In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix off by one in hdmi_14_process_transaction() The hdcp_i2c_offsets[] array did not have an entry for HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one read overflow. I added an entry and copied the 0x0 value for the offset from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c. I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX entries. This doesn't change the code, but it's just a belt and suspenders approach to try future proof the code.

In the Linux kernel, the following vulnerability has been resolved: media: staging/intel-ipu3: Fix set_fmt error handling If there in an error during a set_fmt, do not overwrite the previous sizes with the invalid config. Without this patch, v4l2-compliance ends up allocating 4GiB of RAM and causing the following OOPs [ 38.662975] ipu3-imgu 0000:00:05.0: swiotlb buffer is full (sz: 4096 bytes) [ 38.662980] DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:00:05.0 [ 38.663010] general protection fault: 0000 [#1] PREEMPT SMP

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix overflows checks in provide buffers Colin reported before possible overflow and sign extension problems in io_provide_buffers_prep(). As Linus pointed out previous attempt did nothing useful, see d81269fecb8ce ("io_uring: fix provide_buffers sign extension"). Do that with help of check_<op>_overflow helpers. And fix struct io_provide_buf::len type, as it doesn't make much sense to keep it signed.

In the Linux kernel, the following vulnerability has been resolved: tee: optee: Fix incorrect page free bug Pointer to the allocated pages (struct page *page) has already progressed towards the end of allocation. It is incorrect to perform __free_pages(page, order) using this pointer as we would free any arbitrary pages. Fix this by stop modifying the page pointer.

In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines")

In the Linux kernel, the following vulnerability has been resolved: dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails When loading a device-mapper table for a request-based mapped device, and the allocation/initialization of the blk_mq_tag_set for the device fails, a following device remove will cause a double free. E.g. (dmesg): device-mapper: core: Cannot initialize queue for request-based dm-mq mapped device device-mapper: ioctl: unable to set up device queue for new table. Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0305e098835de000 TEID: 0305e098835de803 Fault in home space mode while using kernel ASCE. AS:000000025efe0007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... lots of modules ... Supported: Yes, External CPU: 0 PID: 7348 Comm: multipathd Kdump: loaded Tainted: G W X 5.3.18-53-default #1 SLE15-SP3 Hardware name: IBM 8561 T01 7I2 (LPAR) Krnl PSW : 0704e00180000000 000000025e368eca (kfree+0x42/0x330) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 000000000000004a 000000025efe5230 c1773200d779968d 0000000000000000 000000025e520270 000000025e8d1b40 0000000000000003 00000007aae10000 000000025e5202a2 0000000000000001 c1773200d779968d 0305e098835de640 00000007a8170000 000003ff80138650 000000025e5202a2 000003e00396faa8 Krnl Code: 000000025e368eb8: c4180041e100 lgrl %r1,25eba50b8 000000025e368ebe: ecba06b93a55 risbg %r11,%r10,6,185,58 #000000025e368ec4: e3b010000008 ag %r11,0(%r1) >000000025e368eca: e310b0080004 lg %r1,8(%r11) 000000025e368ed0: a7110001 tmll %r1,1 000000025e368ed4: a7740129 brc 7,25e369126 000000025e368ed8: e320b0080004 lg %r2,8(%r11) 000000025e368ede: b904001b lgr %r1,%r11 Call Trace: [<000000025e368eca>] kfree+0x42/0x330 [<000000025e5202a2>] blk_mq_free_tag_set+0x72/0xb8 [<000003ff801316a8>] dm_mq_cleanup_mapped_device+0x38/0x50 [dm_mod] [<000003ff80120082>] free_dev+0x52/0xd0 [dm_mod] [<000003ff801233f0>] __dm_destroy+0x150/0x1d0 [dm_mod] [<000003ff8012bb9a>] dev_remove+0x162/0x1c0 [dm_mod] [<000003ff8012a988>] ctl_ioctl+0x198/0x478 [dm_mod] [<000003ff8012ac8a>] dm_ctl_ioctl+0x22/0x38 [dm_mod] [<000000025e3b11ee>] ksys_ioctl+0xbe/0xe0 [<000000025e3b127a>] __s390x_sys_ioctl+0x2a/0x40 [<000000025e8c15ac>] system_call+0xd8/0x2c8 Last Breaking-Event-Address: [<000000025e52029c>] blk_mq_free_tag_set+0x6c/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops When allocation/initialization of the blk_mq_tag_set fails in dm_mq_init_request_queue(), it is uninitialized/freed, but the pointer is not reset to NULL; so when dev_remove() later gets into dm_mq_cleanup_mapped_device() it sees the pointer and tries to uninitialize and free it again. Fix this by setting the pointer to NULL in dm_mq_init_request_queue() error-handling. Also set it to NULL in dm_mq_cleanup_mapped_device().

