In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check S1G action frame size Before checking the action code, check that it even exists in the frame.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL OPDESC() simply indexes into nfsd4_ops[] by the op's operation number, without range checking that value. It assumes callers are careful to avoid calling it with an out-of-bounds opnum value. nfsd4_decode_compound() is not so careful, and can invoke OPDESC() with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end of nfsd4_ops[].

In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork. syzbot reported the splat below. [0] The repro does the following: 1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes) 2. Attach the prog to a SOCKMAP 3. Add a socket to the SOCKMAP 4. Activate fault injection 5. Send data less than cork_bytes At 5., the data is carried over to the next sendmsg() as it is smaller than the cork_bytes specified by bpf_msg_cork_bytes(). Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold the data, but this fails silently due to fault injection + __GFP_NOWARN. If the allocation fails, we need to revert the sk->sk_forward_alloc change done by sk_msg_alloc(). Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate psock->cork. The "*copied" also needs to be updated such that a proper error can be returned to the caller, sendmsg. It fails to allocate psock->cork. Nothing has been corked so far, so this patch simply sets "*copied" to 0. [0]: WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983 Modules linked in: CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156 Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246 RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80 RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000 RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4 R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380 R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872 FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0 Call Trace: <IRQ> __sk_destruct+0x86/0x660 net/core/sock.c:2339 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861 handle_softirqs+0x286/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: hsr: Prevent use after free in prp_create_tagged_frame() The prp_fill_rct() function can fail. In that situation, it frees the skb and returns NULL. Meanwhile on the success path, it returns the original skb. So it's straight forward to fix bug by using the returned value.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem.

