In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drivers/amd/pm: fix a use-after-free in kv_parse_power_table When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: Terminating the subsequent process of initialization failure syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1] After PSI initialization fails, the si member is accessed again, resulting in this uaf. After si initialization fails, the subsequent process needs to be exited. [1] BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline] BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059 CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xd9/0x110 mm/kasan/report.c:634 vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_table.c:464 task_work_run+0x14e/0x250 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 __do_sys_exit_group kernel/exit.c:1098 [inline] __se_sys_exit_group kernel/exit.c:1096 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096 x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f871d58d169 Code: Unable to access opcode bytes at 0x7f871d58d13f. RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169 RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0 R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003 R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840 </TASK> Allocated by task 6059: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970 vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423 vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973 dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline] dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537 dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564 dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline] dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246 __fput+0x3ff/0xb70 fs/file_tabl ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a race condition between btf_put() and map_free() When running `./test_progs -j` in my local vm with latest kernel, I once hit a kasan error like below: [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0 [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830 [ 1887.186498] [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G OEL 6.7.0-rc3-00699-g90679706d486-dirty #494 [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred [ 1887.190341] Call Trace: [ 1887.190666] <TASK> [ 1887.190949] dump_stack_lvl+0xac/0xe0 [ 1887.191423] ? nf_tcp_handle_invalid+0x1b0/0x1b0 [ 1887.192019] ? panic+0x3c0/0x3c0 [ 1887.192449] print_report+0x14f/0x720 [ 1887.192930] ? preempt_count_sub+0x1c/0xd0 [ 1887.193459] ? __virt_addr_valid+0xac/0x120 [ 1887.194004] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.194572] kasan_report+0xc3/0x100 [ 1887.195085] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.195668] bpf_rb_root_free+0x1f8/0x2b0 [ 1887.196183] ? __bpf_obj_drop_impl+0xb0/0xb0 [ 1887.196736] ? preempt_count_sub+0x1c/0xd0 [ 1887.197270] ? preempt_count_sub+0x1c/0xd0 [ 1887.197802] ? _raw_spin_unlock+0x1f/0x40 [ 1887.198319] bpf_obj_free_fields+0x1d4/0x260 [ 1887.198883] array_map_free+0x1a3/0x260 [ 1887.199380] bpf_map_free_deferred+0x7b/0xe0 [ 1887.199943] process_scheduled_works+0x3a2/0x6c0 [ 1887.200549] worker_thread+0x633/0x890 [ 1887.201047] ? __kthread_parkme+0xd7/0xf0 [ 1887.201574] ? kthread+0x102/0x1d0 [ 1887.202020] kthread+0x1ab/0x1d0 [ 1887.202447] ? pr_cont_work+0x270/0x270 [ 1887.202954] ? kthread_blkcg+0x50/0x50 [ 1887.203444] ret_from_fork+0x34/0x50 [ 1887.203914] ? kthread_blkcg+0x50/0x50 [ 1887.204397] ret_from_fork_asm+0x11/0x20 [ 1887.204913] </TASK> [ 1887.204913] </TASK> [ 1887.205209] [ 1887.205416] Allocated by task 2197: [ 1887.205881] kasan_set_track+0x3f/0x60 [ 1887.206366] __kasan_kmalloc+0x6e/0x80 [ 1887.206856] __kmalloc+0xac/0x1a0 [ 1887.207293] btf_parse_fields+0xa15/0x1480 [ 1887.207836] btf_parse_struct_metas+0x566/0x670 [ 1887.208387] btf_new_fd+0x294/0x4d0 [ 1887.208851] __sys_bpf+0x4ba/0x600 [ 1887.209292] __x64_sys_bpf+0x41/0x50 [ 1887.209762] do_syscall_64+0x4c/0xf0 [ 1887.210222] entry_SYSCALL_64_after_hwframe+0x63/0x6b [ 1887.210868] [ 1887.211074] Freed by task 36: [ 1887.211460] kasan_set_track+0x3f/0x60 [ 1887.211951] kasan_save_free_info+0x28/0x40 [ 1887.212485] ____kasan_slab_free+0x101/0x180 [ 1887.213027] __kmem_cache_free+0xe4/0x210 [ 1887.213514] btf_free+0x5b/0x130 [ 1887.213918] rcu_core+0x638/0xcc0 [ 1887.214347] __do_softirq+0x114/0x37e The error happens at bpf_rb_root_free+0x1f8/0x2b0: 00000000000034c0 <bpf_rb_root_free>: ; { 34c0: f3 0f 1e fa endbr64 34c4: e8 00 00 00 00 callq 0x34c9 <bpf_rb_root_free+0x9> 34c9: 55 pushq %rbp 34ca: 48 89 e5 movq %rsp, %rbp ... ; if (rec && rec->refcount_off >= 0 && 36aa: 4d 85 ed testq %r13, %r13 36ad: 74 a9 je 0x3658 <bpf_rb_root_free+0x198> 36af: 49 8d 7d 10 leaq 0x10(%r13), %rdi 36b3: e8 00 00 00 00 callq 0x36b8 <bpf_rb_root_free+0x1f8> <==== kasan function 36b8: 45 8b 7d 10 movl 0x10(%r13), %r15d <==== use-after-free load 36bc: 45 85 ff testl %r15d, %r15d 36bf: 78 8c js 0x364d <bpf_rb_root_free+0x18d> So the problem ---truncated---

