In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix dummy res NULL ptr deref bug Check the bo->resource value before accessing the resource mem_type. v2: Fix commit description unwrapped warning <log snip> [ 40.191227][ T184] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI [ 40.192995][ T184] KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] [ 40.194411][ T184] CPU: 1 PID: 184 Comm: systemd-udevd Not tainted 5.19.0-rc4-00721-gb297c22b7070 #1 [ 40.196063][ T184] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 [ 40.199605][ T184] RIP: 0010:ttm_bo_validate+0x1b3/0x240 [ttm] [ 40.200754][ T184] Code: e8 72 c5 ff ff 83 f8 b8 74 d4 85 c0 75 54 49 8b 9e 58 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 3c 03 7e 44 8b 53 10 31 c0 85 d2 0f 85 58 [ 40.203685][ T184] RSP: 0018:ffffc900006df0c8 EFLAGS: 00010202 [ 40.204630][ T184] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1102f4bb71b [ 40.205864][ T184] RDX: 0000000000000002 RSI: ffffc900006df208 RDI: 0000000000000010 [ 40.207102][ T184] RBP: 1ffff920000dbe1a R08: ffffc900006df208 R09: 0000000000000000 [ 40.208394][ T184] R10: ffff88817a5f0000 R11: 0000000000000001 R12: ffffc900006df110 [ 40.209692][ T184] R13: ffffc900006df0f0 R14: ffff88817a5db800 R15: ffffc900006df208 [ 40.210862][ T184] FS: 00007f6b1d16e8c0(0000) GS:ffff88839d700000(0000) knlGS:0000000000000000 [ 40.212250][ T184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.213275][ T184] CR2: 000055a1001d4ff0 CR3: 00000001700f4000 CR4: 00000000000006e0 [ 40.214469][ T184] Call Trace: [ 40.214974][ T184] <TASK> [ 40.215438][ T184] ? ttm_bo_bounce_temp_buffer+0x140/0x140 [ttm] [ 40.216572][ T184] ? mutex_spin_on_owner+0x240/0x240 [ 40.217456][ T184] ? drm_vma_offset_add+0xaa/0x100 [drm] [ 40.218457][ T184] ttm_bo_init_reserved+0x3d6/0x540 [ttm] [ 40.219410][ T184] ? shmem_get_inode+0x744/0x980 [ 40.220231][ T184] ttm_bo_init_validate+0xb1/0x200 [ttm] [ 40.221172][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.222530][ T184] ? ttm_bo_init_reserved+0x540/0x540 [ttm] [ 40.223643][ T184] ? __do_sys_finit_module+0x11a/0x1c0 [ 40.224654][ T184] ? __shmem_file_setup+0x102/0x280 [ 40.234764][ T184] drm_gem_vram_create+0x305/0x480 [drm_vram_helper] [ 40.235766][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.236846][ T184] ? __kasan_slab_free+0x108/0x180 [ 40.237650][ T184] drm_gem_vram_fill_create_dumb+0x134/0x340 [drm_vram_helper] [ 40.238864][ T184] ? local_pci_probe+0xdf/0x180 [ 40.239674][ T184] ? drmm_vram_helper_init+0x400/0x400 [drm_vram_helper] [ 40.240826][ T184] drm_client_framebuffer_create+0x19c/0x400 [drm] [ 40.241955][ T184] ? drm_client_buffer_delete+0x200/0x200 [drm] [ 40.243001][ T184] ? drm_client_pick_crtcs+0x554/0xb80 [drm] [ 40.244030][ T184] drm_fb_helper_generic_probe+0x23f/0x940 [drm_kms_helper] [ 40.245226][ T184] ? __cond_resched+0x1c/0xc0 [ 40.245987][ T184] ? drm_fb_helper_memory_range_to_clip+0x180/0x180 [drm_kms_helper] [ 40.247316][ T184] ? mutex_unlock+0x80/0x100 [ 40.248005][ T184] ? __mutex_unlock_slowpath+0x2c0/0x2c0 [ 40.249083][ T184] drm_fb_helper_single_fb_probe+0x907/0xf00 [drm_kms_helper] [ 40.250314][ T184] ? drm_fb_helper_check_var+0x1180/0x1180 [drm_kms_helper] [ 40.251540][ T184] ? __cond_resched+0x1c/0xc0 [ 40.252321][ T184] ? mutex_lock+0x9f/0x100 [ 40.253062][ T184] __drm_fb_helper_initial_config_and_unlock+0xb9/0x2c0 [drm_kms_helper] [ 40.254394][ T184] drm_fbdev_client_hotplug+0x56f/0x840 [drm_kms_helper] [ 40.255477][ T184] drm_fbdev_generic_setup+0x165/0x3c0 [drm_kms_helper] [ 40.256607][ T184] bochs_pci_probe+0x6b7/0x900 [bochs] [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: fix potential 32-bit overflow when accessing ARRAY map element If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer problem in free_mr_init() Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL pointer. It should be init mutex_init() first before use the lock. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __mutex_lock.constprop.0+0xd0/0x5c0 __mutex_lock_slowpath+0x1c/0x2c mutex_lock+0x44/0x50 free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2] hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2] hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2] ib_dereg_mr_user+0x54/0x124 uverbs_free_mr+0x24/0x30 destroy_hw_idr_uobject+0x38/0x74 uverbs_destroy_uobject+0x48/0x1c4 uobj_destroy+0x74/0xcc ib_uverbs_cmd_verbs+0x368/0xbb0 ib_uverbs_ioctl+0xec/0x1a4 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x190 do_el0_svc+0x30/0x90 el0_svc+0x2c/0xb4 el0t_64_sync_handler+0x1a4/0x1b0 el0t_64_sync+0x19c/0x1a0