In the Linux kernel, the following vulnerability has been resolved: netlink: prevent potential spectre v1 gadgets Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add length check in indx_get_root This adds a length check to guarantee the retrieved index root is legit. [ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320 [ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243 [ 162.460851] [ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42 [ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 162.462609] Call Trace: [ 162.462954] <TASK> [ 162.463276] dump_stack_lvl+0x49/0x63 [ 162.463822] print_report.cold+0xf5/0x689 [ 162.464608] ? unwind_get_return_address+0x3a/0x60 [ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.466975] kasan_report+0xa7/0x130 [ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0 [ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.468536] __asan_load2+0x68/0x90 [ 162.468923] hdr_find_e.isra.0+0x10c/0x320 [ 162.469282] ? cmp_uints+0xe0/0xe0 [ 162.469557] ? cmp_sdh+0x90/0x90 [ 162.469864] ? ni_find_attr+0x214/0x300 [ 162.470217] ? ni_load_mi+0x80/0x80 [ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.470931] ? ntfs_bread_run+0x190/0x190 [ 162.471307] ? indx_get_root+0xe4/0x190 [ 162.471556] ? indx_get_root+0x140/0x190 [ 162.471833] ? indx_init+0x1e0/0x1e0 [ 162.472069] ? fnd_clear+0x115/0x140 [ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100 [ 162.472731] indx_find+0x184/0x470 [ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 162.474429] ? indx_find_buffer+0x2d0/0x2d0 [ 162.474704] ? do_syscall_64+0x3b/0x90 [ 162.474962] dir_search_u+0x196/0x2f0 [ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450 [ 162.475661] ? ntfs_security_init+0x3d6/0x440 [ 162.475906] ? is_sd_valid+0x180/0x180 [ 162.476191] ntfs_extend_init+0x13f/0x2c0 [ 162.476496] ? ntfs_fix_post_read+0x130/0x130 [ 162.476861] ? iput.part.0+0x286/0x320 [ 162.477325] ntfs_fill_super+0x11e0/0x1b50 [ 162.477709] ? put_ntfs+0x1d0/0x1d0 [ 162.477970] ? vsprintf+0x20/0x20 [ 162.478258] ? set_blocksize+0x95/0x150 [ 162.478538] get_tree_bdev+0x232/0x370 [ 162.478789] ? put_ntfs+0x1d0/0x1d0 [ 162.479038] ntfs_fs_get_tree+0x15/0x20 [ 162.479374] vfs_get_tree+0x4c/0x130 [ 162.479729] path_mount+0x654/0xfe0 [ 162.480124] ? putname+0x80/0xa0 [ 162.480484] ? finish_automount+0x2e0/0x2e0 [ 162.480894] ? putname+0x80/0xa0 [ 162.481467] ? kmem_cache_free+0x1c4/0x440 [ 162.482280] ? putname+0x80/0xa0 [ 162.482714] do_mount+0xd6/0xf0 [ 162.483264] ? path_mount+0xfe0/0xfe0 [ 162.484782] ? __kasan_check_write+0x14/0x20 [ 162.485593] __x64_sys_mount+0xca/0x110 [ 162.486024] do_syscall_64+0x3b/0x90 [ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.487141] RIP: 0033:0x7f9d374e948a [ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a [ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0 [ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020 [ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0 [ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff [ 162.493644] </TASK> [ 162.493908] [ 162.494214] The buggy address belongs to the physical page: [ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc [ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000 [ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 162.500542] page dumped becau ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread() The finalization of nilfs_segctor_thread() can race with nilfs_segctor_kill_thread() which terminates that thread, potentially causing a use-after-free BUG as KASAN detected. At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member of "struct nilfs_sc_info" to indicate the thread has finished, and then notifies nilfs_segctor_kill_thread() of this using waitqueue "sc_wait_task" on the struct nilfs_sc_info. However, here, immediately after the NULL assignment to "sc_task", it is possible that nilfs_segctor_kill_thread() will detect it and return to continue the deallocation, freeing the nilfs_sc_info structure before the thread does the notification. This fixes the issue by protecting the NULL assignment to "sc_task" and its notification, with spinlock "sc_state_lock" of the struct nilfs_sc_info. Since nilfs_segctor_kill_thread() does a final check to see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate the race.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync hci_update_accept_list_sync iterates over hdev->pend_le_conns and hdev->pend_le_reports, and waits for controller events in the loop body, without holding hdev lock. Meanwhile, these lists and the items may be modified e.g. by le_scan_cleanup. This can invalidate the list cursor or any other item in the list, resulting to invalid behavior (eg use-after-free). Use RCU for the hci_conn_params action lists. Since the loop bodies in hci_sync block and we cannot use RCU or hdev->lock for the whole loop, copy list items first and then iterate on the copy. Only the flags field is written from elsewhere, so READ_ONCE/WRITE_ONCE should guarantee we read valid values. Free params everywhere with hci_conn_params_free so the cleanup is guaranteed to be done properly. This fixes the following, which can be triggered e.g. by BlueZ new mgmt-tester case "Add + Remove Device Nowait - Success", or by changing hci_le_set_cig_params to always return false, and running iso-tester: ================================================================== BUG: KASAN: slab-use-after-free in hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) Read of size 8 at addr ffff888001265018 by task kworker/u3:0/32 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl (./arch/x86/include/asm/irqflags.h:134 lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) ? __virt_addr_valid (./include/linux/mmzone.h:1915 ./include/linux/mmzone.h:2011 arch/x86/mm/physaddr.c:65) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) kasan_report (mm/kasan/report.c:538) ? hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2536 net/bluetooth/hci_sync.c:2723 net/bluetooth/hci_sync.c:2841) ? __pfx_hci_update_passive_scan_sync (net/bluetooth/hci_sync.c:2780) ? mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_lock (kernel/locking/mutex.c:282) ? __pfx_mutex_unlock (kernel/locking/mutex.c:538) ? __pfx_update_passive_scan_sync (net/bluetooth/hci_sync.c:2861) hci_cmd_sync_work (net/bluetooth/hci_sync.c:306) process_one_work (./arch/x86/include/asm/preempt.h:27 kernel/workqueue.c:2399) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2538) ? __pfx_worker_thread (kernel/workqueue.c:2480) kthread (kernel/kthread.c:376) ? __pfx_kthread (kernel/kthread.c:331) ret_from_fork (arch/x86/entry/entry_64.S:314) </TASK> Allocated by task 31: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) __kasan_kmalloc (mm/kasan/common.c:374 mm/kasan/common.c:383) hci_conn_params_add (./include/linux/slab.h:580 ./include/linux/slab.h:720 net/bluetooth/hci_core.c:2277) hci_connect_le_scan (net/bluetooth/hci_conn.c:1419 net/bluetooth/hci_conn.c:1589) hci_connect_cis (net/bluetooth/hci_conn.c:2266) iso_connect_cis (net/bluetooth/iso.c:390) iso_sock_connect (net/bluetooth/iso.c:899) __sys_connect (net/socket.c:2003 net/socket.c:2020) __x64_sys_connect (net/socket.c:2027) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Freed by task 15: kasan_save_stack (mm/kasan/common.c:46) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/generic.c:523) __kasan_slab_free (mm/kasan/common.c:238 mm/kasan/common.c:200 mm/kasan/common.c:244) __kmem_cache_free (mm/slub.c:1807 mm/slub.c:3787 mm/slub.c:3800) hci_conn_params_del (net/bluetooth/hci_core.c:2323) le_scan_cleanup (net/bluetooth/hci_conn.c:202) process_one_work (./arch/x86/include/asm/preempt. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid potential vm use-after-free Adding the vm to the vm_xa table makes it visible to userspace, which could try to race with us to close the vm. So we need to take our extra reference before putting it in the table. (cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix RCU use in TDLS fast-xmit This looks up the link under RCU protection, but isn't guaranteed to actually have protection. Fix that.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue.

