In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction The commit 59c68ac31e15 ("iw_cm: free cm_id resources on the last deref") simplified cm_id resource management by freeing cm_id once all references to the cm_id were removed. The references are removed either upon completion of iw_cm event handlers or when the application destroys the cm_id. This commit introduced the use-after-free condition where cm_id_private object could still be in use by event handler works during the destruction of cm_id. The commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs") addressed this use-after- free by flushing all pending works at the cm_id destruction. However, still another use-after-free possibility remained. It happens with the work objects allocated for each cm_id_priv within alloc_work_entries() during cm_id creation, and subsequently freed in dealloc_work_entries() once all references to the cm_id are removed. If the cm_id's last reference is decremented in the event handler work, the work object for the work itself gets removed, and causes the use- after-free BUG below: BUG: KASAN: slab-use-after-free in __pwq_activate_work+0x1ff/0x250 Read of size 8 at addr ffff88811f9cf800 by task kworker/u16:1/147091 CPU: 2 UID: 0 PID: 147091 Comm: kworker/u16:1 Not tainted 6.15.0-rc2+ #27 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 Workqueue: 0x0 (iw_cm_wq) Call Trace: <TASK> dump_stack_lvl+0x6a/0x90 print_report+0x174/0x554 ? __virt_addr_valid+0x208/0x430 ? __pwq_activate_work+0x1ff/0x250 kasan_report+0xae/0x170 ? __pwq_activate_work+0x1ff/0x250 __pwq_activate_work+0x1ff/0x250 pwq_dec_nr_in_flight+0x8c5/0xfb0 process_one_work+0xc11/0x1460 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x16c/0x240 worker_thread+0x5ef/0xfd0 ? __pfx_worker_thread+0x10/0x10 kthread+0x3b0/0x770 ? __pfx_kthread+0x10/0x10 ? rcu_is_watching+0x11/0xb0 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 147416: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 alloc_work_entries+0xa9/0x260 [iw_cm] iw_cm_connect+0x23/0x4a0 [iw_cm] rdma_connect_locked+0xbfd/0x1920 [rdma_cm] nvme_rdma_cm_handler+0x8e5/0x1b60 [nvme_rdma] cma_cm_event_handler+0xae/0x320 [rdma_cm] cma_work_handler+0x106/0x1b0 [rdma_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Freed by task 147091: kasan_save_stack+0x2c/0x50 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60 __kasan_slab_free+0x4b/0x70 kfree+0x13a/0x4b0 dealloc_work_entries+0x125/0x1f0 [iw_cm] iwcm_deref_id+0x6f/0xa0 [iw_cm] cm_work_handler+0x136/0x1ba0 [iw_cm] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x2c/0x50 kasan_record_aux_stack+0xa3/0xb0 __queue_work+0x2ff/0x1390 queue_work_on+0x67/0xc0 cm_event_handler+0x46a/0x820 [iw_cm] siw_cm_upcall+0x330/0x650 [siw] siw_cm_work_handler+0x6b9/0x2b20 [siw] process_one_work+0x84f/0x1460 worker_thread+0x5ef/0xfd0 kthread+0x3b0/0x770 ret_from_fork+0x30/0x70 ret_from_fork_asm+0x1a/0x30 This BUG is reproducible by repeating the blktests test case nvme/061 for the rdma transport and the siw driver. To avoid the use-after-free of cm_id_private work objects, ensure that the last reference to the cm_id is decremented not in the event handler works, but in the cm_id destruction context. For that purpose, mo ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF in decryption with multichannel After commit f7025d861694 ("smb: client: allocate crypto only for primary server") and commit b0abcd65ec54 ("smb: client: fix UAF in async decryption"), the channels started reusing AEAD TFM from primary channel to perform synchronous decryption, but that can't done as there could be multiple cifsd threads (one per channel) simultaneously accessing it to perform decryption. This fixes the following KASAN splat when running fstest generic/249 with 'vers=3.1.1,multichannel,max_channels=4,seal' against Windows Server 2022: BUG: KASAN: slab-use-after-free in gf128mul_4k_lle+0xba/0x110 Read of size 8 at addr ffff8881046c18a0 by task cifsd/986 CPU: 3 UID: 0 PID: 986 Comm: cifsd Not tainted 6.15.0-rc1 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-3.fc41 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 print_report+0x156/0x528 ? gf128mul_4k_lle+0xba/0x110 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? gf128mul_4k_lle+0xba/0x110 kasan_report+0xdf/0x1a0 ? gf128mul_4k_lle+0xba/0x110 gf128mul_4k_lle+0xba/0x110 ghash_update+0x189/0x210 shash_ahash_update+0x295/0x370 ? __pfx_shash_ahash_update+0x10/0x10 ? __pfx_shash_ahash_update+0x10/0x10 ? __pfx_extract_iter_to_sg+0x10/0x10 ? ___kmalloc_large_node+0x10e/0x180 ? __asan_memset+0x23/0x50 crypto_ahash_update+0x3c/0xc0 gcm_hash_assoc_remain_continue+0x93/0xc0 crypt_message+0xe09/0xec0 [cifs] ? __pfx_crypt_message+0x10/0x10 [cifs] ? _raw_spin_unlock+0x23/0x40 ? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs] decrypt_raw_data+0x229/0x380 [cifs] ? __pfx_decrypt_raw_data+0x10/0x10 [cifs] ? __pfx_cifs_read_iter_from_socket+0x10/0x10 [cifs] smb3_receive_transform+0x837/0xc80 [cifs] ? __pfx_smb3_receive_transform+0x10/0x10 [cifs] ? __pfx___might_resched+0x10/0x10 ? __pfx_smb3_is_transform_hdr+0x10/0x10 [cifs] cifs_demultiplex_thread+0x692/0x1570 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? rcu_lockdep_current_cpu_online+0x62/0xb0 ? find_held_lock+0x32/0x90 ? kvm_sched_clock_read+0x11/0x20 ? local_clock_noinstr+0xd/0xd0 ? trace_irq_enable.constprop.0+0xa8/0xe0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x1fe/0x380 ? kthread+0x10f/0x380 ? __pfx_kthread+0x10/0x10 ? local_clock_noinstr+0xd/0xd0 ? ret_from_fork+0x1b/0x60 ? local_clock+0x15/0x30 ? lock_release+0x29b/0x390 ? rcu_is_watching+0x20/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>

