Use After Free vulnerability in Linux Linux kernel kernel on Linux, x86, ARM (bluetooth modules) allows Local Execution of Code. This vulnerability is associated with program files https://gitee.Com/anolis/cloud-kernel/blob/devel-5.10/net/bluetooth/af_bluetooth.C. This issue affects Linux kernel: from v2.6.12-rc2 before v6.8-rc1.

Linux Kernel could allow a local attacker to execute arbitrary code on the system, caused by a concurrency use-after-free flaw in the bad_flp_intr function. By executing a specially-crafted program, an attacker could exploit this vulnerability to execute arbitrary code or cause a denial of service condition on the system.

In Apache HTTP Server 2.4 releases 2.4.17 to 2.4.38, with MPM event, worker or prefork, code executing in less-privileged child processes or threads (including scripts executed by an in-process scripting interpreter) could execute arbitrary code with the privileges of the parent process (usually root) by manipulating the scoreboard. Non-Unix systems are not affected.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: always wait for both firmware loading attempts In 'rtw_wait_firmware_completion()', always wait for both (regular and wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()' has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue 'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually the wowlan one) is still in progress, causing UAF detected by KASAN.

Race condition in the snd_pcm_period_elapsed function in sound/core/pcm_lib.c in the ALSA subsystem in the Linux kernel before 4.7 allows local users to cause a denial of service (use-after-free) or possibly have unspecified other impact via a crafted SNDRV_PCM_TRIGGER_START command.

The blk_rq_map_user_iov function in block/blk-map.c in the Linux kernel before 4.8.14 does not properly restrict the type of iterator, which allows local users to read or write to arbitrary kernel memory locations or cause a denial of service (use-after-free) by leveraging access to a /dev/sg device.

A use-after-free flaw was found in the Linux Kernel. When a disk is removed, bdi_unregister is called to stop further write-back and waits for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation work after this has completed, which can result in the timer attempting to access the recently freed bdi_writeback.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Remove improper idxd_free The call to idxd_free() introduces a duplicate put_device() leading to a reference count underflow: refcount_t: underflow; use-after-free. WARNING: CPU: 15 PID: 4428 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 ... Call Trace: <TASK> idxd_remove+0xe4/0x120 [idxd] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x197/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x74/0xf0 pci_unregister_driver+0x2e/0xb0 idxd_exit_module+0x34/0x7a0 [idxd] __do_sys_delete_module.constprop.0+0x183/0x280 do_syscall_64+0x54/0xd70 entry_SYSCALL_64_after_hwframe+0x76/0x7e The idxd_unregister_devices() which is invoked at the very beginning of idxd_remove(), already takes care of the necessary put_device() through the following call path: idxd_unregister_devices() -> device_unregister() -> put_device() In addition, when CONFIG_DEBUG_KOBJECT_RELEASE is enabled, put_device() may trigger asynchronous cleanup via schedule_delayed_work(). If idxd_free() is called immediately after, it can result in a use-after-free. Remove the improper idxd_free() to avoid both the refcount underflow and potential memory corruption during module unload.

