In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Fix possible deadlocks in core system-wide PM code It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false.

In the Linux kernel, the following vulnerability has been resolved: team: prevent adding a device which is already a team device lower Prevent adding a device which is already a team device lower, e.g. adding veth0 if vlan1 was already added and veth0 is a lower of vlan1. This is not useful in practice and can lead to recursive locking: $ ip link add veth0 type veth peer name veth1 $ ip link set veth0 up $ ip link set veth1 up $ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1 $ ip link add team0 type team $ ip link set veth0.1 down $ ip link set veth0.1 master team0 team0: Port device veth0.1 added $ ip link set veth0 down $ ip link set veth0 master team0 ============================================ WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted -------------------------------------------- ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(team->team_lock_key); lock(team->team_lock_key); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/7684: stack backtrace: CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_deadlock_bug.cold (kernel/locking/lockdep.c:3040) __lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226) ? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548) lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2)) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? lock_acquire (kernel/locking/lockdep.c:5822) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) __mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? fib_sync_up (net/ipv4/fib_semantics.c:2167) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) __dev_notify_flags (net/core/dev.c:8993) ? __dev_change_flags (net/core/dev.c:8975) dev_change_flags (net/core/dev.c:9027) vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470) ? br_device_event (net/bridge/br.c:143) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) dev_open (net/core/dev.c:1519 net/core/dev.c:1505) team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977) ? __pfx_team_add_slave (drivers/net/team/team_core.c:1972) do_set_master (net/core/rtnetlink.c:2917) do_setlink.isra.0 (net/core/rtnetlink.c:3117)

In the Linux kernel, the following vulnerability has been resolved: rhashtable: Fix potential deadlock by moving schedule_work outside lock Move the hash table growth check and work scheduling outside the rht lock to prevent a possible circular locking dependency. The original implementation could trigger a lockdep warning due to a potential deadlock scenario involving nested locks between rhashtable bucket, rq lock, and dsq lock. By relocating the growth check and work scheduling after releasing the rth lock, we break this potential deadlock chain. This change expands the flexibility of rhashtable by removing restrictive locking that previously limited its use in scheduler and workqueue contexts. Import to say that this calls rht_grow_above_75(), which reads from struct rhashtable without holding the lock, if this is a problem, we can move the check to the lock, and schedule the workqueue after the lock. Modified so that atomic_inc is also moved outside of the bucket lock along with the growth above 75% check.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix possible deadlocks This fixes possible deadlocks like the following caused by hci_cmd_sync_dequeue causing the destroy function to run: INFO: task kworker/u19:0:143 blocked for more than 120 seconds. Tainted: G W O 6.8.0-2024-03-19-intel-next-iLS-24ww14 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u19:0 state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> __schedule+0x374/0xaf0 schedule+0x3c/0xf0 schedule_preempt_disabled+0x1c/0x30 __mutex_lock.constprop.0+0x3ef/0x7a0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3c/0x50 mgmt_set_connectable_complete+0xa4/0x150 [bluetooth] ? kfree+0x211/0x2a0 hci_cmd_sync_dequeue+0xae/0x130 [bluetooth] ? __pfx_cmd_complete_rsp+0x10/0x10 [bluetooth] cmd_complete_rsp+0x26/0x80 [bluetooth] mgmt_pending_foreach+0x4d/0x70 [bluetooth] __mgmt_power_off+0x8d/0x180 [bluetooth] ? _raw_spin_unlock_irq+0x23/0x40 hci_dev_close_sync+0x445/0x5b0 [bluetooth] hci_set_powered_sync+0x149/0x250 [bluetooth] set_powered_sync+0x24/0x60 [bluetooth] hci_cmd_sync_work+0x90/0x150 [bluetooth] process_one_work+0x13e/0x300 worker_thread+0x2f7/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x107/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3d/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT is enabled. [ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs [ 35.118569] preempt_count: 1, expected: 0 [ 35.118571] RCU nest depth: 1, expected: 1 [ 35.118577] INFO: lockdep is turned off. ... [ 35.118647] __might_resched+0x433/0x5b0 [ 35.118677] rt_spin_lock+0xc3/0x290 [ 35.118700] ___slab_alloc+0x72/0xc40 [ 35.118723] __kmalloc_noprof+0x13f/0x4e0 [ 35.118732] bpf_map_kzalloc+0xe5/0x220 [ 35.118740] bpf_selem_alloc+0x1d2/0x7b0 [ 35.118755] bpf_local_storage_update+0x2fa/0x8b0 [ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0 [ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66 [ 35.118795] bpf_trace_run3+0x222/0x400 [ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20 [ 35.118824] trace_inet_sock_set_state+0x112/0x130 [ 35.118830] inet_sk_state_store+0x41/0x90 [ 35.118836] tcp_set_state+0x3b3/0x640 There is no need to adjust the gfp_flags passing to the bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL. The verifier has ensured GFP_KERNEL is passed only in sleepable context. It has been an old issue since the first introduction of the bpf_local_storage ~5 years ago, so this patch targets the bpf-next. bpf_mem_alloc is needed to solve it, so the Fixes tag is set to the commit when bpf_mem_alloc was first used in the bpf_local_storage.

