In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free Struct pcie_link_state->downstream is a pointer to the pci_dev of function 0. Previously we retained that pointer when removing function 0, and subsequent ASPM policy changes dereferenced it, resulting in a use-after-free warning from KASAN, e.g.: # echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove # echo powersave > /sys/module/pcie_aspm/parameters/policy BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500 Call Trace: kasan_report+0xae/0xe0 pcie_config_aspm_link+0x42d/0x500 pcie_aspm_set_policy+0x8e/0x1a0 param_attr_store+0x162/0x2c0 module_attr_store+0x3e/0x80 PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM Control value in all functions of multi-function devices. Disable ASPM and free the pcie_link_state when any child function is removed so we can discard the dangling pcie_link_state->downstream pointer and maintain the same ASPM Control configuration for all functions. [bhelgaas: commit log and comment]

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). Previously, nilfs_evict_inode() could cause use-after-free read for nilfs_root if inodes are left in "garbage_list" and released by nilfs_dispose_list at the end of nilfs_detach_log_writer(), and this bug was fixed by commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()"). However, it turned out that there is another possibility of UAF in the call path where mark_inode_dirty_sync() is called from iput(): nilfs_detach_log_writer() nilfs_dispose_list() iput() mark_inode_dirty_sync() __mark_inode_dirty() nilfs_dirty_inode() __nilfs_mark_inode_dirty() nilfs_load_inode_block() --> causes UAF of nilfs_root struct This can happen after commit 0ae45f63d4ef ("vfs: add support for a lazytime mount option"), which changed iput() to call mark_inode_dirty_sync() on its final reference if i_state has I_DIRTY_TIME flag and i_nlink is non-zero. This issue appears after commit 28a65b49eb53 ("nilfs2: do not write dirty data after degenerating to read-only") when using the syzbot reproducer, but the issue has potentially existed before. Fix this issue by adding a "purging flag" to the nilfs structure, setting that flag while disposing the "garbage_list" and checking it in __nilfs_mark_inode_dirty(). Unlike commit 9b5a04ac3ad9 ("nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode()"), this patch does not rely on ns_writer to determine whether to skip operations, so as not to break recovery on mount. The nilfs_salvage_orphan_logs routine dirties the buffer of salvaged data before attaching the log writer, so changing __nilfs_mark_inode_dirty() to skip the operation when ns_writer is NULL will cause recovery write to fail. The purpose of using the cleanup-only flag is to allow for narrowing of such conditions.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free Fix potential use-after-free in l2cap_le_command_rej.