In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free Currently we execute `SET_NETDEV_DEV(dev, &priv->lowerdev->dev)` for the virt_wifi net devices. However, unregistering a virt_wifi device in netdev_run_todo() can happen together with the device referenced by SET_NETDEV_DEV(). It can result in use-after-free during the ethtool operations performed on a virt_wifi device that is currently being unregistered. Such a net device can have the `dev.parent` field pointing to the freed memory, but ethnl_ops_begin() calls `pm_runtime_get_sync(dev->dev.parent)`. Let's remove SET_NETDEV_DEV for virt_wifi to avoid bugs like this: ================================================================== BUG: KASAN: slab-use-after-free in __pm_runtime_resume+0xe2/0xf0 Read of size 2 at addr ffff88810cfc46f8 by task pm/606 Call Trace: <TASK> dump_stack_lvl+0x4d/0x70 print_report+0x170/0x4f3 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kasan_report+0xda/0x110 ? __pm_runtime_resume+0xe2/0xf0 ? __pm_runtime_resume+0xe2/0xf0 __pm_runtime_resume+0xe2/0xf0 ethnl_ops_begin+0x49/0x270 ethnl_set_features+0x23c/0xab0 ? __pfx_ethnl_set_features+0x10/0x10 ? kvm_sched_clock_read+0x11/0x20 ? local_clock_noinstr+0xf/0xf0 ? local_clock+0x10/0x30 ? kasan_save_track+0x25/0x60 ? __kasan_kmalloc+0x7f/0x90 ? genl_family_rcv_msg_attrs_parse.isra.0+0x150/0x2c0 genl_family_rcv_msg_doit+0x1e7/0x2c0 ? __pfx_genl_family_rcv_msg_doit+0x10/0x10 ? __pfx_cred_has_capability.isra.0+0x10/0x10 ? stack_trace_save+0x8e/0xc0 genl_rcv_msg+0x411/0x660 ? __pfx_genl_rcv_msg+0x10/0x10 ? __pfx_ethnl_set_features+0x10/0x10 netlink_rcv_skb+0x121/0x380 ? __pfx_genl_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_down_read+0x10/0x10 genl_rcv+0x23/0x30 netlink_unicast+0x60f/0x830 ? __pfx_netlink_unicast+0x10/0x10 ? __pfx___alloc_skb+0x10/0x10 netlink_sendmsg+0x6ea/0xbc0 ? __pfx_netlink_sendmsg+0x10/0x10 ? __futex_queue+0x10b/0x1f0 ____sys_sendmsg+0x7a2/0x950 ? copy_msghdr_from_user+0x26b/0x430 ? __pfx_____sys_sendmsg+0x10/0x10 ? __pfx_copy_msghdr_from_user+0x10/0x10 ___sys_sendmsg+0xf8/0x180 ? __pfx____sys_sendmsg+0x10/0x10 ? __pfx_futex_wait+0x10/0x10 ? fdget+0x2e4/0x4a0 __sys_sendmsg+0x11f/0x1c0 ? __pfx___sys_sendmsg+0x10/0x10 do_syscall_64+0xe2/0x570 ? exc_page_fault+0x66/0xb0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> This fix may be combined with another one in the ethtool subsystem: https://lore.kernel.org/all/20260322075917.254874-1-alex.popov@linux.com/T/#u

In multiple functions of binder.c, there is a possible memory corruption due to a use after free. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

An issue was discovered in the Linux kernel before 4.14.16. There is a use-after-free in net/sctp/socket.c for a held lock after a peel off, aka CID-a0ff660058b8.

In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use after free in iucv_sock_close() iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv.

A use-after-free vulnerability in the Linux Kernel traffic control index filter (tcindex) can be exploited to achieve local privilege escalation. The tcindex_delete function which does not properly deactivate filters in case of a perfect hashes while deleting the underlying structure which can later lead to double freeing the structure. A local attacker user can use this vulnerability to elevate its privileges to root. We recommend upgrading past commit 8c710f75256bb3cf05ac7b1672c82b92c43f3d28.

A flaw use after free in the Linux kernel Xircom 16-bit PCMCIA (PC-card) Ethernet driver was found.A local user could use this flaw to crash the system or potentially escalate their privileges on the system.

Use After Free vulnerability in Linux kernel traffic control index filter (tcindex) allows Privilege Escalation. The imperfect hash area can be updated while packets are traversing, which will cause a use-after-free when 'tcf_exts_exec()' is called with the destroyed tcf_ext. A local attacker user can use this vulnerability to elevate its privileges to root. This issue affects Linux Kernel: from 4.14 before git commit ee059170b1f7e94e55fa6cadee544e176a6e59c2.