In the Linux kernel, the following vulnerability has been resolved: can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock The following 3 locks would race against each other, causing the deadlock situation in the Syzbot bug report: - j1939_socks_lock - active_session_list_lock - sk_session_queue_lock A reasonable fix is to change j1939_socks_lock to an rwlock, since in the rare situations where a write lock is required for the linked list that j1939_socks_lock is protecting, the code does not attempt to acquire any more locks. This would break the circular lock dependency, where, for example, the current thread already locks j1939_socks_lock and attempts to acquire sk_session_queue_lock, and at the same time, another thread attempts to acquire j1939_socks_lock while holding sk_session_queue_lock. NOTE: This patch along does not fix the unregister_netdevice bug reported by Syzbot; instead, it solves a deadlock situation to prepare for one or more further patches to actually fix the Syzbot bug, which appears to be a reference counting problem within the j1939 codebase. [mkl: remove unrelated newline change]

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range When running an SVA case, the following soft lockup is triggered: -------------------------------------------------------------------- watchdog: BUG: soft lockup - CPU#244 stuck for 26s! pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50 sp : ffff8000d83ef290 x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000 x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000 x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0 x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0 x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 __arm_smmu_tlb_inv_range+0x118/0x254 arm_smmu_tlb_inv_range_asid+0x6c/0x130 arm_smmu_mm_invalidate_range+0xa0/0xa4 __mmu_notifier_invalidate_range_end+0x88/0x120 unmap_vmas+0x194/0x1e0 unmap_region+0xb4/0x144 do_mas_align_munmap+0x290/0x490 do_mas_munmap+0xbc/0x124 __vm_munmap+0xa8/0x19c __arm64_sys_munmap+0x28/0x50 invoke_syscall+0x78/0x11c el0_svc_common.constprop.0+0x58/0x1c0 do_el0_svc+0x34/0x60 el0_svc+0x2c/0xd4 el0t_64_sync_handler+0x114/0x140 el0t_64_sync+0x1a4/0x1a8 -------------------------------------------------------------------- Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains. The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called typically next to MMU tlb flush function, e.g. tlb_flush_mmu_tlbonly { tlb_flush { __flush_tlb_range { // check MAX_TLBI_OPS } } mmu_notifier_arch_invalidate_secondary_tlbs { arm_smmu_mm_arch_invalidate_secondary_tlbs { // does not check MAX_TLBI_OPS } } } Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an SVA case SMMU uses the CPU page table, so it makes sense to align with the tlbflush code. Then, replace per-page TLBI commands with a single per-asid TLBI command, if the request size hits this threshold.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: Avoid touching renamed directory if parent does not change The VFS will not be locking moved directory if its parent does not change. Change ocfs2 rename code to avoid touching renamed directory if its parent does not change as without locking that can corrupt the filesystem.

In the Linux kernel, the following vulnerability has been resolved: drm: Don't unref the same fb many times by mistake due to deadlock handling If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit.

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock during uvc_probe If uvc_probe() fails, it can end up calling uvc_status_unregister() before uvc_status_init() is called. Fix this by checking if dev->status is NULL or not in uvc_status_unregister().

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix deadlock when freeing cgroup storage The following commit bc235cdb423a ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]") first introduced deadlock prevention for fentry/fexit programs attaching on bpf_task_storage helpers. That commit also employed the logic in map free path in its v6 version. Later bpf_cgrp_storage was first introduced in c4bcfb38a95e ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs") which faces the same issue as bpf_task_storage, instead of its busy counter, NULL was passed to bpf_local_storage_map_free() which opened a window to cause deadlock: <TASK> (acquiring local_storage->lock) _raw_spin_lock_irqsave+0x3d/0x50 bpf_local_storage_update+0xd1/0x460 bpf_cgrp_storage_get+0x109/0x130 bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170 ? __bpf_prog_enter_recur+0x16/0x80 bpf_trampoline_6442485186+0x43/0xa4 cgroup_storage_ptr+0x9/0x20 (holding local_storage->lock) bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160 bpf_selem_unlink_storage+0x6f/0x110 bpf_local_storage_map_free+0xa2/0x110 bpf_map_free_deferred+0x5b/0x90 process_one_work+0x17c/0x390 worker_thread+0x251/0x360 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Progs: - A: SEC("fentry/cgroup_storage_ptr") - cgid (BPF_MAP_TYPE_HASH) Record the id of the cgroup the current task belonging to in this hash map, using the address of the cgroup as the map key. - cgrpa (BPF_MAP_TYPE_CGRP_STORAGE) If current task is a kworker, lookup the above hash map using function parameter @owner as the key to get its corresponding cgroup id which is then used to get a trusted pointer to the cgroup through bpf_cgroup_from_id(). This trusted pointer can then be passed to bpf_cgrp_storage_get() to finally trigger the deadlock issue. - B: SEC("tp_btf/sys_enter") - cgrpb (BPF_MAP_TYPE_CGRP_STORAGE) The only purpose of this prog is to fill Prog A's hash map by calling bpf_cgrp_storage_get() for as many userspace tasks as possible. Steps to reproduce: - Run A; - while (true) { Run B; Destroy B; } Fix this issue by passing its busy counter to the free procedure so it can be properly incremented before storage/smap locking.