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: net: bgmac: Fix a BUG triggered by wrong bytes_compl On one of our machines we got: kernel BUG at lib/dynamic_queue_limits.c:27! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G W O 4.14.275-rt132 #1 Hardware name: BRCM XGS iProc task: ee3415c0 task.stack: ee32a000 PC is at dql_completed+0x168/0x178 LR is at bgmac_poll+0x18c/0x6d8 pc : [<c03b9430>] lr : [<c04b5a18>] psr: 800a0313 sp : ee32be14 ip : 000005ea fp : 00000bd4 r10: ee558500 r9 : c0116298 r8 : 00000002 r7 : 00000000 r6 : ef128810 r5 : 01993267 r4 : 01993851 r3 : ee558000 r2 : 000070e1 r1 : 00000bd4 r0 : ee52c180 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 12c5387d Table: 8e88c04a DAC: 00000051 Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210) Stack: (0xee32be14 to 0xee32c000) be00: ee558520 ee52c100 ef128810 be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040 be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040 be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98 bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8 bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000 bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520 bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900 bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28 bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70 bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000 bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8) [<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494) [<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c) [<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98) [<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98) [<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0) [<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158) [<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24) Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7) The issue seems similar to commit 90b3b339364c ("net: hisilicon: Fix a BUG trigered by wrong bytes_compl") and potentially introduced by commit b38c83dd0866 ("bgmac: simplify tx ring index handling"). If there is an RX interrupt between setting ring->end and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free() can miscalculate the queue size while called from bgmac_poll(). The machine which triggered the BUG runs a v4.14 RT kernel - but the issue seems present in mainline too.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: avoid clearing hw interrupts if hw_intr is null during drm uninit If edp modeset init is failed due to panel being not ready and probe defers during drm bind, avoid clearing irqs and dereference hw_intr when hw_intr is null. BUG: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: dpu_core_irq_uninstall+0x50/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c msm_drm_bind+0x580/0x5fc try_to_bring_up_master+0x168/0x1c0 __component_add+0xb4/0x178 component_add+0x1c/0x28 dp_display_probe+0x38c/0x400 platform_probe+0xb0/0xd0 really_probe+0xcc/0x2c8 __driver_probe_device+0xbc/0xe8 driver_probe_device+0x48/0xf0 __device_attach_driver+0xa0/0xc8 bus_for_each_drv+0x8c/0xd8 __device_attach+0xc4/0x150 device_initial_probe+0x1c/0x28 Changes in V2: - Update commit message and coreect fixes tag. Patchwork: https://patchwork.freedesktop.org/patch/484430/

In the Linux kernel, the following vulnerability has been resolved: mctp: Fix an error handling path in mctp_init() If mctp_neigh_init() return error, the routes resources should be released in the error handling path. Otherwise some resources leak.

In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Panic on bad configs that #VE on "private" memory access All normal kernel memory is "TDX private memory". This includes everything from kernel stacks to kernel text. Handling exceptions on arbitrary accesses to kernel memory is essentially impossible because they can happen in horribly nasty places like kernel entry/exit. But, TDX hardware can theoretically _deliver_ a virtualization exception (#VE) on any access to private memory. But, it's not as bad as it sounds. TDX can be configured to never deliver these exceptions on private memory with a "TD attribute" called ATTR_SEPT_VE_DISABLE. The guest has no way to *set* this attribute, but it can check it. Ensure ATTR_SEPT_VE_DISABLE is set in early boot. panic() if it is unset. There is no sane way for Linux to run with this attribute clear so a panic() is appropriate. There's small window during boot before the check where kernel has an early #VE handler. But the handler is only for port I/O and will also panic() as soon as it sees any other #VE, such as a one generated by a private memory access. [ dhansen: Rewrite changelog and rebase on new tdx_parse_tdinfo(). Add Kirill's tested-by because I made changes since he wrote this. ]

In the Linux kernel, the following vulnerability has been resolved: mISDN: fix misuse of put_device() in mISDN_register_device() We should not release reference by put_device() before calling device_initialize().

