In the Linux kernel, the following vulnerability has been resolved: init/main.c: Fix potential static_command_line memory overflow We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line. When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow. This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix DEVMAP_HASH overflow check on 32-bit arches The devmap code allocates a number hash buckets equal to the next power of two of the max_entries value provided when creating the map. When rounding up to the next power of two, the 32-bit variable storing the number of buckets can overflow, and the code checks for overflow by checking if the truncated 32-bit value is equal to 0. However, on 32-bit arches the rounding up itself can overflow mid-way through, because it ends up doing a left-shift of 32 bits on an unsigned long value. If the size of an unsigned long is four bytes, this is undefined behaviour, so there is no guarantee that we'll end up with a nice and tidy 0-value at the end. Syzbot managed to turn this into a crash on arm32 by creating a DEVMAP_HASH with max_entries > 0x80000000 and then trying to update it. Fix this by moving the overflow check to before the rounding up operation.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix double free of the ha->vp_map pointer Coverity scan reported potential risk of double free of the pointer ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed in function qla2x00_mem_free(ha). Assign NULL to vp_map and kfree take care of NULL.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potencial out-of-bounds when buffer offset is invalid I found potencial out-of-bounds when buffer offset fields of a few requests is invalid. This patch set the minimum value of buffer offset field to ->Buffer offset to validate buffer length.

In the Linux kernel, the following vulnerability has been resolved: net/rds: fix WARNING in rds_conn_connect_if_down If connection isn't established yet, get_mr() will fail, trigger connection after get_mr().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags.

An unprivileged write to the file handler flaw in the Linux kernel's control groups and namespaces subsystem was found in the way users have access to some less privileged process that are controlled by cgroups and have higher privileged parent process. It is actually both for cgroup2 and cgroup1 versions of control groups. A local user could use this flaw to crash the system or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size.

In the Linux kernel, the following vulnerability has been resolved: r8169: fix LED-related deadlock on module removal Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix OOB in nilfs_set_de_type The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT". static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode *inode) { umode_t mode = inode->i_mode; de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob } However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent kernel bug at submit_bh_wbc() Fix a bug where nilfs_get_block() returns a successful status when searching and inserting the specified block both fail inconsistently. If this inconsistent behavior is not due to a previously fixed bug, then an unexpected race is occurring, so return a temporary error -EAGAIN instead. This prevents callers such as __block_write_begin_int() from requesting a read into a buffer that is not mapped, which would cause the BUG_ON check for the BH_Mapped flag in submit_bh_wbc() to fail.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: mt7622-apmixedsys: Fix an error handling path in clk_mt8135_apmixed_probe() 'clk_data' is allocated with mtk_devm_alloc_clk_data(). So calling mtk_free_clk_data() explicitly in the remove function would lead to a double-free. Remove the redundant call.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent potential buffer overflow in map_hw_resources Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in port "disable" sysfs attribute The show and store callback routines for the "disable" sysfs attribute file in port.c acquire the device lock for the port's parent hub device. This can cause problems if another process has locked the hub to remove it or change its configuration: Removing the hub or changing its configuration requires the hub interface to be removed, which requires the port device to be removed, and device_del() waits until all outstanding sysfs attribute callbacks for the ports have returned. The lock can't be released until then. But the disable_show() or disable_store() routine can't return until after it has acquired the lock. The resulting deadlock can be avoided by calling sysfs_break_active_protection(). This will cause the sysfs core not to wait for the attribute's callback routine to return, allowing the removal to proceed. The disadvantage is that after making this call, there is no guarantee that the hub structure won't be deallocated at any moment. To prevent this, we have to acquire a reference to it first by calling hub_get().

In the Linux kernel, the following vulnerability has been resolved: USB: core: Fix deadlock in usb_deauthorize_interface() Among the attribute file callback routines in drivers/usb/core/sysfs.c, the interface_authorized_store() function is the only one which acquires a device lock on an ancestor device: It calls usb_deauthorize_interface(), which locks the interface's parent USB device. The will lead to deadlock if another process already owns that lock and tries to remove the interface, whether through a configuration change or because the device has been disconnected. As part of the removal procedure, device_del() waits for all ongoing sysfs attribute callbacks to complete. But usb_deauthorize_interface() can't complete until the device lock has been released, and the lock won't be released until the removal has finished. The mechanism provided by sysfs to prevent this kind of deadlock is to use the sysfs_break_active_protection() function, which tells sysfs not to wait for the attribute callback. Reported-and-tested by: Yue Sun <samsun1006219@gmail.com> Reported by: xingwei lee <xrivendell7@gmail.com>

In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: avoid stack overflow warnings with clang A previous patch worked around a KASAN issue in stv0367, now a similar problem showed up with clang: drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than] 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe) Rework the stv0367_writereg() function to be simpler and mark both register access functions as noinline_for_stack so the temporary i2c_msg structures do not get duplicated on the stack when KASAN_STACK is enabled.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix incorrect mpc_combine array size [why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size.