In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: fix bulk flow accounting logic for host fairness In sch_cake, we keep track of the count of active bulk flows per host, when running in dst/src host fairness mode, which is used as the round-robin weight when iterating through flows. The count of active bulk flows is updated whenever a flow changes state. This has a peculiar interaction with the hash collision handling: when a hash collision occurs (after the set-associative hashing), the state of the hash bucket is simply updated to match the new packet that collided, and if host fairness is enabled, that also means assigning new per-host state to the flow. For this reason, the bulk flow counters of the host(s) assigned to the flow are decremented, before new state is assigned (and the counters, which may not belong to the same host anymore, are incremented again). Back when this code was introduced, the host fairness mode was always enabled, so the decrement was unconditional. When the configuration flags were introduced the *increment* was made conditional, but the *decrement* was not. Which of course can lead to a spurious decrement (and associated wrap-around to U16_MAX). AFAICT, when host fairness is disabled, the decrement and wrap-around happens as soon as a hash collision occurs (which is not that common in itself, due to the set-associative hashing). However, in most cases this is harmless, as the value is only used when host fairness mode is enabled. So in order to trigger an array overflow, sch_cake has to first be configured with host fairness disabled, and while running in this mode, a hash collision has to occur to cause the overflow. Then, the qdisc has to be reconfigured to enable host fairness, which leads to the array out-of-bounds because the wrapped-around value is retained and used as an array index. It seems that syzbot managed to trigger this, which is quite impressive in its own right. This patch fixes the issue by introducing the same conditional check on decrement as is used on increment. The original bug predates the upstreaming of cake, but the commit listed in the Fixes tag touched that code, meaning that this patch won't apply before that.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: md/raid1: properly indicate failure when ending a failed write request This patch addresses a data corruption bug in raid1 arrays using bitmaps. Without this fix, the bitmap bits for the failed I/O end up being cleared. Since we are in the failure leg of raid1_end_write_request, the request either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix wild memory access when clearing fragments while testing re-assembly/re-fragmentation using act_ct, it's possible to observe a crash like the following one: KASAN: maybe wild-memory-access in range [0x0001000000000448-0x000100000000044f] CPU: 50 PID: 0 Comm: swapper/50 Tainted: G S 5.12.0-rc7+ #424 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:inet_frag_rbtree_purge+0x50/0xc0 Code: 00 fc ff df 48 89 c3 31 ed 48 89 df e8 a9 7a 38 ff 4c 89 fe 48 89 df 49 89 c6 e8 5b 3a 38 ff 48 8d 7b 40 48 89 f8 48 c1 e8 03 <42> 80 3c 20 00 75 59 48 8d bb d0 00 00 00 4c 8b 6b 40 48 89 f8 48 RSP: 0018:ffff888c31449db8 EFLAGS: 00010203 RAX: 0000200000000089 RBX: 000100000000040e RCX: ffffffff989eb960 RDX: 0000000000000140 RSI: ffffffff97cfb977 RDI: 000100000000044e RBP: 0000000000000900 R08: 0000000000000000 R09: ffffed1186289350 R10: 0000000000000003 R11: ffffed1186289350 R12: dffffc0000000000 R13: 000100000000040e R14: 0000000000000000 R15: ffff888155e02160 FS: 0000000000000000(0000) GS:ffff888c31440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005600cb70a5b8 CR3: 0000000a2c014005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> inet_frag_destroy+0xa9/0x150 call_timer_fn+0x2d/0x180 run_timer_softirq+0x4fe/0xe70 __do_softirq+0x197/0x5a0 irq_exit_rcu+0x1de/0x200 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> when act_ct temporarily stores an IP fragment, restoring the skb qdisc cb results in putting random data in FRAG_CB(), and this causes those "wild" memory accesses later, when the rbtree is purged. Never overwrite the skb cb in case tcf_ct_handle_fragments() returns -EINPROGRESS.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix a buffer overflow in otx2_set_rxfh_context() This function is called from ethtool_set_rxfh() and "*rss_context" comes from the user. Add some bounds checking to prevent memory corruption.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment]