In the Linux Kernel before versions 4.20.8 and 4.19.21 a use-after-free error in the "sctp_sendmsg()" function (net/sctp/socket.c) when handling SCTP_SENDALL flag can be exploited to corrupt memory.

An integer coercion error was found in the openvswitch kernel module. Given a sufficiently large number of actions, while copying and reserving memory for a new action of a new flow, the reserve_sfa_size() function does not return -EMSGSIZE as expected, potentially leading to an out-of-bounds write access. This flaw allows a local user to crash or potentially escalate their privileges on the system.

st21nfca_connectivity_event_received in drivers/nfc/st21nfca/se.c in the Linux kernel through 5.16.12 has EVT_TRANSACTION buffer overflows because of untrusted length parameters.

In the Linux kernel through 4.20.11, af_alg_release() in crypto/af_alg.c neglects to set a NULL value for a certain structure member, which leads to a use-after-free in sockfs_setattr.

It was discovered that the cls_route filter implementation in the Linux kernel would not remove an old filter from the hashtable before freeing it if its handle had the value 0.

i915_gem_userptr_get_pages in drivers/gpu/drm/i915/i915_gem_userptr.c in the Linux kernel 4.15.0 on Ubuntu 18.04.2 allows local users to cause a denial of service (NULL pointer dereference and BUG) or possibly have unspecified other impact via crafted ioctl calls to /dev/dri/card0.

It was discovered that when exec'ing from a non-leader thread, armed POSIX CPU timers would be left on a list but freed, leading to a use-after-free.

A null pointer dereference flaw was found in the hugetlbfs_fill_super function in the Linux kernel hugetlbfs (HugeTLB pages) functionality. This issue may allow a local user to crash the system or potentially escalate their privileges on the system.

A memory leak flaw was found in the Linux kernel’s io_uring functionality in how a user registers a buffer ring with IORING_REGISTER_PBUF_RING, mmap() it, and then frees it. This flaw allows a local user to crash or potentially escalate their privileges on the system.

net/netfilter/nf_dup_netdev.c in the Linux kernel 5.4 through 5.6.10 allows local users to gain privileges because of a heap out-of-bounds write. This is related to nf_tables_offload.

It was discovered that a nft object or expression could reference a nft set on a different nft table, leading to a use-after-free once that table was deleted.

A use-after-free flaw was found in the Linux Kernel. When a disk is removed, bdi_unregister is called to stop further write-back and waits for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation work after this has completed, which can result in the timer attempting to access the recently freed bdi_writeback.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability where a user can cause an untrusted pointer dereference by executing a driver API. A successful exploit of this vulnerability might lead to denial of service, information disclosure, and data tampering.

In Qt 5.9.x through 5.15.x before 5.15.9 and 6.x before 6.2.4 on Linux and UNIX, QProcess could execute a binary from the current working directory when not found in the PATH.

In the Linux kernel, the following vulnerability has been resolved: spi: Fix use-after-free with devm_spi_alloc_* We can't rely on the contents of the devres list during spi_unregister_controller(), as the list is already torn down at the time we perform devres_find() for devm_spi_release_controller. This causes devices registered with devm_spi_alloc_{master,slave}() to be mistakenly identified as legacy, non-devm managed devices and have their reference counters decremented below 0. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174 [<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98) [<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24) r4:b6700140 [<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40) [<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4) r5:b6700180 r4:b6700100 [<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60) r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10 [<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec) r5:b117ad94 r4:b163dc10 [<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0) r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10 [<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8) Instead, determine the devm allocation state as a flag on the controller which is guaranteed to be stable during cleanup.