In the Linux kernel, the following vulnerability has been resolved: staging: ks7010: potential buffer overflow in ks_wlan_set_encode_ext() The "exc->key_len" is a u16 that comes from the user. If it's over IW_ENCODING_TOKEN_MAX (64) that could lead to memory corruption.

In the Linux kernel, the following vulnerability has been resolved: netfilter: allow exp not to be removed in nf_ct_find_expectation Currently nf_conntrack_in() calling nf_ct_find_expectation() will remove the exp from the hash table. However, in some scenario, we expect the exp not to be removed when the created ct will not be confirmed, like in OVS and TC conntrack in the following patches. This patch allows exp not to be removed by setting IPS_CONFIRMED in the status of the tmpl.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount syzbot found an invalid-free in diUnmount: BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674 Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount. If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount(). JFS_IP(ipimap)->i_imap will be freed once again. Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free.

In the Linux kernel, the following vulnerability has been resolved: media: netup_unidvb: fix use-after-free at del_timer() When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync().

In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent kernel bug at submit_bh_wbc() Fix a bug where nilfs_get_block() returns a successful status when searching and inserting the specified block both fail inconsistently. If this inconsistent behavior is not due to a previously fixed bug, then an unexpected race is occurring, so return a temporary error -EAGAIN instead. This prevents callers such as __block_write_begin_int() from requesting a read into a buffer that is not mapped, which would cause the BUG_ON check for the BH_Mapped flag in submit_bh_wbc() to fail.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fail SCO/ISO via hci_conn_failed if ACL gone early Not calling hci_(dis)connect_cfm before deleting conn referred to by a socket generally results to use-after-free. When cleaning up SCO connections when the parent ACL is deleted too early, use hci_conn_failed to do the connection cleanup properly. We also need to clean up ISO connections in a similar situation when connecting has started but LE Create CIS is not yet sent, so do it too here.