In the Linux kernel, the following vulnerability has been resolved: xen-netback: take a reference to the RX task thread Do this in order to prevent the task from being freed if the thread returns (which can be triggered by the frontend) before the call to kthread_stop done as part of the backend tear down. Not taking the reference will lead to a use-after-free in that scenario. Such reference was taken before but dropped as part of the rework done in 2ac061ce97f4. Reintroduce the reference taking and add a comment this time explaining why it's needed. This is XSA-374 / CVE-2021-28691.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix potential UAF by revoke of fence registers CI has been sporadically reporting the following issue triggered by igt@i915_selftest@live@hangcheck on ADL-P and similar machines: <6> [414.049203] i915: Running intel_hangcheck_live_selftests/igt_reset_evict_fence ... <6> [414.068804] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [414.068812] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <3> [414.070354] Unable to pin Y-tiled fence; err:-4 <3> [414.071282] i915_vma_revoke_fence:301 GEM_BUG_ON(!i915_active_is_idle(&fence->active)) ... <4>[ 609.603992] ------------[ cut here ]------------ <2>[ 609.603995] kernel BUG at drivers/gpu/drm/i915/gt/intel_ggtt_fencing.c:301! <4>[ 609.604003] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <4>[ 609.604006] CPU: 0 PID: 268 Comm: kworker/u64:3 Tainted: G U W 6.9.0-CI_DRM_14785-g1ba62f8cea9c+ #1 <4>[ 609.604008] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 <4>[ 609.604010] Workqueue: i915 __i915_gem_free_work [i915] <4>[ 609.604149] RIP: 0010:i915_vma_revoke_fence+0x187/0x1f0 [i915] ... <4>[ 609.604271] Call Trace: <4>[ 609.604273] <TASK> ... <4>[ 609.604716] __i915_vma_evict+0x2e9/0x550 [i915] <4>[ 609.604852] __i915_vma_unbind+0x7c/0x160 [i915] <4>[ 609.604977] force_unbind+0x24/0xa0 [i915] <4>[ 609.605098] i915_vma_destroy+0x2f/0xa0 [i915] <4>[ 609.605210] __i915_gem_object_pages_fini+0x51/0x2f0 [i915] <4>[ 609.605330] __i915_gem_free_objects.isra.0+0x6a/0xc0 [i915] <4>[ 609.605440] process_scheduled_works+0x351/0x690 ... In the past, there were similar failures reported by CI from other IGT tests, observed on other platforms. Before commit 63baf4f3d587 ("drm/i915/gt: Only wait for GPU activity before unbinding a GGTT fence"), i915_vma_revoke_fence() was waiting for idleness of vma->active via fence_update(). That commit introduced vma->fence->active in order for the fence_update() to be able to wait selectively on that one instead of vma->active since only idleness of fence registers was needed. But then, another commit 0d86ee35097a ("drm/i915/gt: Make fence revocation unequivocal") replaced the call to fence_update() in i915_vma_revoke_fence() with only fence_write(), and also added that GEM_BUG_ON(!i915_active_is_idle(&fence->active)) in front. No justification was provided on why we might then expect idleness of vma->fence->active without first waiting on it. The issue can be potentially caused by a race among revocation of fence registers on one side and sequential execution of signal callbacks invoked on completion of a request that was using them on the other, still processed in parallel to revocation of those fence registers. Fix it by waiting for idleness of vma->fence->active in i915_vma_revoke_fence(). (cherry picked from commit 24bb052d3dd499c5956abad5f7d8e4fd07da7fb1)

A use-after-free flaw was found in the Linux kernel’s Ext4 File System in how a user triggers several file operations simultaneously with the overlay FS usage. This flaw allows a local user to crash or potentially escalate their privileges on the system. Only if patch 9a2544037600 ("ovl: fix use after free in struct ovl_aio_req") not applied yet, the kernel could be affected.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: fix potential use-after-free in ec_bhf_remove static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls.

There is a logic error in io_uring's implementation which can be used to trigger a use-after-free vulnerability leading to privilege escalation. In the io_prep_async_work function the assumption that the last io_grab_identity call cannot return false is not true, and in this case the function will use the init_cred or the previous linked requests identity to do operations instead of using the current identity. This can lead to reference counting issues causing use-after-free. We recommend upgrading past version 5.10.161.

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Use after free in __vmbus_open() The "open_info" variable is added to the &vmbus_connection.chn_msg_list, but the error handling frees "open_info" without removing it from the list. This will result in a use after free. First remove it from the list, and then free it.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy() We need to use list_for_each_entry_safe() iterator because we can not access @catchall after kfree_rcu() call. syzbot reported: BUG: KASAN: use-after-free in nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] BUG: KASAN: use-after-free in nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] BUG: KASAN: use-after-free in nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 Read of size 8 at addr ffff8880716e5b80 by task syz-executor.3/8871 CPU: 1 PID: 8871 Comm: syz-executor.3 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x2ed mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 blocking_notifier_call_chain kernel/notifier.c:318 [inline] blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788 __sock_release+0xcd/0x280 net/socket.c:649 sock_close+0x18/0x20 net/socket.c:1314 __fput+0x286/0x9f0 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f75fbf28adb Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44 RSP: 002b:00007ffd8da7ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f75fbf28adb RDX: 00007f75fc08e828 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 00007f75fc08a960 R08: 0000000000000000 R09: 00007f75fc08e830 R10: 00007ffd8da7ed10 R11: 0000000000000293 R12: 00000000002067c3 R13: 00007ffd8da7ed10 R14: 00007f75fc088f60 R15: 0000000000000032 </TASK> Allocated by task 8886: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] ____kasan_kmalloc mm/kasan/common.c:513 [inline] ____kasan_kmalloc mm/kasan/common.c:472 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:522 kasan_kmalloc include/linux/kasan.h:269 [inline] kmem_cache_alloc_trace+0x1ea/0x4a0 mm/slab.c:3575 kmalloc include/linux/slab.h:590 [inline] nft_setelem_catchall_insert net/netfilter/nf_tables_api.c:5544 [inline] nft_setelem_insert net/netfilter/nf_tables_api.c:5562 [inline] nft_add_set_elem+0x232e/0x2f40 net/netfilter/nf_tables_api.c:5936 nf_tables_newsetelem+0x6ff/0xbb0 net/netfilter/nf_tables_api.c:6032 nfnetlink_rcv_batch+0x1710/0x25f0 net/netfilter/nfnetlink.c:513 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:652 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/ ---truncated---

There is a use-after-free vulnerability in the Linux Kernel which can be exploited to achieve local privilege escalation. To reach the vulnerability kernel configuration flag CONFIG_TLS or CONFIG_XFRM_ESPINTCP has to be configured, but the operation does not require any privilege. There is a use-after-free bug of icsk_ulp_data of a struct inet_connection_sock. When CONFIG_TLS is enabled, user can install a tls context (struct tls_context) on a connected tcp socket. The context is not cleared if this socket is disconnected and reused as a listener. If a new socket is created from the listener, the context is inherited and vulnerable. The setsockopt TCP_ULP operation does not require any privilege. We recommend upgrading past commit 2c02d41d71f90a5168391b6a5f2954112ba2307c

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails When scpi probe fails, at any point, we need to ensure that the scpi_info is not set and will remain NULL until the probe succeeds. If it is not taken care, then it could result use-after-free as the value is exported via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc() but freed when the probe fails.

In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb() We got a syzkaller problem because of aarch64 alignment fault if KFENCE enabled. When the size from user bpf program is an odd number, like 399, 407, etc, it will cause the struct skb_shared_info's unaligned access. As seen below: BUG: KFENCE: use-after-free read in __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 Use-after-free read at 0xffff6254fffac077 (in kfence-#213): __lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline] arch_atomic_add arch/arm64/include/asm/atomic.h:28 [inline] arch_atomic_inc include/linux/atomic-arch-fallback.h:270 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline] __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 skb_clone+0xf4/0x214 net/core/skbuff.c:1481 ____bpf_clone_redirect net/core/filter.c:2433 [inline] bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420 bpf_prog_d3839dd9068ceb51+0x80/0x330 bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline] bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53 bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 kfence-#213: 0xffff6254fffac000-0xffff6254fffac196, size=407, cache=kmalloc-512 allocated by task 15074 on cpu 0 at 1342.585390s: kmalloc include/linux/slab.h:568 [inline] kzalloc include/linux/slab.h:675 [inline] bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191 bpf_prog_test_run_skb+0x11c/0xa7c net/bpf/test_run.c:512 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 __arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381 To fix the problem, we adjust @size so that (@size + @hearoom) is a multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info is aligned to a cache line.

In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() When executing SMP task failed, the smp_execute_task_sg() calls del_timer() to delete "slow_task->timer". However, if the timer handler sas_task_internal_timedout() is running, the del_timer() in smp_execute_task_sg() will not stop it and a UAF will happen. The process is shown below: (thread 1) | (thread 2) smp_execute_task_sg() | sas_task_internal_timedout() ... | del_timer() | ... | ... sas_free_task(task) | kfree(task->slow_task) //FREE| | task->slow_task->... //USE Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure the timer handler have finished before the "task->slow_task" is deallocated.

In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Cleanup CPU timers before freeing them during exec Commit 55e8c8eb2c7b ("posix-cpu-timers: Store a reference to a pid not a task") started looking up tasks by PID when deleting a CPU timer. When a non-leader thread calls execve, it will switch PIDs with the leader process. Then, as it calls exit_itimers, posix_cpu_timer_del cannot find the task because the timer still points out to the old PID. That means that armed timers won't be disarmed, that is, they won't be removed from the timerqueue_list. exit_itimers will still release their memory, and when that list is later processed, it leads to a use-after-free. Clean up the timers from the de-threaded task before freeing them. This prevents a reported use-after-free.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq() can free bfqq first, and then call bic_set_bfqq(), which will cause uaf. Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when handling missing device in read_one_chunk Store the error code before freeing the extent_map. Though it's reference counted structure, in that function it's the first and last allocation so this would lead to a potential use-after-free. The error can happen eg. when chunk is stored on a missing device and the degraded mount option is missing. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721

In the Linux kernel, the following vulnerability has been resolved: dm cache: Fix UAF in destroy() Dm_cache also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in destroy().

In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens.

In the Linux kernel, the following vulnerability has been resolved: ath9k: fix use-after-free in ath9k_hif_usb_rx_cb Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_handle->drv_priv initialization at the end of the ath9k_htc_probe_device() and add helper macro to make all *_STAT_* macros NULL safe, since syzbot has reported related NULL deref in that macros [1]

In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer.

In the Linux kernel, the following vulnerability has been resolved: writeback: avoid use-after-free after removing device When a disk is removed, bdi_unregister gets called to stop further writeback and wait for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation dwork after this has completed, which can result in the timer attempting to access the just freed bdi_writeback. Fix this by checking if the bdi_writeback is alive, similar to when scheduling writeback work. Since this requires wb->work_lock, and wb_inode_writeback_end() may get called from interrupt, switch wb->work_lock to an irqsafe lock.

In the Linux kernel, the following vulnerability has been resolved: KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive. Not checking the active flag during refresh is particularly egregious, as KVM can end up with a valid, inactive cache, which can lead to a variety of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing an mmu_notifier invalidation due to the cache not being on the list of gfns to invalidate. Note, "active" needs to be set if and only if the cache is on the list of caches, i.e. is reachable via mmu_notifier events. If a relevant mmu_notifier event occurs while the cache is "active" but not on the list, KVM will not acquire the cache's lock and so will not serailize the mmu_notifier event with active users and/or kvm_gpc_refresh(). A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND can be exploited to trigger the bug. 1. Deactivate shinfo cache: kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO kvm_gpc_deactivate kvm_gpc_unmap gpc->valid = false gpc->khva = NULL gpc->active = false Result: active = false, valid = false 2. Cause cache refresh: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast kvm_gpc_check return -EWOULDBLOCK because !gpc->valid kvm_xen_set_evtchn_fast return -EWOULDBLOCK kvm_gpc_refresh hva_to_pfn_retry gpc->valid = true gpc->khva = not NULL Result: active = false, valid = true 3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl KVM_XEN_ATTR_TYPE_SHARED_INFO: kvm_arch_vm_ioctl case KVM_XEN_HVM_EVTCHN_SEND kvm_xen_hvm_evtchn_send kvm_xen_set_evtchn kvm_xen_set_evtchn_fast read_lock gpc->lock kvm_xen_hvm_set_attr case KVM_XEN_ATTR_TYPE_SHARED_INFO mutex_lock kvm->lock kvm_xen_shared_info_init kvm_gpc_activate gpc->khva = NULL kvm_gpc_check [ Check passes because gpc->valid is still true, even though gpc->khva is already NULL. ] shinfo = gpc->khva pending_bits = shinfo->evtchn_pending CRASH: test_and_set_bit(..., pending_bits)

In the Linux kernel, the following vulnerability has been resolved: ip6mr: fix UAF issue in ip6mr_sk_done() when addrconf_init_net() failed If the initialization fails in calling addrconf_init_net(), devconf_all is the pointer that has been released. Then ip6mr_sk_done() is called to release the net, accessing devconf->mc_forwarding directly causes invalid pointer access. The process is as follows: setup_net() ops_init() addrconf_init_net() all = kmemdup(...) ---> alloc "all" ... net->ipv6.devconf_all = all; __addrconf_sysctl_register() ---> failed ... kfree(all); ---> ipv6.devconf_all invalid ... ops_exit_list() ... ip6mr_sk_done() devconf = net->ipv6.devconf_all; //devconf is invalid pointer if (!devconf || !atomic_read(&devconf->mc_forwarding)) The following is the Call Trace information: BUG: KASAN: use-after-free in ip6mr_sk_done+0x112/0x3a0 Read of size 4 at addr ffff888075508e88 by task ip/14554 Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 kasan_check_range+0x35/0x1b0 ip6mr_sk_done+0x112/0x3a0 rawv6_close+0x48/0x70 inet_release+0x109/0x230 inet6_release+0x4c/0x70 sock_release+0x87/0x1b0 igmp6_net_exit+0x6b/0x170 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f7963322547 </TASK> Allocated by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc_node_track_caller+0x4a/0xb0 kmemdup+0x28/0x60 addrconf_init_net+0x1be/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 14554: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 addrconf_init_net+0x623/0x840 ops_init+0xa5/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: USB: gadget: Fix use-after-free Read in usb_udc_uevent() The syzbot fuzzer found a race between uevent callbacks and gadget driver unregistration that can cause a use-after-free bug: --------------------------------------------------------------- BUG: KASAN: use-after-free in usb_udc_uevent+0x11f/0x130 drivers/usb/gadget/udc/core.c:1732 Read of size 8 at addr ffff888078ce2050 by task udevd/2968 CPU: 1 PID: 2968 Comm: udevd Not tainted 5.19.0-rc4-next-20220628-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/29/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x719 mm/kasan/report.c:433 kasan_report+0xbe/0x1f0 mm/kasan/report.c:495 usb_udc_uevent+0x11f/0x130 drivers/usb/gadget/udc/core.c:1732 dev_uevent+0x290/0x770 drivers/base/core.c:2424 --------------------------------------------------------------- The bug occurs because usb_udc_uevent() dereferences udc->driver but does so without acquiring the udc_lock mutex, which protects this field. If the gadget driver is unbound from the udc concurrently with uevent processing, the driver structure may be accessed after it has been deallocated. To prevent the race, we make sure that the routine holds the mutex around the racing accesses.