In the Linux kernel, the following vulnerability has been resolved: smackfs: restrict bytes count in smk_set_cipso() Oops, I failed to update subject line. From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001 Date: Mon, 12 Apr 2021 22:25:06 +0900 Subject: [PATCH] smackfs: restrict bytes count in smk_set_cipso() Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case.

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login().

In sk_clone_lock of sock.c, there is a possible memory corruption due to type confusion. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-113509306. References: Upstream kernel.

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in gfs2_glock_shrink_scan The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock.

Buffer overflow in i40e driver for Intel(R) Ethernet 700 Series Controllers versions before 7.0 may allow an authenticated user to potentially enable an escalation of privilege via local access.

io_uring use work_flags to determine which identity need to grab from the calling process to make sure it is consistent with the calling process when executing IORING_OP. Some operations are missing some types, which can lead to incorrect reference counts which can then lead to a double free. We recommend upgrading the kernel past commit df3f3bb5059d20ef094d6b2f0256c4bf4127a859

The udl_fb_mmap function in drivers/gpu/drm/udl/udl_fb.c at the Linux kernel version 3.4 and up to and including 4.15 has an integer-overflow vulnerability allowing local users with access to the udldrmfb driver to obtain full read and write permissions on kernel physical pages, resulting in a code execution in kernel space.

In the Linux kernel, the following vulnerability has been resolved: proc/vmcore: fix clearing user buffer by properly using clear_user() To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer.

In the Linux kernel, the following vulnerability has been resolved: media: as102: fix to not free memory after the device is registered in as102_usb_probe() In as102_usb driver, the following race condition occurs: ``` CPU0 CPU1 as102_usb_probe() kzalloc(); // alloc as102_dev_t .... usb_register_dev(); fd = sys_open("/path/to/dev"); // open as102 fd .... usb_deregister_dev(); .... kfree(); // free as102_dev_t .... sys_close(fd); as102_release() // UAF!! as102_usb_release() kfree(); // DFB!! ``` When a USB character device registered with usb_register_dev() is later unregistered (via usb_deregister_dev() or disconnect), the device node is removed so new open() calls fail. However, file descriptors that are already open do not go away immediately: they remain valid until the last reference is dropped and the driver's .release() is invoked. In as102, as102_usb_probe() calls usb_register_dev() and then, on an error path, does usb_deregister_dev() and frees as102_dev_t right away. If userspace raced a successful open() before the deregistration, that open FD will later hit as102_release() --> as102_usb_release() and access or free as102_dev_t again, occur a race to use-after-free and double-free vuln. The fix is to never kfree(as102_dev_t) directly once usb_register_dev() has succeeded. After deregistration, defer freeing memory to .release(). In other words, let release() perform the last kfree when the final open FD is closed.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix RxGK token loading to check bounds rxrpc_preparse_xdr_yfs_rxgk() reads the raw key length and ticket length from the XDR token as u32 values and passes each through round_up(x, 4) before using the rounded value for validation and allocation. When the raw length is >= 0xfffffffd, round_up() wraps to 0, so the bounds check and kzalloc both use 0 while the subsequent memcpy still copies the original ~4 GiB value, producing a heap buffer overflow reachable from an unprivileged add_key() call. Fix this by: (1) Rejecting raw key lengths above AFSTOKEN_GK_KEY_MAX and raw ticket lengths above AFSTOKEN_GK_TOKEN_MAX before rounding, consistent with the caps that the RxKAD path already enforces via AFSTOKEN_RK_TIX_MAX. (2) Sizing the flexible-array allocation from the validated raw key length via struct_size_t() instead of the rounded value. (3) Caching the raw lengths so that the later field assignments and memcpy calls do not re-read from the token, eliminating a class of TOCTOU re-parse. The control path (valid token with lengths within bounds) is unaffected.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: move component registration to unmanaged version q6apm component registers dais dynamically from ASoC toplology, which are allocated using device managed version apis. Allocating both component and dynamic dais using managed version could lead to incorrect free ordering, dai will be freed while component still holding references to it. Fix this issue by moving component to unmanged version so that the dai pointers are only freeded after the component is removed. ================================================================== BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426 Tainted: [W]=WARN Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024 Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] Call trace: show_stack+0x28/0x7c (C) dump_stack_lvl+0x60/0x80 print_report+0x160/0x4b4 kasan_report+0xac/0xfc __asan_report_load8_noabort+0x20/0x34 snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core] devm_component_release+0x30/0x5c [snd_soc_core] devres_release_all+0x13c/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Allocated by task 77: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x44/0x58 __kasan_kmalloc+0xbc/0xdc __kmalloc_node_track_caller_noprof+0x1f4/0x620 devm_kmalloc+0x7c/0x1c8 snd_soc_register_dai+0x50/0x4f0 [snd_soc_core] soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core] snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core] audioreach_tplg_init+0x124/0x1fc [snd_q6apm] q6apm_audio_probe+0x10/0x1c [snd_q6apm] snd_soc_component_probe+0x5c/0x118 [snd_soc_core] soc_probe_component+0x44c/0xaf0 [snd_soc_core] snd_soc_bind_card+0xad0/0x2370 [snd_soc_core] snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core] devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core] x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100] platform_probe+0xc0/0x188 really_probe+0x188/0x804 __driver_probe_device+0x158/0x358 driver_probe_device+0x60/0x190 __device_attach_driver+0x16c/0x2a8 bus_for_each_drv+0x100/0x194 __device_attach+0x174/0x380 device_initial_probe+0x14/0x20 bus_probe_device+0x124/0x154 deferred_probe_work_func+0x140/0x220 process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Freed by task 3426: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 __kasan_save_free_info+0x4c/0x80 __kasan_slab_free+0x78/0xa0 kfree+0x100/0x4a4 devres_release_all+0x144/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20