There is a use-after-free vulnerability in the Linux Kernel which can be exploited to achieve local privilege escalation. To reach the vulnerability kernel configuration flag CONFIG_TLS or CONFIG_XFRM_ESPINTCP has to be configured, but the operation does not require any privilege. There is a use-after-free bug of icsk_ulp_data of a struct inet_connection_sock. When CONFIG_TLS is enabled, user can install a tls context (struct tls_context) on a connected tcp socket. The context is not cleared if this socket is disconnected and reused as a listener. If a new socket is created from the listener, the context is inherited and vulnerable. The setsockopt TCP_ULP operation does not require any privilege. We recommend upgrading past commit 2c02d41d71f90a5168391b6a5f2954112ba2307c

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: take paired job reference For paired jobs, have the fragment job take a reference on the geometry job, so that the geometry job cannot be freed until the fragment job has finished with it. The geometry job structure is accessed when the fragment job is being prepared by the GPU scheduler. Taking the reference prevents the geometry job being freed until the fragment job no longer requires it. Fixes a use after free bug detected by KASAN: [ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr] [ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63

In the Linux kernel, the following vulnerability has been resolved: iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with iio_for_each_active_channel()) without making sure the indio_dev stays in buffer mode. There is a race if indio_dev exits buffer mode in the middle of the interrupt that flushes the fifo. Fix this by calling synchronize_irq() to ensure that no interrupt is currently running when disabling buffer mode. Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [...] _find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290 fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178 fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c irq_thread_fn from irq_thread+0x110/0x1f4 irq_thread from kthread+0xe0/0xfc kthread from ret_from_fork+0x14/0x2c

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode() With ACPI in place, gicv2m_get_fwnode() is registered with the pci subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime during a PCI host bridge probe. But, the call back is wrongly marked as __init, causing it to be freed, while being registered with the PCI subsystem and could trigger: Unable to handle kernel paging request at virtual address ffff8000816c0400 gicv2m_get_fwnode+0x0/0x58 (P) pci_set_bus_msi_domain+0x74/0x88 pci_register_host_bridge+0x194/0x548 This is easily reproducible on a Juno board with ACPI boot. Retain the function for later use.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix UAF when lookup kallsym after ftrace disabled The following issue happens with a buggy module: BUG: unable to handle page fault for address: ffffffffc05d0218 PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS RIP: 0010:sized_strscpy+0x81/0x2f0 RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000 RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68 R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038 R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ftrace_mod_get_kallsym+0x1ac/0x590 update_iter_mod+0x239/0x5b0 s_next+0x5b/0xa0 seq_read_iter+0x8c9/0x1070 seq_read+0x249/0x3b0 proc_reg_read+0x1b0/0x280 vfs_read+0x17f/0x920 ksys_read+0xf3/0x1c0 do_syscall_64+0x5f/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue may happen as follows: (1) Add kprobe tracepoint; (2) insmod test.ko; (3) Module triggers ftrace disabled; (4) rmmod test.ko; (5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed; ftrace_mod_get_kallsym() ... strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); ... The problem is when a module triggers an issue with ftrace and sets ftrace_disable. The ftrace_disable is set when an anomaly is discovered and to prevent any more damage, ftrace stops all text modification. The issue that happened was that the ftrace_disable stops more than just the text modification. When a module is loaded, its init functions can also be traced. Because kallsyms deletes the init functions after a module has loaded, ftrace saves them when the module is loaded and function tracing is enabled. This allows the output of the function trace to show the init function names instead of just their raw memory addresses. When a module is removed, ftrace_release_mod() is called, and if ftrace_disable is set, it just returns without doing anything more. The problem here is that it leaves the mod_list still around and if kallsyms is called, it will call into this code and access the module memory that has already been freed as it will return: strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); Where the "mod" no longer exists and triggers a UAF bug.

In the Linux kernel, the following vulnerability has been resolved: zloop: fix KASAN use-after-free of tag set When a zoned loop device, or zloop device, is removed, KASAN enabled kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The BUG happens because zloop_ctl_remove() calls put_disk(), which invokes zloop_free_disk(). The zloop_free_disk() frees the memory allocated for the zlo pointer. However, after the memory is freed, zloop_ctl_remove() calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo. Hence the KASAN use-after-free. zloop_ctl_remove() put_disk(zlo->disk) put_device() kobject_put() ... zloop_free_disk() kvfree(zlo) blk_mq_free_tag_set(&zlo->tag_set) To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set) from zloop_ctl_remove() into zloop_free_disk(). This ensures that the tag_set is freed before the call to kvfree(zlo).

In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned().

In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class with netem as child qdisc As described in Gerrard's report [1], we have a UAF case when an hfsc class has a netem child qdisc. The crux of the issue is that hfsc is assuming that checking for cl->qdisc->q.qlen == 0 guarantees that it hasn't inserted the class in the vttree or eltree (which is not true for the netem duplicate case). This patch checks the n_active class variable to make sure that the code won't insert the class in the vttree or eltree twice, catering for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made.

In the Linux kernel, the following vulnerability has been resolved: vsock: Do not allow binding to VMADDR_PORT_ANY It is possible for a vsock to autobind to VMADDR_PORT_ANY. This can cause a use-after-free when a connection is made to the bound socket. The socket returned by accept() also has port VMADDR_PORT_ANY but is not on the list of unbound sockets. Binding it will result in an extra refcount decrement similar to the one fixed in fcdd2242c023 (vsock: Keep the binding until socket destruction). Modify the check in __vsock_bind_connectible() to also prevent binding to VMADDR_PORT_ANY.