In the Linux kernel, the following vulnerability has been resolved: net: macvlan: fix memory leaks of macvlan_common_newlink kmemleak reports memory leaks in macvlan_common_newlink, as follows: ip link add link eth0 name .. type macvlan mode source macaddr add <MAC-ADDR> kmemleak reports: unreferenced object 0xffff8880109bb140 (size 64): comm "ip", pid 284, jiffies 4294986150 (age 430.108s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z..... 80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk backtrace: [<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300 [<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0 [<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170 [<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0 [<ffffffff81b6797e>] macvlan_newlink+0xe/0x20 [<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50 [<ffffffff81d98278>] rtnl_newlink+0x48/0x70 ... In the scenario where the macvlan mode is configured as 'source', macvlan_changelink_sources() will be execured to reconfigure list of remote source mac addresses, at the same time, if register_netdevice() return an error, the resource generated by macvlan_changelink_sources() is not cleaned up. Using this patch, in the case of an error, it will execute macvlan_flush_sources() to ensure that the resource is cleaned up.

In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: fix rumble worker null pointer deref We can dereference a null pointer trying to queue work to a destroyed workqueue. If the device is disconnected, nintendo_hid_remove is called, in which the rumble_queue is destroyed. Avoid using that queue to defer rumble work once the controller state is set to JOYCON_CTLR_STATE_REMOVED. This eliminates the null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D bits instead of mapping the PTE into kernel address space. The VM_PFNMAP path is broken as it assumes that vm_pgoff is the base pfn of the mapped VMA range, which is conceptually wrong as vm_pgoff is the offset relative to the file and has nothing to do with the pfn. The horrific hack worked for the original use case (backing guest memory with /dev/mem), but leads to accessing "random" pfns for pretty much any other VM_PFNMAP case.

In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: fix error handling code in ufx_usb_probe The current error handling code in ufx_usb_probe have many unmatching issues, e.g., missing ufx_free_usb_list, destroy_modedb label should only include framebuffer_release, fb_dealloc_cmap only matches fb_alloc_cmap. My local syzkaller reports a memory leak bug: memory leak in ufx_usb_probe BUG: memory leak unreferenced object 0xffff88802f879580 (size 128): comm "kworker/0:7", pid 17416, jiffies 4295067474 (age 46.710s) hex dump (first 32 bytes): 80 21 7c 2e 80 88 ff ff 18 d0 d0 0c 80 88 ff ff .!|............. 00 d0 d0 0c 80 88 ff ff e0 ff ff ff 0f 00 00 00 ................ backtrace: [<ffffffff814c99a0>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1045 [<ffffffff824d219c>] kmalloc include/linux/slab.h:553 [inline] [<ffffffff824d219c>] kzalloc include/linux/slab.h:689 [inline] [<ffffffff824d219c>] ufx_alloc_urb_list drivers/video/fbdev/smscufx.c:1873 [inline] [<ffffffff824d219c>] ufx_usb_probe+0x11c/0x15a0 drivers/video/fbdev/smscufx.c:1655 [<ffffffff82d17927>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline] [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639 [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778 [<ffffffff827132da>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:808 [<ffffffff82713c27>] __device_attach_driver+0xf7/0x150 drivers/base/dd.c:936 [<ffffffff82710137>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff827136b5>] __device_attach+0x105/0x2d0 drivers/base/dd.c:1008 [<ffffffff82711d36>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8270e242>] device_add+0x642/0xdc0 drivers/base/core.c:3517 [<ffffffff82d14d5f>] usb_set_configuration+0x8ef/0xb80 drivers/usb/core/message.c:2170 [<ffffffff82d2576c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 [<ffffffff82d16ffc>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293 [<ffffffff82712f0d>] call_driver_probe drivers/base/dd.c:560 [inline] [<ffffffff82712f0d>] really_probe+0x12d/0x390 drivers/base/dd.c:639 [<ffffffff8271322f>] __driver_probe_device+0xbf/0x140 drivers/base/dd.c:778 Fix this bug by rewriting the error handling code in ufx_usb_probe.

In the Linux kernel, the following vulnerability has been resolved: iavf: Fix adminq error handling iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]