SQL Server for Linux Containers Elevation of Privilege Vulnerability

NVIDIA NeMo contains a vulnerability in SaveRestoreConnector where a user may cause a path traversal issue via an unsafe .tar file extraction. A successful exploit of this vulnerability may lead to code execution and data tampering.

kernel/bpf/verifier.c in the Linux kernel through 5.15.14 allows local users to gain privileges because of the availability of pointer arithmetic via certain *_OR_NULL pointer types.

Incorrect buffer length handling in the ncp_read_kernel function in fs/ncpfs/ncplib_kernel.c in the Linux kernel through 4.15.11, and in drivers/staging/ncpfs/ncplib_kernel.c in the Linux kernel 4.16-rc through 4.16-rc6, could be exploited by malicious NCPFS servers to crash the kernel or execute code.

In the Linux kernel, the following vulnerability has been resolved: gpib: fix use-after-free in IO ioctl handlers The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor pointer after board->big_gpib_mutex has been released. A concurrent IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during this window, causing a use-after-free. The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly release big_gpib_mutex before calling their handler. wait_ioctl() is called with big_gpib_mutex held, but ibwait() releases it internally when wait_mask is non-zero. In all four cases, the descriptor pointer obtained from handle_to_descriptor() becomes unprotected. Fix this by introducing a kernel-only descriptor_busy reference count in struct gpib_descriptor. Each handler atomically increments descriptor_busy under file_priv->descriptors_mutex before releasing the lock, and decrements it when done. close_dev_ioctl() checks descriptor_busy under the same lock and rejects the close with -EBUSY if the count is non-zero. A reference count rather than a simple flag is necessary because multiple handlers can operate on the same descriptor concurrently (e.g. IBRD and IBWAIT on the same handle from different threads). A separate counter is needed because io_in_progress can be cleared from unprivileged userspace via the IBWAIT ioctl (through general_ibstatus() with set_mask containing CMPL), which would allow an attacker to bypass a check based solely on io_in_progress. The new descriptor_busy counter is only modified by the kernel IO paths. The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex) and the handlers only hold descriptors_mutex briefly during the lookup, so there is no deadlock risk and no impact on IO throughput.