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix deadlock in concurrent rename whiteout and inode writeback Following hung tasks: [ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132 [ 77.028820] Call Trace: [ 77.029027] schedule+0x8c/0x1b0 [ 77.029067] mutex_lock+0x50/0x60 [ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs] [ 77.029117] __writeback_single_inode+0x43c/0x570 [ 77.029128] writeback_sb_inodes+0x259/0x740 [ 77.029148] wb_writeback+0x107/0x4d0 [ 77.029163] wb_workfn+0x162/0x7b0 [ 92.390442] task:aa state:D stack: 0 pid: 1506 [ 92.390448] Call Trace: [ 92.390458] schedule+0x8c/0x1b0 [ 92.390461] wb_wait_for_completion+0x82/0xd0 [ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110 [ 92.390472] writeback_inodes_sb_nr+0x14/0x20 [ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs] [ 92.390503] do_rename.cold+0x7f/0x187 [ubifs] [ 92.390549] ubifs_rename+0x8b/0x180 [ubifs] [ 92.390571] vfs_rename+0xdb2/0x1170 [ 92.390580] do_renameat2+0x554/0x770 , are caused by concurrent rename whiteout and inode writeback processes: rename_whiteout(Thread 1) wb_workfn(Thread2) ubifs_rename do_rename lock_4_inodes (Hold ui_mutex) ubifs_budget_space make_free_space shrink_liability __writeback_inodes_sb_nr bdi_split_work_to_wbs (Queue new wb work) wb_do_writeback(wb work) __writeback_single_inode ubifs_write_inode LOCK(ui_mutex) ↑ wb_wait_for_completion (Wait wb work) <-- deadlock! Reproducer (Detail program in [Link]): 1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT) 2. Consume out of space before kernel(mdelay) doing budget for whiteout Fix it by doing whiteout space budget before locking ubifs inodes. BTW, it also fixes wrong goto tag 'out_release' in whiteout budget error handling path(It should at least recover dir i_size and unlock 4 ubifs inodes).

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen.

In the Linux kernel, the following vulnerability has been resolved: nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert After commit 5b78ed24e8ec ("mm/pagemap: add mmap_assert_locked() annotations to find_vma*()"), the call to get_user_pages() will trigger the mmap assert. static inline void mmap_assert_locked(struct mm_struct *mm) { lockdep_assert_held(&mm->mmap_lock); VM_BUG_ON_MM(!rwsem_is_locked(&mm->mmap_lock), mm); } [ 62.521410] kernel BUG at include/linux/mmap_lock.h:156! ........................................................... [ 62.538938] RIP: 0010:find_vma+0x32/0x80 ........................................................... [ 62.605889] Call Trace: [ 62.608502] <TASK> [ 62.610956] ? lock_timer_base+0x61/0x80 [ 62.614106] find_extend_vma+0x19/0x80 [ 62.617195] __get_user_pages+0x9b/0x6a0 [ 62.620356] __gup_longterm_locked+0x42d/0x450 [ 62.623721] ? finish_wait+0x41/0x80 [ 62.626748] ? __kmalloc+0x178/0x2f0 [ 62.629768] ne_set_user_memory_region_ioctl.isra.0+0x225/0x6a0 [nitro_enclaves] [ 62.635776] ne_enclave_ioctl+0x1cf/0x6d7 [nitro_enclaves] [ 62.639541] __x64_sys_ioctl+0x82/0xb0 [ 62.642620] do_syscall_64+0x3b/0x90 [ 62.645642] entry_SYSCALL_64_after_hwframe+0x44/0xae Use get_user_pages_unlocked() when setting the enclave memory regions. That's a similar pattern as mmap_read_lock() used together with get_user_pages().

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it.

In the Linux kernel, the following vulnerability has been resolved: iio: adis16475: fix deadlock on frequency set With commit 39c024b51b560 ("iio: adis16475: improve sync scale mode handling"), two deadlocks were introduced: 1) The call to 'adis_write_reg_16()' was not changed to it's unlocked version. 2) The lock was not being released on the success path of the function. This change fixes both these issues.

In the Linux kernel, the following vulnerability has been resolved: net: vlan: don't propagate flags on open With the device instance lock, there is now a possibility of a deadlock: [ 1.211455] ============================================ [ 1.211571] WARNING: possible recursive locking detected [ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted [ 1.211823] -------------------------------------------- [ 1.211936] ip/184 is trying to acquire lock: [ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0 [ 1.212207] [ 1.212207] but task is already holding lock: [ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.212487] [ 1.212487] other info that might help us debug this: [ 1.212626] Possible unsafe locking scenario: [ 1.212626] [ 1.212751] CPU0 [ 1.212815] ---- [ 1.212871] lock(&dev->lock); [ 1.212944] lock(&dev->lock); [ 1.213016] [ 1.213016] *** DEADLOCK *** [ 1.213016] [ 1.213143] May be due to missing lock nesting notation [ 1.213143] [ 1.213294] 3 locks held by ip/184: [ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0 [ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0 [ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.213895] [ 1.213895] stack backtrace: [ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 [ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 1.213994] Call Trace: [ 1.213995] <TASK> [ 1.213996] dump_stack_lvl+0x8e/0xd0 [ 1.214000] print_deadlock_bug+0x28b/0x2a0 [ 1.214020] lock_acquire+0xea/0x2a0 [ 1.214027] __mutex_lock+0xbf/0xd40 [ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI [ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev [ 1.214042] __dev_open+0x145/0x270 [ 1.214046] __dev_change_flags+0xb0/0x1e0 [ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev [ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info [ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0 [ 1.214058] notifier_call_chain+0x78/0x120 [ 1.214062] netif_open+0x6d/0x90 [ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0 [ 1.214066] bond_enslave+0x64c/0x1230 [ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0 [ 1.214077] do_setlink+0x516/0x13b0 [ 1.214094] rtnl_newlink+0xaba/0xb80 [ 1.214132] rtnetlink_rcv_msg+0x440/0x490 [ 1.214144] netlink_rcv_skb+0xeb/0x120 [ 1.214150] netlink_unicast+0x1f9/0x320 [ 1.214153] netlink_sendmsg+0x346/0x3f0 [ 1.214157] __sock_sendmsg+0x86/0xb0 [ 1.214160] ____sys_sendmsg+0x1c8/0x220 [ 1.214164] ___sys_sendmsg+0x28f/0x2d0 [ 1.214179] __x64_sys_sendmsg+0xef/0x140 [ 1.214184] do_syscall_64+0xec/0x1d0 [ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 1.214191] RIP: 0033:0x7f2d1b4a7e56 Device setup: netdevsim0 (down) ^ ^ bond netdevsim1.100@netdevsim1 allmulticast=on (down) When we enslave the lower device (netdevsim0) which has a vlan, we propagate vlan's allmuti/promisc flags during ndo_open. This causes (re)locking on of the real_dev. Propagate allmulti/promisc on flags change, not on the open. There is a slight semantics change that vlans that are down now propagate the flags, but this seems unlikely to result in the real issues. Reproducer: echo 0 1 > /sys/bus/netdevsim/new_device dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*) dev=$(echo $dev_path | rev | cut -d/ -f1 | rev) ip link set dev $dev name netdevsim0 ip link set dev netdevsim0 up ip link add link netdevsim0 name netdevsim0.100 type vlan id 100 ip link set dev netdevsim0.100 allm ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix management registrations locking The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists.

