In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in a buffer overflow (although it's unrealistic). This patch replaces it with a safer version, scnprintf() for papering over such a potential issue.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix memory corruption in VF driver Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237

In the Linux kernel, the following vulnerability has been resolved: power: supply: core: Fix boundary conditions in interpolation The functions power_supply_temp2resist_simple and power_supply_ocv2cap_simple handle boundary conditions incorrectly. The change was introduced in a4585ba2050f460f749bbaf2b67bd56c41e30283 ("power: supply: core: Use library interpolation"). There are two issues: First, the lines "high = i - 1" and "high = i" in ocv2cap have the wrong order compared to temp2resist. As a consequence, ocv2cap sets high=-1 if ocv>table[0].ocv, which causes an out-of-bounds read. Second, the logic of temp2resist is also not correct. Consider the case table[] = {{20, 100}, {10, 80}, {0, 60}}. For temp=5, we expect a resistance of 70% by interpolation. However, temp2resist sets high=low=2 and returns 60.

In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: fix completion handling The driver currently assumes that the notify callback is only received when the device is done with all the queued buffers. However, this is not true, since the notify callback could be called without any of the queued buffers being completed (for example, with virtio-pci and shared interrupts) or with only some of the buffers being completed (since the driver makes them available to the device in multiple separate virtqueue_add_sgs() calls). This can lead to incorrect data on the I2C bus or memory corruption in the guest if the device operates on buffers which are have been freed by the driver. (The WARN_ON in the driver is also triggered.) BUG kmalloc-128 (Tainted: G W ): Poison overwritten First byte 0x0 instead of 0x6b Allocated in i2cdev_ioctl_rdwr+0x9d/0x1de age=243 cpu=0 pid=28 memdup_user+0x2e/0xbd i2cdev_ioctl_rdwr+0x9d/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in i2cdev_ioctl_rdwr+0x1bb/0x1de age=68 cpu=0 pid=28 kfree+0x1bd/0x1cc i2cdev_ioctl_rdwr+0x1bb/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Fix this by calling virtio_get_buf() from the notify handler like other virtio drivers and by actually waiting for all the buffers to be completed.

