_module_cb() to find_tracepoint() caller, but that introduced a possible UAF because the module can be unloaded before try_module_get(). In this case, the module object should be freed too. Thus, try_module_get() does not only fail but may access to the freed object. To avoid that, try_module_get() in __find_tracepoint_module_cb() again.

In the Linux kernel, the following vulnerability has been resolved: rpl: Fix use-after-free in rpl_do_srh_inline(). Running lwt_dst_cache_ref_loop.sh in selftest with KASAN triggers the splat below [0]. rpl_do_srh_inline() fetches ipv6_hdr(skb) and accesses it after skb_cow_head(), which is illegal as the header could be freed then. Let's fix it by making oldhdr to a local struct instead of a pointer. [0]: [root@fedora net]# ./lwt_dst_cache_ref_loop.sh ... TEST: rpl (input) [ 57.631529] ================================================================== BUG: KASAN: slab-use-after-free in rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) Read of size 40 at addr ffff888122bf96d8 by task ping6/1543 CPU: 50 UID: 0 PID: 1543 Comm: ping6 Not tainted 6.16.0-rc5-01302-gfadd1e6231b1 #23 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) kasan_check_range (mm/kasan/generic.c:175 (discriminator 1) mm/kasan/generic.c:189 (discriminator 1)) __asan_memmove (mm/kasan/shadow.c:94 (discriminator 2)) rpl_do_srh_inline.isra.0 (net/ipv6/rpl_iptunnel.c:174) rpl_input (net/ipv6/rpl_iptunnel.c:201 net/ipv6/rpl_iptunnel.c:282) lwtunnel_input (net/core/lwtunnel.c:459) ipv6_rcv (./include/net/dst.h:471 (discriminator 1) ./include/net/dst.h:469 (discriminator 1) net/ipv6/ip6_input.c:79 (discriminator 1) ./include/linux/netfilter.h:317 (discriminator 1) ./include/linux/netfilter.h:311 (discriminator 1) net/ipv6/ip6_input.c:311 (discriminator 1)) __netif_receive_skb_one_core (net/core/dev.c:5967) process_backlog (./include/linux/rcupdate.h:869 net/core/dev.c:6440) __napi_poll.constprop.0 (net/core/dev.c:7452) net_rx_action (net/core/dev.c:7518 net/core/dev.c:7643) handle_softirqs (kernel/softirq.c:579) do_softirq (kernel/softirq.c:480 (discriminator 20)) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:407) __dev_queue_xmit (net/core/dev.c:4740) ip6_finish_output2 (./include/linux/netdevice.h:3358 ./include/net/neighbour.h:526 ./include/net/neighbour.h:540 net/ipv6/ip6_output.c:141) ip6_finish_output (net/ipv6/ip6_output.c:215 net/ipv6/ip6_output.c:226) ip6_output (./include/linux/netfilter.h:306 net/ipv6/ip6_output.c:248) ip6_send_skb (net/ipv6/ip6_output.c:1983) rawv6_sendmsg (net/ipv6/raw.c:588 net/ipv6/raw.c:918) __sys_sendto (net/socket.c:714 (discriminator 1) net/socket.c:729 (discriminator 1) net/socket.c:2228 (discriminator 1)) __x64_sys_sendto (net/socket.c:2231) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f68cffb2a06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007ffefb7c53d0 EFLAGS: 00000202 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000564cd69f10a0 RCX: 00007f68cffb2a06 RDX: 0000000000000040 RSI: 0000564cd69f10a4 RDI: 0000000000000003 RBP: 00007ffefb7c53f0 R08: 0000564cd6a032ac R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000202 R12: 0000564cd69f10a4 R13: 0000000000000040 R14: 00007ffefb7c66e0 R15: 0000564cd69f10a0 </TASK> Allocated by task 1543: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345) kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249) kmalloc_reserve (net/core/skbuff.c:581 (discriminator 88)) __alloc_skb (net/core/skbuff.c:669) __ip6_append_data (net/ipv6/ip6_output.c:1672 (discriminator 1)) ip6_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 strlen+0x93/0xa0 lib/string.c:420 __fortify_strlen include/linux/fortify-string.h:268 [inline] get_kobj_path_length lib/kobject.c:118 [inline] kobject_get_path+0x3f/0x2a0 lib/kobject.c:158 kobject_uevent_env+0x289/0x1870 lib/kobject_uevent.c:545 ib_register_device drivers/infiniband/core/device.c:1472 [inline] ib_register_device+0x8cf/0xe00 drivers/infiniband/core/device.c:1393 rxe_register_device+0x275/0x320 drivers/infiniband/sw/rxe/rxe_verbs.c:1552 rxe_net_add+0x8e/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0x70/0x190 drivers/infiniband/sw/rxe/rxe.c:225 nldev_newlink+0x3a3/0x680 drivers/infiniband/core/nldev.c:1796 rdma_nl_rcv_msg+0x387/0x6e0 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb.constprop.0.isra.0+0x2e5/0x450 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x53a/0x7f0 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620 __sys_sendmsg+0x16d/0x220 net/socket.c:2652 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x260 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f This problem is similar to the problem that the commit 1d6a9e7449e2 ("RDMA/core: Fix use-after-free when rename device name") fixes. The root cause is: the function ib_device_rename() renames the name with lock. But in the function kobject_uevent(), this name is accessed without lock protection at the same time. The solution is to add the lock protection when this name is accessed in the function kobject_uevent().