In the Linux kernel, the following vulnerability has been resolved: powerpc/qspinlock: Fix deadlock in MCS queue If an interrupt occurs in queued_spin_lock_slowpath() after we increment qnodesp->count and before node->lock is initialized, another CPU might see stale lock values in get_tail_qnode(). If the stale lock value happens to match the lock on that CPU, then we write to the "next" pointer of the wrong qnode. This causes a deadlock as the former CPU, once it becomes the head of the MCS queue, will spin indefinitely until it's "next" pointer is set by its successor in the queue. Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in occasional lockups similar to the following: $ stress-ng --all 128 --vm-bytes 80% --aggressive \ --maximize --oomable --verify --syslog \ --metrics --times --timeout 5m watchdog: CPU 15 Hard LOCKUP ...... NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 Call Trace: 0xc000002cfffa3bf0 (unreliable) _raw_spin_lock+0x6c/0x90 raw_spin_rq_lock_nested.part.135+0x4c/0xd0 sched_ttwu_pending+0x60/0x1f0 __flush_smp_call_function_queue+0x1dc/0x670 smp_ipi_demux_relaxed+0xa4/0x100 xive_muxed_ipi_action+0x20/0x40 __handle_irq_event_percpu+0x80/0x240 handle_irq_event_percpu+0x2c/0x80 handle_percpu_irq+0x84/0xd0 generic_handle_irq+0x54/0x80 __do_irq+0xac/0x210 __do_IRQ+0x74/0xd0 0x0 do_IRQ+0x8c/0x170 hardware_interrupt_common_virt+0x29c/0x2a0 --- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490 ...... NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490 LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90 --- interrupt: 500 0xc0000029c1a41d00 (unreliable) _raw_spin_lock+0x6c/0x90 futex_wake+0x100/0x260 do_futex+0x21c/0x2a0 sys_futex+0x98/0x270 system_call_exception+0x14c/0x2f0 system_call_vectored_common+0x15c/0x2ec The following code flow illustrates how the deadlock occurs. For the sake of brevity, assume that both locks (A and B) are contended and we call the queued_spin_lock_slowpath() function. CPU0 CPU1 ---- ---- spin_lock_irqsave(A) | spin_unlock_irqrestore(A) | spin_lock(B) | | | ▼ | id = qnodesp->count++; | (Note that nodes[0].lock == A) | | | ▼ | Interrupt | (happens before "nodes[0].lock = B") | | | ▼ | spin_lock_irqsave(A) | | | ▼ | id = qnodesp->count++ | nodes[1].lock = A | | | ▼ | Tail of MCS queue | | spin_lock_irqsave(A) ▼ | Head of MCS queue ▼ | CPU0 is previous tail ▼ | Spin indefinitely ▼ (until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0) | ▼ prev == &qnodes[CPU0].nodes[0] (as qnodes ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case

In the Linux kernel, the following vulnerability has been resolved: net: systemport: Add global locking for descriptor lifecycle The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Fix a deadlock in the error handler The following deadlock has been observed on a test setup: - All tags allocated - The SCSI error handler calls ufshcd_eh_host_reset_handler() - ufshcd_eh_host_reset_handler() queues work that calls ufshcd_err_handler() - ufshcd_err_handler() locks up as follows: Workqueue: ufs_eh_wq_0 ufshcd_err_handler.cfi_jt Call trace: __switch_to+0x298/0x5d8 __schedule+0x6cc/0xa94 schedule+0x12c/0x298 blk_mq_get_tag+0x210/0x480 __blk_mq_alloc_request+0x1c8/0x284 blk_get_request+0x74/0x134 ufshcd_exec_dev_cmd+0x68/0x640 ufshcd_verify_dev_init+0x68/0x35c ufshcd_probe_hba+0x12c/0x1cb8 ufshcd_host_reset_and_restore+0x88/0x254 ufshcd_reset_and_restore+0xd0/0x354 ufshcd_err_handler+0x408/0xc58 process_one_work+0x24c/0x66c worker_thread+0x3e8/0xa4c kthread+0x150/0x1b4 ret_from_fork+0x10/0x30 Fix this lockup by making ufshcd_exec_dev_cmd() allocate a reserved request.