In the Linux kernel, the following vulnerability has been resolved: net: dsa: don't leak tagger-owned storage on switch driver unbind In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned storage for private and shared data"), we had a call to tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at tree teardown time. There were problems with connecting to a switch tree as a whole, so this got reworked to connecting to individual switches within the tree. In this process, tag_ops->disconnect(ds) was made to be called only from switch.c (cross-chip notifiers emitted as a result of dynamic tag proto changes), but the normal driver teardown code path wasn't replaced with anything. Solve this problem by adding a function that does the opposite of dsa_switch_setup_tag_protocol(), which is called from the equivalent spot in dsa_switch_teardown(). The positioning here also ensures that we won't have any use-after-free in tagging protocol (*rcv) ops, since the teardown sequence is as follows: dsa_tree_teardown -> dsa_tree_teardown_master -> dsa_master_teardown -> unsets master->dsa_ptr, making no further packets match the ETH_P_XDSA packet type handler -> dsa_tree_teardown_ports -> dsa_port_teardown -> dsa_slave_destroy -> unregisters DSA net devices, there is even a synchronize_net() in unregister_netdevice_many() -> dsa_tree_teardown_switches -> dsa_switch_teardown -> dsa_switch_teardown_tag_protocol -> finally frees the tagger-owned storage

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_send_one(): fix missing CAN header initialization The read access to struct canxl_frame::len inside of a j1939 created skbuff revealed a missing initialization of reserved and later filled elements in struct can_frame. This patch initializes the 8 byte CAN header with zero.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY in this case. This may trigger a call trace in iw_cm. A simple way to trigger this: server: ib_send_lat client: ib_send_lat -R <server_ip> The call trace looks like this: kernel BUG at drivers/infiniband/core/iwcm.c:894! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI <...> Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: <TASK> cm_work_handler+0x1dd/0x370 [iw_cm] process_one_work+0x1e2/0x3b0 worker_thread+0x49/0x2e0 ? rescuer_thread+0x370/0x370 kthread+0xe5/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: VMCI: Use threaded irqs instead of tasklets The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Prevent RSB underflow before vmenter On VMX, there are some balanced returns between the time the guest's SPEC_CTRL value is written, and the vmenter. Balanced returns (matched by a preceding call) are usually ok, but it's at least theoretically possible an NMI with a deep call stack could empty the RSB before one of the returns. For maximum paranoia, don't allow *any* returns (balanced or otherwise) between the SPEC_CTRL write and the vmenter. [ bp: Fix 32-bit build. ]

In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix null pointer dereference of pointer perfmon In the unlikely event that pointer perfmon is null the WARN_ON return path occurs after the pointer has already been deferenced. Fix this by only dereferencing perfmon after it has been null checked.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix ufshcd_abort_one racing issue When ufshcd_abort_one is racing with the completion ISR, the completed tag of the request's mq_hctx pointer will be set to NULL by ISR. Return success when request is completed by ISR because ufshcd_abort_one does not need to do anything. The racing flow is: Thread A ufshcd_err_handler step 1 ... ufshcd_abort_one ufshcd_try_to_abort_task ufshcd_cmd_inflight(true) step 3 ufshcd_mcq_req_to_hwq blk_mq_unique_tag rq->mq_hctx->queue_num step 5 Thread B ufs_mtk_mcq_intr(cq complete ISR) step 2 scsi_done ... __blk_mq_free_request rq->mq_hctx = NULL; step 4 Below is KE back trace. ufshcd_try_to_abort_task: cmd at tag 41 not pending in the device. ufshcd_try_to_abort_task: cmd at tag=41 is cleared. Aborting tag 41 / CDB 0x28 succeeded Unable to handle kernel NULL pointer dereference at virtual address 0000000000000194 pc : [0xffffffddd7a79bf8] blk_mq_unique_tag+0x8/0x14 lr : [0xffffffddd6155b84] ufshcd_mcq_req_to_hwq+0x1c/0x40 [ufs_mediatek_mod_ise] do_mem_abort+0x58/0x118 el1_abort+0x3c/0x5c el1h_64_sync_handler+0x54/0x90 el1h_64_sync+0x68/0x6c blk_mq_unique_tag+0x8/0x14 ufshcd_err_handler+0xae4/0xfa8 [ufs_mediatek_mod_ise] process_one_work+0x208/0x4fc worker_thread+0x228/0x438 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix memory leak when build ntlmssp negotiate blob failed There is a memory leak when mount cifs: unreferenced object 0xffff888166059600 (size 448): comm "mount.cifs", pid 51391, jiffies 4295596373 (age 330.596s) hex dump (first 32 bytes): fe 53 4d 42 40 00 00 00 00 00 00 00 01 00 82 00 .SMB@........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060609a61>] mempool_alloc+0xe1/0x260 [<00000000adfa6c63>] cifs_small_buf_get+0x24/0x60 [<00000000ebb404c7>] __smb2_plain_req_init+0x32/0x460 [<00000000bcf875b4>] SMB2_sess_alloc_buffer+0xa4/0x3f0 [<00000000753a2987>] SMB2_sess_auth_rawntlmssp_negotiate+0xf5/0x480 [<00000000f0c1f4f9>] SMB2_sess_setup+0x253/0x410 [<00000000a8b83303>] cifs_setup_session+0x18f/0x4c0 [<00000000854bd16d>] cifs_get_smb_ses+0xae7/0x13c0 [<000000006cbc43d9>] mount_get_conns+0x7a/0x730 [<000000005922d816>] cifs_mount+0x103/0xd10 [<00000000e33def3b>] cifs_smb3_do_mount+0x1dd/0xc90 [<0000000078034979>] smb3_get_tree+0x1d5/0x300 [<000000004371f980>] vfs_get_tree+0x41/0xf0 [<00000000b670d8a7>] path_mount+0x9b3/0xdd0 [<000000005e839a7d>] __x64_sys_mount+0x190/0x1d0 [<000000009404c3b9>] do_syscall_64+0x35/0x80 When build ntlmssp negotiate blob failed, the session setup request should be freed.