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix memory double free when handle zero packet 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Correct the PDO counting in pd_set Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one. When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected). "nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets.

In the Linux kernel, the following vulnerability has been resolved: serial: mxs-auart: add spinlock around changing cts state The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...)

In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Fix password opcode ordering for workstations The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix double-free of blocks due to wrong extents moved_len In ext4_move_extents(), moved_len is only updated when all moves are successfully executed, and only discards orig_inode and donor_inode preallocations when moved_len is not zero. When the loop fails to exit after successfully moving some extents, moved_len is not updated and remains at 0, so it does not discard the preallocations. If the moved extents overlap with the preallocated extents, the overlapped extents are freed twice in ext4_mb_release_inode_pa() and ext4_process_freed_data() (as described in commit 94d7c16cbbbd ("ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is incremented twice. Hence when trim is executed, a zero-division bug is triggered in mb_update_avg_fragment_size() because bb_free is not zero and bb_fragments is zero. Therefore, update move_len after each extent move to avoid the issue.

In the Linux kernel, the following vulnerability has been resolved: nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() When nvme_identify_ns() fails, it frees the pointer to the struct nvme_id_ns before it returns. However, ns_update_nuse() calls kfree() for the pointer even when nvme_identify_ns() fails. This results in KASAN double-free, which was observed with blktests nvme/045 with proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by skipping kfree() when nvme_identify_ns() fails.

In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() Apply the same fix than ones found in : 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. syzbot reported: BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389 ipgre_rcv net/ipv4/ip_gre.c:411 [inline] gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447 gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 netif_receive_skb_internal net/core/dev.c:5734 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5793 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556 tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133 alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204 skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909 tun_build_skb drivers/net/tun.c:1686 [inline] tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: afs: Increase buffer size in afs_update_volume_status() The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential out-of-bounds access in 'amdgpu_discovery_reg_base_init()' The issue arises when the array 'adev->vcn.vcn_config' is accessed before checking if the index 'adev->vcn.num_vcn_inst' is within the bounds of the array. The fix involves moving the bounds check before the array access. This ensures that 'adev->vcn.num_vcn_inst' is within the bounds of the array before it is used as an index. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c:1289 amdgpu_discovery_reg_base_init() error: testing array offset 'adev->vcn.num_vcn_inst' after use.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free of anonymous device after snapshot creation failure When creating a snapshot we may do a double free of an anonymous device in case there's an error committing the transaction. The second free may result in freeing an anonymous device number that was allocated by some other subsystem in the kernel or another btrfs filesystem. The steps that lead to this: 1) At ioctl.c:create_snapshot() we allocate an anonymous device number and assign it to pending_snapshot->anon_dev; 2) Then we call btrfs_commit_transaction() and end up at transaction.c:create_pending_snapshot(); 3) There we call btrfs_get_new_fs_root() and pass it the anonymous device number stored in pending_snapshot->anon_dev; 4) btrfs_get_new_fs_root() frees that anonymous device number because btrfs_lookup_fs_root() returned a root - someone else did a lookup of the new root already, which could some task doing backref walking; 5) After that some error happens in the transaction commit path, and at ioctl.c:create_snapshot() we jump to the 'fail' label, and after that we free again the same anonymous device number, which in the meanwhile may have been reallocated somewhere else, because pending_snapshot->anon_dev still has the same value as in step 1. Recently syzbot ran into this and reported the following trace: ------------[ cut here ]------------ ida_free called for id=51 which is not allocated. WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525 Modules linked in: CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc9076 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525 Code: 10 42 80 3c 28 (...) RSP: 0018:ffffc90015a67300 EFLAGS: 00010246 RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000 RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000 RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4 R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246 R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246 FS: 00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0 Call Trace: <TASK> btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346 create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837 create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931 btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404 create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848 btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998 btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044 __btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306 btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393 btrfs_ioctl+0xa74/0xd40 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7fca3e67dda9 Code: 28 00 00 00 (...) RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9 RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658 </TASK> Where we get an explicit message where we attempt to free an anonymous device number that is not currently allocated. It happens in a different code path from the example below, at btrfs_get_root_ref(), so this change may not fix the case triggered by sy ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix hashtab overflow check on 32-bit arches The hashtab code relies on roundup_pow_of_two() to compute the number of hash buckets, and contains an overflow check by checking if the resulting value is 0. However, on 32-bit arches, the roundup code itself can overflow by doing a 32-bit left-shift of an unsigned long value, which is undefined behaviour, so it is not guaranteed to truncate neatly. This was triggered by syzbot on the DEVMAP_HASH type, which contains the same check, copied from the hashtab code. So apply the same fix to hashtab, by moving the overflow check to before the roundup.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix a memory corruption iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in bytes, we'll write past the buffer.