In the Linux kernel through 6.2.7, fs/ntfs3/inode.c has an invalid kfree because it does not validate MFT flags before replaying logs.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Really move i915_gem_context.link under ref protection i915_perf assumes that it can use the i915_gem_context reference to protect its i915->gem.contexts.list iteration. However, this requires that we do not remove the context from the list until after we drop the final reference and release the struct. If, as currently, we remove the context from the list during context_close(), the link.next pointer may be poisoned while we are holding the context reference and cause a GPF: [ 4070.573157] i915 0000:00:02.0: [drm:i915_perf_open_ioctl [i915]] filtering on ctx_id=0x1fffff ctx_id_mask=0x1fffff [ 4070.574881] general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP [ 4070.574897] CPU: 1 PID: 284392 Comm: amd_performance Tainted: G E 5.17.9 #180 [ 4070.574903] Hardware name: Intel Corporation NUC7i5BNK/NUC7i5BNB, BIOS BNKBL357.86A.0052.2017.0918.1346 09/18/2017 [ 4070.574907] RIP: 0010:oa_configure_all_contexts.isra.0+0x222/0x350 [i915] [ 4070.574982] Code: 08 e8 32 6e 10 e1 4d 8b 6d 50 b8 ff ff ff ff 49 83 ed 50 f0 41 0f c1 04 24 83 f8 01 0f 84 e3 00 00 00 85 c0 0f 8e fa 00 00 00 <49> 8b 45 50 48 8d 70 b0 49 8d 45 50 48 39 44 24 10 0f 85 34 fe ff [ 4070.574990] RSP: 0018:ffffc90002077b78 EFLAGS: 00010202 [ 4070.574995] RAX: 0000000000000002 RBX: 0000000000000002 RCX: 0000000000000000 [ 4070.575000] RDX: 0000000000000001 RSI: ffffc90002077b20 RDI: ffff88810ddc7c68 [ 4070.575004] RBP: 0000000000000001 R08: ffff888103242648 R09: fffffffffffffffc [ 4070.575008] R10: ffffffff82c50bc0 R11: 0000000000025c80 R12: ffff888101bf1860 [ 4070.575012] R13: dead0000000000b0 R14: ffffc90002077c04 R15: ffff88810be5cabc [ 4070.575016] FS: 00007f1ed50c0780(0000) GS:ffff88885ec80000(0000) knlGS:0000000000000000 [ 4070.575021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4070.575025] CR2: 00007f1ed5590280 CR3: 000000010ef6f005 CR4: 00000000003706e0 [ 4070.575029] Call Trace: [ 4070.575033] <TASK> [ 4070.575037] lrc_configure_all_contexts+0x13e/0x150 [i915] [ 4070.575103] gen8_enable_metric_set+0x4d/0x90 [i915] [ 4070.575164] i915_perf_open_ioctl+0xbc0/0x1500 [i915] [ 4070.575224] ? asm_common_interrupt+0x1e/0x40 [ 4070.575232] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575290] drm_ioctl_kernel+0x85/0x110 [ 4070.575296] ? update_load_avg+0x5f/0x5e0 [ 4070.575302] drm_ioctl+0x1d3/0x370 [ 4070.575307] ? i915_oa_init_reg_state+0x110/0x110 [i915] [ 4070.575382] ? gen8_gt_irq_handler+0x46/0x130 [i915] [ 4070.575445] __x64_sys_ioctl+0x3c4/0x8d0 [ 4070.575451] ? __do_softirq+0xaa/0x1d2 [ 4070.575456] do_syscall_64+0x35/0x80 [ 4070.575461] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 4070.575467] RIP: 0033:0x7f1ed5c10397 [ 4070.575471] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [ 4070.575478] RSP: 002b:00007ffd65c8d7a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 4070.575484] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f1ed5c10397 [ 4070.575488] RDX: 00007ffd65c8d7c0 RSI: 0000000040106476 RDI: 0000000000000006 [ 4070.575492] RBP: 00005620972f9c60 R08: 000000000000000a R09: 0000000000000005 [ 4070.575496] R10: 000000000000000d R11: 0000000000000246 R12: 000000000000000a [ 4070.575500] R13: 000000000000000d R14: 0000000000000000 R15: 00007ffd65c8d7c0 [ 4070.575505] </TASK> [ 4070.575507] Modules linked in: nls_ascii(E) nls_cp437(E) vfat(E) fat(E) i915(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) aesni_intel(E) crypto_simd(E) intel_gtt(E) cryptd(E) ttm(E) rapl(E) intel_cstate(E) drm_kms_helper(E) cfbfillrect(E) syscopyarea(E) cfbimgblt(E) intel_uncore(E) sysfillrect(E) mei_me(E) sysimgblt(E) i2c_i801(E) fb_sys_fops(E) mei(E) intel_pch_thermal(E) i2c_smbus ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: gpmi: don't leak PM reference in error path If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped.

A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix error handling in ext4_fc_record_modified_inode() Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that. Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file.

In the Linux kernel, the following vulnerability has been resolved: mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context. Commit 5a836bf6b09f ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context") moved all flush_cpu_slab() invocations to the global workqueue to avoid a problem related with deactivate_slab()/__free_slab() being called from an IRQ context on PREEMPT_RT kernels. When the flush_all_cpu_locked() function is called from a task context it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up flushing the global workqueue, this will cause a dependency issue. workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core] is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637 check_flush_dependency+0x10a/0x120 Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core] RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace: __flush_work.isra.0+0xbf/0x220 ? __queue_work+0x1dc/0x420 flush_all_cpus_locked+0xfb/0x120 __kmem_cache_shutdown+0x2b/0x320 kmem_cache_destroy+0x49/0x100 bioset_exit+0x143/0x190 blk_release_queue+0xb9/0x100 kobject_cleanup+0x37/0x130 nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc] nvme_free_ctrl+0x1ac/0x2b0 [nvme_core] Fix this bug by creating a workqueue for the flush operation with the WQ_MEM_RECLAIM bit set.

A random memory access flaw was found in the Linux kernel's GPU i915 kernel driver functionality in the way a user may run malicious code on the GPU. This flaw allows a local user to crash the system or escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Fix string overflow in SCPI genpd driver Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30. Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Prevent buffer overflow in setup handler Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes.

In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: Fix crash due to OOB write the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." BugLink: https://github.com/openwrt/openwrt/issues/9505

In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf/32: Fix Oops on tail call tests test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee7b690 ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Avoid field-overflowing memcpy() In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations).