In the Linux kernel, the following vulnerability has been resolved: mtd: maps: Fix refcount leak in of_flash_probe_versatile of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: qca8k: reset cpu port on MTU change It was discovered that the Documentation lacks of a fundamental detail on how to correctly change the MAX_FRAME_SIZE of the switch. In fact if the MAX_FRAME_SIZE is changed while the cpu port is on, the switch panics and cease to send any packet. This cause the mgmt ethernet system to not receive any packet (the slow fallback still works) and makes the device not reachable. To recover from this a switch reset is required. To correctly handle this, turn off the cpu ports before changing the MAX_FRAME_SIZE and turn on again after the value is applied.

In the Linux kernel, the following vulnerability has been resolved: leds: an30259a: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix multipath crash caused by flush request when blktrace is enabled The flush request initialized by blk_kick_flush has NULL bio, and it may be dealt with nvme_end_req during io completion. When blktrace is enabled, nvme_trace_bio_complete with multipath activated trying to access NULL pointer bio from flush request results in the following crash: [ 2517.831677] BUG: kernel NULL pointer dereference, address: 000000000000001a [ 2517.835213] #PF: supervisor read access in kernel mode [ 2517.838724] #PF: error_code(0x0000) - not-present page [ 2517.842222] PGD 7b2d51067 P4D 0 [ 2517.845684] Oops: 0000 [#1] SMP NOPTI [ 2517.849125] CPU: 2 PID: 732 Comm: kworker/2:1H Kdump: loaded Tainted: G S 5.15.67-0.cl9.x86_64 #1 [ 2517.852723] Hardware name: XFUSION 2288H V6/BC13MBSBC, BIOS 1.13 07/27/2022 [ 2517.856358] Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp] [ 2517.859993] RIP: 0010:blk_add_trace_bio_complete+0x6/0x30 [ 2517.863628] Code: 1f 44 00 00 48 8b 46 08 31 c9 ba 04 00 10 00 48 8b 80 50 03 00 00 48 8b 78 50 e9 e5 fe ff ff 0f 1f 44 00 00 41 54 49 89 f4 55 <0f> b6 7a 1a 48 89 d5 e8 3e 1c 2b 00 48 89 ee 4c 89 e7 5d 89 c1 ba [ 2517.871269] RSP: 0018:ff7f6a008d9dbcd0 EFLAGS: 00010286 [ 2517.875081] RAX: ff3d5b4be00b1d50 RBX: 0000000002040002 RCX: ff3d5b0a270f2000 [ 2517.878966] RDX: 0000000000000000 RSI: ff3d5b0b021fb9f8 RDI: 0000000000000000 [ 2517.882849] RBP: ff3d5b0b96a6fa00 R08: 0000000000000001 R09: 0000000000000000 [ 2517.886718] R10: 000000000000000c R11: 000000000000000c R12: ff3d5b0b021fb9f8 [ 2517.890575] R13: 0000000002000000 R14: ff3d5b0b021fb1b0 R15: 0000000000000018 [ 2517.894434] FS: 0000000000000000(0000) GS:ff3d5b42bfc80000(0000) knlGS:0000000000000000 [ 2517.898299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2517.902157] CR2: 000000000000001a CR3: 00000004f023e005 CR4: 0000000000771ee0 [ 2517.906053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2517.909930] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2517.913761] PKRU: 55555554 [ 2517.917558] Call Trace: [ 2517.921294] <TASK> [ 2517.924982] nvme_complete_rq+0x1c3/0x1e0 [nvme_core] [ 2517.928715] nvme_tcp_recv_pdu+0x4d7/0x540 [nvme_tcp] [ 2517.932442] nvme_tcp_recv_skb+0x4f/0x240 [nvme_tcp] [ 2517.936137] ? nvme_tcp_recv_pdu+0x540/0x540 [nvme_tcp] [ 2517.939830] tcp_read_sock+0x9c/0x260 [ 2517.943486] nvme_tcp_try_recv+0x65/0xa0 [nvme_tcp] [ 2517.947173] nvme_tcp_io_work+0x64/0x90 [nvme_tcp] [ 2517.950834] process_one_work+0x1e8/0x390 [ 2517.954473] worker_thread+0x53/0x3c0 [ 2517.958069] ? process_one_work+0x390/0x390 [ 2517.961655] kthread+0x10c/0x130 [ 2517.965211] ? set_kthread_struct+0x40/0x40 [ 2517.968760] ret_from_fork+0x1f/0x30 [ 2517.972285] </TASK> To avoid this situation, add a NULL check for req->bio before calling trace_block_bio_complete.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: don't free the IRQ if it was not requested As msm_drm_uninit() is called from the msm_drm_init() error path, additional care should be necessary as not to call the free_irq() for the IRQ that was not requested before (because an error occured earlier than the request_irq() call). This fixed the issue reported with the following backtrace: [ 8.571329] Trying to free already-free IRQ 187 [ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c [ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6 [ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419 [ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) [ 8.641496] Workqueue: events_unbound deferred_probe_work_func [ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.654681] pc : free_irq+0x1e0/0x35c [ 8.658454] lr : free_irq+0x1e0/0x35c [ 8.662228] sp : ffff800008ab3950 [ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700 [ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90 [ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800 [ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff [ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d [ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c [ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb [ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202 [ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000 [ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000 [ 8.739217] Call trace: [ 8.741755] free_irq+0x1e0/0x35c [ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm] [ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm] [ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0 [ 8.760657] __component_add+0xa0/0x170 [ 8.764626] component_add+0x14/0x20 [ 8.768337] dp_display_probe+0x2a4/0x464 [msm] [ 8.773242] platform_probe+0x68/0xe0 [ 8.777043] really_probe.part.0+0x9c/0x28c [ 8.781368] __driver_probe_device+0x98/0x144 [ 8.785871] driver_probe_device+0x40/0x140 [ 8.790191] __device_attach_driver+0xb4/0x120 [ 8.794788] bus_for_each_drv+0x78/0xd0 [ 8.798751] __device_attach+0xdc/0x184 [ 8.802713] device_initial_probe+0x14/0x20 [ 8.807031] bus_probe_device+0x9c/0xa4 [ 8.810991] deferred_probe_work_func+0x88/0xc0 [ 8.815667] process_one_work+0x1d0/0x320 [ 8.819809] worker_thread+0x14c/0x444 [ 8.823688] kthread+0x10c/0x110 [ 8.827036] ret_from_fork+0x10/0x20 Patchwork: https://patchwork.freedesktop.org/patch/485422/