A flaw null pointer dereference in the Linux kernel cgroupv2 subsystem in versions before 5.7.10 was found in the way when reboot the system. A local user could use this flaw to crash the system or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: virtio-mmio: don't break lifecycle of vm_dev vm_dev has a separate lifecycle because it has a 'struct device' embedded. Thus, having a release callback for it is correct. Allocating the vm_dev struct with devres totally breaks this protection, though. Instead of waiting for the vm_dev release callback, the memory is freed when the platform_device is removed. Resulting in a use-after-free when finally the callback is to be called. To easily see the problem, compile the kernel with CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs. The fix is easy, don't use devres in this case. Found during my research about object lifetime problems.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix use after free for wext Key information in wext.connect is not reset on (re)connect and can hold data from a previous connection. Reset key data to avoid that drivers or mac80211 incorrectly detect a WEP connection request and access the freed or already reused memory. Additionally optimize cfg80211_sme_connect() and avoid an useless schedule of conn_work.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: call disconnect callback before deleting conn In hci_cs_disconnect, we do hci_conn_del even if disconnection failed. ISO, L2CAP and SCO connections refer to the hci_conn without hci_conn_get, so disconn_cfm must be called so they can clean up their conn, otherwise use-after-free occurs. ISO: ========================================================== iso_sock_connect:880: sk 00000000eabd6557 iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 000000001696f1fd conn 00000000b6251073 hci_dev_put:1487: hci0 orig refcnt 17 __iso_chan_add:214: conn 00000000b6251073 iso_sock_clear_timer:117: sock 00000000eabd6557 state 3 ... hci_rx_work:4085: hci0 Event packet hci_event_packet:7601: hci0: event 0x0f hci_cmd_status_evt:4346: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3107: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon 000000001696f1fd handle 2560 hci_conn_unlink:1102: hci0: hcon 000000001696f1fd hci_conn_drop:1451: hcon 00000000d8521aaf orig refcnt 2 hci_chan_list_flush:2780: hcon 000000001696f1fd hci_dev_put:1487: hci0 orig refcnt 21 hci_dev_put:1487: hci0 orig refcnt 20 hci_req_cmd_complete:3978: opcode 0x0406 status 0x0c ... <no iso_* activity on sk/conn> ... iso_sock_sendmsg:1098: sock 00000000dea5e2e0, sk 00000000eabd6557 BUG: kernel NULL pointer dereference, address: 0000000000000668 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:iso_sock_sendmsg (net/bluetooth/iso.c:1112) bluetooth ========================================================== L2CAP: ================================================================== hci_cmd_status_evt:4359: hci0: opcode 0x0406 hci_cs_disconnect:2760: hci0: status 0x0c hci_sent_cmd_data:3085: hci0 opcode 0x0406 hci_conn_del:1151: hci0 hcon ffff88800c999000 handle 3585 hci_conn_unlink:1102: hci0: hcon ffff88800c999000 hci_chan_list_flush:2780: hcon ffff88800c999000 hci_chan_del:2761: hci0 hcon ffff88800c999000 chan ffff888018ddd280 ... BUG: KASAN: slab-use-after-free in hci_send_acl+0x2d/0x540 [bluetooth] Read of size 8 at addr ffff888018ddd298 by task bluetoothd/1175 CPU: 0 PID: 1175 Comm: bluetoothd Tainted: G E 6.4.0-rc4+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0xf8/0x180 ? hci_send_acl+0x2d/0x540 [bluetooth] kasan_report+0xa8/0xe0 ? hci_send_acl+0x2d/0x540 [bluetooth] hci_send_acl+0x2d/0x540 [bluetooth] ? __pfx___lock_acquire+0x10/0x10 l2cap_chan_send+0x1fd/0x1300 [bluetooth] ? l2cap_sock_sendmsg+0xf2/0x170 [bluetooth] ? __pfx_l2cap_chan_send+0x10/0x10 [bluetooth] ? lock_release+0x1d5/0x3c0 ? mark_held_locks+0x1a/0x90 l2cap_sock_sendmsg+0x100/0x170 [bluetooth] sock_write_iter+0x275/0x280 ? __pfx_sock_write_iter+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 do_iter_readv_writev+0x176/0x220 ? __pfx_do_iter_readv_writev+0x10/0x10 ? find_held_lock+0x83/0xa0 ? selinux_file_permission+0x13e/0x210 do_iter_write+0xda/0x340 vfs_writev+0x1b4/0x400 ? __pfx_vfs_writev+0x10/0x10 ? __seccomp_filter+0x112/0x750 ? populate_seccomp_data+0x182/0x220 ? __fget_light+0xdf/0x100 ? do_writev+0x19d/0x210 do_writev+0x19d/0x210 ? __pfx_do_writev+0x10/0x10 ? mark_held_locks+0x1a/0x90 do_syscall_64+0x60/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 ? do_syscall_64+0x6c/0x90 ? lockdep_hardirqs_on_prepare+0x149/0x210 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7ff45cb23e64 Code: 15 d1 1f 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d 9d a7 0d 00 00 74 13 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 RSP: 002b:00007fff21ae09b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ublk: fail to start device if queue setup is interrupted In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered. Reported by German when working on qemu-storage-deamon which requires single thread ublk daemon.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems() nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the number of MBSSID elements in the nested netlink attribute attrs, which can lead to an integer overflow if a user of the nl80211 interface specifies 256 or more elements in the corresponding attribute in userspace. The integer overflow can lead to a heap buffer overflow as num_elems determines the size of the trailing array in elems, and this array is thereafter written to for each element in attrs. Note that this vulnerability only affects devices with the wiphy->mbssid_max_interfaces member set for the wireless physical device struct in the device driver, and can only be triggered by a process with CAP_NET_ADMIN capabilities. Fix this by checking for a maximum of 255 elements in attrs.

In the Linux kernel, the following vulnerability has been resolved: ip_vti: fix potential slab-use-after-free in decode_session6 When ip_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ip_vti device sends IPv6 packets. As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: wmi: Fix opening of char device Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device using container_of(). This also avoids wmi_char_open() picking a wrong WMI device bound to a driver with the same name as the original driver.