In the Linux kernel, the following vulnerability has been resolved: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix use-after-free in pci_bus_release_domain_nr() Commit c14f7ccc9f5d ("PCI: Assign PCI domain IDs by ida_alloc()") introduced a use-after-free bug in the bus removal cleanup. The issue was found with kfence: [ 19.293351] BUG: KFENCE: use-after-free read in pci_bus_release_domain_nr+0x10/0x70 [ 19.302817] Use-after-free read at 0x000000007f3b80eb (in kfence-#115): [ 19.309677] pci_bus_release_domain_nr+0x10/0x70 [ 19.309691] dw_pcie_host_deinit+0x28/0x78 [ 19.309702] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194] [ 19.309734] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194] [ 19.309752] platform_probe+0x90/0xd8 ... [ 19.311457] kfence-#115: 0x00000000063a155a-0x00000000ba698da8, size=1072, cache=kmalloc-2k [ 19.311469] allocated by task 96 on cpu 10 at 19.279323s: [ 19.311562] __kmem_cache_alloc_node+0x260/0x278 [ 19.311571] kmalloc_trace+0x24/0x30 [ 19.311580] pci_alloc_bus+0x24/0xa0 [ 19.311590] pci_register_host_bridge+0x48/0x4b8 [ 19.311601] pci_scan_root_bus_bridge+0xc0/0xe8 [ 19.311613] pci_host_probe+0x18/0xc0 [ 19.311623] dw_pcie_host_init+0x2c0/0x568 [ 19.311630] tegra_pcie_dw_probe+0x610/0xb28 [pcie_tegra194] [ 19.311647] platform_probe+0x90/0xd8 ... [ 19.311782] freed by task 96 on cpu 10 at 19.285833s: [ 19.311799] release_pcibus_dev+0x30/0x40 [ 19.311808] device_release+0x30/0x90 [ 19.311814] kobject_put+0xa8/0x120 [ 19.311832] device_unregister+0x20/0x30 [ 19.311839] pci_remove_bus+0x78/0x88 [ 19.311850] pci_remove_root_bus+0x5c/0x98 [ 19.311860] dw_pcie_host_deinit+0x28/0x78 [ 19.311866] tegra_pcie_deinit_controller+0x1c/0x38 [pcie_tegra194] [ 19.311883] tegra_pcie_dw_probe+0x648/0xb28 [pcie_tegra194] [ 19.311900] platform_probe+0x90/0xd8 ... [ 19.313579] CPU: 10 PID: 96 Comm: kworker/u24:2 Not tainted 6.2.0 #4 [ 19.320171] Hardware name: /, BIOS 1.0-d7fb19b 08/10/2022 [ 19.325852] Workqueue: events_unbound deferred_probe_work_func The stack trace is a bit misleading as dw_pcie_host_deinit() doesn't directly call pci_bus_release_domain_nr(). The issue turns out to be in pci_remove_root_bus() which first calls pci_remove_bus() which frees the struct pci_bus when its struct device is released. Then pci_bus_release_domain_nr() is called and accesses the freed struct pci_bus. Reordering these fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix writeback data corruption cifs writeback doesn't correctly handle the case where cifs_extend_writeback() hits a point where it is considering an additional folio, but this would overrun the wsize - at which point it drops out of the xarray scanning loop and calls xas_pause(). The problem is that xas_pause() advances the loop counter - thereby skipping that page. What needs to happen is for xas_reset() to be called any time we decide we don't want to process the page we're looking at, but rather send the request we are building and start a new one. Fix this by copying and adapting the netfslib writepages code as a temporary measure, with cifs writeback intending to be offloaded to netfslib in the near future. This also fixes the issue with the use of filemap_get_folios_tag() causing retry of a bunch of pages which the extender already dealt with. This can be tested by creating, say, a 64K file somewhere not on cifs (otherwise copy-offload may get underfoot), mounting a cifs share with a wsize of 64000, copying the file to it and then comparing the original file and the copy: dd if=/dev/urandom of=/tmp/64K bs=64k count=1 mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000 cp /tmp/64K /mnt/64K cmp /tmp/64K /mnt/64K Without the fix, the cmp fails at position 64000 (or shortly thereafter).

In the Linux kernel, the following vulnerability has been resolved: EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info The memory for llcc_driv_data is allocated by the LLCC driver. But when it is passed as the private driver info to the EDAC core, it will get freed during the qcom_edac driver release. So when the qcom_edac driver gets probed again, it will try to use the freed data leading to the use-after-free bug. Hence, do not pass llcc_driv_data as pvt_info but rather reference it using the platform_data pointer in the qcom_edac driver.

In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix use after free in vhost_vdpa_probe() The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Collect command failures data only for known commands DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data.