In the Linux kernel, the following vulnerability has been resolved: padata: Fix pd UAF once and for all There is a race condition/UAF in padata_reorder that goes back to the initial commit. A reference count is taken at the start of the process in padata_do_parallel, and released at the end in padata_serial_worker. This reference count is (and only is) required for padata_replace to function correctly. If padata_replace is never called then there is no issue. In the function padata_reorder which serves as the core of padata, as soon as padata is added to queue->serial.list, and the associated spin lock released, that padata may be processed and the reference count on pd would go away. Fix this by getting the next padata before the squeue->serial lock is released. In order to make this possible, simplify padata_reorder by only calling it once the next padata arrives.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in kerberos authentication Setting sess->user = NULL was introduced to fix the dangling pointer created by ksmbd_free_user. However, it is possible another thread could be operating on the session and make use of sess->user after it has been passed to ksmbd_free_user but before sess->user is set to NULL.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9335: Fix missing free of regulator supplies Driver gets and enables all regulator supplies in probe path (wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup in final error paths and in unbind (missing remove() callback). This leads to leaked memory and unbalanced regulator enable count during probe errors or unbind. Fix this by converting entire code into devm_regulator_bulk_get_enable() which also greatly simplifies the code.

In the Linux kernel, the following vulnerability has been resolved: pds_core: remove write-after-free of client_id A use-after-free error popped up in stress testing: [Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47): [Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core] [Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70 [Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180 [Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80 [Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0 [Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80 The actual device uninit usually happens on a separate thread scheduled after this code runs, but there is no guarantee of order of thread execution, so this could be a problem. There's no actual need to clear the client_id at this point, so simply remove the offending code.

In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in binderfs_evict_inode() Running 'stress-ng --binderfs 16 --timeout 300' under KASAN-enabled kernel, I've noticed the following: BUG: KASAN: slab-use-after-free in binderfs_evict_inode+0x1de/0x2d0 Write of size 8 at addr ffff88807379bc08 by task stress-ng-binde/1699 CPU: 0 UID: 0 PID: 1699 Comm: stress-ng-binde Not tainted 6.14.0-rc7-g586de92313fc-dirty #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c2/0x2a0 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 print_report+0x155/0x840 ? __virt_addr_valid+0x18c/0x540 ? __virt_addr_valid+0x469/0x540 ? __phys_addr+0xba/0x170 ? binderfs_evict_inode+0x1de/0x2d0 kasan_report+0x147/0x180 ? binderfs_evict_inode+0x1de/0x2d0 binderfs_evict_inode+0x1de/0x2d0 ? __pfx_binderfs_evict_inode+0x10/0x10 evict+0x524/0x9f0 ? __pfx_lock_release+0x10/0x10 ? __pfx_evict+0x10/0x10 ? do_raw_spin_unlock+0x4d/0x210 ? _raw_spin_unlock+0x28/0x50 ? iput+0x697/0x9b0 __dentry_kill+0x209/0x660 ? shrink_kill+0x8d/0x2c0 shrink_kill+0xa9/0x2c0 shrink_dentry_list+0x2e0/0x5e0 shrink_dcache_parent+0xa2/0x2c0 ? __pfx_shrink_dcache_parent+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 do_one_tree+0x23/0xe0 shrink_dcache_for_umount+0xa0/0x170 generic_shutdown_super+0x67/0x390 kill_litter_super+0x76/0xb0 binderfs_kill_super+0x44/0x90 deactivate_locked_super+0xb9/0x130 cleanup_mnt+0x422/0x4c0 ? lockdep_hardirqs_on+0x9d/0x150 task_work_run+0x1d2/0x260 ? __pfx_task_work_run+0x10/0x10 resume_user_mode_work+0x52/0x60 syscall_exit_to_user_mode+0x9a/0x120 do_syscall_64+0x103/0x210 ? asm_sysvec_apic_timer_interrupt+0x1a/0x20 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0xcac57b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 RSP: 002b:00007ffecf4226a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 00007ffecf422720 RCX: 0000000000cac57b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007ffecf422850 RBP: 00007ffecf422850 R08: 0000000028d06ab1 R09: 7fffffffffffffff R10: 3fffffffffffffff R11: 0000000000000246 R12: 00007ffecf422718 R13: 00007ffecf422710 R14: 00007f478f87b658 R15: 00007ffecf422830 </TASK> Allocated by task 1705: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x213/0x3e0 binderfs_binder_device_create+0x183/0xa80 binder_ctl_ioctl+0x138/0x190 __x64_sys_ioctl+0x120/0x1b0 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1705: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x46/0x50 __kasan_slab_free+0x62/0x70 kfree+0x194/0x440 evict+0x524/0x9f0 do_unlinkat+0x390/0x5b0 __x64_sys_unlink+0x47/0x50 do_syscall_64+0xf6/0x210 entry_SYSCALL_64_after_hwframe+0x77/0x7f This 'stress-ng' workload causes the concurrent deletions from 'binder_devices' and so requires full-featured synchronization to prevent list corruption. I've found this issue independently but pretty sure that syzbot did the same, so Reported-by: and Closes: should be applicable here as well.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix slab-use-after-free in hdcp The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector objects without incrementing the kref reference counts. When using a USB-C dock, and the dock is unplugged, the corresponding amdgpu_dm_connector objects are freed, creating dangling pointers in the HDCP code. When the dock is plugged back, the dangling pointers are dereferenced, resulting in a slab-use-after-free: [ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10 [ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233 [ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024 [ 66.776186] Workqueue: events event_property_validate [amdgpu] [ 66.776494] Call Trace: [ 66.776496] <TASK> [ 66.776497] dump_stack_lvl+0x70/0xa0 [ 66.776504] print_report+0x175/0x555 [ 66.776507] ? __virt_addr_valid+0x243/0x450 [ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0 [ 66.776515] kasan_report+0xeb/0x1c0 [ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777121] __asan_report_load4_noabort+0x14/0x20 [ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777342] ? __lock_acquire+0x6b40/0x6b40 [ 66.777347] ? enable_assr+0x250/0x250 [amdgpu] [ 66.777571] process_one_work+0x86b/0x1510 [ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0 [ 66.777578] ? assign_work+0x16b/0x280 [ 66.777580] ? lock_is_held_type+0xa3/0x130 [ 66.777583] worker_thread+0x5c0/0xfa0 [ 66.777587] ? process_one_work+0x1510/0x1510 [ 66.777588] kthread+0x3a2/0x840 [ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777594] ? trace_hardirqs_on+0x4f/0x60 [ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60 [ 66.777599] ? calculate_sigpending+0x77/0xa0 [ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777605] ret_from_fork+0x40/0x90 [ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777609] ret_from_fork_asm+0x11/0x20 [ 66.777614] </TASK> [ 66.777643] Allocated by task 10: [ 66.777646] kasan_save_stack+0x39/0x60 [ 66.777649] kasan_save_track+0x14/0x40 [ 66.777652] kasan_save_alloc_info+0x37/0x50 [ 66.777655] __kasan_kmalloc+0xbb/0xc0 [ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0 [ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu] [ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper] [ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper] [ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper] [ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper] [ 66.777917] process_one_work+0x86b/0x1510 [ 66.777919] worker_thread+0x5c0/0xfa0 [ 66.777922] kthread+0x3a2/0x840 [ 66.777925] ret_from_fork+0x40/0x90 [ 66.777927] ret_from_fork_asm+0x11/0x20 [ 66.777932] Freed by task 1713: [ 66.777935] kasan_save_stack+0x39/0x60 [ 66.777938] kasan_save_track+0x14/0x40 [ 66.777940] kasan_save_free_info+0x3b/0x60 [ 66.777944] __kasan_slab_free+0x52/0x70 [ 66.777946] kfree+0x13f/0x4b0 [ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu] [ 66.778179] drm_connector_free+0x7d/0xb0 [ 66.778184] drm_mode_object_put.part.0+0xee/0x160 [ 66.778188] drm_mode_object_put+0x37/0x50 [ 66.778191] drm_atomic_state_default_clear+0x220/0xd60 [ 66.778194] __drm_atomic_state_free+0x16e/0x2a0 [ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0 [ 66.778200] drm_ioctl_kernel+0x17a/0x310 [ 66.778203] drm_ioctl+0x584/0xd10 [ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu] [ 66.778375] __x64_sys_ioctl+0x139/0x1a0 [ 66.778378] x64_sys_call+0xee7/0xfb0 [ 66.778381] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put().