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix possible AOOB issue in mt7921_mcu_tx_rate_report Fix possible array out of bound access in mt7921_mcu_tx_rate_report. Remove unnecessary varibable in mt7921_mcu_tx_rate_report

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix txrate reporting Properly check rate_info to fix unexpected reporting. [ 1215.161863] Call trace: [ 1215.164307] cfg80211_calculate_bitrate+0x124/0x200 [cfg80211] [ 1215.170139] ieee80211s_update_metric+0x80/0xc0 [mac80211] [ 1215.175624] ieee80211_tx_status_ext+0x508/0x838 [mac80211] [ 1215.181190] mt7915_mcu_get_rx_rate+0x28c/0x8d0 [mt7915e] [ 1215.186580] mt7915_mac_tx_free+0x324/0x7c0 [mt7915e] [ 1215.191623] mt7915_queue_rx_skb+0xa8/0xd0 [mt7915e] [ 1215.196582] mt76_dma_cleanup+0x7b0/0x11d0 [mt76] [ 1215.201276] __napi_poll+0x38/0xf8 [ 1215.204668] napi_workfn+0x40/0x80 [ 1215.208062] process_one_work+0x1fc/0x390 [ 1215.212062] worker_thread+0x48/0x4d0 [ 1215.215715] kthread+0x120/0x128 [ 1215.218935] ret_from_fork+0x10/0x1c

In the Linux kernel, the following vulnerability has been resolved: net: Only allow init netns to set default tcp cong to a restricted algo tcp_set_default_congestion_control() is netns-safe in that it writes to &net->ipv4.tcp_congestion_control, but it also sets ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced. This has the unintended side-effect of changing the global net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it is read-only: 97684f0970f6 ("net: Make tcp_allowed_congestion_control readonly in non-init netns") Resolve this netns "leak" by only allowing the init netns to set the default algorithm to one that is restricted. This restriction could be removed if tcp_allowed_congestion_control were namespace-ified in the future. This bug was uncovered with https://github.com/JonathonReinhart/linux-netns-sysctl-verify

An issue was discovered in ClusterLabs crmsh through 4.2.1. Local attackers able to call "crm history" (when "crm" is run) were able to execute commands via shell code injection to the crm history commandline, potentially allowing escalation of privileges.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt.

In the Linux kernel, the following vulnerability has been resolved: tun: avoid double free in tun_free_netdev Avoid double free in tun_free_netdev() by moving the dev->tstats and tun->security allocs to a new ndo_init routine (tun_net_init()) that will be called by register_netdevice(). ndo_init is paired with the desctructor (tun_free_netdev()), so if there's an error in register_netdevice() the destructor will handle the frees. BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1 Hardware name: Red Hat KVM, BIOS Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247 kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372 ____kasan_slab_free mm/kasan/common.c:346 [inline] __kasan_slab_free+0x107/0x120 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook mm/slub.c:1749 [inline] slab_free mm/slub.c:3513 [inline] kfree+0xac/0x2d0 mm/slub.c:4561 selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605 security_tun_dev_free_security+0x4f/0x90 security/security.c:2342 tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215 netdev_run_todo+0x4df/0x840 net/core/dev.c:10627 rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112 __tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302 tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") addressed a number of underflow situations when writing temperature limits. However, it missed one situation, seen when an attempt is made to set the hysteresis value to MAX_LONG and the critical temperature limit is negative. Use clamp_val() when setting the hysteresis temperature to ensure that the provided value can never overflow or underflow.

In the Linux kernel, the following vulnerability has been resolved: virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss.

In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix READDIR buffer overflow If a client sends a READDIR count argument that is too small (say, zero), then the buffer size calculation in the new init_dirlist helper functions results in an underflow, allowing the XDR stream functions to write beyond the actual buffer. This calculation has always been suspect. NFSD has never sanity- checked the READDIR count argument, but the old entry encoders managed the problem correctly. With the commits below, entry encoding changed, exposing the underflow to the pointer arithmetic in xdr_reserve_space(). Modern NFS clients attempt to retrieve as much data as possible for each READDIR request. Also, we have no unit tests that exercise the behavior of READDIR at the lower bound of @count values. Thus this case was missed during testing.

ntfsck in NTFS-3G through 2021.8.22 has a heap-based buffer overflow involving buffer+512*3-2. NOTE: the upstream position is that ntfsck is deprecated; however, it is shipped by some Linux distributions.