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: tighten bounds checking in decode_message() Copy the bounds checking from encode_message() to decode_message(). This patch addresses the following concerns. Ensure that there is enough space for at least one header so that we don't have a negative size later. if (msg_hdr_len < sizeof(*trans_hdr)) Ensure that we have enough space to read the next header from the msg->data. if (msg_len > msg_hdr_len - sizeof(*trans_hdr)) return -EINVAL; Check that the trans_hdr->len is not below the minimum size: if (hdr_len < sizeof(*trans_hdr)) This minimum check ensures that we don't corrupt memory in decode_passthrough() when we do. memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr)); And finally, use size_add() to prevent an integer overflow: if (size_add(msg_len, hdr_len) > msg_hdr_len)

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix handling of lrbp->cmd ufshcd_queuecommand() may be called two times in a row for a SCSI command before it is completed. Hence make the following changes: - In the functions that submit a command, do not check the old value of lrbp->cmd nor clear lrbp->cmd in error paths. - In ufshcd_release_scsi_cmd(), do not clear lrbp->cmd. See also scsi_send_eh_cmnd(). This commit prevents that the following appears if a command times out: WARNING: at drivers/ufs/core/ufshcd.c:2965 ufshcd_queuecommand+0x6f8/0x9a8 Call trace: ufshcd_queuecommand+0x6f8/0x9a8 scsi_send_eh_cmnd+0x2c0/0x960 scsi_eh_test_devices+0x100/0x314 scsi_eh_ready_devs+0xd90/0x114c scsi_error_handler+0x2b4/0xb70 kthread+0x16c/0x1e0

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_inode's cache, dic may be released, it needs break the loop rather than continuing it, in order to avoid accessing invalid dic pointer.

In the Linux kernel, the following vulnerability has been resolved: padata: Fix refcnt handling in padata_free_shell() In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead to system UAF (Use-After-Free) issues. Due to the lengthy analysis of the pcrypt_aead01 function call, I'll describe the problem scenario using a simplified model: Suppose there's a user of padata named `user_function` that adheres to the padata requirement of calling `padata_free_shell` after `serial()` has been invoked, as demonstrated in the following code: ```c struct request { struct padata_priv padata; struct completion *done; }; void parallel(struct padata_priv *padata) { do_something(); } void serial(struct padata_priv *padata) { struct request *request = container_of(padata, struct request, padata); complete(request->done); } void user_function() { DECLARE_COMPLETION(done) padata->parallel = parallel; padata->serial = serial; padata_do_parallel(); wait_for_completion(&done); padata_free_shell(); } ``` In the corresponding padata.c file, there's the following code: ```c static void padata_serial_worker(struct work_struct *serial_work) { ... cnt = 0; while (!list_empty(&local_list)) { ... padata->serial(padata); cnt++; } local_bh_enable(); if (refcount_sub_and_test(cnt, &pd->refcnt)) padata_free_pd(pd); } ``` Because of the high system load and the accumulation of unexecuted softirq at this moment, `local_bh_enable()` in padata takes longer to execute than usual. Subsequently, when accessing `pd->refcnt`, `pd` has already been released by `padata_free_shell()`, resulting in a UAF issue with `pd->refcnt`. The fix is straightforward: add `refcount_dec_and_test` before calling `padata_free_pd` in `padata_free_shell`.

In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Check start of empty przs during init After commit 30696378f68a ("pstore/ram: Do not treat empty buffers as valid"), initialization would assume a prz was valid after seeing that the buffer_size is zero (regardless of the buffer start position). This unchecked start value means it could be outside the bounds of the buffer, leading to future access panics when written to: sysdump_panic_event+0x3b4/0x5b8 atomic_notifier_call_chain+0x54/0x90 panic+0x1c8/0x42c die+0x29c/0x2a8 die_kernel_fault+0x68/0x78 __do_kernel_fault+0x1c4/0x1e0 do_bad_area+0x40/0x100 do_translation_fault+0x68/0x80 do_mem_abort+0x68/0xf8 el1_da+0x1c/0xc0 __raw_writeb+0x38/0x174 __memcpy_toio+0x40/0xac persistent_ram_update+0x44/0x12c persistent_ram_write+0x1a8/0x1b8 ramoops_pstore_write+0x198/0x1e8 pstore_console_write+0x94/0xe0 ... To avoid this, also check if the prz start is 0 during the initialization phase. If not, the next prz sanity check case will discover it (start > size) and zap the buffer back to a sane state. [kees: update commit log with backtrace and clarifications]