In the Linux kernel, the following vulnerability has been resolved: crypto: seqiv - Handle EBUSY correctly As it is seqiv only handles the special return value of EINPROGERSS, which means that in all other cases it will free data related to the request. However, as the caller of seqiv may specify MAY_BACKLOG, we also need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: fix possible use-after-free syzbot reported a nasty crash [1] in net_tx_action() which made little sense until we got a repro. This repro installs a taprio qdisc, but providing an invalid TCA_RATE attribute. qdisc_create() has to destroy the just initialized taprio qdisc, and taprio_destroy() is called. However, the hrtimer used by taprio had already fired, therefore advance_sched() called __netif_schedule(). Then net_tx_action was trying to use a destroyed qdisc. We can not undo the __netif_schedule(), so we must wait until one cpu serviced the qdisc before we can proceed. Many thanks to Alexander Potapenko for his help. [1] BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline] BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] do_raw_spin_trylock include/linux/spinlock.h:191 [inline] __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 spin_trylock include/linux/spinlock.h:359 [inline] qdisc_run_begin include/net/sch_generic.h:187 [inline] qdisc_run+0xee/0x540 include/net/pkt_sched.h:125 net_tx_action+0x77c/0x9a0 net/core/dev.c:5086 __do_softirq+0x1cc/0x7fb kernel/softirq.c:571 run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934 smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164 kthread+0x31b/0x430 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Uninit was created at: slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3258 [inline] __kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0x346/0xcf0 net/core/skbuff.c:430 alloc_skb include/linux/skbuff.h:1257 [inline] nlmsg_new include/net/netlink.h:953 [inline] netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436 netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507 rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xabc/0xe90 net/socket.c:2482 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536 __sys_sendmsg net/socket.c:2565 [inline] __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not ignore genmask when looking up chain by id When adding a rule to a chain referring to its ID, if that chain had been deleted on the same batch, the rule might end up referring to a deleted chain. This will lead to a WARNING like following: [ 33.098431] ------------[ cut here ]------------ [ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260 [ 33.099217] Modules linked in: [ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409 [ 33.099726] Workqueue: events nf_tables_trans_destroy_work [ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260 [ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 [ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202 [ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000 [ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000 [ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500 [ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10 [ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000 [ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0 [ 33.104872] PKRU: 55555554 [ 33.104999] Call Trace: [ 33.105113] <TASK> [ 33.105214] ? show_regs+0x72/0x90 [ 33.105371] ? __warn+0xa5/0x210 [ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.105732] ? report_bug+0x1f2/0x200 [ 33.105902] ? handle_bug+0x46/0x90 [ 33.106546] ? exc_invalid_op+0x19/0x50 [ 33.106762] ? asm_exc_invalid_op+0x1b/0x20 [ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.107249] ? nf_tables_chain_destroy+0x30/0x260 [ 33.107506] nf_tables_trans_destroy_work+0x669/0x680 [ 33.107782] ? mark_held_locks+0x28/0xa0 [ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70 [ 33.108538] process_one_work+0x68c/0xb70 [ 33.108755] ? lock_acquire+0x17f/0x420 [ 33.108977] ? __pfx_process_one_work+0x10/0x10 [ 33.109218] ? do_raw_spin_lock+0x128/0x1d0 [ 33.109435] ? _raw_spin_lock_irq+0x71/0x80 [ 33.109634] worker_thread+0x2bd/0x700 [ 33.109817] ? __pfx_worker_thread+0x10/0x10 [ 33.110254] kthread+0x18b/0x1d0 [ 33.110410] ? __pfx_kthread+0x10/0x10 [ 33.110581] ret_from_fork+0x29/0x50 [ 33.110757] </TASK> [ 33.110866] irq event stamp: 1651 [ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0 [ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0 [ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112453] ---[ end trace 0000000000000000 ]--- This is due to the nft_chain_lookup_byid ignoring the genmask. After this change, adding the new rule will fail as it will not find the chain.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output syzkaller reportes a KASAN issue with stack-out-of-bounds. The call trace is as follows: dump_stack+0x9c/0xd3 print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 __perf_event_header__init_id+0x34/0x290 perf_event_header__init_id+0x48/0x60 perf_output_begin+0x4a4/0x560 perf_event_bpf_output+0x161/0x1e0 perf_iterate_sb_cpu+0x29e/0x340 perf_iterate_sb+0x4c/0xc0 perf_event_bpf_event+0x194/0x2c0 __bpf_prog_put.constprop.0+0x55/0xf0 __cls_bpf_delete_prog+0xea/0x120 [cls_bpf] cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf] process_one_work+0x3c2/0x730 worker_thread+0x93/0x650 kthread+0x1b8/0x210 ret_from_fork+0x1f/0x30 commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") use on-stack struct perf_sample_data of the caller function. However, perf_event_bpf_output uses incorrect parameter to convert small-sized data (struct perf_bpf_event) into large-sized data (struct perf_sample_data), which causes memory overwriting occurs in __perf_event_header__init_id.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove.