In the Linux kernel, the following vulnerability has been resolved: pwm: Fix out-of-bounds access in of_pwm_single_xlate() With args->args_count == 2 args->args[2] is not defined. Actually the flags are contained in args->args[1].

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix global oob in ksmbd_nl_policy Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active.

loop_rw_iter in fs/io_uring.c in the Linux kernel 5.10 through 5.14.6 allows local users to gain privileges by using IORING_OP_PROVIDE_BUFFERS to trigger a free of a kernel buffer, as demonstrated by using /proc/<pid>/maps for exploitation.

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default.

A vulnerability was found in the fs/inode.c:inode_init_owner() function logic of the LInux kernel that allows local users to create files for the XFS file-system with an unintended group ownership and with group execution and SGID permission bits set, in a scenario where a directory is SGID and belongs to a certain group and is writable by a user who is not a member of this group. This can lead to excessive permissions granted in case when they should not. This vulnerability is similar to the previous CVE-2018-13405 and adds the missed fix for the XFS.

An issue was discovered in ksmbd in the Linux kernel before 6.6.10. smb2_get_data_area_len in fs/smb/server/smb2misc.c can cause an smb_strndup_from_utf16 out-of-bounds access because the relationship between Name data and CreateContexts data is mishandled.

Integer Overflow or Wraparound vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (md, raid, raid5 modules) allows Forced Integer Overflow.

The inode_init_owner function in fs/inode.c in the Linux kernel through 3.16 allows local users to create files with an unintended group ownership, in a scenario where a directory is SGID to a certain group and is writable by a user who is not a member of that group. Here, the non-member can trigger creation of a plain file whose group ownership is that group. The intended behavior was that the non-member can trigger creation of a directory (but not a plain file) whose group ownership is that group. The non-member can escalate privileges by making the plain file executable and SGID.

An unauthorized access to the execution of the setuid file with capabilities flaw in the Linux kernel OverlayFS subsystem was found in the way user copying a capable file from a nosuid mount into another mount. A local user could use this flaw to escalate their privileges on the system.

IBM QRadar SIEM 7.3, 7.4, and 7.5 is vulnerable to local privilege escalation if this could be combined with other unknown vulnerabilities then privilege escalation could be performed. IBM X-Force ID: 216111.

On Linux, Node.js ignores certain environment variables if those may have been set by an unprivileged user while the process is running with elevated privileges with the only exception of CAP_NET_BIND_SERVICE. Due to a bug in the implementation of this exception, Node.js incorrectly applies this exception even when certain other capabilities have been set. This allows unprivileged users to inject code that inherits the process's elevated privileges.

arch/mips/net/bpf_jit.c in the Linux kernel before 5.4.10 can generate undesirable machine code when transforming unprivileged cBPF programs, allowing execution of arbitrary code within the kernel context. This occurs because conditional branches can exceed the 128 KB limit of the MIPS architecture.

In kernel/bpf/hashtab.c in the Linux kernel through 5.13.8, there is an integer overflow and out-of-bounds write when many elements are placed in a single bucket. NOTE: exploitation might be impractical without the CAP_SYS_ADMIN capability.

Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). Supported versions that are affected are Prior to 7.0.16. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. Note: This vulnerability applies to Linux hosts only. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).

In the Linux kernel, the following vulnerability has been resolved: crypto: s390/aes - Fix buffer overread in CTR mode When processing the last block, the s390 ctr code will always read a whole block, even if there isn't a whole block of data left. Fix this by using the actual length left and copy it into a buffer first for processing.

In drivers/char/virtio_console.c in the Linux kernel before 5.13.4, data corruption or loss can be triggered by an untrusted device that supplies a buf->len value exceeding the buffer size. NOTE: the vendor indicates that the cited data corruption is not a vulnerability in any existing use case; the length validation was added solely for robustness in the face of anomalous host OS behavior

In the Linux kernel, the following vulnerability has been resolved: perf/core: Exit early on perf_mmap() fail When perf_mmap() fails to allocate a buffer, it still invokes the event_mapped() callback of the related event. On X86 this might increase the perf_rdpmc_allowed reference counter. But nothing undoes this as perf_mmap_close() is never called in this case, which causes another reference count leak. Return early on failure to prevent that.

Improper Verification of Cryptographic Signature vulnerability in Snow Software Inventory Agent on MacOS, Snow Software Inventory Agent on Windows, Snow Software Inventory Agent on Linux allows File Manipulation through Snow Update Packages.This issue affects Inventory Agent: through 6.12.0; Inventory Agent: through 6.14.5; Inventory Agent: through 6.7.2.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix filehandle bounds checking in nfs_fh_to_dentry() The function needs to check the minimal filehandle length before it can access the embedded filehandle.