In the Linux kernel, the following vulnerability has been resolved: mtd: require write permissions for locking and badblock ioctls MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require write permission. Depending on the hardware MEMLOCK might even be write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK is always write-once. MEMSETBADBLOCK modifies the bad block table.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix soft lockup during fsstress Below traces are observed during fsstress and system got hung. [ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s!

In the Linux kernel, the following vulnerability has been resolved: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 [bigeasy: reword commit message] Tested-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com> [kwilczynski: commit log] [bhelgaas: add back report info from https://lore.kernel.org/lkml/20241218115951.83062-1-ryotkkr98@gmail.com/]

In the Linux kernel, the following vulnerability has been resolved: powerpc/set_memory: Avoid spinlock recursion in change_page_attr() Commit 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines") included a spin_lock() to change_page_attr() in order to safely perform the three step operations. But then commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses") modify it to use pte_update() and do the operation safely against concurrent access. In the meantime, Maxime reported some spinlock recursion. [ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217 [ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0 [ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523 [ 15.373350] Workqueue: events do_free_init [ 15.377615] Call Trace: [ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable) [ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4 [ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0 [ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8 [ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94 [ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134 [ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8 [ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c [ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8 [ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94 [ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8 [ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8 [ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210 [ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c Remove the read / modify / write sequence to make the operation atomic and remove the spin_lock() in change_page_attr(). To do the operation atomically, we can't use pte modification helpers anymore. Because all platforms have different combination of bits, it is not easy to use those bits directly. But all have the _PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare two sets to know which bits are set or cleared. For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you know which bit gets cleared and which bit get set when changing exec permission.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix deadlock in __mptcp_push_pending() __mptcp_push_pending() may call mptcp_flush_join_list() with subflow socket lock held. If such call hits mptcp_sockopt_sync_all() then subsequently __mptcp_sockopt_sync() could try to lock the subflow socket for itself, causing a deadlock. sysrq: Show Blocked State task:ss-server state:D stack: 0 pid: 938 ppid: 1 flags:0x00000000 Call Trace: <TASK> __schedule+0x2d6/0x10c0 ? __mod_memcg_state+0x4d/0x70 ? csum_partial+0xd/0x20 ? _raw_spin_lock_irqsave+0x26/0x50 schedule+0x4e/0xc0 __lock_sock+0x69/0x90 ? do_wait_intr_irq+0xa0/0xa0 __lock_sock_fast+0x35/0x50 mptcp_sockopt_sync_all+0x38/0xc0 __mptcp_push_pending+0x105/0x200 mptcp_sendmsg+0x466/0x490 sock_sendmsg+0x57/0x60 __sys_sendto+0xf0/0x160 ? do_wait_intr_irq+0xa0/0xa0 ? fpregs_restore_userregs+0x12/0xd0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9ba546c2d0 RSP: 002b:00007ffdc3b762d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9ba56c8060 RCX: 00007f9ba546c2d0 RDX: 000000000000077a RSI: 0000000000e5e180 RDI: 0000000000000234 RBP: 0000000000cc57f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ba56c8060 R13: 0000000000b6ba60 R14: 0000000000cc7840 R15: 41d8685b1d7901b8 </TASK> Fix the issue by using __mptcp_flush_join_list() instead of plain mptcp_flush_join_list() inside __mptcp_push_pending(), as suggested by Florian. The sockopt sync will be deferred to the workqueue.

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0 Call Trace: <IRQ> do_raw_spin_lock+0xc0/0xd0 _raw_spin_lock_irqsave+0x95/0xa0 cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci] usb_ep_queue+0x35/0x110 eth_start_xmit+0x220/0x3d0 [u_ether] ncm_tx_timeout+0x34/0x40 [usb_f_ncm] ? ncm_free_inst+0x50/0x50 [usb_f_ncm] __hrtimer_run_queues+0xac/0x440 hrtimer_run_softirq+0x8c/0xb0 __do_softirq+0xcf/0x428 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x61/0x70 irq_exit_rcu+0xc1/0xd0 sysvec_apic_timer_interrupt+0x52/0xb0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:do_raw_spin_trylock+0x18/0x40 RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000 _raw_spin_lock+0x3d/0x70 ? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] ? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci] ? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci] ? irq_thread+0xa0/0x1c0 irq_thread_fn+0x28/0x60 irq_thread+0x105/0x1c0 ? __kthread_parkme+0x42/0x90 ? irq_forced_thread_fn+0x90/0x90 ? wake_threads_waitq+0x30/0x30 ? irq_thread_check_affinity+0xe0/0xe0 kthread+0x12a/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 The root cause of issue is spin_lock/spin_unlock instruction instead spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler function.