In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for the virt_wifi net devices. However, unregistering a virt_wifi device in netdev_run_todo() can happen together with the device referenced by SET_NETDEV_DEV(). It can result in use-after-free during the ethtool operations performed on a virt_wifi device that is currently being unregistered. Such a net device can have the `dev.parent` field pointing to the freed memory, but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`. Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this: ================================================================== BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0 Read of size 2 at addr ffff88810cfc46f8 by task pm/606 Call Trace: <TASK> dump_stack_lvl+0x4d/0x70 print_report+0x170/0x4f3 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kasan_report+0xda/0x110 ? __pm_runtime_resume+0xe2/0xf0 ? __pm_runtime_resume+0xe2/0xf0 __pm_runtime_resume+0xe2/0xf0 ethnl_ops_begin+0x49/0x270 ethnl_set_features+0x23c/0xab0 ? __pfx_ethnl_set_features+0x10/0x10 ? kvm_sched_clock_read+0x11/0x20 ? local_clock_noinstr+0xf/0xf0 ? local_clock+0x10/0x30 ? kasan_save_track+0x25/0x60 ? __kasan_kmalloc+0x7f/0x90 ? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0 genl_family_rcv_msg_doit+0x1e7/0x2c0 ? __pfx_genl_family_rcv_msg_doit+0x10/0x10 ? __pfx_cred_has_capability.isra.0+0x10/0x10 ? stack_trace_save+0x8e/0xc0 genl_rcv_msg+0x411/0x660 ? __pfx_genl_rcv_msg+0x10/0x10 ? __pfx_ethnl_set_features+0x10/0x10 netlink_rcv_skb+0x121/0x380 ? __pfx_genl_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_down_read+0x10/0x10 genl_rcv+0x23/0x30 netlink_unicast+0x60f/0x830 ? __pfx_netlink_unicast+0x10/0x10 ? __pfx___alloc_skb+0x10/0x10 netlink_sendmsg+0x6ea/0xbc0 ? __pfx_netlink_sendmsg+0x10/0x10 ? __futex_queue+0x10b/0x1f0 ____sys_sendmsg+0x7a2/0x950 ? copy_msghdr_from_user+0x26b/0x430 ? __pfx_____sys_sendmsg+0x10/0x10 ? __pfx_copy_msghdr_from_user+0x10/0x10 ___sys_sendmsg+0xf8/0x180 ? __pfx____sys_sendmsg+0x10/0x10 ? __pfx_futex_wait+0x10/0x10 ? fdget+0x2e4/0x4a0 __sys_sendmsg+0x11f/0x1c0 ? __pfx___sys_sendmsg+0x10/0x10 do_syscall_64+0xe2/0x570 ? exc_page_fault+0x66/0xb0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This fix may be combined with another one in the ethtool subsystem: https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u

In the Linux kernel, the following vulnerability has been resolved: driver core: platform: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix use-after-free on disconnect In usb6fire_chip_abort(), the chip struct is allocated as the card's private data (via snd_card_new with sizeof(struct sfire_chip)). When snd_card_free_when_closed() is called and no file handles are open, the card and embedded chip are freed synchronously. The subsequent chip->card = NULL write then hits freed slab memory. Call trace: usb6fire_chip_abort sound/usb/6fire/chip.c:59 [inline] usb6fire_chip_disconnect+0x348/0x358 sound/usb/6fire/chip.c:182 usb_unbind_interface+0x1a8/0x88c drivers/usb/core/driver.c:458 ... hub_event+0x1a04/0x4518 drivers/usb/core/hub.c:5953 Fix by moving the card lifecycle out of usb6fire_chip_abort() and into usb6fire_chip_disconnect(). The card pointer is saved in a local before any teardown, snd_card_disconnect() is called first to prevent new opens, URBs are aborted while chip is still valid, and snd_card_free_when_closed() is called last so chip is never accessed after the card may be freed.

In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0

In the Linux kernel, the following vulnerability has been resolved: can: raw: fix ro->uniq use-after-free in raw_rcv() raw_release() unregisters raw CAN receive filters via can_rx_unregister(), but receiver deletion is deferred with call_rcu(). This leaves a window where raw_rcv() may still be running in an RCU read-side critical section after raw_release() frees ro->uniq, leading to a use-after-free of the percpu uniq storage. Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific socket destructor. can_rx_unregister() takes an extra reference to the socket and only drops it from the RCU callback, so freeing uniq from sk_destruct ensures the percpu area is not released until the relevant callbacks have drained. [mkl: applied manually]

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd() In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points directly into the mmap'd TX ring buffer shared with userspace. The kernel validates the header via __packet_snd_vnet_parse() but then re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent userspace thread can modify the vnet_hdr fields between validation and use, bypassing all safety checks. The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr to a stack-local variable. All other vnet_hdr consumers in the kernel (tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX path is the only caller of virtio_net_hdr_to_skb() that reads directly from user-controlled shared memory. Fix this by copying vnet_hdr from the mmap'd ring buffer to a stack-local variable before validation and use, consistent with the approach used in packet_snd() and all other callers.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref() After commit 1618aa3c2e01 ("btrfs: simplify return variables in lookup_extent_data_ref()"), the err and ret variables were merged into a single ret variable. However, when btrfs_next_leaf() returns 0 (success), ret is overwritten from -ENOENT to 0. If the first key in the next leaf does not match (different objectid or type), the function returns 0 instead of -ENOENT, making the caller believe the lookup succeeded when it did not. This can lead to operations on the wrong extent tree item, potentially causing extent tree corruption. Fix this by returning -ENOENT directly when the key does not match, instead of relying on the ret variable.