In the Linux kernel, the following vulnerability has been resolved: igbvf: fix double free in `igbvf_probe` In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix even more out of bound writes from debugfs CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland)

In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix flipped sign in tls_err_abort() calls sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once.

In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix bulk-buffer overflow The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix off by one in BIOS boundary checking Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message]

In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment]

In the Linux kernel, the following vulnerability has been resolved: ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx() The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix wild memory access when clearing fragments while testing re-assembly/re-fragmentation using act_ct, it's possible to observe a crash like the following one: KASAN: maybe wild-memory-access in range [0x0001000000000448-0x000100000000044f] CPU: 50 PID: 0 Comm: swapper/50 Tainted: G S 5.12.0-rc7+ #424 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:inet_frag_rbtree_purge+0x50/0xc0 Code: 00 fc ff df 48 89 c3 31 ed 48 89 df e8 a9 7a 38 ff 4c 89 fe 48 89 df 49 89 c6 e8 5b 3a 38 ff 48 8d 7b 40 48 89 f8 48 c1 e8 03 <42> 80 3c 20 00 75 59 48 8d bb d0 00 00 00 4c 8b 6b 40 48 89 f8 48 RSP: 0018:ffff888c31449db8 EFLAGS: 00010203 RAX: 0000200000000089 RBX: 000100000000040e RCX: ffffffff989eb960 RDX: 0000000000000140 RSI: ffffffff97cfb977 RDI: 000100000000044e RBP: 0000000000000900 R08: 0000000000000000 R09: ffffed1186289350 R10: 0000000000000003 R11: ffffed1186289350 R12: dffffc0000000000 R13: 000100000000040e R14: 0000000000000000 R15: ffff888155e02160 FS: 0000000000000000(0000) GS:ffff888c31440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005600cb70a5b8 CR3: 0000000a2c014005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_frag_destroy+0xa9/0x150 call_timer_fn+0x2d/0x180 run_timer_softirq+0x4fe/0xe70 __do_softirq+0x197/0x5a0 irq_exit_rcu+0x1de/0x200 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> when act_ct temporarily stores an IP fragment, restoring the skb qdisc cb results in putting random data in FRAG_CB(), and this causes those "wild" memory accesses later, when the rbtree is purged. Never overwrite the skb cb in case tcf_ct_handle_fragments() returns -EINPROGRESS.

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: Skip non-Ethernet packets Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets.

In the Linux kernel, the following vulnerability has been resolved: tun: avoid double free in tun_free_netdev Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") addressed a number of underflow situations when writing temperature limits. However, it missed one situation, seen when an attempt is made to set the hysteresis value to MAX_LONG and the critical temperature limit is negative. Use clamp_val() when setting the hysteresis temperature to ensure that the provided value can never overflow or underflow.

In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix incorrect page free bug Pointer to the allocated pages (struct page *page) has already progressed towards the end of allocation. It is incorrect to perform __free_pages(page, order) using this pointer as we would free any arbitrary pages. Fix this by stop modifying the page pointer.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on curseg->alloc_type As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215657 - Overview UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image - Reproduce tested on kernel 5.17-rc4, 5.17-rc6 1. mkdir test_crash 2. cd test_crash 3. unzip tmp2.zip 4. mkdir mnt 5. ./single_test.sh f2fs 2 - Kernel dump [ 46.434454] loop0: detected capacity change from 0 to 131072 [ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9 [ 46.738319] ================================================================================ [ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 [ 46.738475] index 231 is out of range for type 'unsigned int [2]' [ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1 [ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 46.738551] Call Trace: [ 46.738556] <TASK> [ 46.738563] dump_stack_lvl+0x47/0x5c [ 46.738581] ubsan_epilogue+0x5/0x50 [ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80 [ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs] [ 46.738819] do_write_page+0xef/0x210 [f2fs] [ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs] [ 46.739038] __write_node_page+0x2b7/0x920 [f2fs] [ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs] [ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs] [ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs] [ 46.739507] deactivate_locked_super+0x60/0xc0 [ 46.739517] deactivate_super+0x70/0xb0 [ 46.739524] cleanup_mnt+0x11a/0x200 [ 46.739532] __cleanup_mnt+0x16/0x20 [ 46.739538] task_work_run+0x67/0xa0 [ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0 [ 46.739559] syscall_exit_to_user_mode+0x26/0x40 [ 46.739568] do_syscall_64+0x46/0xb0 [ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is we missed to do sanity check on curseg->alloc_type, result in out-of-bound accessing on sbi->block_count[] array, fix it.