An issue was discovered in the Linux kernel before 4.14.11. A double free may be caused by the function allocate_trace_buffer in the file kernel/trace/trace.c.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Clean dangling pointer on bind error path mtk_drm_bind() can fail, in which case drm_dev_put() is called, destroying the drm_device object. However a pointer to it was still being held in the private object, and that pointer would be passed along to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that point, resulting in a panic. Clean the pointer when destroying the object in the error path to prevent this from happening.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix possible UAF in amdgpu_cs_pass1() Since the gang_size check is outside of chunk parsing loop, we need to reset i before we free the chunk data. Suggested by Ye Zhang (@VAR10CK) of Baidu Security.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mpls: Fix warning during failed attribute validation The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: net: nfc: Fix use-after-free in local_cleanup() Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301)

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid potential vm use-after-free Adding the vm to the vm_xa table makes it visible to userspace, which could try to race with us to close the vm. So we need to take our extra reference before putting it in the table. (cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)

In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid potential UAF in nvmet_req_complete() An nvme target ->queue_response() operation implementation may free the request passed as argument. Such implementation potentially could result in a use after free of the request pointer when percpu_ref_put() is called in nvmet_req_complete(). Avoid such problem by using a local variable to save the sq pointer before calling __nvmet_req_complete(), thus avoiding dereferencing the req pointer after that function call.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix potential use-after-free when clear keys Similar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu() call.

In the Linux kernel, the following vulnerability has been resolved: macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381

In the Linux kernel, the following vulnerability has been resolved: tracing/histograms: Add histograms to hist_vars if they have referenced variables Hist triggers can have referenced variables without having direct variables fields. This can be the case if referenced variables are added for trigger actions. In this case the newly added references will not have field variables. Not taking such referenced variables into consideration can result in a bug where it would be possible to remove hist trigger with variables being refenced. This will result in a bug that is easily reproducable like so $ cd /sys/kernel/tracing $ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events $ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger $ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger $ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger [ 100.263533] ================================================================== [ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180 [ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439 [ 100.266320] [ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4 [ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 100.268561] Call Trace: [ 100.268902] <TASK> [ 100.269189] dump_stack_lvl+0x4c/0x70 [ 100.269680] print_report+0xc5/0x600 [ 100.270165] ? resolve_var_refs+0xc7/0x180 [ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0 [ 100.271389] ? resolve_var_refs+0xc7/0x180 [ 100.271913] kasan_report+0xbd/0x100 [ 100.272380] ? resolve_var_refs+0xc7/0x180 [ 100.272920] __asan_load8+0x71/0xa0 [ 100.273377] resolve_var_refs+0xc7/0x180 [ 100.273888] event_hist_trigger+0x749/0x860 [ 100.274505] ? kasan_save_stack+0x2a/0x50 [ 100.275024] ? kasan_set_track+0x29/0x40 [ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10 [ 100.276138] ? ksys_write+0xd1/0x170 [ 100.276607] ? do_syscall_64+0x3c/0x90 [ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.277771] ? destroy_hist_data+0x446/0x470 [ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860 [ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10 [ 100.279627] ? __kasan_check_write+0x18/0x20 [ 100.280177] ? mutex_unlock+0x85/0xd0 [ 100.280660] ? __pfx_mutex_unlock+0x10/0x10 [ 100.281200] ? kfree+0x7b/0x120 [ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0 [ 100.282197] ? event_trigger_write+0xac/0x100 [ 100.282764] ? __kasan_slab_free+0x16/0x20 [ 100.283293] ? __kmem_cache_free+0x153/0x2f0 [ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250 [ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10 [ 100.285221] ? event_trigger_write+0xbc/0x100 [ 100.285781] ? __kasan_check_read+0x15/0x20 [ 100.286321] ? __bitmap_weight+0x66/0xa0 [ 100.286833] ? _find_next_bit+0x46/0xe0 [ 100.287334] ? task_mm_cid_work+0x37f/0x450 [ 100.287872] event_triggers_call+0x84/0x150 [ 100.288408] trace_event_buffer_commit+0x339/0x430 [ 100.289073] ? ring_buffer_event_data+0x3f/0x60 [ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0 [ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0 [ 100.298653] syscall_enter_from_user_mode+0x32/0x40 [ 100.301808] do_syscall_64+0x1a/0x90 [ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.307775] RIP: 0033:0x7f686c75c1cb [ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48 [ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021 [ 100.321200] RA ---truncated---