In the Linux kernel, the following vulnerability has been resolved: thermal: core: Address thermal zone removal races with resume Since thermal_zone_pm_complete() and thermal_zone_device_resume() re-initialize the poll_queue delayed work for the given thermal zone, the cancel_delayed_work_sync() in thermal_zone_device_unregister() may miss some already running work items and the thermal zone may be freed prematurely [1]. There are two failing scenarios that both start with running thermal_pm_notify_complete() right before invoking thermal_zone_device_unregister() for one of the thermal zones. In the first scenario, there is a work item already running for the given thermal zone when thermal_pm_notify_complete() calls thermal_zone_pm_complete() for that thermal zone and it continues to run when thermal_zone_device_unregister() starts. Since the poll_queue delayed work has been re-initialized by thermal_pm_notify_complete(), the running work item will be missed by the cancel_delayed_work_sync() in thermal_zone_device_unregister() and if it continues to run past the freeing of the thermal zone object, a use-after-free will occur. In the second scenario, thermal_zone_device_resume() queued up by thermal_pm_notify_complete() runs right after the thermal_zone_exit() called by thermal_zone_device_unregister() has returned. The poll_queue delayed work is re-initialized by it before cancel_delayed_work_sync() is called by thermal_zone_device_unregister(), so it may continue to run after the freeing of the thermal zone object, which also leads to a use-after-free. Address the first failing scenario by ensuring that no thermal work items will be running when thermal_pm_notify_complete() is called. For this purpose, first move the cancel_delayed_work() call from thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent new work from entering the workqueue going forward. Next, switch over to using a dedicated workqueue for thermal events and update the code in thermal_pm_notify() to flush that workqueue after thermal_pm_notify_prepare() has returned which will take care of all leftover thermal work already on the workqueue (that leftover work would do nothing useful anyway because all of the thermal zones have been flagged as suspended). The second failing scenario is addressed by adding a tz->state check to thermal_zone_device_resume() to prevent it from re-initializing the poll_queue delayed work if the thermal zone is going away. Note that the above changes will also facilitate relocating the suspend and resume of thermal zones closer to the suspend and resume of devices, respectively.

An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system.

In the Linux kernel, the following vulnerability has been resolved: mm: blk-cgroup: fix use-after-free in cgwb_release_workfn() cgwb_release_workfn() calls css_put(wb->blkcg_css) and then later accesses wb->blkcg_css again via blkcg_unpin_online(). If css_put() drops the last reference, the blkcg can be freed asynchronously (css_free_rwork_fn -> blkcg_css_free -> kfree) before blkcg_unpin_online() dereferences the pointer to access blkcg->online_pin, resulting in a use-after-free: BUG: KASAN: slab-use-after-free in blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) Write of size 4 at addr ff11000117aa6160 by task kworker/71:1/531 Workqueue: cgwb_release cgwb_release_workfn Call Trace: <TASK> blkcg_unpin_online (./include/linux/instrumented.h:112 ./include/linux/atomic/atomic-instrumented.h:400 ./include/linux/refcount.h:389 ./include/linux/refcount.h:432 ./include/linux/refcount.h:450 block/blk-cgroup.c:1367) cgwb_release_workfn (mm/backing-dev.c:629) process_scheduled_works (kernel/workqueue.c:3278 kernel/workqueue.c:3385) Freed by task 1016: kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6246 mm/slub.c:6561) css_free_rwork_fn (kernel/cgroup/cgroup.c:5542) process_scheduled_works (kernel/workqueue.c:3302 kernel/workqueue.c:3385) ** Stack based on commit 66672af7a095 ("Add linux-next specific files for 20260410") I am seeing this crash sporadically in Meta fleet across multiple kernel versions. A full reproducer is available at: https://github.com/leitao/debug/blob/main/reproducers/repro_blkcg_uaf.sh (The race window is narrow. To make it easily reproducible, inject a msleep(100) between css_put() and blkcg_unpin_online() in cgwb_release_workfn(). With that delay and a KASAN-enabled kernel, the reproducer triggers the splat reliably in less than a second.) Fix this by moving blkcg_unpin_online() before css_put(), so the cgwb's CSS reference keeps the blkcg alive while blkcg_unpin_online() accesses it.