In the Linux kernel, the following vulnerability has been resolved: eventpoll: don't decrement ep refcount while still holding the ep mutex Jann Horn points out that epoll is decrementing the ep refcount and then doing a mutex_unlock(&ep->mtx); afterwards. That's very wrong, because it can lead to a use-after-free. That pattern is actually fine for the very last reference, because the code in question will delay the actual call to "ep_free(ep)" until after it has unlocked the mutex. But it's wrong for the much subtler "next to last" case when somebody *else* may also be dropping their reference and free the ep while we're still using the mutex. Note that this is true even if that other user is also using the same ep mutex: mutexes, unlike spinlocks, can not be used for object ownership, even if they guarantee mutual exclusion. A mutex "unlock" operation is not atomic, and as one user is still accessing the mutex as part of unlocking it, another user can come in and get the now released mutex and free the data structure while the first user is still cleaning up. See our mutex documentation in Documentation/locking/mutex-design.rst, in particular the section [1] about semantics: "mutex_unlock() may access the mutex structure even after it has internally released the lock already - so it's not safe for another context to acquire the mutex and assume that the mutex_unlock() context is not using the structure anymore" So if we drop our ep ref before the mutex unlock, but we weren't the last one, we may then unlock the mutex, another user comes in, drops _their_ reference and releases the 'ep' as it now has no users - all while the mutex_unlock() is still accessing it. Fix this by simply moving the ep refcount dropping to outside the mutex: the refcount itself is atomic, and doesn't need mutex protection (that's the whole _point_ of refcounts: unlike mutexes, they are inherently about object lifetimes).