In the Linux kernel, the following vulnerability has been resolved: net: atm: add lec_mutex syzbot found its way in net/atm/lec.c, and found an error path in lecd_attach() could leave a dangling pointer in dev_lec[]. Add a mutex to protect dev_lecp[] uses from lecd_attach(), lec_vcc_attach() and lec_mcast_attach(). Following patch will use this mutex for /proc/net/atm/lec. BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline] BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142 CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xcd/0x680 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 lecd_attach net/atm/lec.c:751 [inline] lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4328 [inline] __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015 alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711 lecd_attach net/atm/lec.c:737 [inline] lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4842 free_netdev+0x6c5/0x910 net/core/dev.c:11892 lecd_attach net/atm/lec.c:744 [inline] lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix ECVF vports unload on shutdown flow Fix shutdown flow UAF when a virtual function is created on the embedded chip (ECVF) of a BlueField device. In such case the vport acl ingress table is not properly destroyed. ECVF functionality is independent of ecpf_vport_exists capability and thus functions mlx5_eswitch_(enable|disable)_pf_vf_vports() should not test it when enabling/disabling ECVF vports. kernel log: [] refcount_t: underflow; use-after-free. [] WARNING: CPU: 3 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0x124/0x220 ---------------- [] Call trace: [] refcount_warn_saturate+0x124/0x220 [] tree_put_node+0x164/0x1e0 [mlx5_core] [] mlx5_destroy_flow_table+0x98/0x2c0 [mlx5_core] [] esw_acl_ingress_table_destroy+0x28/0x40 [mlx5_core] [] esw_acl_ingress_lgcy_cleanup+0x80/0xf4 [mlx5_core] [] esw_legacy_vport_acl_cleanup+0x44/0x60 [mlx5_core] [] esw_vport_cleanup+0x64/0x90 [mlx5_core] [] mlx5_esw_vport_disable+0xc0/0x1d0 [mlx5_core] [] mlx5_eswitch_unload_ec_vf_vports+0xcc/0x150 [mlx5_core] [] mlx5_eswitch_disable_sriov+0x198/0x2a0 [mlx5_core] [] mlx5_device_disable_sriov+0xb8/0x1e0 [mlx5_core] [] mlx5_sriov_detach+0x40/0x50 [mlx5_core] [] mlx5_unload+0x40/0xc4 [mlx5_core] [] mlx5_unload_one_devl_locked+0x6c/0xe4 [mlx5_core] [] mlx5_unload_one+0x3c/0x60 [mlx5_core] [] shutdown+0x7c/0xa4 [mlx5_core] [] pci_device_shutdown+0x3c/0xa0 [] device_shutdown+0x170/0x340 [] __do_sys_reboot+0x1f4/0x2a0 [] __arm64_sys_reboot+0x2c/0x40 [] invoke_syscall+0x78/0x100 [] el0_svc_common.constprop.0+0x54/0x184 [] do_el0_svc+0x30/0xac [] el0_svc+0x48/0x160 [] el0t_64_sync_handler+0xa4/0x12c [] el0t_64_sync+0x1a4/0x1a8 [] --[ end trace 9c4601d68c70030e ]---

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge", v2. Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. However, it is handling merges incorrectly when it comes to mremap() of a faulted VMA adjacent to an unfaulted VMA. The issues arise in three cases: 1. Previous VMA unfaulted: copied -----| v |-----------|.............| | unfaulted |(faulted VMA)| |-----------|.............| prev 2. Next VMA unfaulted: copied -----| v |.............|-----------| |(faulted VMA)| unfaulted | |.............|-----------| next 3. Both adjacent VMAs unfaulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| unfaulted | |-----------|.............|-----------| prev next This series fixes each of these cases, and introduces self tests to assert that the issues are corrected. I also test a further case which was already handled, to assert that my changes continues to correctly handle it: 4. prev unfaulted, next faulted: copied -----| v |-----------|.............|-----------| | unfaulted |(faulted VMA)| faulted | |-----------|.............|-----------| prev next This bug was discovered via a syzbot report, linked to in the first patch in the series, I confirmed that this series fixes the bug. I also discovered that we are failing to check that the faulted VMA was not forked when merging a copied VMA in cases 1-3 above, an issue this series also addresses. I also added self tests to assert that this is resolved (and confirmed that the tests failed prior to this). I also cleaned up vma_expand() as part of this work, renamed vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was unduly confusing, and simplified the comments around this function. This patch (of 4): Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA merges") introduced the ability to merge previously unavailable VMA merge scenarios. The key piece of logic introduced was the ability to merge a faulted VMA immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to correctly handle anon_vma state. In the case of the merge of an existing VMA (that is changing properties of a VMA and then merging if those properties are shared by adjacent VMAs), dup_anon_vma() is invoked correctly. However in the case of the merge of a new VMA, a corner case peculiar to mremap() was missed. The issue is that vma_expand() only performs dup_anon_vma() if the target (the VMA that will ultimately become the merged VMA): is not the next VMA, i.e. the one that appears after the range in which the new VMA is to be established. A key insight here is that in all other cases other than mremap(), a new VMA merge either expands an existing VMA, meaning that the target VMA will be that VMA, or would have anon_vma be NULL. Specifically: * __mmap_region() - no anon_vma in place, initial mapping. * do_brk_flags() - expanding an existing VMA. * vma_merge_extend() - expanding an existing VMA. * relocate_vma_down() - no anon_vma in place, initial mapping. In addition, we are in the unique situation of needing to duplicate anon_vma state from a VMA that is neither the previous or next VMA being merged with. dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted case. This leaves four possibilities, in each case where the copied VMA is faulted: 1. Previous VMA unfaulted: copied -----| ---truncated---

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails When scpi probe fails, at any point, we need to ensure that the scpi_info is not set and will remain NULL until the probe succeeds. If it is not taken care, then it could result use-after-free as the value is exported via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc() but freed when the probe fails.