In the Linux kernel, the following vulnerability has been resolved: firewire: net: fix use after free in fwnet_finish_incoming_packet() The netif_rx() function frees the skb so we can't dereference it to save the skb->len.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: prevent potential string overflow The dev->id value comes from ida_alloc() so it's a number between zero and INT_MAX. If it's too high then these sprintf()s will overflow.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler We do check for target CPU == -1, but this might change at the time we are going to use it. Hold the physical target CPU in a local variable to avoid out-of-bound accesses to the cpu arrays.

In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free Struct pcie_link_state->downstream is a pointer to the pci_dev of function 0. Previously we retained that pointer when removing function 0, and subsequent ASPM policy changes dereferenced it, resulting in a use-after-free warning from KASAN, e.g.: # echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove # echo powersave > /sys/module/pcie_aspm/parameters/policy BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500 Call Trace: kasan_report+0xae/0xe0 pcie_config_aspm_link+0x42d/0x500 pcie_aspm_set_policy+0x8e/0x1a0 param_attr_store+0x162/0x2c0 module_attr_store+0x3e/0x80 PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM Control value in all functions of multi-function devices. Disable ASPM and free the pcie_link_state when any child function is removed so we can discard the dangling pcie_link_state->downstream pointer and maintain the same ASPM Control configuration for all functions. [bhelgaas: commit log and comment]

In the Linux kernel, the following vulnerability has been resolved: ip_vti: fix potential slab-use-after-free in decode_session6 When ip_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ip_vti device sends IPv6 packets. As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output syzkaller reportes a KASAN issue with stack-out-of-bounds. The call trace is as follows: dump_stack+0x9c/0xd3 print_address_description.constprop.0+0x19/0x170 __kasan_report.cold+0x6c/0x84 kasan_report+0x3a/0x50 __perf_event_header__init_id+0x34/0x290 perf_event_header__init_id+0x48/0x60 perf_output_begin+0x4a4/0x560 perf_event_bpf_output+0x161/0x1e0 perf_iterate_sb_cpu+0x29e/0x340 perf_iterate_sb+0x4c/0xc0 perf_event_bpf_event+0x194/0x2c0 __bpf_prog_put.constprop.0+0x55/0xf0 __cls_bpf_delete_prog+0xea/0x120 [cls_bpf] cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf] process_one_work+0x3c2/0x730 worker_thread+0x93/0x650 kthread+0x1b8/0x210 ret_from_fork+0x1f/0x30 commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()") use on-stack struct perf_sample_data of the caller function. However, perf_event_bpf_output uses incorrect parameter to convert small-sized data (struct perf_bpf_event) into large-sized data (struct perf_sample_data), which causes memory overwriting occurs in __perf_event_header__init_id.

In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Clean dangling pointer on bind error path mtk_drm_bind() can fail, in which case drm_dev_put() is called, destroying the drm_device object. However a pointer to it was still being held in the private object, and that pointer would be passed along to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that point, resulting in a panic. Clean the pointer when destroying the object in the error path to prevent this from happening.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays.

In the Linux kernel, the following vulnerability has been resolved: net: nfc: Fix use-after-free in local_cleanup() Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301)

In the Linux kernel, the following vulnerability has been resolved: nvmet: avoid potential UAF in nvmet_req_complete() An nvme target ->queue_response() operation implementation may free the request passed as argument. Such implementation potentially could result in a use after free of the request pointer when percpu_ref_put() is called in nvmet_req_complete(). Avoid such problem by using a local variable to save the sq pointer before calling __nvmet_req_complete(), thus avoiding dereferencing the req pointer after that function call.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function When a reset notify IPC message is received, the ISR schedules a work function and passes the ISHTP device to it via a global pointer ishtp_dev. If ish_probe() fails, the devm-managed device resources including ishtp_dev are freed, but the work is not cancelled, causing a use-after-free when the work function tries to access ishtp_dev. Use devm_work_autocancel() instead, so that the work is automatically cancelled if probe fails.