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix use-after-free during unregister In the following code within firmware_upload_unregister(), the call to device_unregister() could result in the dev_release function freeing the fw_upload_priv structure before it is dereferenced for the call to module_put(). This bug was found by the kernel test robot using CONFIG_KASAN while running the firmware selftests. device_unregister(&fw_sysfs->dev); module_put(fw_upload_priv->module); The problem is fixed by copying fw_upload_priv->module to a local variable for use when calling device_unregister().

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Avoid use-after-free on suspend/resume hctx->user_data is set to vq in virtblk_init_hctx(). However, vq is freed on suspend and reallocated on resume. So, hctx->user_data is invalid after resume, and it will cause use-after-free accessing which will result in the kernel crash something like below: [ 22.428391] Call Trace: [ 22.428899] <TASK> [ 22.429339] virtqueue_add_split+0x3eb/0x620 [ 22.430035] ? __blk_mq_alloc_requests+0x17f/0x2d0 [ 22.430789] ? kvm_clock_get_cycles+0x14/0x30 [ 22.431496] virtqueue_add_sgs+0xad/0xd0 [ 22.432108] virtblk_add_req+0xe8/0x150 [ 22.432692] virtio_queue_rqs+0xeb/0x210 [ 22.433330] blk_mq_flush_plug_list+0x1b8/0x280 [ 22.434059] __blk_flush_plug+0xe1/0x140 [ 22.434853] blk_finish_plug+0x20/0x40 [ 22.435512] read_pages+0x20a/0x2e0 [ 22.436063] ? folio_add_lru+0x62/0xa0 [ 22.436652] page_cache_ra_unbounded+0x112/0x160 [ 22.437365] filemap_get_pages+0xe1/0x5b0 [ 22.437964] ? context_to_sid+0x70/0x100 [ 22.438580] ? sidtab_context_to_sid+0x32/0x400 [ 22.439979] filemap_read+0xcd/0x3d0 [ 22.440917] xfs_file_buffered_read+0x4a/0xc0 [ 22.441984] xfs_file_read_iter+0x65/0xd0 [ 22.442970] __kernel_read+0x160/0x2e0 [ 22.443921] bprm_execve+0x21b/0x640 [ 22.444809] do_execveat_common.isra.0+0x1a8/0x220 [ 22.446008] __x64_sys_execve+0x2d/0x40 [ 22.446920] do_syscall_64+0x37/0x90 [ 22.447773] entry_SYSCALL_64_after_hwframe+0x63/0xcd This patch fixes this issue by getting vq from vblk, and removes virtblk_init_hctx().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)

In the Linux kernel, the following vulnerability has been resolved: spi: tegra20-slink: fix UAF in tegra_slink_remove() After calling spi_unregister_master(), the refcount of master will be decrease to 0, and it will be freed in spi_controller_release(), the device data also will be freed, so it will lead a UAF when using 'tspi'. To fix this, get the master before unregister and put it when finish using it.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix UAF in ieee80211_scan_rx() ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done().

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential use-after-free in jbd2_fc_wait_bufs In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count which may lead to use-after-free. So judge buffer if uptodate before put buffer head reference count.