In the Linux kernel, the following vulnerability has been resolved: erspan: do not use skb_mac_header() in ndo_start_xmit() Drivers should not assume skb_mac_header(skb) == skb->data in their ndo_start_xmit(). Use skb_network_offset() and skb_transport_offset() which better describe what is needed in erspan_fb_xmit() and ip6erspan_tunnel_xmit() syzbot reported: WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline] WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962 Modules linked in: CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962 Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00 RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003 RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00 R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000 FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4900 [inline] netdev_start_xmit include/linux/netdevice.h:4914 [inline] __dev_direct_xmit+0x504/0x730 net/core/dev.c:4300 dev_direct_xmit include/linux/netdevice.h:3088 [inline] packet_xmit+0x20a/0x390 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3075 [inline] packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0xde/0x190 net/socket.c:747 __sys_sendto+0x23a/0x340 net/socket.c:2142 __do_sys_sendto net/socket.c:2154 [inline] __se_sys_sendto net/socket.c:2150 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f123aaa1039 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0 R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

In the Linux kernel, the following vulnerability has been resolved: perf: hisi: Fix use-after-free when register pmu fails When we fail to register the uncore pmu, the pmu context may not been allocated. The error handing will call cpuhp_state_remove_instance() to call uncore pmu offline callback, which migrate the pmu context. Since that's liable to lead to some kind of use-after-free. Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been failed to register.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function When a reset notify IPC message is received, the ISR schedules a work function and passes the ISHTP device to it via a global pointer ishtp_dev. If ish_probe() fails, the devm-managed device resources including ishtp_dev are freed, but the work is not cancelled, causing a use-after-free when the work function tries to access ishtp_dev. Use devm_work_autocancel() instead, so that the work is automatically cancelled if probe fails.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix a potential double-free in fs_any_create_groups When kcalloc() for ft->g succeeds but kvzalloc() for in fails, fs_any_create_groups() will free ft->g. However, its caller fs_any_create_table() will free ft->g again through calling mlx5e_destroy_flow_table(), which will lead to a double-free. Fix this by setting ft->g to NULL in fs_any_create_groups().

In the Linux kernel, the following vulnerability has been resolved: iommu: Don't reserve 0-length IOVA region When the bootloader/firmware doesn't setup the framebuffers, their address and size are 0 in "iommu-addresses" property. If IOVA region is reserved with 0 length, then it ends up corrupting the IOVA rbtree with an entry which has pfn_hi < pfn_lo. If we intend to use display driver in kernel without framebuffer then it's causing the display IOMMU mappings to fail as entire valid IOVA space is reserved when address and length are passed as 0. An ideal solution would be firmware removing the "iommu-addresses" property and corresponding "memory-region" if display is not present. But the kernel should be able to handle this by checking for size of IOVA region and skipping the IOVA reservation if size is 0. Also, add a warning if firmware is requesting 0-length IOVA region reservation.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER) Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Add alignment check for event ring read pointer Though we do check the event ring read pointer by "is_valid_ring_ptr" to make sure it is in the buffer range, but there is another risk the pointer may be not aligned. Since we are expecting event ring elements are 128 bits(struct mhi_ring_element) aligned, an unaligned read pointer could lead to multiple issues like DoS or ring buffer memory corruption. So add a alignment check for event ring read pointer.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt

In the Linux kernel, the following vulnerability has been resolved: FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6 index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]') CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> ================================================================================ Kernel panic - not syncing: UBSAN: panic_on_warn set ... CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 panic+0x30f/0x770 kernel/panic.c:340 check_panic_on_warn+0x82/0xa0 kernel/panic.c:236 ubsan_epilogue lib/ubsan.c:223 [inline] __ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> Kernel Offset: disabled Rebooting in 86400 seconds.. The issue is caused when the value of lp becomes greater than CTLTREESIZE which is the max size of stree. Adding a simple check solves this issue. Dave: As the function returns a void, good error handling would require a more intrusive code reorganization, so I modified Osama's patch at use WARN_ON_ONCE for lack of a cleaner option. The patch is tested via syzbot.