In the Linux kernel, the following vulnerability has been resolved: vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa max vqp attr to avoid such bugs.

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid data corruption caused by decline We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Don't balance task to its current running CPU We've run into the case that the balancer tries to balance a migration disabled task and trigger the warning in set_task_cpu() like below: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240 Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip> CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021 pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : set_task_cpu+0x188/0x240 lr : load_balance+0x5d0/0xc60 sp : ffff80000803bc70 x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040 x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001 x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78 x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000 x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530 x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001 Call trace: set_task_cpu+0x188/0x240 load_balance+0x5d0/0xc60 rebalance_domains+0x26c/0x380 _nohz_idle_balance.isra.0+0x1e0/0x370 run_rebalance_domains+0x6c/0x80 __do_softirq+0x128/0x3d8 ____do_softirq+0x18/0x24 call_on_irq_stack+0x2c/0x38 do_softirq_own_stack+0x24/0x3c __irq_exit_rcu+0xcc/0xf4 irq_exit_rcu+0x18/0x24 el1_interrupt+0x4c/0xe4 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x18/0x4c default_idle_call+0x58/0x194 do_idle+0x244/0x2b0 cpu_startup_entry+0x30/0x3c secondary_start_kernel+0x14c/0x190 __secondary_switched+0xb0/0xb4 ---[ end trace 0000000000000000 ]--- Further investigation shows that the warning is superfluous, the migration disabled task is just going to be migrated to its current running CPU. This is because that on load balance if the dst_cpu is not allowed by the task, we'll re-select a new_dst_cpu as a candidate. If no task can be balanced to dst_cpu we'll try to balance the task to the new_dst_cpu instead. In this case when the migration disabled task is not on CPU it only allows to run on its current CPU, load balance will select its current CPU as new_dst_cpu and later triggers the warning above. The new_dst_cpu is chosen from the env->dst_grpmask. Currently it contains CPUs in sched_group_span() and if we have overlapped groups it's possible to run into this case. This patch makes env->dst_grpmask of group_balance_mask() which exclude any CPUs from the busiest group and solve the issue. For balancing in a domain with no overlapped groups the behaviour keeps same as before.

In the Linux kernel, the following vulnerability has been resolved: vp_vdpa: fix the crash in hot unplug with vp_vdpa While unplugging the vp_vdpa device, it triggers a kernel panic The root cause is: vdpa_mgmtdev_unregister() will accesses modern devices which will cause a use after free. So need to change the sequence in vp_vdpa_remove [ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014 [ 195.004012] #PF: supervisor read access in kernel mode [ 195.004486] #PF: error_code(0x0000) - not-present page [ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0 [ 195.005578] Oops: 0000 1 PREEMPT SMP PTI [ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1 [ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown [ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 195.008059] RIP: 0010:ioread8+0x31/0x80 [ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7 [ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292 [ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0 [ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014 [ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68 [ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120 [ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805 [ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000 [ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0 [ 195.015741] PKRU: 55555554 [ 195.016001] Call Trace: [ 195.016233] <TASK> [ 195.016434] vp_modern_get_status+0x12/0x20 [ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa] [ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa] [ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net] [ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net] [ 195.018618] virtio_dev_remove+0x3d/0x90 [ 195.018986] device_release_driver_internal+0x1aa/0x230 [ 195.019466] bus_remove_device+0xd8/0x150 [ 195.019841] device_del+0x18b/0x3f0 [ 195.020167] ? kernfs_find_ns+0x35/0xd0 [ 195.020526] device_unregister+0x13/0x60 [ 195.020894] unregister_virtio_device+0x11/0x20 [ 195.021311] device_release_driver_internal+0x1aa/0x230 [ 195.021790] bus_remove_device+0xd8/0x150 [ 195.022162] device_del+0x18b/0x3f0 [ 195.022487] device_unregister+0x13/0x60 [ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa] [ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa] [ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa] [ 195.024115] bus_for_each_dev+0x78/0xc0 [ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa] [ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa] [ 195.025353] pci_device_remove+0x36/0xa0 [ 195.025719] device_release_driver_internal+0x1aa/0x230 [ 195.026201] pci_stop_bus_device+0x6c/0x90 [ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20 [ 195.027039] disable_slot+0x49/0x90 [ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90 [ 195.027832] hotplug_event+0xea/0x210 [ 195.028171] ? hotplug_event+0x210/0x210 [ 195.028535] acpiphp_hotplug_notify+0x22/0x80 [ 195.028942] ? hotplug_event+0x210/0x210 [ 195.029303] acpi_device_hotplug+0x8a/0x1d0 [ 195.029690] acpi_hotplug_work_fn+0x1a/0x30 [ 195.030077] process_one_work+0x1e8/0x3c0 [ 195.030451] worker_thread+0x50/0x3b0 [ 195.030791] ? rescuer_thread+0x3a0/0x3a0 [ 195.031165] kthread+0xd9/0x100 [ 195.031459] ? kthread_complete_and_exit+0x20/0x20 [ 195.031899] ret_from_fork+0x22/0x30 [ 195.032233] </TASK>