In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: Fix sleeping function called from invalid context The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250

In the Linux kernel, the following vulnerability has been resolved: bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46471a to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick f ---truncated---

In the Linux kernel before 4.16.4, a double-locking error in drivers/usb/dwc3/gadget.c may potentially cause a deadlock with f_hid.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix soft lockup during bt pages loop Driver runs a for-loop when allocating bt pages and mapping them with buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated, it may require a considerable loop count. This will lead to soft lockup: watchdog: BUG: soft lockup - CPU#27 stuck for 22s! ... Call trace: hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2] hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2] hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2] alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2] hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2] ib_uverbs_reg_mr+0x118/0x290 watchdog: BUG: soft lockup - CPU#35 stuck for 23s! ... Call trace: hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2] mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2] hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2] alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2] hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2] ib_uverbs_reg_mr+0x120/0x2bc Add a cond_resched() to fix soft lockup during these loops. In order not to affect the allocation performance of normal-size buffer, set the loop count of a 100GB MR as the threshold to call cond_resched().

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix exception exit lock checking for subprogs process_bpf_exit_full() passes check_lock = !curframe to check_resource_leak(), which is false in cases when bpf_throw() is called from a static subprog. This makes check_resource_leak() to skip validation of active_rcu_locks, active_preempt_locks, and active_irq_id on exception exits from subprogs. At runtime bpf_throw() unwinds the stack via ORC without releasing any user-acquired locks, which may cause various issues as the result. Fix by setting check_lock = true for exception exits regardless of curframe, since exceptions bypass all intermediate frame cleanup. Update the error message prefix to "bpf_throw" for exception exits to distinguish them from normal BPF_EXIT. Fix reject_subprog_with_rcu_read_lock test which was previously passing for the wrong reason. Test program returned directly from the subprog call without closing the RCU section, so the error was triggered by the unclosed RCU lock on normal exit, not by bpf_throw. Update __msg annotations for affected tests to match the new "bpf_throw" error prefix. The spin_lock case is not affected because they are already checked [1] at the call site in do_check_insn() before bpf_throw can run. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098

In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu" There are reports that the pagetable walker cache coherency is not a given across the spectrum of SDM845/850 devices, leading to lock-ups and resets. It works fine on some devices (like the Dragonboard 845c, but not so much on the Lenovo Yoga C630). This unfortunately looks like a fluke in firmware development, where likely somewhere in the vast hypervisor stack, a change to accommodate for this was only introduced after the initial software release (which often serves as a baseline for products). Revert the change to avoid additional guesswork around crashes. This reverts commit 6b31a9744b8726c69bb0af290f8475a368a4b805.

In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead() Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock (through crypto_exit_scomp_ops_async()). On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through crypto_scomp_init_tfm()), and then allocates memory. If the allocation results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex. The above dependencies can cause an ABBA deadlock. For example in the following scenario: (1) Task A running on CPU #1: crypto_alloc_acomp_node() Holds scomp_lock Enters reclaim Reads per_cpu_ptr(pool->acomp_ctx, 1) (2) Task A is descheduled (3) CPU #1 goes offline zswap_cpu_comp_dead(CPU #1) Holds per_cpu_ptr(pool->acomp_ctx, 1)) Calls crypto_free_acomp() Waits for scomp_lock (4) Task A running on CPU #2: Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1 DEADLOCK Since there is no requirement to call crypto_free_acomp() with the per-CPU acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is unlocked. Also move the acomp_request_free() and kfree() calls for consistency and to avoid any potential sublte locking dependencies in the future. With this, only setting acomp_ctx fields to NULL occurs with the mutex held. This is similar to how zswap_cpu_comp_prepare() only initializes acomp_ctx fields with the mutex held, after performing all allocations before holding the mutex. Opportunistically, move the NULL check on acomp_ctx so that it takes place before the mutex dereference.

A vulnerability was found in btrfs_alloc_tree_b in fs/btrfs/extent-tree.c in the Linux kernel due to an improper lock operation in btrfs. In this flaw, a user with a local privilege may cause a denial of service (DOS) due to a deadlock problem.

In the Linux kernel, the following vulnerability has been resolved: drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set() Instead of attempting the same mutex twice, lock and unlock it. This bug has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadloop in prepare_compress_overwrite() Jan Prusakowski reported a kernel hang issue as below: When running xfstests on linux-next kernel (6.14.0-rc3, 6.12) I encountered a problem in generic/475 test where fsstress process gets blocked in __f2fs_write_data_pages() and the test hangs. The options I used are: MKFS_OPTIONS -- -O compression -O extra_attr -O project_quota -O quota /dev/vdc MOUNT_OPTIONS -- -o acl,user_xattr -o discard,compress_extension=* /dev/vdc /vdc INFO: task kworker/u8:0:11 blocked for more than 122 seconds. Not tainted 6.14.0-rc3-xfstests-lockdep #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:0 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208160 flags:0x00004000 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: <TASK> __schedule+0x309/0x8e0 schedule+0x3a/0x100 schedule_preempt_disabled+0x15/0x30 __mutex_lock+0x59a/0xdb0 __f2fs_write_data_pages+0x3ac/0x400 do_writepages+0xe8/0x290 __writeback_single_inode+0x5c/0x360 writeback_sb_inodes+0x22f/0x570 wb_writeback+0xb0/0x410 wb_do_writeback+0x47/0x2f0 wb_workfn+0x5a/0x1c0 process_one_work+0x223/0x5b0 worker_thread+0x1d5/0x3c0 kthread+0xfd/0x230 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> The root cause is: once generic/475 starts toload error table to dm device, f2fs_prepare_compress_overwrite() will loop reading compressed cluster pages due to IO error, meanwhile it has held .writepages lock, it can block all other writeback tasks. Let's fix this issue w/ below changes: - add f2fs_handle_page_eio() in prepare_compress_overwrite() to detect IO error. - detect cp_error earler in f2fs_read_multi_pages().

In the Linux kernel, the following vulnerability has been resolved: i2c: npcm: disable interrupt enable bit before devm_request_irq The customer reports that there is a soft lockup issue related to the i2c driver. After checking, the i2c module was doing a tx transfer and the bmc machine reboots in the middle of the i2c transaction, the i2c module keeps the status without being reset. Due to such an i2c module status, the i2c irq handler keeps getting triggered since the i2c irq handler is registered in the kernel booting process after the bmc machine is doing a warm rebooting. The continuous triggering is stopped by the soft lockup watchdog timer. Disable the interrupt enable bit in the i2c module before calling devm_request_irq to fix this issue since the i2c relative status bit is read-only. Here is the soft lockup log. [ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1] [ 28.183351] Modules linked in: [ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1 [ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.208128] pc : __do_softirq+0xb0/0x368 [ 28.212055] lr : __do_softirq+0x70/0x368 [ 28.215972] sp : ffffff8035ebca00 [ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780 [ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0 [ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b [ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff [ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000 [ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2 [ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250 [ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434 [ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198 [ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40 [ 28.290611] Call trace: [ 28.293052] __do_softirq+0xb0/0x368 [ 28.296625] __irq_exit_rcu+0xe0/0x100 [ 28.300374] irq_exit+0x14/0x20 [ 28.303513] handle_domain_irq+0x68/0x90 [ 28.307440] gic_handle_irq+0x78/0xb0 [ 28.311098] call_on_irq_stack+0x20/0x38 [ 28.315019] do_interrupt_handler+0x54/0x5c [ 28.319199] el1_interrupt+0x2c/0x4c [ 28.322777] el1h_64_irq_handler+0x14/0x20 [ 28.326872] el1h_64_irq+0x74/0x78 [ 28.330269] __setup_irq+0x454/0x780 [ 28.333841] request_threaded_irq+0xd0/0x1b4 [ 28.338107] devm_request_threaded_irq+0x84/0x100 [ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0 [ 28.346990] platform_probe+0x6c/0xc4 [ 28.350653] really_probe+0xcc/0x45c [ 28.354227] __driver_probe_device+0x8c/0x160 [ 28.358578] driver_probe_device+0x44/0xe0 [ 28.362670] __driver_attach+0x124/0x1d0 [ 28.366589] bus_for_each_dev+0x7c/0xe0 [ 28.370426] driver_attach+0x28/0x30 [ 28.373997] bus_add_driver+0x124/0x240 [ 28.377830] driver_register+0x7c/0x124 [ 28.381662] __platform_driver_register+0x2c/0x34 [ 28.386362] npcm_i2c_init+0x3c/0x5c [ 28.389937] do_one_initcall+0x74/0x230 [ 28.393768] kernel_init_freeable+0x24c/0x2b4 [ 28.398126] kernel_init+0x28/0x130 [ 28.401614] ret_from_fork+0x10/0x20 [ 28.405189] Kernel panic - not syncing: softlockup: hung tasks [ 28.411011] SMP: stopping secondary CPUs [ 28.414933] Kernel Offset: disabled [ 28.418412] CPU features: 0x00000000,00000802 [ 28.427644] Rebooting in 20 seconds..

In the Linux kernel, the following vulnerability has been resolved: hwpoison, memory_hotplug: lock folio before unmap hwpoisoned folio Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined) add page poison checks in do_migrate_range in order to make offline hwpoisoned page possible by introducing isolate_lru_page and try_to_unmap for hwpoisoned page. However folio lock must be held before calling try_to_unmap. Add it to fix this problem. Warning will be produced if folio is not locked during unmap: ------------[ cut here ]------------ kernel BUG at ./include/linux/swapops.h:400! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 4 UID: 0 PID: 411 Comm: bash Tainted: G W 6.13.0-rc1-00016-g3c434c7ee82a-dirty #41 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0xb08/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0xb08/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c Code: f9407be0 b5fff320 d4210000 17ffff97 (d4210000) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: f_midi: f_midi_complete to call queue_work When using USB MIDI, a lock is attempted to be acquired twice through a re-entrant call to f_midi_transmit, causing a deadlock. Fix it by using queue_work() to schedule the inner f_midi_transmit() via a high priority work queue from the completion handler.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: avoid deadlock on fence release Do scheduler queue fence release processing on a workqueue, rather than in the release function itself. Fixes deadlock issues such as the following: [ 607.400437] ============================================ [ 607.405755] WARNING: possible recursive locking detected [ 607.415500] -------------------------------------------- [ 607.420817] weston:zfq0/24149 is trying to acquire lock: [ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr] [ 607.436728] but task is already holding lock: [ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554 [ 607.451727] other info that might help us debug this: [ 607.458245] Possible unsafe locking scenario: [ 607.464155] CPU0 [ 607.466601] ---- [ 607.469044] lock(reservation_ww_class_mutex); [ 607.473584] lock(reservation_ww_class_mutex); [ 607.478114] *** DEADLOCK ***

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix bug on trap in smb2_lock If lock count is greater than 1, flags could be old value. It should be checked with flags of smb_lock, not flags. It will cause bug-on trap from locks_free_lock in error handling routine.

In the Linux kernel, the following vulnerability has been resolved: clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context The following bug report happened with a PREEMPT_RT kernel: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 get_random_u32+0x4f/0x110 clocksource_verify_choose_cpus+0xab/0x1a0 clocksource_verify_percpu.part.0+0x6b/0x330 clocksource_watchdog_kthread+0x193/0x1a0 It is due to the fact that clocksource_verify_choose_cpus() is invoked with preemption disabled. This function invokes get_random_u32() to obtain random numbers for choosing CPUs. The batched_entropy_32 local lock and/or the base_crng.lock spinlock in driver/char/random.c will be acquired during the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot be acquired in atomic context. Fix this problem by using migrate_disable() to allow smp_processor_id() to be reliably used without introducing atomic context. preempt_disable() is then called after clocksource_verify_choose_cpus() but before the clocksource measurement is being run to avoid introducing unexpected latency.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a deadlock when recovering state on a sillyrenamed file If the file is sillyrenamed, and slated for delete on close, it is possible for a server reboot to triggeer an open reclaim, with can again race with the application call to close(). When that happens, the call to put_nfs_open_context() can trigger a synchronous delegreturn call which deadlocks because it is not marked as privileged. Instead, ensure that the call to nfs4_inode_return_delegation_on_close() catches the delegreturn, and schedules it asynchronously.

In the Linux kernel, the following vulnerability has been resolved: gpio: rcar: Use raw_spinlock to protect register access Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix deadlock on DSI device attach error DSI device attach to DSI host will be done with host device's lock held. Un-registering host in "device attach" error path (ex: probe retry) will result in deadlock with below call trace and non operational DSI display. Startup Call trace: [ 35.043036] rt_mutex_slowlock.constprop.21+0x184/0x1b8 [ 35.043048] mutex_lock_nested+0x7c/0xc8 [ 35.043060] device_del+0x4c/0x3e8 [ 35.043075] device_unregister+0x20/0x40 [ 35.043082] mipi_dsi_remove_device_fn+0x18/0x28 [ 35.043093] device_for_each_child+0x68/0xb0 [ 35.043105] mipi_dsi_host_unregister+0x40/0x90 [ 35.043115] vc4_dsi_host_attach+0xf0/0x120 [vc4] [ 35.043199] mipi_dsi_attach+0x30/0x48 [ 35.043209] tc358762_probe+0x128/0x164 [tc358762] [ 35.043225] mipi_dsi_drv_probe+0x28/0x38 [ 35.043234] really_probe+0xc0/0x318 [ 35.043244] __driver_probe_device+0x80/0xe8 [ 35.043254] driver_probe_device+0xb8/0x118 [ 35.043263] __device_attach_driver+0x98/0xe8 [ 35.043273] bus_for_each_drv+0x84/0xd8 [ 35.043281] __device_attach+0xf0/0x150 [ 35.043290] device_initial_probe+0x1c/0x28 [ 35.043300] bus_probe_device+0xa4/0xb0 [ 35.043308] deferred_probe_work_func+0xa0/0xe0 [ 35.043318] process_one_work+0x254/0x700 [ 35.043330] worker_thread+0x4c/0x448 [ 35.043339] kthread+0x19c/0x1a8 [ 35.043348] ret_from_fork+0x10/0x20 Shutdown Call trace: [ 365.565417] Call trace: [ 365.565423] __switch_to+0x148/0x200 [ 365.565452] __schedule+0x340/0x9c8 [ 365.565467] schedule+0x48/0x110 [ 365.565479] schedule_timeout+0x3b0/0x448 [ 365.565496] wait_for_completion+0xac/0x138 [ 365.565509] __flush_work+0x218/0x4e0 [ 365.565523] flush_work+0x1c/0x28 [ 365.565536] wait_for_device_probe+0x68/0x158 [ 365.565550] device_shutdown+0x24/0x348 [ 365.565561] kernel_restart_prepare+0x40/0x50 [ 365.565578] kernel_restart+0x20/0x70 [ 365.565591] __do_sys_reboot+0x10c/0x220 [ 365.565605] __arm64_sys_reboot+0x2c/0x38 [ 365.565619] invoke_syscall+0x4c/0x110 [ 365.565634] el0_svc_common.constprop.3+0xfc/0x120 [ 365.565648] do_el0_svc+0x2c/0x90 [ 365.565661] el0_svc+0x4c/0xf0 [ 365.565671] el0t_64_sync_handler+0x90/0xb8 [ 365.565682] el0t_64_sync+0x180/0x184

In the Linux kernel, the following vulnerability has been resolved: block: fix queue freeze vs limits lock order in sysfs store methods queue_attr_store() always freezes a device queue before calling the attribute store operation. For attributes that control queue limits, the store operation will also lock the queue limits with a call to queue_limits_start_update(). However, some drivers (e.g. SCSI sd) may need to issue commands to a device to obtain limit values from the hardware with the queue limits locked. This creates a potential ABBA deadlock situation if a user attempts to modify a limit (thus freezing the device queue) while the device driver starts a revalidation of the device queue limits. Avoid such deadlock by not freezing the queue before calling the ->store_limit() method in struct queue_sysfs_entry and instead use the queue_limits_commit_update_frozen helper to freeze the queue after taking the limits lock. This also removes taking the sysfs lock for the store_limit method as it doesn't protect anything here, but creates even more nesting. Hopefully it will go away from the actual sysfs methods entirely soon. (commit log adapted from a similar patch from Damien Le Moal)