A flaw was found in the crypto subsystem of the Linux kernel before version kernel-4.15-rc4. The "null skcipher" was being dropped when each af_alg_ctx was freed instead of when the aead_tfm was freed. This can cause the null skcipher to be freed while it is still in use leading to a local user being able to crash the system or possibly escalate privileges.

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. When nf_tables_delrule() is flushing table rules, it is not checked whether the chain is bound and the chain's owner rule can also release the objects in certain circumstances. We recommend upgrading past commit 6eaf41e87a223ae6f8e7a28d6e78384ad7e407f8.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct() ctnetlink_dump_exp_ct() stores a conntrack pointer in cb->data for the netlink dump callback ctnetlink_exp_ct_dump_table(), but drops the conntrack reference immediately after netlink_dump_start(). When the dump spans multiple rounds, the second recvmsg() triggers the dump callback which dereferences the now-freed conntrack via nfct_help(ct), leading to a use-after-free on ct->ext. The bug is that the netlink_dump_control has no .start or .done callbacks to manage the conntrack reference across dump rounds. Other dump functions in the same file (e.g. ctnetlink_get_conntrack) properly use .start/.done callbacks for this purpose. Fix this by adding .start and .done callbacks that hold and release the conntrack reference for the duration of the dump, and move the nfct_help() call after the cb->args[0] early-return check in the dump callback to avoid dereferencing ct->ext unnecessarily. BUG: KASAN: slab-use-after-free in ctnetlink_exp_ct_dump_table+0x4f/0x2e0 Read of size 8 at addr ffff88810597ebf0 by task ctnetlink_poc/133 CPU: 1 UID: 0 PID: 133 Comm: ctnetlink_poc Not tainted 7.0.0-rc2+ #3 PREEMPTLAZY Call Trace: <TASK> ctnetlink_exp_ct_dump_table+0x4f/0x2e0 netlink_dump+0x333/0x880 netlink_recvmsg+0x3e2/0x4b0 ? aa_sk_perm+0x184/0x450 sock_recvmsg+0xde/0xf0 Allocated by task 133: kmem_cache_alloc_noprof+0x134/0x440 __nf_conntrack_alloc+0xa8/0x2b0 ctnetlink_create_conntrack+0xa1/0x900 ctnetlink_new_conntrack+0x3cf/0x7d0 nfnetlink_rcv_msg+0x48e/0x510 netlink_rcv_skb+0xc9/0x1f0 nfnetlink_rcv+0xdb/0x220 netlink_unicast+0x3ec/0x590 netlink_sendmsg+0x397/0x690 __sys_sendmsg+0xf4/0x180 Freed by task 0: slab_free_after_rcu_debug+0xad/0x1e0 rcu_core+0x5c3/0x9c0

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of signing key Customers have reported use-after-free in @ses->auth_key.response with SMB2.1 + sign mounts which occurs due to following race: task A task B cifs_mount() dfs_mount_share() get_session() cifs_mount_get_session() cifs_send_recv() cifs_get_smb_ses() compound_send_recv() cifs_setup_session() smb2_setup_request() kfree_sensitive() smb2_calc_signature() crypto_shash_setkey() *UAF* Fix this by ensuring that we have a valid @ses->auth_key.response by checking whether @ses->ses_status is SES_GOOD or SES_EXITING with @ses->ses_lock held. After commit 24a9799aa8ef ("smb: client: fix UAF in smb2_reconnect_server()"), we made sure to call ->logoff() only when @ses was known to be good (e.g. valid ->auth_key.response), so it's safe to access signing key when @ses->ses_status == SES_EXITING.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate data run offset This adds sanity checks for data run offset. We should make sure data run offset is legit before trying to unpack them, otherwise we may encounter use-after-free or some unexpected memory access behaviors. [ 82.940342] BUG: KASAN: use-after-free in run_unpack+0x2e3/0x570 [ 82.941180] Read of size 1 at addr ffff888008a8487f by task mount/240 [ 82.941670] [ 82.942069] CPU: 0 PID: 240 Comm: mount Not tainted 5.19.0+ #15 [ 82.942482] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 82.943720] Call Trace: [ 82.944204] <TASK> [ 82.944471] dump_stack_lvl+0x49/0x63 [ 82.944908] print_report.cold+0xf5/0x67b [ 82.945141] ? __wait_on_bit+0x106/0x120 [ 82.945750] ? run_unpack+0x2e3/0x570 [ 82.946626] kasan_report+0xa7/0x120 [ 82.947046] ? run_unpack+0x2e3/0x570 [ 82.947280] __asan_load1+0x51/0x60 [ 82.947483] run_unpack+0x2e3/0x570 [ 82.947709] ? memcpy+0x4e/0x70 [ 82.947927] ? run_pack+0x7a0/0x7a0 [ 82.948158] run_unpack_ex+0xad/0x3f0 [ 82.948399] ? mi_enum_attr+0x14a/0x200 [ 82.948717] ? run_unpack+0x570/0x570 [ 82.949072] ? ni_enum_attr_ex+0x1b2/0x1c0 [ 82.949332] ? ni_fname_type.part.0+0xd0/0xd0 [ 82.949611] ? mi_read+0x262/0x2c0 [ 82.949970] ? ntfs_cmp_names_cpu+0x125/0x180 [ 82.950249] ntfs_iget5+0x632/0x1870 [ 82.950621] ? ntfs_get_block_bmap+0x70/0x70 [ 82.951192] ? evict+0x223/0x280 [ 82.951525] ? iput.part.0+0x286/0x320 [ 82.951969] ntfs_fill_super+0x1321/0x1e20 [ 82.952436] ? put_ntfs+0x1d0/0x1d0 [ 82.952822] ? vsprintf+0x20/0x20 [ 82.953188] ? mutex_unlock+0x81/0xd0 [ 82.953379] ? set_blocksize+0x95/0x150 [ 82.954001] get_tree_bdev+0x232/0x370 [ 82.954438] ? put_ntfs+0x1d0/0x1d0 [ 82.954700] ntfs_fs_get_tree+0x15/0x20 [ 82.955049] vfs_get_tree+0x4c/0x130 [ 82.955292] path_mount+0x645/0xfd0 [ 82.955615] ? putname+0x80/0xa0 [ 82.955955] ? finish_automount+0x2e0/0x2e0 [ 82.956310] ? kmem_cache_free+0x110/0x390 [ 82.956723] ? putname+0x80/0xa0 [ 82.957023] do_mount+0xd6/0xf0 [ 82.957411] ? path_mount+0xfd0/0xfd0 [ 82.957638] ? __kasan_check_write+0x14/0x20 [ 82.957948] __x64_sys_mount+0xca/0x110 [ 82.958310] do_syscall_64+0x3b/0x90 [ 82.958719] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 82.959341] RIP: 0033:0x7fd0d1ce948a [ 82.960193] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 82.961532] RSP: 002b:00007ffe59ff69a8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 82.962527] RAX: ffffffffffffffda RBX: 0000564dcc107060 RCX: 00007fd0d1ce948a [ 82.963266] RDX: 0000564dcc107260 RSI: 0000564dcc1072e0 RDI: 0000564dcc10fce0 [ 82.963686] RBP: 0000000000000000 R08: 0000564dcc107280 R09: 0000000000000020 [ 82.964272] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564dcc10fce0 [ 82.964785] R13: 0000564dcc107260 R14: 0000000000000000 R15: 00000000ffffffff