In the Linux kernel, the following vulnerability has been resolved: bridge: mcast: Fix use-after-free during router port configuration The bridge maintains a global list of ports behind which a multicast router resides. The list is consulted during forwarding to ensure multicast packets are forwarded to these ports even if the ports are not member in the matching MDB entry. When per-VLAN multicast snooping is enabled, the per-port multicast context is disabled on each port and the port is removed from the global router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 1 $ bridge -d mdb show | grep router However, the port can be re-added to the global list even when per-VLAN multicast snooping is enabled: # ip link set dev dummy1 type bridge_slave mcast_router 0 # ip link set dev dummy1 type bridge_slave mcast_router 2 $ bridge -d mdb show | grep router router ports on br1: dummy1 Since commit 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions"), when per-VLAN multicast snooping is enabled, multicast disablement on a port will disable the per-{port, VLAN} multicast contexts and not the per-port one. As a result, a port will remain in the global router port list even after it is deleted. This will lead to a use-after-free [1] when the list is traversed (when adding a new port to the list, for example): # ip link del dev dummy1 # ip link add name dummy2 up master br1 type dummy # ip link set dev dummy2 type bridge_slave mcast_router 2 Similarly, stale entries can also be found in the per-VLAN router port list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN} contexts are disabled on each port and the port is removed from the per-VLAN router port list: # ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1 # ip link add name dummy1 up master br1 type dummy # bridge vlan add vid 2 dev dummy1 # bridge vlan global set vid 2 dev br1 mcast_snooping 1 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 # ip link set dev br1 type bridge mcast_vlan_snooping 0 $ bridge vlan global show dev br1 vid 2 | grep router However, the port can be re-added to the per-VLAN list even when per-VLAN multicast snooping is disabled: # bridge vlan set vid 2 dev dummy1 mcast_router 0 # bridge vlan set vid 2 dev dummy1 mcast_router 2 $ bridge vlan global show dev br1 vid 2 | grep router router ports: dummy1 When the VLAN is deleted from the port, the per-{port, VLAN} multicast context will not be disabled since multicast snooping is not enabled on the VLAN. As a result, the port will remain in the per-VLAN router port list even after it is no longer member in the VLAN. This will lead to a use-after-free [2] when the list is traversed (when adding a new port to the list, for example): # ip link add name dummy2 up master br1 type dummy # bridge vlan add vid 2 dev dummy2 # bridge vlan del vid 2 dev dummy1 # bridge vlan set vid 2 dev dummy2 mcast_router 2 Fix these issues by removing the port from the relevant (global or per-VLAN) router port list in br_multicast_port_ctx_deinit(). The function is invoked during port deletion with the per-port multicast context and during VLAN deletion with the per-{port, VLAN} multicast context. Note that deleting the multicast router timer is not enough as it only takes care of the temporary multicast router states (1 or 3) and not the permanent one (2). [1] BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560 Write of size 8 at addr ffff888004a67328 by task ip/384 [...] Call Trace: <TASK> dump_stack ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ext4: fix inode use after free in ext4_end_io_rsv_work() In ext4_io_end_defer_completion(), check if io_end->list_vec is empty to avoid adding an io_end that requires no conversion to the i_rsv_conversion_list, which in turn prevents starting an unnecessary worker. An ext4_emergency_state() check is also added to avoid attempting to abort the journal in an emergency state. Additionally, ext4_put_io_end_defer() is refactored to call ext4_io_end_defer_completion() directly instead of being open-coded. This also prevents starting an unnecessary worker when EXT4_IO_END_FAILED is set but data_err=abort is not enabled. This ensures that the check in ext4_put_io_end_defer() is consistent with the check in ext4_end_bio(). Otherwise, we might add an io_end to the i_rsv_conversion_list and then call ext4_finish_bio(), after which the inode could be freed before ext4_end_io_rsv_work() is called, triggering a use-after-free issue.

In the Linux kernel, the following vulnerability has been resolved: net: atm: fix /proc/net/atm/lec handling /proc/net/atm/lec must ensure safety against dev_lec[] changes. It appears it had dev_put() calls without prior dev_hold(), leading to imbalance and UAF.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using Running IDXD workloads in a container with the /dev directory mounted can trigger a call trace or even a kernel panic when the parent process of the container is terminated. This issue occurs because, under certain configurations, Docker does not properly propagate the mount replica back to the original mount point. In this case, when the user driver detaches, the WQ is destroyed but it still calls destroy_workqueue() attempting to completes all pending work. It's necessary to check wq->wq and skip the drain if it no longer exists.

In the Linux kernel, the following vulnerability has been resolved: net/sched: fix use-after-free in taprio_dev_notifier Since taprio’s taprio_dev_notifier() isn’t protected by an RCU read-side critical section, a race with advance_sched() can lead to a use-after-free. Adding rcu_read_lock() inside taprio_dev_notifier() prevents this.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: Fix oops when HEVC init fails The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400)