In the Linux kernel, the following vulnerability has been resolved: of: Fix double free in of_parse_phandle_with_args_map In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Addition and removal of rules from chain bindings within the same transaction causes leads to use-after-free. We recommend upgrading past commit f15f29fd4779be8a418b66e9d52979bb6d6c2325.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the ".." link. And cross-directory rename does move the source to new parent, even if you'd been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update ".." link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix a double-free in si_dpm_init When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbAdjTree Currently there is a bound check missing in the dbAdjTree while accessing the dmt_stree. To add the required check added the bool is_ctl which is required to determine the size as suggest in the following commit. https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/

In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:bpf_map_lookup_elem+0x54/0x60 ...... Call Trace: <TASK> ? __warn+0xa5/0x240 ? bpf_map_lookup_elem+0x54/0x60 ? report_bug+0x1ba/0x1f0 ? handle_bug+0x40/0x80 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1b/0x20 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ? rcu_lockdep_current_cpu_online+0x65/0xb0 ? rcu_is_watching+0x23/0x50 ? bpf_map_lookup_elem+0x54/0x60 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ___bpf_prog_run+0x513/0x3b70 __bpf_prog_run32+0x9d/0xd0 ? __bpf_prog_enter_sleepable_recur+0xad/0x120 ? __bpf_prog_enter_sleepable_recur+0x3e/0x120 bpf_trampoline_6442580665+0x4d/0x1000 __x64_sys_getpgid+0x5/0x30 ? do_syscall_64+0x36/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK>

In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop().

In the Linux kernel, the following vulnerability has been resolved: sched/psi: Fix use-after-free in ep_remove_wait_queue() If a non-root cgroup gets removed when there is a thread that registered trigger and is polling on a pressure file within the cgroup, the polling waitqueue gets freed in the following path: do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy However, the polling thread still has a reference to the pressure file and will access the freed waitqueue when the file is closed or upon exit: fput ep_eventpoll_release ep_free ep_remove_wait_queue remove_wait_queue This results in use-after-free as pasted below. The fundamental problem here is that cgroup_file_release() (and consequently waitqueue's lifetime) is not tied to the file's real lifetime. Using wake_up_pollfree() here might be less than ideal, but it is in line with the comment at commit 42288cb44c4b ("wait: add wake_up_pollfree()") since the waitqueue's lifetime is not tied to file's one and can be considered as another special case. While this would be fixable by somehow making cgroup_file_release() be tied to the fput(), it would require sizable refactoring at cgroups or higher layer which might be more justifiable if we identify more cases like this. BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0 Write of size 4 at addr ffff88810e625328 by task a.out/4404 CPU: 19 PID: 4404 Comm: a.out Not tainted 6.2.0-rc6 #38 Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017 Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 print_report+0x16c/0x4e0 kasan_report+0xc3/0xf0 kasan_check_range+0x2d2/0x310 _raw_spin_lock_irqsave+0x60/0xc0 remove_wait_queue+0x1a/0xa0 ep_free+0x12c/0x170 ep_eventpoll_release+0x26/0x30 __fput+0x202/0x400 task_work_run+0x11d/0x170 do_exit+0x495/0x1130 do_group_exit+0x100/0x100 get_signal+0xd67/0xde0 arch_do_signal_or_restart+0x2a/0x2b0 exit_to_user_mode_prepare+0x94/0x100 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x52/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Allocated by task 4404: kasan_set_track+0x3d/0x60 __kasan_kmalloc+0x85/0x90 psi_trigger_create+0x113/0x3e0 pressure_write+0x146/0x2e0 cgroup_file_write+0x11c/0x250 kernfs_fop_write_iter+0x186/0x220 vfs_write+0x3d8/0x5c0 ksys_write+0x90/0x110 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 4407: kasan_set_track+0x3d/0x60 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x11d/0x170 slab_free_freelist_hook+0x87/0x150 __kmem_cache_free+0xcb/0x180 psi_trigger_destroy+0x2e8/0x310 cgroup_file_release+0x4f/0xb0 kernfs_drain_open_files+0x165/0x1f0 kernfs_drain+0x162/0x1a0 __kernfs_remove+0x1fb/0x310 kernfs_remove_by_name_ns+0x95/0xe0 cgroup_addrm_files+0x67f/0x700 cgroup_destroy_locked+0x283/0x3c0 cgroup_rmdir+0x29/0x100 kernfs_iop_rmdir+0xd1/0x140 vfs_rmdir+0xfe/0x240 do_rmdir+0x13d/0x280 __x64_sys_rmdir+0x2c/0x30 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd