In the Linux kernel, the following vulnerability has been resolved: nvme: fix SRCU protection of nvme_ns_head list Walking the nvme_ns_head siblings list is protected by the head's srcu in nvme_ns_head_submit_bio() but not nvme_mpath_revalidate_paths(). Removing namespaces from the list also fails to synchronize the srcu. Concurrent scan work can therefore cause use-after-frees. Hold the head's srcu lock in nvme_mpath_revalidate_paths() and synchronize with the srcu, not the global RCU, in nvme_ns_remove(). Observed the following panic when making NVMe/RDMA connections with native multipath on the Rocky Linux 8.6 kernel (it seems the upstream kernel has the same race condition). Disassembly shows the faulting instruction is cmp 0x50(%rdx),%rcx; computing capacity != get_capacity(ns->disk). Address 0x50 is dereferenced because ns->disk is NULL. The NULL disk appears to be the result of concurrent scan work freeing the namespace (note the log line in the middle of the panic). [37314.206036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [37314.206036] nvme0n3: detected capacity change from 0 to 11811160064 [37314.299753] PGD 0 P4D 0 [37314.299756] Oops: 0000 [#1] SMP PTI [37314.299759] CPU: 29 PID: 322046 Comm: kworker/u98:3 Kdump: loaded Tainted: G W X --------- - - 4.18.0-372.32.1.el8test86.x86_64 #1 [37314.299762] Hardware name: Dell Inc. PowerEdge R720/0JP31P, BIOS 2.7.0 05/23/2018 [37314.299763] Workqueue: nvme-wq nvme_scan_work [nvme_core] [37314.299783] RIP: 0010:nvme_mpath_revalidate_paths+0x26/0xb0 [nvme_core] [37314.299790] Code: 1f 44 00 00 66 66 66 66 90 55 53 48 8b 5f 50 48 8b 83 c8 c9 00 00 48 8b 13 48 8b 48 50 48 39 d3 74 20 48 8d 42 d0 48 8b 50 20 <48> 3b 4a 50 74 05 f0 80 60 70 ef 48 8b 50 30 48 8d 42 d0 48 39 d3 [37315.058803] RSP: 0018:ffffabe28f913d10 EFLAGS: 00010202 [37315.121316] RAX: ffff927a077da800 RBX: ffff92991dd70000 RCX: 0000000001600000 [37315.206704] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff92991b719800 [37315.292106] RBP: ffff929a6b70c000 R08: 000000010234cd4a R09: c0000000ffff7fff [37315.377501] R10: 0000000000000001 R11: ffffabe28f913a30 R12: 0000000000000000 [37315.462889] R13: ffff92992716600c R14: ffff929964e6e030 R15: ffff92991dd70000 [37315.548286] FS: 0000000000000000(0000) GS:ffff92b87fb80000(0000) knlGS:0000000000000000 [37315.645111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [37315.713871] CR2: 0000000000000050 CR3: 0000002208810006 CR4: 00000000000606e0 [37315.799267] Call Trace: [37315.828515] nvme_update_ns_info+0x1ac/0x250 [nvme_core] [37315.892075] nvme_validate_or_alloc_ns+0x2ff/0xa00 [nvme_core] [37315.961871] ? __blk_mq_free_request+0x6b/0x90 [37316.015021] nvme_scan_work+0x151/0x240 [nvme_core] [37316.073371] process_one_work+0x1a7/0x360 [37316.121318] ? create_worker+0x1a0/0x1a0 [37316.168227] worker_thread+0x30/0x390 [37316.212024] ? create_worker+0x1a0/0x1a0 [37316.258939] kthread+0x10a/0x120 [37316.297557] ? set_kthread_struct+0x50/0x50 [37316.347590] ret_from_fork+0x35/0x40 [37316.390360] Modules linked in: nvme_rdma nvme_tcp(X) nvme_fabrics nvme_core netconsole iscsi_tcp libiscsi_tcp dm_queue_length dm_service_time nf_conntrack_netlink br_netfilter bridge stp llc overlay nft_chain_nat ipt_MASQUERADE nf_nat xt_addrtype xt_CT nft_counter xt_state xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment xt_multiport nft_compat nf_tables libcrc32c nfnetlink dm_multipath tg3 rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm intel_rapl_msr iTCO_wdt iTCO_vendor_support dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel ib_uverbs rapl intel_cstate intel_uncore ib_core ipmi_si joydev mei_me pcspkr ipmi_devintf mei lpc_ich wmi ipmi_msghandler acpi_power_meter ex ---truncated---

In the Linux kernel, the following vulnerability has been resolved: rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev struct rpmsg_ctrldev contains a struct cdev. The current code frees the rpmsg_ctrldev struct in rpmsg_ctrldev_release_device(), but the cdev is a managed object, therefore its release is not predictable and the rpmsg_ctrldev could be freed before the cdev is entirely released, as in the backtrace below. [ 93.625603] ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x7c [ 93.636115] WARNING: CPU: 0 PID: 12 at lib/debugobjects.c:488 debug_print_object+0x13c/0x1b0 [ 93.644799] Modules linked in: veth xt_cgroup xt_MASQUERADE rfcomm algif_hash algif_skcipher af_alg uinput ip6table_nat fuse uvcvideo videobuf2_vmalloc venus_enc venus_dec videobuf2_dma_contig hci_uart btandroid btqca snd_soc_rt5682_i2c bluetooth qcom_spmi_temp_alarm snd_soc_rt5682v [ 93.715175] CPU: 0 PID: 12 Comm: kworker/0:1 Tainted: G B 5.4.163-lockdep #26 [ 93.723855] Hardware name: Google Lazor (rev3 - 8) with LTE (DT) [ 93.730055] Workqueue: events kobject_delayed_cleanup [ 93.735271] pstate: 60c00009 (nZCv daif +PAN +UAO) [ 93.740216] pc : debug_print_object+0x13c/0x1b0 [ 93.744890] lr : debug_print_object+0x13c/0x1b0 [ 93.749555] sp : ffffffacf5bc7940 [ 93.752978] x29: ffffffacf5bc7940 x28: dfffffd000000000 [ 93.758448] x27: ffffffacdb11a800 x26: dfffffd000000000 [ 93.763916] x25: ffffffd0734f856c x24: dfffffd000000000 [ 93.769389] x23: 0000000000000000 x22: ffffffd0733c35b0 [ 93.774860] x21: ffffffd0751994a0 x20: ffffffd075ec27c0 [ 93.780338] x19: ffffffd075199100 x18: 00000000000276e0 [ 93.785814] x17: 0000000000000000 x16: dfffffd000000000 [ 93.791291] x15: ffffffffffffffff x14: 6e6968207473696c [ 93.796768] x13: 0000000000000000 x12: ffffffd075e2b000 [ 93.802244] x11: 0000000000000001 x10: 0000000000000000 [ 93.807723] x9 : d13400dff1921900 x8 : d13400dff1921900 [ 93.813200] x7 : 0000000000000000 x6 : 0000000000000000 [ 93.818676] x5 : 0000000000000080 x4 : 0000000000000000 [ 93.824152] x3 : ffffffd0732a0fa4 x2 : 0000000000000001 [ 93.829628] x1 : ffffffacf5bc7580 x0 : 0000000000000061 [ 93.835104] Call trace: [ 93.837644] debug_print_object+0x13c/0x1b0 [ 93.841963] __debug_check_no_obj_freed+0x25c/0x3c0 [ 93.846987] debug_check_no_obj_freed+0x18/0x20 [ 93.851669] slab_free_freelist_hook+0xbc/0x1e4 [ 93.856346] kfree+0xfc/0x2f4 [ 93.859416] rpmsg_ctrldev_release_device+0x78/0xb8 [ 93.864445] device_release+0x84/0x168 [ 93.868310] kobject_cleanup+0x12c/0x298 [ 93.872356] kobject_delayed_cleanup+0x10/0x18 [ 93.876948] process_one_work+0x578/0x92c [ 93.881086] worker_thread+0x804/0xcf8 [ 93.884963] kthread+0x2a8/0x314 [ 93.888303] ret_from_fork+0x10/0x18 The cdev_device_add/del() API was created to address this issue (see commit '233ed09d7fda ("chardev: add helper function to register char devs with a struct device")'), use it instead of cdev add/del().

In the Linux kernel, the following vulnerability has been resolved: vdpa: fix use-after-free on vp_vdpa_remove When vp_vdpa driver is unbind, vp_vdpa is freed in vdpa_unregister_device and then vp_vdpa->mdev.pci_dev is dereferenced in vp_modern_remove, triggering use-after-free. Call Trace of unbinding driver free vp_vdpa : do_syscall_64 vfs_write kernfs_fop_write_iter device_release_driver_internal pci_device_remove vp_vdpa_remove vdpa_unregister_device kobject_release device_release kfree Call Trace of dereference vp_vdpa->mdev.pci_dev: vp_modern_remove pci_release_selected_regions pci_release_region pci_resource_len pci_resource_end (dev)->resource[(bar)].end

A use-after-free exists in Python through 3.9 via heappushpop in heapq.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix leaking sent_cmd skb sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix a race on command flush flow Fix a refcount use after free warning due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process released its refcount but didn't release the index yet. Fix it by adding the needed spin lock. It fixes the following warning trace: refcount_t: addition on 0; use-after-free. WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0 ... RIP: 0010:refcount_warn_saturate+0x80/0xe0 ... Call Trace: <TASK> mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core] mlx5_cmd_flush+0x3a/0xf0 [mlx5_core] enter_error_state+0x44/0x80 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core] process_one_work+0x1be/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x141/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix a use-after-free There are two .exit_cmd_priv implementations. Both implementations use resources associated with the SCSI host. Make sure that these resources are still available when .exit_cmd_priv is called by waiting inside scsi_remove_host() until the tag set has been freed. This commit fixes the following use-after-free: ================================================================== BUG: KASAN: use-after-free in srp_exit_cmd_priv+0x27/0xd0 [ib_srp] Read of size 8 at addr ffff888100337000 by task multipathd/16727 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x5e/0x5db kasan_report+0xab/0x120 srp_exit_cmd_priv+0x27/0xd0 [ib_srp] scsi_mq_exit_request+0x4d/0x70 blk_mq_free_rqs+0x143/0x410 __blk_mq_free_map_and_rqs+0x6e/0x100 blk_mq_free_tag_set+0x2b/0x160 scsi_host_dev_release+0xf3/0x1a0 device_release+0x54/0xe0 kobject_put+0xa5/0x120 device_release+0x54/0xe0 kobject_put+0xa5/0x120 scsi_device_dev_release_usercontext+0x4c1/0x4e0 execute_in_process_context+0x23/0x90 device_release+0x54/0xe0 kobject_put+0xa5/0x120 scsi_disk_release+0x3f/0x50 device_release+0x54/0xe0 kobject_put+0xa5/0x120 disk_release+0x17f/0x1b0 device_release+0x54/0xe0 kobject_put+0xa5/0x120 dm_put_table_device+0xa3/0x160 [dm_mod] dm_put_device+0xd0/0x140 [dm_mod] free_priority_group+0xd8/0x110 [dm_multipath] free_multipath+0x94/0xe0 [dm_multipath] dm_table_destroy+0xa2/0x1e0 [dm_mod] __dm_destroy+0x196/0x350 [dm_mod] dev_remove+0x10c/0x160 [dm_mod] ctl_ioctl+0x2c2/0x590 [dm_mod] dm_ctl_ioctl+0x5/0x10 [dm_mod] __x64_sys_ioctl+0xb4/0xf0 dm_ctl_ioctl+0x5/0x10 [dm_mod] __x64_sys_ioctl+0xb4/0xf0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0

An issue was discovered in the Linux kernel 5.10.x before 5.10.155. A use-after-free in io_sqpoll_wait_sq in fs/io_uring.c allows an attacker to crash the kernel, resulting in denial of service. finish_wait can be skipped. An attack can occur in some situations by forking a process and then quickly terminating it. NOTE: later kernel versions, such as the 5.15 longterm series, substantially changed the implementation of io_sqpoll_wait_sq.