In the Linux kernel, the following vulnerability has been resolved: erofs: avoid using multiple devices with different type For multiple devices, both primary and extra devices should be the same type. `erofs_init_device` has already guaranteed that if the primary is a file-backed device, extra devices should also be regular files. However, if the primary is a block device while the extra device is a file-backed device, `erofs_init_device` will get an ENOTBLK, which is not treated as an error in `erofs_fc_get_tree`, and that leads to an UAF: erofs_fc_get_tree get_tree_bdev_flags(erofs_fc_fill_super) erofs_read_superblock erofs_init_device // sbi->dif0 is not inited yet, // return -ENOTBLK deactivate_locked_super free(sbi) if (err is -ENOTBLK) sbi->dif0.file = filp_open() // sbi UAF So if -ENOTBLK is hitted in `erofs_init_device`, it means the primary device must be a block device, and the extra device is not a block device. The error can be converted to -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix use-after-free in page_pool_recycle_in_ring syzbot reported a uaf in page_pool_recycle_in_ring: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 Read of size 8 at addr ffff8880286045a0 by task syz.0.284/6943 CPU: 0 UID: 0 PID: 6943 Comm: syz.0.284 Not tainted 6.13.0-rc3-syzkaller-gdfa94ce54f41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 lock_release+0x151/0xa30 kernel/locking/lockdep.c:5862 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:165 [inline] _raw_spin_unlock_bh+0x1b/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_produce_bh include/linux/ptr_ring.h:164 [inline] page_pool_recycle_in_ring net/core/page_pool.c:707 [inline] page_pool_put_unrefed_netmem+0x748/0xb00 net/core/page_pool.c:826 page_pool_put_netmem include/net/page_pool/helpers.h:323 [inline] page_pool_put_full_netmem include/net/page_pool/helpers.h:353 [inline] napi_pp_put_page+0x149/0x2b0 net/core/skbuff.c:1036 skb_pp_recycle net/core/skbuff.c:1047 [inline] skb_free_head net/core/skbuff.c:1094 [inline] skb_release_data+0x6c4/0x8a0 net/core/skbuff.c:1125 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb net/core/skbuff.c:1204 [inline] sk_skb_reason_drop+0x1c9/0x380 net/core/skbuff.c:1242 kfree_skb_reason include/linux/skbuff.h:1263 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3343 [inline] root cause is: page_pool_recycle_in_ring ptr_ring_produce spin_lock(&r->producer_lock); WRITE_ONCE(r->queue[r->producer++], ptr) //recycle last page to pool page_pool_release page_pool_scrub page_pool_empty_ring ptr_ring_consume page_pool_return_page //release all page __page_pool_destroy free_percpu(pool->recycle_stats); free(pool) //free spin_unlock(&r->producer_lock); //pool->ring uaf read recycle_stat_inc(pool, ring); page_pool can be free while page pool recycle the last page in ring. Add producer-lock barrier to page_pool_release to prevent the page pool from being free before all pages have been recycled. recycle_stat_inc() is empty when CONFIG_PAGE_POOL_STATS is not enabled, which will trigger Wempty-body build warning. Add definition for pool stat macro to fix warning.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix uaf in ath12k_core_init() When the execution of ath12k_core_hw_group_assign() or ath12k_core_hw_group_create() fails, the registered notifier chain is not unregistered properly. Its memory is freed after rmmod, which may trigger to a use-after-free (UAF) issue if there is a subsequent access to this notifier chain. Fixes the issue by calling ath12k_core_panic_notifier_unregister() in failure cases. Call trace: notifier_chain_register+0x4c/0x1f0 (P) atomic_notifier_chain_register+0x38/0x68 ath12k_core_init+0x50/0x4e8 [ath12k] ath12k_pci_probe+0x5f8/0xc28 [ath12k] pci_device_probe+0xbc/0x1a8 really_probe+0xc8/0x3a0 __driver_probe_device+0x84/0x1b0 driver_probe_device+0x44/0x130 __driver_attach+0xcc/0x208 bus_for_each_dev+0x84/0x100 driver_attach+0x2c/0x40 bus_add_driver+0x130/0x260 driver_register+0x70/0x138 __pci_register_driver+0x68/0x80 ath12k_pci_init+0x30/0x68 [ath12k] ath12k_init+0x28/0x78 [ath12k] Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Tear down vGIC on failed vCPU creation If kvm_arch_vcpu_create() fails to share the vCPU page with the hypervisor, we propagate the error back to the ioctl but leave the vGIC vCPU data initialised. Note only does this leak the corresponding memory when the vCPU is destroyed but it can also lead to use-after-free if the redistributor device handling tries to walk into the vCPU. Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the vGIC vCPU structures are destroyed on error.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in cifs_oplock_break A race condition can occur in cifs_oplock_break() leading to a use-after-free of the cinode structure when unmounting: cifs_oplock_break() _cifsFileInfo_put(cfile) cifsFileInfo_put_final() cifs_sb_deactive() [last ref, start releasing sb] kill_sb() kill_anon_super() generic_shutdown_super() evict_inodes() dispose_list() evict() destroy_inode() call_rcu(&inode->i_rcu, i_callback) spin_lock(&cinode->open_file_lock) <- OK [later] i_callback() cifs_free_inode() kmem_cache_free(cinode) spin_unlock(&cinode->open_file_lock) <- UAF cifs_done_oplock_break(cinode) <- UAF The issue occurs when umount has already released its reference to the superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this releases the last reference, triggering the immediate cleanup of all inodes under RCU. However, cifs_oplock_break() continues to access the cinode after this point, resulting in use-after-free. Fix this by holding an extra reference to the superblock during the entire oplock break operation. This ensures that the superblock and its inodes remain valid until the oplock break completes.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget : fix use-after-free in composite_dev_cleanup() 1. In func configfs_composite_bind() -> composite_os_desc_req_prepare(): if kmalloc fails, the pointer cdev->os_desc_req will be freed but not set to NULL. Then it will return a failure to the upper-level function. 2. in func configfs_composite_bind() -> composite_dev_cleanup(): it will checks whether cdev->os_desc_req is NULL. If it is not NULL, it will attempt to use it.This will lead to a use-after-free issue. BUG: KASAN: use-after-free in composite_dev_cleanup+0xf4/0x2c0 Read of size 8 at addr 0000004827837a00 by task init/1 CPU: 10 PID: 1 Comm: init Tainted: G O 5.10.97-oh #1 kasan_report+0x188/0x1cc __asan_load8+0xb4/0xbc composite_dev_cleanup+0xf4/0x2c0 configfs_composite_bind+0x210/0x7ac udc_bind_to_driver+0xb4/0x1ec usb_gadget_probe_driver+0xec/0x21c gadget_dev_desc_UDC_store+0x264/0x27c

In the Linux kernel, the following vulnerability has been resolved: binder: fix yet another UAF in binder_devices Commit e77aff5528a18 ("binderfs: fix use-after-free in binder_devices") addressed a use-after-free where devices could be released without first being removed from the binder_devices list. However, there is a similar path in binder_free_proc() that was missed: ================================================================== BUG: KASAN: slab-use-after-free in binder_remove_device+0xd4/0x100 Write of size 8 at addr ffff0000c773b900 by task umount/467 CPU: 12 UID: 0 PID: 467 Comm: umount Not tainted 6.15.0-rc7-00138-g57483a362741 #9 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_remove_device+0xd4/0x100 binderfs_evict_inode+0x230/0x2f0 evict+0x25c/0x5dc iput+0x304/0x480 dentry_unlink_inode+0x208/0x46c __dentry_kill+0x154/0x530 [...] Allocated by task 463: __kmalloc_cache_noprof+0x13c/0x324 binderfs_binder_device_create.isra.0+0x138/0xa60 binder_ctl_ioctl+0x1ac/0x230 [...] Freed by task 215: kfree+0x184/0x31c binder_proc_dec_tmpref+0x33c/0x4ac binder_deferred_func+0xc10/0x1108 process_one_work+0x520/0xba4 [...] ================================================================== Call binder_remove_device() within binder_free_proc() to ensure the device is removed from the binder_devices list before being kfreed.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix isochronous Ring Underrun/Overrun event handling The TRB pointer of these events points at enqueue at the time of error occurrence on xHCI 1.1+ HCs or it's NULL on older ones. By the time we are handling the event, a new TD may be queued at this ring position. I can trigger this race by rising interrupt moderation to increase IRQ handling delay. Similar delay may occur naturally due to system load. If this ever happens after a Missed Service Error, missed TDs will be skipped and the new TD processed as if it matched the event. It could be given back prematurely, risking data loss or buffer UAF by the xHC. Don't complete TDs on xrun events and don't warn if queued TDs don't match the event's TRB pointer, which can be NULL or a link/no-op TRB. Don't warn if there are no queued TDs at all. Now that it's safe, also handle xrun events if the skip flag is clear. This ensures completion of any TD stuck in 'error mid TD' state right before the xrun event, which could happen if a driver submits a finite number of URBs to a buggy HC and then an error occurs on the last TD.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix potential use-after-free in airoha_npu_get() np->name was being used after calling of_node_put(np), which releases the node and can lead to a use-after-free bug. Previously, of_node_put(np) was called unconditionally after of_find_device_by_node(np), which could result in a use-after-free if pdev is NULL. This patch moves of_node_put(np) after the error check to ensure the node is only released after both the error and success cases are handled appropriately, preventing potential resource issues.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix UAF in __close_file_table_ids A use-after-free is possible if one thread destroys the file via __ksmbd_close_fd while another thread holds a reference to it. The existing checks on fp->refcount are not sufficient to prevent this. The fix takes ft->lock around the section which removes the file from the file table. This prevents two threads acquiring the same file pointer via __close_file_table_ids, as well as the other functions which retrieve a file from the IDR and which already use this same lock.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set().

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence and then return. The code is waiting on m->fence which could be the local fence but this is only stable under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit 762b7e95362170b3e13a8704f38d5e47eca4ba74)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix mode1 reset crash issue If HW scheduler hangs and mode1 reset is used to recover GPU, KFD signal user space to abort the processes. After process abort exit, user queues still use the GPU to access system memory before h/w is reset while KFD cleanup worker free system memory and free VRAM. There is use-after-free race bug that KFD allocate and reuse the freed system memory, and user queue write to the same system memory to corrupt the data structure and cause driver crash. To fix this race, KFD cleanup worker terminate user queues, then flush reset_domain wq to wait for any GPU ongoing reset complete, and then free outstanding BOs.

In the Linux kernel, the following vulnerability has been resolved: dm: fix dm_blk_report_zones If dm_get_live_table() returned NULL, dm_put_live_table() was never called. Also, it is possible that md->zone_revalidate_map will change while calling this function. Only read it once, so that we are always using the same value. Otherwise we might miss a call to dm_put_live_table(). Finally, while md->zone_revalidate_map is set and a process is calling blk_revalidate_disk_zones() to set up the zone append emulation resources, it is possible that another process, perhaps triggered by blkdev_report_zones_ioctl(), will call dm_blk_report_zones(). If blk_revalidate_disk_zones() fails, these resources can be freed while the other process is still using them, causing a use-after-free error. blk_revalidate_disk_zones() will only ever be called when initially setting up the zone append emulation resources, such as when setting up a zoned dm-crypt table for the first time. Further table swaps will not set md->zone_revalidate_map or call blk_revalidate_disk_zones(). However it must be called using the new table (referenced by md->zone_revalidate_map) and the new queue limits while the DM device is suspended. dm_blk_report_zones() needs some way to distinguish between a call from blk_revalidate_disk_zones(), which must be allowed to use md->zone_revalidate_map to access this not yet activated table, and all other calls to dm_blk_report_zones(), which should not be allowed while the device is suspended and cannot use md->zone_revalidate_map, since the zone resources might be freed by the process currently calling blk_revalidate_disk_zones(). Solve this by tracking the process that sets md->zone_revalidate_map in dm_revalidate_zones() and only allowing that process to make use of it in dm_blk_report_zones().