In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them.

In the Linux kernel, the following vulnerability has been resolved: ext4: don't allow journal inode to have encrypt flag Mounting a filesystem whose journal inode has the encrypt flag causes a NULL dereference in fscrypt_limit_io_blocks() when the 'inlinecrypt' mount option is used. The problem is that when jbd2_journal_init_inode() calls bmap(), it eventually finds its way into ext4_iomap_begin(), which calls fscrypt_limit_io_blocks(). fscrypt_limit_io_blocks() requires that if the inode is encrypted, then its encryption key must already be set up. That's not the case here, since the journal inode is never "opened" like a normal file would be. Hence the crash. A reproducer is: mkfs.ext4 -F /dev/vdb debugfs -w /dev/vdb -R "set_inode_field <8> flags 0x80808" mount /dev/vdb /mnt -o inlinecrypt To fix this, make ext4 consider journal inodes with the encrypt flag to be invalid. (Note, maybe other flags should be rejected on the journal inode too. For now, this is just the minimal fix for the above issue.) I've marked this as fixing the commit that introduced the call to fscrypt_limit_io_blocks(), since that's what made an actual crash start being possible. But this fix could be applied to any version of ext4 that supports the encrypt feature.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: sched: sfb: fix null pointer access issue when sfb_init() fails When the default qdisc is sfb, if the qdisc of dev_queue fails to be inited during mqprio_init(), sfb_reset() is invoked to clear resources. In this case, the q->qdisc is NULL, and it will cause gpf issue. The process is as follows: qdisc_create_dflt() sfb_init() tcf_block_get() --->failed, q->qdisc is NULL ... qdisc_put() ... sfb_reset() qdisc_reset(q->qdisc) --->q->qdisc is NULL ops = qdisc->ops The following is the Call Trace information: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:qdisc_reset+0x2b/0x6f0 Call Trace: <TASK> sfb_reset+0x37/0xd0 qdisc_reset+0xed/0x6f0 qdisc_destroy+0x82/0x4c0 qdisc_put+0x9e/0xb0 qdisc_create_dflt+0x2c3/0x4a0 mqprio_init+0xa71/0x1760 qdisc_create+0x3eb/0x1000 tc_modify_qdisc+0x408/0x1720 rtnetlink_rcv_msg+0x38e/0xac0 netlink_rcv_skb+0x12d/0x3a0 netlink_unicast+0x4a2/0x740 netlink_sendmsg+0x826/0xcc0 sock_sendmsg+0xc5/0x100 ____sys_sendmsg+0x583/0x690 ___sys_sendmsg+0xe8/0x160 __sys_sendmsg+0xbf/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f2164122d04 </TASK>

