arm: guest_physmap_remove_page not removing the p2m mappings The functions to remove one or more entries from a guest p2m pagetable on Arm (p2m_remove_mapping, guest_physmap_remove_page, and p2m_set_entry with mfn set to INVALID_MFN) do not actually clear the pagetable entry if the entry doesn't have the valid bit set. It is possible to have a valid pagetable entry without the valid bit set when a guest operating system uses set/way cache maintenance instructions. For instance, a guest issuing a set/way cache maintenance instruction, then calling the XENMEM_decrease_reservation hypercall to give back memory pages to Xen, might be able to retain access to those pages even after Xen started reusing them for other purposes.

An issue was discovered in the Linux kernel 4.18 through 5.10.16, as used by Xen. The backend allocation (aka be-alloc) mode of the drm_xen_front drivers was not meant to be a supported configuration, but this wasn't stated accordingly in its support status entry.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix the locking used by afs_get_link() The afs filesystem in the kernel doesn't do locking correctly for symbolic links. There are a number of problems: (1) It doesn't do any locking around afs_read_single() to prevent races between multiple ->get_link() calls, thereby allowing the possibility of leaks. (2) It doesn't use RCU barriering when accessing the buffer pointers during RCU pathwalk. (3) It can race with another thread updating the contents of the symlink if a third party updated it on the server. Fix this by the following means: (0) Move symlink handling into its own file as this makes it more complicated. (1) Take the validate_lock around afs_read_single() to prevent races between multiple ->get_link() calls. (2) Keep a separate copy of the symlink contents with an rcu_head. This is always going to be a lot smaller than a page, so it can be kmalloc'd and save quite a bit of memory. It also needs a refcount for non-RCU pathwalk. (3) Split the symlink read and write-to-cache routines in afs from those for directories. (4) Discard the I/O buffer as soon as the write-to-cache completes as this is a full page (plus a folio_queue). (5) If there's no cache, discard the I/O buffer immediately after reading and copying if there is no cache.

Firejail before 0.9.64.4 allows attackers to bypass intended access restrictions because there is a TOCTOU race condition between a stat operation and an OverlayFS mount operation.

In the Linux kernel, the following vulnerability has been resolved: irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0. After irq_work_single() clears BUSY via atomic_cmpxchg(), it still dereferences @work for irq_work_is_hard() and rcuwait_wake_up(). An irq_work_sync() caller on another CPU that enters after BUSY is cleared can observe BUSY==0 immediately, return, and free the work before those accesses complete — causing a use-after-free. Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire irq_work_single() execution is within an RCU read-side critical section. Then add synchronize_rcu() in irq_work_sync() after rcuwait_wait_event() to ensure the caller waits for the RCU grace period before returning, preventing premature frees.

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix register corruption from uninitialized cregs on error compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when user_regset_copyin() fails. Since cregs is an uninitialized stack variable, a copyin failure causes uninitialized stack data to be written into the target task's pt_regs, corrupting its register state and potentially leaking kernel stack contents. compat_restore_sigcontext() has the same issue: it calls cregs_to_regs() even when __copy_from_user() fails, leading to the same corruption of the signal-returning task's register state on error. Only call cregs_to_regs() when the user copy succeeds.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Validate GPIO pin LUT table size before iterating [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3)

An issue was discovered in the Linux kernel 3.11 through 5.10.16, as used by Xen. To service requests to the PV backend, the driver maps grant references provided by the frontend. In this process, errors may be encountered. In one case, an error encountered earlier might be discarded by later processing, resulting in the caller assuming successful mapping, and hence subsequent operations trying to access space that wasn't mapped. In another case, internal state would be insufficiently updated, preventing safe recovery from the error. This affects drivers/block/xen-blkback/blkback.c.