In the Linux kernel, the following vulnerability has been resolved: tipc: Fix use-after-free in tipc_conn_close(). syzbot reported a null-ptr-deref in tipc_conn_close() during netns dismantle. [0] tipc_topsrv_stop() iterates tipc_net(net)->topsrv->conn_idr and calls tipc_conn_close() for each tipc_conn. The problem is that tipc_conn_close() is called after releasing the IDR lock. At the same time, there might be tipc_conn_recv_work() running and it could call tipc_conn_close() for the same tipc_conn and release its last ->kref. Once we release the IDR lock in tipc_topsrv_stop(), there is no guarantee that the tipc_conn is alive. Let's hold the ref before releasing the lock and put the ref after tipc_conn_close() in tipc_topsrv_stop(). [0]: BUG: KASAN: use-after-free in tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 Read of size 8 at addr ffff888099305a08 by task kworker/u4:3/435 CPU: 0 PID: 435 Comm: kworker/u4:3 Not tainted 4.19.204-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fc/0x2ef lib/dump_stack.c:118 print_address_description.cold+0x54/0x219 mm/kasan/report.c:256 kasan_report_error.cold+0x8a/0x1b9 mm/kasan/report.c:354 kasan_report mm/kasan/report.c:412 [inline] __asan_report_load8_noabort+0x88/0x90 mm/kasan/report.c:433 tipc_conn_close+0x122/0x140 net/tipc/topsrv.c:165 tipc_topsrv_stop net/tipc/topsrv.c:701 [inline] tipc_topsrv_exit_net+0x27b/0x5c0 net/tipc/topsrv.c:722 ops_exit_list+0xa5/0x150 net/core/net_namespace.c:153 cleanup_net+0x3b4/0x8b0 net/core/net_namespace.c:553 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Allocated by task 23: kmem_cache_alloc_trace+0x12f/0x380 mm/slab.c:3625 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] tipc_conn_alloc+0x43/0x4f0 net/tipc/topsrv.c:192 tipc_topsrv_accept+0x1b5/0x280 net/tipc/topsrv.c:470 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 Freed by task 23: __cache_free mm/slab.c:3503 [inline] kfree+0xcc/0x210 mm/slab.c:3822 tipc_conn_kref_release net/tipc/topsrv.c:150 [inline] kref_put include/linux/kref.h:70 [inline] conn_put+0x2cd/0x3a0 net/tipc/topsrv.c:155 process_one_work+0x864/0x1570 kernel/workqueue.c:2153 worker_thread+0x64c/0x1130 kernel/workqueue.c:2296 kthread+0x33f/0x460 kernel/kthread.c:259 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff888099305a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 8 bytes inside of 512-byte region [ffff888099305a00, ffff888099305c00) The buggy address belongs to the page: page:ffffea000264c140 count:1 mapcount:0 mapping:ffff88813bff0940 index:0x0 flags: 0xfff00000000100(slab) raw: 00fff00000000100 ffffea00028b6b88 ffffea0002cd2b08 ffff88813bff0940 raw: 0000000000000000 ffff888099305000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888099305900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888099305a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888099305a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888099305b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed.

In the Linux kernel, the following vulnerability has been resolved: coresight: prevent deactivate active config while enabling the config While enable active config via cscfg_csdev_enable_active_config(), active config could be deactivated via configfs' sysfs interface. This could make UAF issue in below scenario: CPU0 CPU1 (sysfs enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() unload module // access to config_desc which freed // while unloading module. cscfg_csdev_enable_config To address this, use cscfg_config_desc's active_cnt as a reference count which will be holded when - activate the config. - enable the activated config. and put the module reference when config_active_cnt == 0.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Reset IRTE to host control if *new* route isn't postable Restore an IRTE back to host control (remapped or posted MSI mode) if the *new* GSI route prevents posting the IRQ directly to a vCPU, regardless of the GSI routing type. Updating the IRTE if and only if the new GSI is an MSI results in KVM leaving an IRTE posting to a vCPU. The dangling IRTE can result in interrupts being incorrectly delivered to the guest, and in the worst case scenario can result in use-after-free, e.g. if the VM is torn down, but the underlying host IRQ isn't freed.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_session_rpc_open A UAF issue can occur due to a race condition between ksmbd_session_rpc_open() and __session_rpc_close(). Add rpc_lock to the session to protect it.

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix UAF in panthor_gem_create_with_handle() debugfs code The object is potentially already gone after the drm_gem_object_put(). In general the object should be fully constructed before calling drm_gem_handle_create(), except the debugfs tracking uses a separate lock and list and separate flag to denotate whether the object is actually initialized. Since I'm touching this all anyway simplify this by only adding the object to the debugfs when it's ready for that, which allows us to delete that separate flag. panthor_gem_debugfs_bo_rm() already checks whether we've actually been added to the list or this is some error path cleanup. v2: Fix build issues for !CONFIG_DEBUGFS (Adrián) v3: Add linebreak and remove outdated comment (Liviu)

In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_genl_connect() error path There is a use-after-free issue in nbd: block nbd6: Receive control failed (result -104) block nbd6: shutting down sockets ================================================================== BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022 Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67 CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: nbd6-recv recv_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline] recv_work+0x694/0xa80 drivers/block/nbd.c:1022 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> nbd_genl_connect() does not properly stop the device on certain error paths after nbd_start_device() has been called. This causes the error path to put nbd->config while recv_work continue to use the config after putting it, leading to use-after-free in recv_work. This patch moves nbd_start_device() after the backend file creation.