In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case In __unregister_kprobe_top(), if the currently unregistered probe has post_handler but other child probes of the aggrprobe do not have post_handler, the post_handler of the aggrprobe is cleared. If this is a ftrace-based probe, there is a problem. In later calls to disarm_kprobe(), we will use kprobe_ftrace_ops because post_handler is NULL. But we're armed with kprobe_ipmodify_ops. This triggers a WARN in __disarm_kprobe_ftrace() and may even cause use-after-free: Failed to disarm kprobe-ftrace at kernel_clone+0x0/0x3c0 (error -2) WARNING: CPU: 5 PID: 137 at kernel/kprobes.c:1135 __disarm_kprobe_ftrace.isra.21+0xcf/0xe0 Modules linked in: testKprobe_007(-) CPU: 5 PID: 137 Comm: rmmod Not tainted 6.1.0-rc4-dirty #18 [...] Call Trace: <TASK> __disable_kprobe+0xcd/0xe0 __unregister_kprobe_top+0x12/0x150 ? mutex_lock+0xe/0x30 unregister_kprobes.part.23+0x31/0xa0 unregister_kprobe+0x32/0x40 __x64_sys_delete_module+0x15e/0x260 ? do_user_addr_fault+0x2cd/0x6b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] For the kprobe-on-ftrace case, we keep the post_handler setting to identify this aggrprobe armed with kprobe_ipmodify_ops. This way we can disarm it correctly.

A use-after-free vulnerability in the Linux kernel's net/sched: cls_u32 component can be exploited to achieve local privilege escalation. If tcf_change_indev() fails, u32_set_parms() will immediately return an error after incrementing or decrementing the reference counter in tcf_bind_filter(). If an attacker can control the reference counter and set it to zero, they can cause the reference to be freed, leading to a use-after-free vulnerability. We recommend upgrading past commit 04c55383fa5689357bcdd2c8036725a55ed632bc.

In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: axg-card: fix 'use-after-free' Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix use-after-free for dynamic ftrace_ops KASAN reported a use-after-free with ftrace ops [1]. It was found from vmcore that perf had registered two ops with the same content successively, both dynamic. After unregistering the second ops, a use-after-free occurred. In ftrace_shutdown(), when the second ops is unregistered, the FTRACE_UPDATE_CALLS command is not set because there is another enabled ops with the same content. Also, both ops are dynamic and the ftrace callback function is ftrace_ops_list_func, so the FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value of 'command' will be 0 and ftrace_shutdown() will skip the rcu synchronization. However, ftrace may be activated. When the ops is released, another CPU may be accessing the ops. Add the missing synchronization to fix this problem. [1] BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468 CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132 show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b4/0x248 lib/dump_stack.c:118 print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387 __kasan_report mm/kasan/report.c:547 [inline] kasan_report+0x118/0x210 mm/kasan/report.c:564 check_memory_region_inline mm/kasan/generic.c:187 [inline] __asan_load8+0x98/0xc0 mm/kasan/generic.c:253 __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline] ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049 ftrace_graph_call+0x0/0x4 __might_sleep+0x8/0x100 include/linux/perf_event.h:1170 __might_fault mm/memory.c:5183 [inline] __might_fault+0x58/0x70 mm/memory.c:5171 do_strncpy_from_user lib/strncpy_from_user.c:41 [inline] strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139 getname_flags+0xb0/0x31c fs/namei.c:149 getname+0x2c/0x40 fs/namei.c:209 [...] Allocated by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:479 [inline] __kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493 kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950 kmalloc include/linux/slab.h:563 [inline] kzalloc include/linux/slab.h:675 [inline] perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 __arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723 [...] Freed by task 14445: kasan_save_stack+0x24/0x50 mm/kasan/common.c:48 kasan_set_track+0x24/0x34 mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358 __kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437 __kasan_slab_free mm/kasan/common.c:445 [inline] kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446 slab_free_hook mm/slub.c:1569 [inline] slab_free_freelist_hook mm/slub.c:1608 [inline] slab_free mm/slub.c:3179 [inline] kfree+0x12c/0xc10 mm/slub.c:4176 perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434 perf_event_alloc kernel/events/core.c:11733 [inline] __do_sys_perf_event_open kernel/events/core.c:11831 [inline] __se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723 [...]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix use-after-free during gpu recovery [Why] [ 754.862560] refcount_t: underflow; use-after-free. [ 754.862898] Call Trace: [ 754.862903] <TASK> [ 754.862913] amdgpu_job_free_cb+0xc2/0xe1 [amdgpu] [ 754.863543] drm_sched_main.cold+0x34/0x39 [amd_sched] [How] The fw_fence may be not init, check whether dma_fence_init is performed before job free

A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to achieve local privilege escalation. Flaw in the error handling of bound chains causes a use-after-free in the abort path of NFT_MSG_NEWRULE. The vulnerability requires CAP_NET_ADMIN to be triggered. We recommend upgrading past commit 4bedf9eee016286c835e3d8fa981ddece5338795.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free().