In the Linux kernel, the following vulnerability has been resolved: PNP: fix name memory leak in pnp_alloc_dev() After commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, move dev_set_name() after pnp_add_id() to avoid memory leak.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate BOOT record_size When the NTFS BOOT record_size field < 0, it represents a shift value. However, there is no sanity check on the shift result and the sbi->record_bits calculation through blksize_bits() assumes the size always > 256, which could lead to NPD while mounting a malformed NTFS image. [ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 318.675682] #PF: supervisor read access in kernel mode [ 318.675869] #PF: error_code(0x0000) - not-present page [ 318.676246] PGD 0 P4D 0 [ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5 [ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0 [ 318.685623] Call Trace: [ 318.686607] <TASK> [ 318.686872] ? ntfs_alloc_inode+0x1a/0x60 [ 318.687235] attr_load_runs_vcn+0x2b/0xa0 [ 318.687468] mi_read+0xbb/0x250 [ 318.687576] ntfs_iget5+0x114/0xd90 [ 318.687750] ntfs_fill_super+0x588/0x11b0 [ 318.687953] ? put_ntfs+0x130/0x130 [ 318.688065] ? snprintf+0x49/0x70 [ 318.688164] ? put_ntfs+0x130/0x130 [ 318.688256] get_tree_bdev+0x16a/0x260 [ 318.688407] vfs_get_tree+0x20/0xb0 [ 318.688519] path_mount+0x2dc/0x9b0 [ 318.688877] do_mount+0x74/0x90 [ 318.689142] __x64_sys_mount+0x89/0xd0 [ 318.689636] do_syscall_64+0x3b/0x90 [ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 318.690318] RIP: 0033:0x7fd9e133c48a [ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a [ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0 [ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020 [ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0 [ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff [ 318.693007] </TASK> [ 318.693271] Modules linked in: [ 318.693614] CR2: 0000000000000158 [ 318.694446] ---[ end trace 0000000000000000 ]--- [ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: blk-mq: Fix kmemleak in blk_mq_init_allocated_queue There is a kmemleak caused by modprobe null_blk.ko unreferenced object 0xffff8881acb1f000 (size 1024): comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S...... backtrace: [<000000004a10c249>] kmalloc_node_trace+0x22/0x60 [<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350 [<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0 [<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440 [<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0 [<00000000d10c98c3>] 0xffffffffc450d69d [<00000000b9299f48>] 0xffffffffc4538392 [<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0 [<00000000b389383b>] do_init_module+0x1a4/0x680 [<0000000087cf3542>] load_module+0x6249/0x7110 [<00000000beba61b8>] __do_sys_finit_module+0x140/0x200 [<00000000fdcfff51>] do_syscall_64+0x35/0x80 [<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 That is because q->ma_ops is set to NULL before blk_release_queue is called. blk_mq_init_queue_data blk_mq_init_allocated_queue blk_mq_realloc_hw_ctxs for (i = 0; i < set->nr_hw_queues; i++) { old_hctx = xa_load(&q->hctx_table, i); if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1] if (!old_hctx) break; xa_for_each_start(&q->hctx_table, j, hctx, j) blk_mq_exit_hctx(q, set, hctx, j); [2] if (!q->nr_hw_queues) [3] goto err_hctxs; err_exit: q->mq_ops = NULL; [4] blk_put_queue blk_release_queue if (queue_is_mq(q)) [5] blk_mq_release(q); [1]: blk_mq_alloc_and_init_hctx failed at i != 0. [2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and will be cleaned up in blk_mq_release. [3]: q->nr_hw_queues is 0. [4]: Set q->mq_ops to NULL. [5]: queue_is_mq returns false due to [4]. And blk_mq_release will not be called. The hctxs in q->unused_hctx_list are leaked. To fix it, call blk_release_queue in exception path.

In the Linux kernel, the following vulnerability has been resolved: kunit: executor: Fix a memory leak on failure in kunit_filter_tests It's possible that memory allocation for 'filtered' will fail, but for the copy of the suite to succeed. In this case, the copy could be leaked. Properly free 'copy' in the error case for the allocation of 'filtered' failing. Note that there may also have been a similar issue in kunit_filter_subsuites, before it was removed in "kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites". This was reported by clang-analyzer via the kernel test robot, here: https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/ And by smatch via Dan Carpenter and the kernel test robot: https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/

In the Linux kernel, the following vulnerability has been resolved: siox: fix possible memory leak in siox_device_add() If device_register() returns error in siox_device_add(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and sdevice is freed in siox_device_release(), set it to null in error path.

In the Linux kernel, the following vulnerability has been resolved: wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()` Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user() but it forgets to change the value to be returned that came from simple_write_to_buffer() call. It results in the following warning: warning: variable 'rc' is uninitialized when used here [-Wuninitialized] return rc; ^~ Remove rc variable and just return the passed in length if the memdup_user() succeeds.