In the Linux kernel, the following vulnerability has been resolved: PCI: s390: Fix use-after-free of PCI resources with per-function hotplug On s390 PCI functions may be hotplugged individually even when they belong to a multi-function device. In particular on an SR-IOV device VFs may be removed and later re-added. In commit a50297cf8235 ("s390/pci: separate zbus creation from scanning") it was missed however that struct pci_bus and struct zpci_bus's resource list retained a reference to the PCI functions MMIO resources even though those resources are released and freed on hot-unplug. These stale resources may subsequently be claimed when the PCI function re-appears resulting in use-after-free. One idea of fixing this use-after-free in s390 specific code that was investigated was to simply keep resources around from the moment a PCI function first appeared until the whole virtual PCI bus created for a multi-function device disappears. The problem with this however is that due to the requirement of artificial MMIO addreesses (address cookies) extra logic is then needed to keep the address cookies compatible on re-plug. At the same time the MMIO resources semantically belong to the PCI function so tying their lifecycle to the function seems more logical. Instead a simpler approach is to remove the resources of an individually hot-unplugged PCI function from the PCI bus's resource list while keeping the resources of other PCI functions on the PCI bus untouched. This is done by introducing pci_bus_remove_resource() to remove an individual resource. Similarly the resource also needs to be removed from the struct zpci_bus's resource list. It turns out however, that there is really no need to add the MMIO resources to the struct zpci_bus's resource list at all and instead we can simply use the zpci_bar_struct's resource pointer directly.

An issue was discovered in the Linux kernel through 5.11.3. Certain iSCSI data structures do not have appropriate length constraints or checks, and can exceed the PAGE_SIZE value. An unprivileged user can send a Netlink message that is associated with iSCSI, and has a length up to the maximum length of a Netlink message.

avahi-daemon-check-dns.sh in the Debian avahi package through 0.8-4 is executed as root via /etc/network/if-up.d/avahi-daemon, and allows a local attacker to cause a denial of service or create arbitrary empty files via a symlink attack on files under /run/avahi-daemon. NOTE: this only affects the packaging for Debian GNU/Linux (used indirectly by SUSE), not the upstream Avahi product.

Improper input validation in NI-PAL may allow a local authenticated user to access arbitrary system memory, potentially leading to privilege escalation. This vulnerability affects NI-PAL 26.3.0 and prior versions on Windows and Linux.

kernel/trace/trace_syscalls.c in the Linux kernel through 3.17.2 does not properly handle private syscall numbers during use of the ftrace subsystem, which allows local users to gain privileges or cause a denial of service (invalid pointer dereference) via a crafted application.

BSD mailx 8.1.2 and earlier allows remote attackers to execute arbitrary commands via a crafted email address.

In the Linux kernel, the following vulnerability has been resolved: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations.

AWStats 8.0 is vulnerable to Command Injection via the open function

In the Linux kernel, the following vulnerability has been resolved: ALSA: asihpi: Fix potential OOB array access at reading cache find_control() to retrieve a cached info accesses the array with the given index blindly, which may lead to an OOB array access. Add a sanity check for avoiding it.

In the Linux kernel, the following vulnerability has been resolved: io-wq: check that the predecessor is hashed in io_wq_remove_pending() io_wq_remove_pending() needs to fix up wq->hash_tail[] if the cancelled work was the tail of its hash bucket. When doing this, it checks whether the preceding entry in acct->work_list has the same hash value, but never checks that the predecessor is hashed at all. io_get_work_hash() is simply atomic_read(&work->flags) >> IO_WQ_HASH_SHIFT, and the hash bits are never set for non-hashed work, so it returns 0. Thus, when a hashed bucket-0 work is cancelled while a non-hashed work is its list predecessor, the check spuriously passes and a pointer to the non-hashed io_kiocb is stored in wq->hash_tail[0]. Because non-hashed work is dequeued via the fast path in io_get_next_work(), which never touches hash_tail[], the stale pointer is never cleared. Therefore, after the non-hashed io_kiocb completes and is freed back to req_cachep, wq->hash_tail[0] is a dangling pointer. The io_wq is per-task (tctx->io_wq) and survives ring open/close, so the dangling pointer persists for the lifetime of the task; the next hashed bucket-0 enqueue dereferences it in io_wq_insert_work() and wq_list_add_after() writes through freed memory. Add the missing io_wq_is_hashed() check so a non-hashed predecessor never inherits a hash_tail[] slot.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities.

The Linux kernel before 2.6.25.10 does not properly perform tty operations, which allows local users to cause a denial of service (system crash) or possibly gain privileges via vectors involving NULL pointer dereference of function pointers in (1) hamradio/6pack.c, (2) hamradio/mkiss.c, (3) irda/irtty-sir.c, (4) ppp_async.c, (5) ppp_synctty.c, (6) slip.c, (7) wan/x25_asy.c, and (8) wireless/strip.c in drivers/net/.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on f2fs_get_node_folio_ra() kernel BUG at fs/f2fs/file.c:845! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845 Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90 RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283 RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000 RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504 RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002 R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0 Call Trace: <TASK> f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882 f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940 f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907 evict+0x61e/0xb10 fs/inode.c:841 f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224 get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694 vfs_get_tree+0x92/0x2a0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3758 [inline] do_new_mount+0x341/0xd30 fs/namespace.c:3834 do_mount fs/namespace.c:4167 [inline] __do_sys_mount fs/namespace.c:4383 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4360 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f count = ADDRS_PER_PAGE(dn.node_folio, inode); count -= dn.ofs_in_node; f2fs_bug_on(sbi, count < 0); The fuzz test will trigger above bug_on in f2fs. The root cause should be: in the corrupted inode, there is a direct node which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(), after f2fs_get_dnode_of_data() finds such dnode: 1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923 2) once dn.ofs_in_node points to addr[923, 1017] Then it will trigger the system panic. Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should not be an inode or xattr node, and then use it in below path to detect inconsistent node chain in inode mapping table: - f2fs_do_truncate_blocks - f2fs_get_dnode_of_data - f2fs_get_node_folio_ra - __get_node_folio - f2fs_sanity_check_node_footer - case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode

In the Linux kernel, the following vulnerability has been resolved: dma-buf: fix UAF in dma_buf_fd() tracepoint Once FD_ADD() returns, the fd is live in the file descriptor table and a thread sharing that table can close() it before DMA_BUF_TRACE() runs. The close drops the last reference, __fput() frees the dma_buf, and the tracepoint then dereferences dmabuf to take dmabuf->name_lock -- slab-use-after-free. Split FD_ADD() back into get_unused_fd_flags() + fd_install() and emit the tracepoint between them. While the fdtable slot is reserved with a NULL file pointer, a racing close() returns -EBADF without entering __fput(), so the dma_buf stays alive across the trace. Same approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put() tracepoint"). This undoes the FD_ADD() conversion done in commit 34dfce523c90 ("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to hook the tracepoint safely.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: fs210x: fix possible buffer overflow In fs210x_effect_scene_info(), a string was copied like this: strscpy(DST, SRC, strlen(SRC) + 1); A buffer overflow would happen if strlen(SRC) >= sizeof(DST). Actually, strscpy() must be used this way: strscpy(DST, SRC, sizeof(DST)); strscpy(DST, SRC); // defaults to sizeof(DST)

In the Linux kernel, the following vulnerability has been resolved: net: mctp: usb: fix race between urb completion and rx_retry cancellation It's possible that sequencing between setting ->stopped and cancelling the rx_retry work (in ndo_stop) could leave us with an urb queued: T1: ndo_stop T2: rx_retry_work ------------ ---------------- LD: ->stopped => false ST: ->stopped <= true usb_kill_urb() mctp_usb_rx_queue() usb_submit_urb() cancel_delayed_work_sync() That urb completion can then re-schedule rx_retry_work. Strenghen the sequencing between the stop (preventing another requeue) and the cancel by updating both atomically under a new rx lock. After setting ->rx_stopped, and cancelling pending work, we know that the requeue cannot occur, so all that's left is killing any pending urb.

Use After Free vulnerability in nfc sockets in the Linux Kernel before 5.12.4 allows local attackers to elevate their privileges. In typical configurations, the issue can only be triggered by a privileged local user with the CAP_NET_RAW capability.

In the Linux kernel, the following vulnerability has been resolved: l2tp: use refcount_inc_not_zero in l2tp_session_get_by_ifname A reader in l2tp_session_get_by_ifname() can return a pointer to a session whose refcount has reached zero. The getter takes its reference with plain refcount_inc(), but every other session getter in the same file (l2tp_v2_session_get, l2tp_v3_session_get, and the corresponding _get_next variants) uses refcount_inc_not_zero() because the IDR/RCU lookup can race with refcount_dec_and_test() -> l2tp_session_free() -> kfree_rcu(). The ifname getter is the only outlier; the inconsistency was raised on-list after 979c017803c4 ("l2tp: use list_del_rcu in l2tp_session_unhash"). A reader inside rcu_read_lock_bh() that matches session->ifname can be preempted between the strcmp() and the refcount_inc(). If the last reference drops on another CPU in that window, the reader's refcount_inc() runs on a counter that has reached zero. refcount_t catches the addition-on-zero, prints "refcount_t: addition on 0; use-after-free", saturates the counter, and returns the saturated pointer to the caller. Session memory is held live by the in-flight RCU read section, but the kfree_rcu() callback queued from l2tp_session_free() will free it once the grace period closes; a caller that dereferences the returned session past that point hits a slab-use-after-free. On PREEMPT_RT local_bh_disable() is a per-CPU sleeping lock and the preemption window is real; on stock PREEMPT kernels local_bh_disable() is a preempt_count increment that closes the cross-CPU race in practice (see below). Use refcount_inc_not_zero() and continue the list walk on failure, matching the other session getters in the file. The ifname getter is the only session getter in net/l2tp/ that still uses the bare refcount_inc() pattern; this change restores file-internal consistency. The success path is unchanged.

In the Linux kernel, the following vulnerability has been resolved: f2fs: validate compress cache inode only when enabled F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode number for the compressed page cache inode. That inode only exists when the compress_cache mount option is enabled. When compress_cache is disabled, max_nid is outside the valid inode range. A corrupted directory entry that points to ino == max_nid should therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino() currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally, so f2fs_iget() bypasses do_read_inode() and its nid range check, and instantiates a fake internal inode instead. Gate the compressed cache inode case on COMPRESS_CACHE, matching f2fs_init_compress_inode(). With compress_cache disabled, ino == max_nid now follows the normal inode path and is rejected as an out-of-range nid.

A heap out-of-bounds write affecting Linux since v2.6.19-rc1 was discovered in net/netfilter/x_tables.c. This allows an attacker to gain privileges or cause a DoS (via heap memory corruption) through user name space

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Don't setup bogus iov_iter for silencing At transition to the iov_iter for PCM data transfer, we blindly applied the iov_iter setup also for silencing (i.e. data = NULL), and it leads to a calculation of bogus iov_iter. Fortunately this didn't cause troubles on most of architectures but it goes wrong on RISC-V now, causing a NULL dereference. Handle the NULL data case to treat the silencing in interleaved_copy() for addressing the bug above. noninterleaved_copy() has already the NULL data handling, so it doesn't need changes.

In the Linux kernel, the following vulnerability has been resolved: mm/zone_device: do not touch device folio after calling ->folio_free() The contents of a device folio can immediately change after calling ->folio_free(), as the folio may be reallocated by a driver with a different order. Instead of touching the folio again to extract the pgmap, use the local stack variable when calling percpu_ref_put_many().

An issue was discovered in Linux: KVM through Improper handling of VM_IO|VM_PFNMAP vmas in KVM can bypass RO checks and can lead to pages being freed while still accessible by the VMM and guest. This allows users with the ability to start and control a VM to read/write random pages of memory and can result in local privilege escalation.

In the Linux kernel, the following vulnerability has been resolved: mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special() On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a "WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by "BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when reclaim gets to call shrink_huge_zero_folio_scan(). It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and indeed, whereas pte_special() and pte_mkspecial() are subject to a dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial() are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on any 32-bit architecture. While the problem was exposed through commit d80a9cb1a64a ("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an oversight in commit af38538801c6 ("mm/memory: factor out common code from vm_normal_page_*()") and would result in other problems: * huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and numamaps as file-backed THP * folio_walk_start() returning the folio even without FW_ZEROPAGE set. Callers seem to tolerate that, though. ... and triggering the VM_WARN_ON_ONE(), although never reported so far. To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider whether pmd_special/pud_special is actually implemented.

In the Linux kernel, the following vulnerability has been resolved: lib: test_hmm: evict device pages on file close to avoid use-after-free Patch series "Minor hmm_test fixes and cleanups". Two bugfixes a cleanup for the HMM kernel selftests. These were mostly reported by Zenghui Yu with special thanks to Lorenzo for analysing and pointing out the problems. This patch (of 3): When dmirror_fops_release() is called it frees the dmirror struct but doesn't migrate device private pages back to system memory first. This leaves those pages with a dangling zone_device_data pointer to the freed dmirror. If a subsequent fault occurs on those pages (eg. during coredump) the dmirror_devmem_fault() callback dereferences the stale pointer causing a kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64, where a test failure triggered SIGABRT and the resulting coredump walked the VMAs faulting in the stale device private pages. Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in dmirror_fops_release() to migrate all device private pages back to system memory before freeing the dmirror struct. The function is moved earlier in the file to avoid a forward declaration.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.0.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 0f43893d3cd478fa57836697525b338817c9c23d)

In the Linux kernel, the following vulnerability has been resolved: vmalloc: fix buffer overflow in vrealloc_node_align() Commit 4c5d3365882d ("mm/vmalloc: allow to set node and align in vrealloc") added the ability to force a new allocation if the current pointer is on the wrong NUMA node, or if an alignment constraint is not met, even if the user is shrinking the allocation. On this path (need_realloc), the code allocates a new object of 'size' bytes and then memcpy()s 'old_size' bytes into it. If the request is to shrink the object (size < old_size), this results in an out-of-bounds write on the new buffer. Fix this by bounding the copy length by the new allocation size.

In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf().

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v2.5 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 3216a7f4e2642bda5fd14f57586e835ae9202587)

In the Linux kernel, the following vulnerability has been resolved: mtd: docg3: fix use-after-free in docg3_release() In docg3_release(), the docg3 pointer is obtained from cascade->floors[0]->priv before the loop that calls doc_release_device() on each floor. doc_release_device() frees the docg3 struct via kfree(docg3) at line 1881. After the loop, docg3->cascade->bch dereferences the already-freed pointer. Fix this by accessing cascade->bch directly, which is equivalent since docg3->cascade points back to the same cascade struct, and is already available as a local variable. This also removes the now-unused docg3 local variable.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v4.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit fd852c048b46f9825e904a4f3f4538fe9d8827d9)

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free in llcp_sock_release() llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: move to two-stage removal scheme Like previous patches for x_tables, follow same pattern in ebtables. We can't reuse xt helpers: ebt_table struct layout is incompatible. table->ops assignment is now done while still holding the ebt mutex to make sure we never expose partially-filled table struct.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/jpeg: set no_user_fence for JPEG v5.3.0 ring JPEG rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 86ac011ae234c03fb872f4945913391ea1d8862e)

In the Linux kernel, the following vulnerability has been resolved: dm: fix a buffer overflow in ioctl processing Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally

In the Linux kernel, the following vulnerability has been resolved: KEYS: fix overflow in keyctl_pkey_params_get_2() The length for the internal output buffer is calculated incorrectly, which can result overflow when a too small buffer is provided. Fix the bug by allocating internal output with the size of the maximum length of the cryptographic primitive instead of caller provided size.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317)

In the Linux kernel, the following vulnerability has been resolved: dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work The change_work was introduced to send device change notifications from DPLL device callbacks without deadlocking on dpll_lock, since the callbacks are already invoked under that lock. Now that __dpll_device_change_ntf() is exported for callers that already hold dpll_lock, use it directly and remove the change_work infrastructure entirely. This eliminates a race condition where change_work could be re-scheduled after cancel_work_sync() during device teardown, potentially causing the handler to dereference a freed or NULL dpll_dev pointer.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: add and use xtables_unregister_table_exit Previous change added xtables_unregister_table_pre_exit to detach the table from the packetpath and to unlink it from the active table list. In case of rmmod, userspace that is doing set/getsockopt for this table will not be able to re-instantiate the table: 1. The larval table has been removed already 2. existing instantiated table is no longer on the xt pernet table list. This adds the second stage helper: unlink the table from the dying list, free the hook ops (if any) and do the audit notification. It replaces xt_unregister_table().

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer adm1266_pmbus_block_xfer() sets up the read transaction with .buf = data->read_buf, .len = ADM1266_PMBUS_BLOCK_MAX + 2, but read_buf in struct adm1266_data is declared as u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1]; For a max-length block response (length byte = 255 + up to 1 PEC byte), the i2c controller is told to write 257 bytes into a 256-byte buffer, putting one byte past the end of read_buf. The same response also makes the subsequent PEC compare if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) read a byte beyond the array. Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the buffer can hold the length byte, up to 255 payload bytes, and the PEC byte the i2c_msg length already accounts for.

In the Linux kernel, the following vulnerability has been resolved: spi: topcliff-pch: fix use-after-free on unbind Give the driver a chance to flush its queue before releasing the DMA buffers on driver unbind

In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: fix use-after-free in scpsys_get_bus_protection_legacy() In scpsys_get_bus_protection_legacy(), of_find_node_with_property() returns a device node with its reference count incremented. The function then calls of_node_put(node) before checking whether syscon_regmap_lookup_by_phandle() returns an error. If an error occurs, dev_err_probe() dereferences the node pointer to print diagnostic information, but the node memory may have already been freed due to the earlier of_node_put(), leading to a use-after-free vulnerability. Fix this by moving the of_node_put() call after the error check, ensuring the node is still valid when accessed in the error path.