In the Linux kernel, the following vulnerability has been resolved: tracing: Free buffers when a used dynamic event is removed After 65536 dynamic events have been added and removed, the "type" field of the event then uses the first type number that is available (not currently used by other events). A type number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be created and destroyed), if another dynamic event is created that has the same number that new event's logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will remove the old event and create a new one (with the same format) and increase the type number to the next available on until the type number reaches over 65535 which is the max number for the 16 bit type. After it reaches that number, the logic to allocate a new number simply looks for the next available number. When an dynamic event is removed, that number is then available to be reused by the next dynamic event created. That is, once the above reaches the max number, the number assigned to the event in that loop will remain the same. Now that means deleting one dynamic event and created another will reuse the previous events type number. This is where bad things can happen. After the above loop finishes, the kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 > kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="��������������������������������������� ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Protect mc during concurrent multicast leaves Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list.

A use-after-free vulnerability was found in the Linux kernel's netfilter subsystem in net/netfilter/nf_tables_api.c. Mishandled error handling with NFT_MSG_NEWRULE makes it possible to use a dangling pointer in the same transaction causing a use-after-free vulnerability. This flaw allows a local attacker with user access to cause a privilege escalation issue. We recommend upgrading past commit 1240eb93f0616b21c675416516ff3d74798fdc97

In the Linux kernel, the following vulnerability has been resolved: macvlan: observe an RCU grace period in macvlan_common_newlink() error path valis reported that a race condition still happens after my prior patch. macvlan_common_newlink() might have made @dev visible before detecting an error, and its caller will directly call free_netdev(dev). We must respect an RCU period, either in macvlan or the core networking stack. After adding a temporary mdelay(1000) in macvlan_forward_source_one() to open the race window, valis repro was: ip link add p1 type veth peer p2 ip link set address 00:00:00:00:00:20 dev p1 ip link set up dev p1 ip link set up dev p2 ip link add mv0 link p2 type macvlan mode source (ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4 PING 1.2.3.4 (1.2.3.4): 56 data bytes RTNETLINK answers: Invalid argument BUG: KASAN: slab-use-after-free in macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) Read of size 8 at addr ffff888016bb89c0 by task e/175 CPU: 1 UID: 1000 PID: 175 Comm: e Not tainted 6.19.0-rc8+ #33 NONE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) kasan_report (mm/kasan/report.c:597) ? macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) macvlan_forward_source (drivers/net/macvlan.c:408 drivers/net/macvlan.c:444) ? tasklet_init (kernel/softirq.c:983) macvlan_handle_frame (drivers/net/macvlan.c:501) Allocated by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) __kasan_kmalloc (mm/kasan/common.c:419) __kvmalloc_node_noprof (./include/linux/kasan.h:263 mm/slub.c:5657 mm/slub.c:7140) alloc_netdev_mqs (net/core/dev.c:12012) rtnl_create_link (net/core/rtnetlink.c:3648) rtnl_newlink (net/core/rtnetlink.c:3830 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Freed by task 169: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/x86/include/asm/current.h:25 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kfree (mm/slub.c:6674 mm/slub.c:6882) rtnl_newlink (net/core/rtnetlink.c:3845 net/core/rtnetlink.c:3957 net/core/rtnetlink.c:4072) rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sys_sendto (net/socket.c:727 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131)

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() nft_map_catchall_activate() has an inverted element activity check compared to its non-catchall counterpart nft_mapelem_activate() and compared to what is logically required. nft_map_catchall_activate() is called from the abort path to re-activate catchall map elements that were deactivated during a failed transaction. It should skip elements that are already active (they don't need re-activation) and process elements that are inactive (they need to be restored). Instead, the current code does the opposite: it skips inactive elements and processes active ones. Compare the non-catchall activate callback, which is correct: nft_mapelem_activate(): if (nft_set_elem_active(ext, iter->genmask)) return 0; /* skip active, process inactive */ With the buggy catchall version: nft_map_catchall_activate(): if (!nft_set_elem_active(ext, genmask)) continue; /* skip inactive, process active */ The consequence is that when a DELSET operation is aborted, nft_setelem_data_activate() is never called for the catchall element. For NFT_GOTO verdict elements, this means nft_data_hold() is never called to restore the chain->use reference count. Each abort cycle permanently decrements chain->use. Once chain->use reaches zero, DELCHAIN succeeds and frees the chain while catchall verdict elements still reference it, resulting in a use-after-free. This is exploitable for local privilege escalation from an unprivileged user via user namespaces + nftables on distributions that enable CONFIG_USER_NS and CONFIG_NF_TABLES. Fix by removing the negation so the check matches nft_mapelem_activate(): skip active elements, process inactive ones.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid UAF in f2fs_write_end_io() As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue.

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix use-after-free in lbs_free_adapter() The lbs_free_adapter() function uses timer_delete() (non-synchronous) for both command_timer and tx_lockup_timer before the structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If a timer callback is executing when lbs_free_adapter() is called, the callback will access freed memory since lbs_cfg_free() frees the containing structure immediately after lbs_free_adapter() returns. Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler) access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields, which would all be use-after-free violations. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. This bug was introduced in commit 8f641d93c38a ("libertas: detect TX lockups and reset hardware") where del_timer() was used instead of del_timer_sync() in the cleanup path. The command_timer has had the same issue since the driver was first written.

In the Linux kernel, the following vulnerability has been resolved: net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to ioq_vector. If request_irq() fails part-way, the rollback loop calls free_irq() with dev_id set to 'oct', which does not match the original dev_id and may leave the irqaction registered. This can keep IRQ handlers alive while ioq_vector is later freed during unwind/teardown, leading to a use-after-free or crash when an interrupt fires. Fix the error path to free IRQs with the same ioq_vector dev_id used during request_irq().