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message]

In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.

In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: Fix out-of-bounds access with more than 4 slaves Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") limited the number of slaves to 3 at compile-time. The limitation was necessitated by a statically-sized array prepare_cs[] in the driver private data which contains a per-slave register value. The commit sought to enforce the limitation at run-time by setting the controller's num_chipselect to 3: Slaves with a higher chipselect are rejected by spi_add_device(). However the commit neglected that num_chipselect only limits the number of *native* chipselects. If GPIO chipselects are specified in the device tree for more than 3 slaves, num_chipselect is silently raised by of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to the statically-sized array prepare_cs[]. As a bandaid fix which is backportable to stable, raise the number of allowed slaves to 24 (which "ought to be enough for anybody"), enforce the limitation on slave ->setup and revert num_chipselect to 3 (which is the number of native chipselects supported by the controller). An upcoming for-next commit will allow an arbitrary number of slaves.

In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix initializing CQ fragments buffer The function init_cq_frag_buf() can be called to initialize the current CQ fragments buffer cq->buf, or the temporary cq->resize_buf that is filled during CQ resize operation. However, the offending commit started to use function get_cqe() for getting the CQEs, the issue with this change is that get_cqe() always returns CQEs from cq->buf, which leads us to initialize the wrong buffer, and in case of enlarging the CQ we try to access elements beyond the size of the current cq->buf and eventually hit a kernel panic. [exception RIP: init_cq_frag_buf+103] [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib] [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core] [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt] [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt] [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt] [ffff9f799ddcbec8] kthread at ffffffffa66c5da1 [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that takes the correct source buffer as a parameter.

An integer overflow in the uvesafb_setcmap function in drivers/video/fbdev/uvesafb.c in the Linux kernel before 4.17.4 could result in local attackers being able to crash the kernel or potentially elevate privileges because kmalloc_array is not used.

AIDE before 0.17.4 allows local users to obtain root privileges via crafted file metadata (such as XFS extended attributes or tmpfs ACLs), because of a heap-based buffer overflow.

The iowarrior_write function in drivers/usb/misc/iowarrior.c in the Linux kernel before 2.6.37 does not properly allocate memory, which might allow local users to trigger a heap-based buffer overflow, and consequently cause a denial of service or gain privileges, via a long report.

Buffer overflow in the clusterip_proc_write function in net/ipv4/netfilter/ipt_CLUSTERIP.c in the Linux kernel before 2.6.39 might allow local users to cause a denial of service or have unspecified other impact via a crafted write operation, related to string data that lacks a terminating '\0' character.

In the Linux kernel, the following vulnerability has been resolved: usb: phy: isp1301: fix non-OF device reference imbalance A recent change fixing a device reference leak in a UDC driver introduced a potential use-after-free in the non-OF case as the isp1301_get_client() helper only increases the reference count for the returned I2C device in the OF case. Increment the reference count also for non-OF so that the caller can decrement it unconditionally. Note that this is inherently racy just as using the returned I2C device is since nothing is preventing the PHY driver from being unbound while in use.

Exim 4.72 and earlier allows local users to gain privileges by leveraging the ability of the exim user account to specify an alternate configuration file with a directive that contains arbitrary commands, as demonstrated by the spool_directory directive.

In the Linux kernel, the following vulnerability has been resolved: mm: use aligned address in clear_gigantic_page() In current kernel, hugetlb_no_page() calls folio_zero_user() with the fault address. Where the fault address may be not aligned with the huge page size. Then, folio_zero_user() may call clear_gigantic_page() with the address, while clear_gigantic_page() requires the address to be huge page size aligned. So, this may cause memory corruption or information leak, addtional, use more obvious naming 'addr_hint' instead of 'addr' for clear_gigantic_page().

The source code tar archive of the Linux kernel 2.6.16, 2.6.17.11, and possibly other versions specifies weak permissions (0666 and 0777) for certain files and directories, which might allow local users to insert Trojan horse source code that would be used during the next kernel compilation. NOTE: another researcher disputes the vulnerability, stating that he finds "Not a single world-writable file or directory." CVE analysis as of 20060908 indicates that permissions will only be weak under certain unusual or insecure scenarios

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix gmap_helper_zap_one_page() again A few checks were missing in gmap_helper_zap_one_page(), which can lead to memory corruption in the guest under specific circumstances. Add the missing checks.

In the Linux kernel, the following vulnerability has been resolved: gve: defer interrupt enabling until NAPI registration Currently, interrupts are automatically enabled immediately upon request. This allows interrupt to fire before the associated NAPI context is fully initialized and cause failures like below: [ 0.946369] Call Trace: [ 0.946369] <IRQ> [ 0.946369] __napi_poll+0x2a/0x1e0 [ 0.946369] net_rx_action+0x2f9/0x3f0 [ 0.946369] handle_softirqs+0xd6/0x2c0 [ 0.946369] ? handle_edge_irq+0xc1/0x1b0 [ 0.946369] __irq_exit_rcu+0xc3/0xe0 [ 0.946369] common_interrupt+0x81/0xa0 [ 0.946369] </IRQ> [ 0.946369] <TASK> [ 0.946369] asm_common_interrupt+0x22/0x40 [ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10 Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto enablement and explicitly enable the interrupt in NAPI initialization path (and disable it during NAPI teardown). This ensures that interrupt lifecycle is strictly coupled with readiness of NAPI context.

In the Linux kernel, the following vulnerability has been resolved: igbvf: fix double free in `igbvf_probe` In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential memory corruption in __update_iostat_latency() Add iotype sanity check to avoid potential memory corruption. This is to fix the compile error below: fs/f2fs/iostat.c:231 __update_iostat_latency() error: buffer overflow 'io_lat->peak_lat[type]' 3 <= 3 vim +228 fs/f2fs/iostat.c 211 static inline void __update_iostat_latency(struct bio_iostat_ctx *iostat_ctx, 212 enum iostat_lat_type type) 213 { 214 unsigned long ts_diff; 215 unsigned int page_type = iostat_ctx->type; 216 struct f2fs_sb_info *sbi = iostat_ctx->sbi; 217 struct iostat_lat_info *io_lat = sbi->iostat_io_lat; 218 unsigned long flags; 219 220 if (!sbi->iostat_enable) 221 return; 222 223 ts_diff = jiffies - iostat_ctx->submit_ts; 224 if (page_type >= META_FLUSH) ^^^^^^^^^^ 225 page_type = META; 226 227 spin_lock_irqsave(&sbi->iostat_lat_lock, flags); @228 io_lat->sum_lat[type][page_type] += ts_diff; ^^^^^^^^^ Mixup between META_FLUSH and NR_PAGE_TYPE leads to memory corruption.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: always drop device refcount in ib_del_sub_device_and_put() Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add support to add/delete a sub IB device through netlink") grabs a reference using ib_device_get_by_index() before calling ib_del_sub_device_and_put(), we need to drop that reference before returning -EOPNOTSUPP error.

The SQLDriverConnect() function in unixODBC before 2.2.14p2 have a possible buffer overflow condition when specifying a large value for SAVEFILE parameter in the connection string.

In __f2fs_setxattr in fs/f2fs/xattr.c in the Linux kernel through 5.15.11, there is an out-of-bounds memory access when an inode has an invalid last xattr entry.

In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix infinite recursion in fib6_dump_done(). syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue. ---truncated---

In the Linux kernel, the following vulnerability has been resolved: isdn: cpai: check ctr->cnr to avoid array index out of bound The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479]

In the Linux kernel, the following vulnerability has been resolved: bpf: Protect against int overflow for stack access size This patch re-introduces protection against the size of access to stack memory being negative; the access size can appear negative as a result of overflowing its signed int representation. This should not actually happen, as there are other protections along the way, but we should protect against it anyway. One code path was missing such protections (fixed in the previous patch in the series), causing out-of-bounds array accesses in check_stack_range_initialized(). This patch causes the verification of a program with such a non-sensical access size to fail. This check used to exist in a more indirect way, but was inadvertendly removed in a833a17aeac7.

artswrapper in aRts, when running setuid root on Linux 2.6.0 or later versions, does not check the return value of the setuid function call, which allows local users to gain root privileges by causing setuid to fail, which prevents artsd from dropping privileges.

In the Linux kernel before 2.6.34, a range check issue in drivers/gpu/drm/radeon/atombios.c could cause an off by one (buffer overflow) problem. NOTE: At least one Linux maintainer believes that this CVE is incorrectly assigned and should be rejected because the value is hard coded and are not user-controllable where it is used