A vulnerability was found in X.Org. This security flaw occurs because the handler for the XvdiSelectVideoNotify request may write to memory after it has been freed. This issue can lead to local privileges elevation on systems where the X se

The tcpmss_mangle_packet function in net/netfilter/xt_TCPMSS.c in the Linux kernel before 4.11, and 4.9.x before 4.9.36, allows remote attackers to cause a denial of service (use-after-free and memory corruption) or possibly have unspecified other impact by leveraging the presence of xt_TCPMSS in an iptables action.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix management of listener transports Currently, when no active threads are running, a root user using nfsdctl command can try to remove a particular listener from the list of previously added ones, then start the server by increasing the number of threads, it leads to the following problem: [ 158.835354] refcount_t: addition on 0; use-after-free. [ 158.835603] WARNING: CPU: 2 PID: 9145 at lib/refcount.c:25 refcount_warn_saturate+0x160/0x1a0 [ 158.836017] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd auth_rpcgss nfs_acl lockd grace overlay isofs uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common snd_hda_codec_generic mc e1000e snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore sg loop dm_multipath dm_mod nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs libcrc32c crct10dif_ce ghash_ce vmwgfx sha2_ce sha256_arm64 sr_mod sha1_ce cdrom nvme drm_client_lib drm_ttm_helper ttm nvme_core drm_kms_helper nvme_auth drm fuse [ 158.840093] CPU: 2 UID: 0 PID: 9145 Comm: nfsd Kdump: loaded Tainted: G B W 6.13.0-rc6+ #7 [ 158.840624] Tainted: [B]=BAD_PAGE, [W]=WARN [ 158.840802] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 158.841220] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 158.841563] pc : refcount_warn_saturate+0x160/0x1a0 [ 158.841780] lr : refcount_warn_saturate+0x160/0x1a0 [ 158.842000] sp : ffff800089be7d80 [ 158.842147] x29: ffff800089be7d80 x28: ffff00008e68c148 x27: ffff00008e68c148 [ 158.842492] x26: ffff0002e3b5c000 x25: ffff600011cd1829 x24: ffff00008653c010 [ 158.842832] x23: ffff00008653c000 x22: 1fffe00011cd1829 x21: ffff00008653c028 [ 158.843175] x20: 0000000000000002 x19: ffff00008653c010 x18: 0000000000000000 [ 158.843505] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 158.843836] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600050a26493 [ 158.844143] x11: 1fffe00050a26492 x10: ffff600050a26492 x9 : dfff800000000000 [ 158.844475] x8 : 00009fffaf5d9b6e x7 : ffff000285132493 x6 : 0000000000000001 [ 158.844823] x5 : ffff000285132490 x4 : ffff600050a26493 x3 : ffff8000805e72bc [ 158.845174] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000098588000 [ 158.845528] Call trace: [ 158.845658] refcount_warn_saturate+0x160/0x1a0 (P) [ 158.845894] svc_recv+0x58c/0x680 [sunrpc] [ 158.846183] nfsd+0x1fc/0x348 [nfsd] [ 158.846390] kthread+0x274/0x2f8 [ 158.846546] ret_from_fork+0x10/0x20 [ 158.846714] ---[ end trace 0000000000000000 ]--- nfsd_nl_listener_set_doit() would manipulate the list of transports of server's sv_permsocks and close the specified listener but the other list of transports (server's sp_xprts list) would not be changed leading to the problem above. Instead, determined if the nfsdctl is trying to remove a listener, in which case, delete all the existing listener transports and re-create all-but-the-removed ones.

An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_frontend.c has a race condition that can cause a use-after-free when a device is disconnected.

An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_net.c has a .disconnect versus dvb_device_open race condition that leads to a use-after-free.

The receive_msg function in receive.c in the SMTP daemon in Exim 4.88 and 4.89 allows remote attackers to execute arbitrary code or cause a denial of service (use-after-free) via vectors involving BDAT commands.

In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix use after free vulnerability in switchtec_ntb_remove due to race condition In the switchtec_ntb_add function, it can call switchtec_ntb_init_sndev function, then &sndev->check_link_status_work is bound with check_link_status_work. switchtec_ntb_link_notification may be called to start the work. If we remove the module which will call switchtec_ntb_remove to make cleanup, it will free sndev through kfree(sndev), while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | check_link_status_work switchtec_ntb_remove | kfree(sndev); | | if (sndev->link_force_down) | // use sndev Fix it by ensuring that the work is canceled before proceeding with the cleanup in switchtec_ntb_remove.

In VideoLAN VLC media player through 2.2.8, there is a type conversion vulnerability in modules/demux/mp4/libmp4.c in the MP4 demux module leading to a invalid free, because the type of a box may be changed between a read operation and a free operation.

The __oom_reap_task_mm function in mm/oom_kill.c in the Linux kernel before 4.14.4 mishandles gather operations, which allows attackers to cause a denial of service (TLB entry leak or use-after-free) or possibly have unspecified other impact by triggering a copy_to_user call within a certain time window.

In FreeRDP before version 2.1.2, there is a use-after-free in gdi_SelectObject. All FreeRDP clients using compatibility mode with /relax-order-checks are affected. This is fixed in version 2.1.2.

In the Linux kernel, the following vulnerability has been resolved: net/ncsi: Disable the ncsi work before freeing the associated structure The work function can run after the ncsi device is freed, resulting in use-after-free bugs or kernel panic.

Keystone Engine 0.9.2 has a use-after-free in llvm_ks::X86Operand::getToken.

In the Linux kernel, the following vulnerability has been resolved: nbd: fix race between timeout and normal completion If request timetout is handled by nbd_requeue_cmd(), normal completion has to be stopped for avoiding to complete this requeued request, other use-after-free can be triggered. Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime make sure that cmd->lock is grabbed for clearing the flag and the requeue.

An issue was discovered in the Linux kernel before 5.10. drivers/infiniband/core/ucma.c has a use-after-free because the ctx is reached via the ctx_list in some ucma_migrate_id situations where ucma_close is called, aka CID-f5449e74802c.

An issue was discovered in netfilter in the Linux kernel before 5.10. There can be a use-after-free in the packet processing context, because the per-CPU sequence count is mishandled during concurrent iptables rules replacement. This could be exploited with the CAP_NET_ADMIN capability in an unprivileged namespace. NOTE: cc00bca was reverted in 5.12.

A flaw was found in libwebp in versions before 1.0.1. A use-after-free was found due to a thread being killed too early. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

A race condition in the Linux kernel before 5.6.2 between the VT_DISALLOCATE ioctl and closing/opening of ttys could lead to a use-after-free.

A use after free in the Linux kernel infiniband hfi1 driver in versions prior to 5.10-rc6 was found in the way user calls Ioctl after open dev file and fork. A local user could use this flaw to crash the system.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: add refcnt to ksmbd_conn struct When sending an oplock break request, opinfo->conn is used, But freed ->conn can be used on multichannel. This patch add a reference count to the ksmbd_conn struct so that it can be freed when it is no longer used.

An issue was discovered in Xen through 4.14.x. Xenstored and guests communicate via a shared memory page using a specific protocol. When a guest violates this protocol, xenstored will drop the connection to that guest. Unfortunately, this is done by just removing the guest from xenstored's internal management, resulting in the same actions as if the guest had been destroyed, including sending an @releaseDomain event. @releaseDomain events do not say that the guest has been removed. All watchers of this event must look at the states of all guests to find the guest that has been removed. When an @releaseDomain is generated due to a domain xenstored protocol violation, because the guest is still running, the watchers will not react. Later, when the guest is actually destroyed, xenstored will no longer have it stored in its internal data base, so no further @releaseDomain event will be sent. This can lead to a zombie domain; memory mappings of that guest's memory will not be removed, due to the missing event. This zombie domain will be cleaned up only after another domain is destroyed, as that will trigger another @releaseDomain event. If the device model of the guest that violated the Xenstore protocol is running in a stub-domain, a use-after-free case could happen in xenstored, after having removed the guest from its internal data base, possibly resulting in a crash of xenstored. A malicious guest can block resources of the host for a period after its own death. Guests with a stub domain device model can eventually crash xenstored, resulting in a more serious denial of service (the prevention of any further domain management operations). Only the C variant of Xenstore is affected; the Ocaml variant is not affected. Only HVM guests with a stubdom device model can cause a serious DoS.

An issue was discovered in the Linux kernel through 5.10.1, as used with Xen through 4.14.x. The Linux kernel PV block backend expects the kernel thread handler to reset ring->xenblkd to NULL when stopped. However, the handler may not have time to run if the frontend quickly toggles between the states connect and disconnect. As a consequence, the block backend may re-use a pointer after it was freed. A misbehaving guest can trigger a dom0 crash by continuously connecting / disconnecting a block frontend. Privilege escalation and information leaks cannot be ruled out. This only affects systems with a Linux blkback.