In the Linux kernel, the following vulnerability has been resolved: ALSA: aloop: Fix racy access at PCM trigger The PCM trigger callback of aloop driver tries to check the PCM state and stop the stream of the tied substream in the corresponding cable. Since both check and stop operations are performed outside the cable lock, this may result in UAF when a program attempts to trigger frequently while opening/closing the tied stream, as spotted by fuzzers. For addressing the UAF, this patch changes two things: - It covers the most of code in loopback_check_format() with cable->lock spinlock, and add the proper NULL checks. This avoids already some racy accesses. - In addition, now we try to check the state of the capture PCM stream that may be stopped in this function, which was the major pain point leading to UAF.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix use-after-free in inet6_addr_del(). syzbot reported use-after-free of inet6_ifaddr in inet6_addr_del(). [0] The cited commit accidentally moved ipv6_del_addr() for mngtmpaddr before reading its ifp->flags for temporary addresses in inet6_addr_del(). Let's move ipv6_del_addr() down to fix the UAF. [0]: BUG: KASAN: slab-use-after-free in inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 Read of size 4 at addr ffff88807b89c86c by task syz.3.1618/9593 CPU: 0 UID: 0 PID: 9593 Comm: syz.3.1618 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 inet6_addr_del.constprop.0+0x67a/0x6b0 net/ipv6/addrconf.c:3117 addrconf_del_ifaddr+0x11e/0x190 net/ipv6/addrconf.c:3181 inet6_ioctl+0x1e5/0x2b0 net/ipv6/af_inet6.c:582 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f164cf8f749 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f164de64038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f164d1e5fa0 RCX: 00007f164cf8f749 RDX: 0000200000000000 RSI: 0000000000008936 RDI: 0000000000000003 RBP: 00007f164d013f91 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f164d1e6038 R14: 00007f164d1e5fa0 R15: 00007ffde15c8288 </TASK> Allocated by task 9593: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:397 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:414 kmalloc_noprof include/linux/slab.h:957 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] ipv6_add_addr+0x4e3/0x2010 net/ipv6/addrconf.c:1120 inet6_addr_add+0x256/0x9b0 net/ipv6/addrconf.c:3050 addrconf_add_ifaddr+0x1fc/0x450 net/ipv6/addrconf.c:3160 inet6_ioctl+0x103/0x2b0 net/ipv6/af_inet6.c:580 sock_do_ioctl+0x118/0x280 net/socket.c:1254 sock_ioctl+0x227/0x6b0 net/socket.c:1375 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6099: kasan_save_stack+0x33/0x60 mm/kasan/common.c:56 kasan_save_track+0x14/0x30 mm/kasan/common.c:77 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5f/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2540 [inline] slab_free_freelist_hook mm/slub.c:2569 [inline] slab_free_bulk mm/slub.c:6696 [inline] kmem_cache_free_bulk mm/slub.c:7383 [inline] kmem_cache_free_bulk+0x2bf/0x680 mm/slub.c:7362 kfree_bulk include/linux/slab.h:830 [inline] kvfree_rcu_bulk+0x1b7/0x1e0 mm/slab_common.c:1523 kvfree_rcu_drain_ready mm/slab_common.c:1728 [inline] kfree_rcu_monitor+0x1d0/0x2f0 mm/slab_common.c:1801 process_one_work+0x9ba/0x1b20 kernel/workqueue.c:3257 process_scheduled_works kernel/workqu ---truncated---

The dccp_disconnect function in net/dccp/proto.c in the Linux kernel through 4.14.3 allows local users to gain privileges or cause a denial of service (use-after-free) via an AF_UNSPEC connect system call during the DCCP_LISTEN state.