In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.

In the Linux kernel, the following vulnerability has been resolved: cifs: fix double free race when mount fails in cifs_get_root() When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: cfg80211: call cfg80211_stop_ap when switch from P2P_GO type If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix txrate reporting Properly check rate_info to fix unexpected reporting. [ 1215.161863] Call trace: [ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211] [ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211] [ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211] [ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e] [ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e] [ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e] [ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76] [ 1215.201276] __napi_poll+0x38/0xf8 [ 1215.204668] napi_workfn+0x40/0x80 [ 1215.208062] process_one_work+0x1fc/0x390 [ 1215.212062] worker_thread+0x48/0x4d0 [ 1215.215715] kthread+0x120/0x128 [ 1215.218935] ret_from_fork+0x10/0x1c

In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Always make an attempt to map eVMCS after migration When enlightened VMCS is in use and nested state is migrated with vmx_get_nested_state()/vmx_set_nested_state() KVM can't map evmcs page right away: evmcs gpa is not 'struct kvm_vmx_nested_state_hdr' and we can't read it from VP assist page because userspace may decide to restore HV_X64_MSR_VP_ASSIST_PAGE after restoring nested state (and QEMU, for example, does exactly that). To make sure eVMCS is mapped /vmx_set_nested_state() raises KVM_REQ_GET_NESTED_STATE_PAGES request. Commit f2c7ef3ba955 ("KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES on nested vmexit") added KVM_REQ_GET_NESTED_STATE_PAGES clearing to nested_vmx_vmexit() to make sure MSR permission bitmap is not switched when an immediate exit from L2 to L1 happens right after migration (caused by a pending event, for example). Unfortunately, in the exact same situation we still need to have eVMCS mapped so nested_sync_vmcs12_to_shadow() reflects changes in VMCS12 to eVMCS. As a band-aid, restore nested_get_evmcs_page() when clearing KVM_REQ_GET_NESTED_STATE_PAGES in nested_vmx_vmexit(). The 'fix' is far from being ideal as we can't easily propagate possible failures and even if we could, this is most likely already too late to do so. The whole 'KVM_REQ_GET_NESTED_STATE_PAGES' idea for mapping eVMCS after migration seems to be fragile as we diverge too much from the 'native' path when vmptr loading happens on vmx_set_nested_state().

In the Linux kernel, the following vulnerability has been resolved: libbpf: Handle size overflow for ringbuf mmap The maximum size of ringbuf is 2GB on x86-64 host, so 2 * max_entries will overflow u32 when mapping producer page and data pages. Only casting max_entries to size_t is not enough, because for 32-bits application on 64-bits kernel the size of read-only mmap region also could overflow size_t. So fixing it by casting the size of read-only mmap region into a __u64 and checking whether or not there will be overflow during mmap.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report Fix possible array out of bound access in mt7921_mcu_tx_rate_report. Remove unnecessary varibable in mt7921_mcu_tx_rate_report

An issue was discovered in the Linux kernel before 6.0.11. Missing validation of the number of channels in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger a heap-based buffer overflow when copying the list of operating channels from Wi-Fi management frames.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context() This function is called from ethtool_set_rxfh() and "*rss_context" comes from the user. Add some bounds checking to prevent memory corruption.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix overflows checks in provide buffers Colin reported before possible overflow and sign extension problems in io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension"). Do that with help of check_<op>_overflow helpers. And fix struct io_provide_buf::len type, as it doesn't make much sense to keep it signed.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix off by one in hdmi_14_process_transaction() The hdcp_i2c_offsets[] array did not have an entry for HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one read overflow. I added an entry and copied the 0x0 value for the offset from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c. I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX entries. This doesn't change the code, but it's just a belt and suspenders approach to try future proof the code.

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Validate channel ID when processing command completions MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element.

In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.

The blkcg_init_queue function in block/blk-cgroup.c in the Linux kernel before 4.11 allows local users to cause a denial of service (double free) or possibly have unspecified other impact by triggering a creation failure.

An issue was discovered in the Linux kernel before 6.0.11. Missing validation of IEEE80211_P2P_ATTR_OPER_CHANNEL in drivers/net/wireless/microchip/wilc1000/cfg80211.c in the WILC1000 wireless driver can trigger an out-of-bounds write when parsing the channel list attribute from Wi-Fi management frames.