In the Linux kernel, the following vulnerability has been resolved: block: ublk: extending queue_size to fix overflow When validating drafted SPDK ublk target, in a case that assigning large queue depth to multiqueue ublk device, ublk target would run into a weird incorrect state. During rounds of review and debug, An overflow bug was found in ublk driver. In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means each ublk queue depth can be set as large as 4096. But when setting qd for a ublk device, sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io) will be larger than 65535 if qd is larger than 2728. Then queue_size is overflowed, and ublk_get_queue() references a wrong pointer position. The wrong content of ublk_queue elements will lead to out-of-bounds memory access. Extend queue_size in ublk_device as "unsigned int".

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt8183: Add back SSPM related clocks This reverts commit 860690a93ef23b567f781c1b631623e27190f101. On the MT8183, the SSPM related clocks were removed claiming a lack of usage. This however causes some issues when the driver was converted to the new simple-probe mechanism. This mechanism allocates enough space for all the clocks defined in the clock driver, not the highest index in the DT binding. This leads to out-of-bound writes if their are holes in the DT binding or the driver (due to deprecated or unimplemented clocks). These errors can go unnoticed and cause memory corruption, leading to crashes in unrelated areas, or nothing at all. KASAN will detect them. Add the SSPM related clocks back to the MT8183 clock driver to fully implement the DT binding. The SSPM clocks are for the power management co-processor, and should never be turned off. They are marked as such.

In the Linux kernel, the following vulnerability has been resolved: udf: Do not bother merging very long extents When merging very long extents we try to push as much length as possible to the first extent. However this is unnecessarily complicated and not really worth the trouble. Furthermore there was a bug in the logic resulting in corrupting extents in the file as syzbot reproducer shows. So just don't bother with the merging of extents that are too long together.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix warning and UAF when destroy the MR list If the MR allocate failed, the MR recovery work not initialized and list not cleared. Then will be warning and UAF when release the MR: WARNING: CPU: 4 PID: 824 at kernel/workqueue.c:3066 __flush_work.isra.0+0xf7/0x110 CPU: 4 PID: 824 Comm: mount.cifs Not tainted 6.1.0-rc5+ #82 RIP: 0010:__flush_work.isra.0+0xf7/0x110 Call Trace: <TASK> __cancel_work_timer+0x2ba/0x2e0 smbd_destroy+0x4e1/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 BUG: KASAN: use-after-free in smbd_destroy+0x4fc/0x990 Read of size 8 at addr ffff88810b156a08 by task mount.cifs/824 CPU: 4 PID: 824 Comm: mount.cifs Tainted: G W 6.1.0-rc5+ #82 Call Trace: dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 smbd_destroy+0x4fc/0x990 _smbd_get_connection+0x1cbd/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Allocated by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x7a/0x90 _smbd_get_connection+0x1b6f/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 824: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 __kmem_cache_free+0xc8/0x330 _smbd_get_connection+0x1c6a/0x2110 smbd_get_connection+0x21/0x40 cifs_get_tcp_session+0x8ef/0xda0 mount_get_conns+0x60/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Let's initialize the MR recovery work before MR allocate to prevent the warning, remove the MRs from the list to prevent the UAF.