In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: Cancel outstanding rescan work when unregistering It's possible to trigger use-after-free here by: (a) forcing rescan_work_func() to take a long time and (b) utilizing a pwrctrl driver that may be unloaded for some reason Cancel outstanding work to ensure it is finished before we allow our data structures to be cleaned up. [bhelgaas: tidy commit log]

In the Linux kernel, the following vulnerability has been resolved: xfrm: interface: fix use-after-free after changing collect_md xfrm interface collect_md property on xfrm interfaces can only be set on device creation, thus xfrmi_changelink() should fail when called on such interfaces. The check to enforce this was done only in the case where the xi was returned from xfrmi_locate() which doesn't look for the collect_md interface, and thus the validation was never reached. Calling changelink would thus errornously place the special interface xi in the xfrmi_net->xfrmi hash, but since it also exists in the xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when the net namespace was taken down [1]. Change the check to use the xi from netdev_priv which is available earlier in the function to prevent changes in xfrm collect_md interfaces. [1] resulting oops: [ 8.516540] kernel BUG at net/core/dev.c:12029! [ 8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme #5 PREEMPT(voluntary) [ 8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 8.516569] Workqueue: netns cleanup_net [ 8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0 [ 8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24 [ 8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206 [ 8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60 [ 8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122 [ 8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100 [ 8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00 [ 8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00 [ 8.516615] FS: 0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000 [ 8.516619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0 [ 8.516625] PKRU: 55555554 [ 8.516627] Call Trace: [ 8.516632] <TASK> [ 8.516635] ? rtnl_is_locked+0x15/0x20 [ 8.516641] ? unregister_netdevice_queue+0x29/0xf0 [ 8.516650] ops_undo_list+0x1f2/0x220 [ 8.516659] cleanup_net+0x1ad/0x2e0 [ 8.516664] process_one_work+0x160/0x380 [ 8.516673] worker_thread+0x2aa/0x3c0 [ 8.516679] ? __pfx_worker_thread+0x10/0x10 [ 8.516686] kthread+0xfb/0x200 [ 8.516690] ? __pfx_kthread+0x10/0x10 [ 8.516693] ? __pfx_kthread+0x10/0x10 [ 8.516697] ret_from_fork+0x82/0xf0 [ 8.516705] ? __pfx_kthread+0x10/0x10 [ 8.516709] ret_from_fork_asm+0x1a/0x30 [ 8.516718] </TASK>

In the Linux kernel, the following vulnerability has been resolved: vsock: Do not allow binding to VMADDR_PORT_ANY It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can cause a use-after-free when a connection is made to the bound socket. The socket returned by accept() also has port VMADDR_PORT_ANY but is not on the list of unbound sockets. Binding it will result in an extra refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep the binding until socket destruction). Modify the check in __vsock_bind_connectible() to also prevent binding to VMADDR_PORT_ANY.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __smb2_lease_break_noti() Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is referenced when ksmbd server thread terminates, It will not be freed, but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed asynchronously when the connection is disconnected. __smb2_lease_break_noti calls ksmbd_conn_write, which can cause use-after-free when conn->ksmbd_transport is already freed.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potential use-after-free in oplock/lease break ack If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice.

In the Linux kernel, the following vulnerability has been resolved: tls: always refresh the queue when reading sock After recent changes in net-next TCP compacts skbs much more aggressively. This unearthed a bug in TLS where we may try to operate on an old skb when checking if all skbs in the queue have matching decrypt state and geometry. BUG: KASAN: slab-use-after-free in tls_strp_check_rcv+0x898/0x9a0 [tls] (net/tls/tls_strp.c:436 net/tls/tls_strp.c:530 net/tls/tls_strp.c:544) Read of size 4 at addr ffff888013085750 by task tls/13529 CPU: 2 UID: 0 PID: 13529 Comm: tls Not tainted 6.16.0-rc5-virtme Call Trace: kasan_report+0xca/0x100 tls_strp_check_rcv+0x898/0x9a0 [tls] tls_rx_rec_wait+0x2c9/0x8d0 [tls] tls_sw_recvmsg+0x40f/0x1aa0 [tls] inet_recvmsg+0x1c3/0x1f0 Always reload the queue, fast path is to have the record in the queue when we wake, anyway (IOW the path going down "if !strp->stm.full_len").

In the Linux kernel, the following vulnerability has been resolved: proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al Check pde->proc_ops->proc_lseek directly may cause UAF in rmmod scenario. It's a gap in proc_reg_open() after commit 654b33ada4ab("proc: fix UAF in proc_get_inode()"). Followed by AI Viro's suggestion, fix it in same manner.

In the Linux kernel, the following vulnerability has been resolved: HSI: ssi_protocol: Fix use after free vulnerability in ssi_protocol Driver Due to Race Condition In the ssi_protocol_probe() function, &ssi->work is bound with ssip_xmit_work(), In ssip_pn_setup(), the ssip_pn_xmit() function within the ssip_pn_ops structure is capable of starting the work. If we remove the module which will call ssi_protocol_remove() to make a cleanup, it will free ssi through kfree(ssi), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | ssip_xmit_work ssi_protocol_remove | kfree(ssi); | | struct hsi_client *cl = ssi->cl; | // use ssi Fix it by ensuring that the work is canceled before proceeding with the cleanup in ssi_protocol_remove().