ImageMagick before 6.9.9-24 and 7.x before 7.0.7-12 has a use-after-free in Magick::Image::read in Magick++/lib/Image.cpp.

A locking inconsistency issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_io.c and drivers/tty/tty_jobctrl.c may allow a read-after-free attack against TIOCGSID, aka CID-c8bcd9c5be24.

The init_new_context function in arch/x86/include/asm/mmu_context.h in the Linux kernel before 4.12.10 does not correctly handle errors from LDT table allocation when forking a new process, allowing a local attacker to achieve a use-after-free or possibly have unspecified other impact by running a specially crafted program. This vulnerability only affected kernels built with CONFIG_MODIFY_LDT_SYSCALL=y.

In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix possible use-after-free and null-ptr-deref The pernet operations structure for the subsystem must be registered before registering the generic netlink family.

In the Linux kernel, the following vulnerability has been resolved: jfs: Fix uaf in dbFreeBits [syzbot reported] ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216 CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 __mutex_lock_common kernel/locking/mutex.c:587 [inline] __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline] dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Freed by task 5218: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kfree+0x149/0x360 mm/slub.c:4594 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454 reconfigure_super+0x445/0x880 fs/super.c:1083 vfs_cmd_reconfigure fs/fsopen.c:263 [inline] vfs_fsconfig_locked fs/fsopen.c:292 [inline] __do_sys_fsconfig fs/fsopen.c:473 [inline] __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Analysis] There are two paths (dbUnmount and jfs_ioc_trim) that generate race condition when accessing bmap, which leads to the occurrence of uaf. Use the lock s_umount to synchronize them, in order to avoid uaf caused by race condition.

The usb_serial_console_disconnect function in drivers/usb/serial/console.c in the Linux kernel before 4.13.8 allows local users to cause a denial of service (use-after-free and system crash) or possibly have unspecified other impact via a crafted USB device, related to disconnection and failed setup.

An issue was discovered in Xen through 4.14.x allowing x86 guest OS users to cause a host OS denial of service, achieve data corruption, or possibly gain privileges by exploiting a race condition that leads to a use-after-free involving 2MiB and 1GiB superpages.

Use-after-free vulnerability in Google Chrome before 8.0.552.215 allows remote attackers to cause a denial of service or possibly have unspecified other impact via vectors involving SVG animations.

A vulnerability was found in Linux kernel, where a use-after-frees in nouveau's postclose() handler could happen if removing device (that is not common to remove video card physically without power-off, but same happens if "unbind" the driver).

A use after free issue was addressed with improved memory management. This issue is fixed in macOS Big Sur 11.0.1, watchOS 7.1, iOS 14.2 and iPadOS 14.2, iCloud for Windows 11.5, Safari 14.0.1, tvOS 14.2, iTunes 12.11 for Windows. Processing maliciously crafted web content may lead to arbitrary code execution.

A use-after-free flaw caused by a race among the superblock operations in the gadgetfs Linux driver was found. It could be triggered by yanking out a device that is running the gadgetfs side.

QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not checked.

An issue was discovered in InspIRCd 2 before 2.0.29 and 3 before 3.6.0. The pgsql module contains a use after free vulnerability. When combined with the sqlauth or sqloper modules, this vulnerability can be used for remote crashing of an InspIRCd server by any user able to connect to a server.

A heap-use-after-free in the av_freep function in libavutil/mem.c of FFmpeg 4.2 allows attackers to execute arbitrary code.

A use after free vulnerability in ip_reass() in ip_input.c of libslirp 4.2.0 and prior releases allows crafted packets to cause a denial of service.

A heap-use-after-free in the mpeg_mux_write_packet function in libavformat/mpegenc.c of FFmpeg 4.2 allows to cause a denial of service (DOS) via a crafted avi file.

A use-after-free vulnerability introduced in glibc upstream version 2.14 was found in the way the tilde expansion was carried out. Directory paths containing an initial tilde followed by a valid username were affected by this issue. A local attacker could exploit this flaw by creating a specially crafted path that, when processed by the glob function, would potentially lead to arbitrary code execution. This was fixed in version 2.32.

PlayerGeneric.cpp in MilkyTracker through 1.02.00 has a use-after-free in the PlayerGeneric destructor.