In the Linux kernel, the following vulnerability has been resolved: netfilter: bpf: defer hook memory release until rcu readers are done Yiming Qian reports UaF when concurrent process is dumping hooks via nfnetlink_hooks: BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0 Read of size 8 at addr ffff888003edbf88 by task poc/79 Call Trace: <TASK> nfnl_hook_dump_one.isra.0+0xe71/0x10f0 netlink_dump+0x554/0x12b0 nfnl_hook_get+0x176/0x230 [..] Defer release until after concurrent readers have completed.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in durable v2 replay of active file handles parse_durable_handle_context() unconditionally assigns dh_info->fp->conn to the current connection when handling a DURABLE_REQ_V2 context with SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by fp->conn, so it returns file handles that are already actively connected. The unconditional overwrite replaces fp->conn, and when the overwriting connection is subsequently freed, __ksmbd_close_fd() dereferences the stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a use-after-free. KASAN report: [ 7.349357] ================================================================== [ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0 [ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108 [ 7.350010] [ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY [ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work [ 7.350083] Call Trace: [ 7.350087] <TASK> [ 7.350087] dump_stack_lvl+0x64/0x80 [ 7.350094] print_report+0xce/0x660 [ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 7.350101] ? __pfx___mod_timer+0x10/0x10 [ 7.350106] ? _raw_spin_lock+0x75/0xe0 [ 7.350108] kasan_report+0xce/0x100 [ 7.350109] ? _raw_spin_lock+0x75/0xe0 [ 7.350114] kasan_check_range+0x105/0x1b0 [ 7.350116] _raw_spin_lock+0x75/0xe0 [ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780 [ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0 [ 7.350128] __ksmbd_close_fd+0x27f/0xaf0 [ 7.350131] ksmbd_close_fd+0x135/0x1b0 [ 7.350133] smb2_close+0xb19/0x15b0 [ 7.350142] ? __pfx_smb2_close+0x10/0x10 [ 7.350143] ? xas_load+0x18/0x270 [ 7.350146] ? _raw_spin_lock+0x84/0xe0 [ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10 [ 7.350150] ? _raw_spin_unlock+0xe/0x30 [ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0 [ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0 [ 7.350154] handle_ksmbd_work+0x40f/0x1080 [ 7.350156] process_one_work+0x5fa/0xef0 [ 7.350162] ? assign_work+0x122/0x3e0 [ 7.350163] worker_thread+0x54b/0xf70 [ 7.350165] ? __pfx_worker_thread+0x10/0x10 [ 7.350166] kthread+0x346/0x470 [ 7.350170] ? recalc_sigpending+0x19b/0x230 [ 7.350176] ? __pfx_kthread+0x10/0x10 [ 7.350178] ret_from_fork+0x4fb/0x6c0 [ 7.350183] ? __pfx_ret_from_fork+0x10/0x10 [ 7.350185] ? __switch_to+0x36c/0xbe0 [ 7.350188] ? __pfx_kthread+0x10/0x10 [ 7.350190] ret_from_fork_asm+0x1a/0x30 [ 7.350197] </TASK> [ 7.350197] [ 7.355160] Allocated by task 123: [ 7.355261] kasan_save_stack+0x33/0x60 [ 7.355373] kasan_save_track+0x14/0x30 [ 7.355484] __kasan_kmalloc+0x8f/0xa0 [ 7.355593] ksmbd_conn_alloc+0x44/0x6d0 [ 7.355711] ksmbd_kthread_fn+0x243/0xd70 [ 7.355839] kthread+0x346/0x470 [ 7.355942] ret_from_fork+0x4fb/0x6c0 [ 7.356051] ret_from_fork_asm+0x1a/0x30 [ 7.356164] [ 7.356214] Freed by task 134: [ 7.356305] kasan_save_stack+0x33/0x60 [ 7.356416] kasan_save_track+0x14/0x30 [ 7.356527] kasan_save_free_info+0x3b/0x60 [ 7.356646] __kasan_slab_free+0x43/0x70 [ 7.356761] kfree+0x1ca/0x430 [ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0 [ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40 [ 7.357138] kthread+0x346/0x470 [ 7.357240] ret_from_fork+0x4fb/0x6c0 [ 7.357350] ret_from_fork_asm+0x1a/0x30 [ 7.357463] [ 7.357513] The buggy address belongs to the object at ffff8881056ac000 [ 7.357513] which belongs to the cache kmalloc-1k of size 1024 [ 7.357857] The buggy address is located 396 bytes inside of [ 7.357857] freed 1024-byte region ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees mixer->id_elems but the controls already added to the card still reference the freed memory. Later when snd_card_register() runs, the OSS mixer layer calls their callbacks and hits a use-after-free read. Call trace: get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411 get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241 mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381 snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887 ... snd_card_register+0x4ed/0x6d0 sound/core/init.c:923 usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025 Fix by calling snd_ctl_remove() for all mixer controls before freeing id_elems. We save the next pointer first because snd_ctl_remove() frees the current element.

In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nf_tables_addchain() nf_tables_addchain() publishes the chain to table->chains via list_add_tail_rcu() (in nft_chain_add()) before registering hooks. If nf_tables_register_hook() then fails, the error path calls nft_chain_del() (list_del_rcu()) followed by nf_tables_chain_destroy() with no RCU grace period in between. This creates two use-after-free conditions: 1) Control-plane: nf_tables_dump_chains() traverses table->chains under rcu_read_lock(). A concurrent dump can still be walking the chain when the error path frees it. 2) Packet path: for NFPROTO_INET, nf_register_net_hook() briefly installs the IPv4 hook before IPv6 registration fails. Packets entering nft_do_chain() via the transient IPv4 hook can still be dereferencing chain->blob_gen_X when the error path frees the chain. Add synchronize_rcu() between nft_chain_del() and the chain destroy so that all RCU readers -- both dump threads and in-flight packet evaluation -- have finished before the chain is freed.

In the Linux kernel, the following vulnerability has been resolved: clsact: Fix use-after-free in init/destroy rollback asymmetry Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry. The latter is achieved by first fully initializing a clsact instance, and then in a second step having a replacement failure for the new clsact qdisc instance. clsact_init() initializes ingress first and then takes care of the egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon failure, the kernel will trigger the clsact_destroy() callback. Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the way how the transition is happening. If tcf_block_get_ext on the q->ingress_block ends up failing, we took the tcx_miniq_inc reference count on the ingress side, but not yet on the egress side. clsact_destroy() tests whether the {ingress,egress}_entry was non-NULL. However, even in midway failure on the replacement, both are in fact non-NULL with a valid egress_entry from the previous clsact instance. What we really need to test for is whether the qdisc instance-specific ingress or egress side previously got initialized. This adds a small helper for checking the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon clsact_destroy() in order to fix the use-after-free scenario. Convert the ingress_destroy() side as well so both are consistent to each other.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: cancel mlo_scan_start_wk mlo_scan_start_wk is not canceled on disconnection. In fact, it is not canceled anywhere except in the restart cleanup, where we don't really have to. This can cause an init-after-queue issue: if, for example, the work was queued and then drv_change_interface got executed. This can also cause use-after-free: if the work is executed after the vif is freed.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free and list corruption on sender error The analysis from Breno: When the SMI sender returns an error, smi_work() delivers an error response but then jumps back to restart without cleaning up properly: 1. intf->curr_msg is not cleared, so no new message is pulled 2. newmsg still points to the message, causing sender() to be called again with the same message 3. If sender() fails again, deliver_err_response() is called with the same recv_msg that was already queued for delivery This causes list_add corruption ("list_add double add") because the recv_msg is added to the user_msgs list twice. Subsequently, the corrupted list leads to use-after-free when the memory is freed and reused, and eventually a NULL pointer dereference when accessing recv_msg->done. The buggy sequence: sender() fails -> deliver_err_response(recv_msg) // recv_msg queued for delivery -> goto restart // curr_msg not cleared! sender() fails again (same message!) -> deliver_err_response(recv_msg) // tries to queue same recv_msg -> LIST CORRUPTION Fix this by freeing the message and setting it to NULL on a send error. Also, always free the newmsg on a send error, otherwise it will leak.