In the Linux kernel, the following vulnerability has been resolved: RDMA/qedr: Fix potential memory leak in __qedr_alloc_mr() __qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr" is released while "mr->info.pbl_table" is not released, which will lead to a memory leak. We should release the "mr->info.pbl_table" with qedr_free_pbl() when error occurs to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: macvlan: enforce a consistent minimal mtu macvlan should enforce a minimal mtu of 68, even at link creation. This patch avoids the current behavior (which could lead to crashes in ipv6 stack if the link is brought up) $ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail ! $ ip link sh dev macvlan1 5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff $ ip link set macvlan1 mtu 67 Error: mtu less than device minimum. $ ip link set macvlan1 mtu 68 $ ip link set macvlan1 mtu 8 Error: mtu less than device minimum.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy().

In the Linux kernel, the following vulnerability has been resolved: memory: of: Fix refcount leak bug in of_get_ddr_timings() We should add the of_node_put() when breaking out of for_each_child_of_node() as it will automatically increase and decrease the refcount.

In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() pdesc could be null but still dereference pdesc->name and it will lead to a null pointer access. So we move a null check before dereference.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix possible memory leak in btrfs_get_dev_args_from_path() In btrfs_get_dev_args_from_path(), btrfs_get_bdev_and_sb() can fail if the path is invalid. In this case, btrfs_get_dev_args_from_path() returns directly without freeing args->uuid and args->fsid allocated before, which causes memory leak. To fix these possible leaks, when btrfs_get_bdev_and_sb() fails, btrfs_put_dev_args_from_path() is called to clean up the memory.

In the Linux kernel, the following vulnerability has been resolved: phy: ralink: mt7621-pci: add sentinel to quirks table With mt7621 soc_dev_attr fixed to register the soc as a device, kernel will experience an oops in soc_device_match_attr This quirk test was introduced in the staging driver in commit 9445ccb3714c ("staging: mt7621-pci-phy: add quirks for 'E2' revision using 'soc_device_attribute'"). The staging driver was removed, and later re-added in commit d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY") for kernel 5.11

In the Linux kernel, the following vulnerability has been resolved: ntfs: check overflow when iterating ATTR_RECORDs Kernel iterates over ATTR_RECORDs in mft record in ntfs_attr_find(). Because the ATTR_RECORDs are next to each other, kernel can get the next ATTR_RECORD from end address of current ATTR_RECORD, through current ATTR_RECORD length field. The problem is that during iteration, when kernel calculates the end address of current ATTR_RECORD, kernel may trigger an integer overflow bug in executing `a = (ATTR_RECORD*)((u8*)a + le32_to_cpu(a->length))`. This may wrap, leading to a forever iteration on 32bit systems. This patch solves it by adding some checks on calculating end address of current ATTR_RECORD during iteration.

In the Linux kernel, the following vulnerability has been resolved: ASoC: ti: j721e-evm: Fix refcount leak in j721e_soc_probe_* of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected When we are not connected to a channel, sending channel "switch" announcement doesn't make any sense. The BSS list is empty in that case. This causes the for loop in cfg80211_get_bss() to be bypassed, so the function returns NULL (check line 1424 of net/wireless/scan.c), causing the WARN_ON() in ieee80211_ibss_csa_beacon() to get triggered (check line 500 of net/mac80211/ibss.c), which was consequently reported on the syzkaller dashboard. Thus, check if we have an existing connection before generating the CSA beacon in ieee80211_ibss_finish_csa().

In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix memory leak in prestera_rxtx_switch_init() When prestera_sdma_switch_init() failed, the memory pointed to by sw->rxtx isn't released. Fix it. Only be compiled, not be tested.

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc, mm/kasan: respect gfp mask in kasan_populate_vmalloc() kasan_populate_vmalloc() and its helpers ignore the caller's gfp_mask and always allocate memory using the hardcoded GFP_KERNEL flag. This makes them inconsistent with vmalloc(), which was recently extended to support GFP_NOFS and GFP_NOIO allocations. Page table allocations performed during shadow population also ignore the external gfp_mask. To preserve the intended semantics of GFP_NOFS and GFP_NOIO, wrap the apply_to_page_range() calls into the appropriate memalloc scope. xfs calls vmalloc with GFP_NOFS, so this bug could lead to deadlock. There was a report here https://lkml.kernel.org/r/686ea951.050a0220.385921.0016.GAE@google.com This patch: - Extends kasan_populate_vmalloc() and helpers to take gfp_mask; - Passes gfp_mask down to alloc_pages_bulk() and __get_free_page(); - Enforces GFP_NOFS/NOIO semantics with memalloc_*_save()/restore() around apply_to_page_range(); - Updates vmalloc.c and percpu allocator call sites accordingly.