Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.
The Itel DAB MUX (IDMUX build c041640a) is vulnerable to Authentication Bypass due to improper JWT validation across devices. Attackers can reuse a valid JWT token obtained from one device to authenticate and gain administrative access to any other device running the same firmware, even if the passwords and networks are different. This allows full compromise of affected devices.
The Social Login plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 5.9.0. This is due to insufficient verification on the user being returned by the social login token. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email and the user does not have an already-existing account for the service returning the token.
The Really Simple Security (Free, Pro, and Pro Multisite) plugins for WordPress are vulnerable to authentication bypass in versions 9.0.0 to 9.1.1.1. This is due to improper user check error handling in the two-factor REST API actions with the 'check_login_and_get_user' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, when the "Two-Factor Authentication" setting is enabled (disabled by default).
An authentication bypass in the admin web console of Ivanti CSA before 5.0.3 allows a remote unauthenticated attacker to gain administrative access
Authentication Bypass Using an Alternate Path or Channel vulnerability in miniOrange Security Software Pvt Ltd. OAuth Single Sign On - SSO (OAuth Client) allows Password Recovery Exploitation. This issue affects OAuth Single Sign On - SSO (OAuth Client): from n/a through 38.5.8.
The MultiManager WP – Manage All Your WordPress Sites Easily plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.0.5. This is due to the user impersonation feature inappropriately determining the current user via user-supplied input. This makes it possible for unauthenticated attackers to generate an impersonation link that will allow them to log in as any existing user, such as an administrator. NOTE: The user impersonation feature was disabled in version 1.1.0 and re-enabled with a patch in version 1.1.2.
The AdForest theme for WordPress is vulnerable to authentication bypass in all versions up to, and including, 5.1.6. This is due to the plugin not properly verifying a user's identity prior to authenticating them through the sb_login_user_with_otp_fun() function. This makes it possible for unauthenticated attackers to log in as arbitrary users, including administrators.
The Relais 2FA plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.0. This is due to incorrect authentication and capability checking in the 'rl_do_ajax' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.
The CE21 Suite plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.2.0. This is due to hardcoded encryption key in the 'ce21_authentication_phrase' function. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.
This vulnerability exists in Matrix Door Controller Cosec Vega FAXQ due to improper implementation of session management at the web-based management interface. A remote attacker could exploit this vulnerability by sending a specially crafted http request on the vulnerable device. Successful exploitation of this vulnerability could allow remote attacker to gain unauthorized access and take complete control of the targeted device.
RSA Archer, versions prior to 6.6 P2 (6.6.0.2), contain an improper authentication vulnerability. The vulnerability allows sysadmins to create user accounts with insufficient credentials. Unauthenticated attackers could gain unauthorized access to the system using those accounts.
Authentication Bypass Using an Alternate Path or Channel vulnerability in AmentoTech Tuturn allows Authentication Abuse.This issue affects Tuturn: from n/a before 3.6.
A potential security vulnerability has been identified in HPE Integrated Lights-Out 5 (iLO 5) and Integrated Lights-Out 6 (iLO 6). The vulnerability could be remotely exploited to allow authentication bypass.
The Spirit Framework plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.2.14. This is due to the custom_actions() function not properly validating a user's identity prior to authenticating them to the site. This makes it possible for unauthenticated attackers to log in as any user, including administrators, granted they have access to the administrator's username.
An attacker can directly request the ProGauge MAGLINK LX CONSOLE resource sub page with full privileges by requesting the URL directly.
An Authentication Bypass issue in CentralSquare Community Development 19.5.7 allows attackers to access the admin panel without admin credentials.
Authentication Bypass Using an Alternate Path or Channel vulnerability in Nuvation Energy Multi-Stack Controller (MSC) allows Authentication Bypass.This issue affects Multi-Stack Controller (MSC): from 2.3.8 before 2.5.1.
Authentication Bypass Using an Alternate Path or Channel vulnerability in Elated-Themes Search & Go search-and-go allows Password Recovery Exploitation.This issue affects Search & Go: from n/a through <= 2.7.
Undisclosed requests may bypass configuration utility authentication, allowing an attacker with network access to the BIG-IP system through the management port and/or self IP addresses to execute arbitrary system commands. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
Authentication Bypass Using an Alternate Path or Channel vulnerability in Yepas Digital Yepas allows Authentication Bypass. This issue affects Digital Yepas: before 1.0.1.
The Social Connect plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.2. This is due to insufficient verification on the OpenID server being supplied during the social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.
Networking OS10, versions prior to October 2021 with Smart Fabric Services enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.
In OpenAirInterface V2.2.0 AMF, Out of sequence messages causes incorrect state transition during UE registration procedure. This allows authentication to be bypassed completely. If a SecurityModeComplete message is sent after InitialUERegistration, a registration reject is received followed by a registration accept! This leads the UE to be registered without proper authentication.
Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.
All programming connections receive the same unlocked privileges, which can result in a privilege escalation. During the time Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 is unlocked by an authorized user, an attacker can connect to the PLC and read the project without authorization.
Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 does not protect against additional software programming connections. An attacker can connect to the PLC while an existing connection is already active.
After Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 is unlocked by an authorized user, the unlocked state does not timeout. If the programming software is interrupted, the PLC remains unlocked. All subsequent programming connections are allowed without authorization. The PLC is only relocked by a power cycle, or when the programming software disconnects correctly.
An issue in JLINK Unionman Technology Co. Ltd Jlink AX1800 v.1.0 allows a remote attacker to execute arbitrary code via the router's authentication mechanism.
An authentication bypass vulnerability has been identified in certain DSL series routers, may allow remote attackers to gain unauthorized access into the affected system. Refer to the 'Security Update for DSL Series Router' section on the ASUS Security Advisory for more information.
FreePBX is an open-source web-based graphical user interface. FreePBX 15, 16, and 17 endpoints are vulnerable due to insufficiently sanitized user-supplied data allowing unauthenticated access to FreePBX Administrator leading to arbitrary database manipulation and remote code execution. This issue has been patched in endpoint versions 15.0.66, 16.0.89, and 17.0.3.
The Case Theme User plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 1.0.3. This is due to the plugin not properly logging in a user with the data that was previously verified through the facebook_ajax_login_callback() function. This makes it possible for unauthenticated attackers to log in as administrative users, as long as they have an existing account on the site which can easily be created by default through the temp user functionality, and access to the administrative user's email.
Mesa Labs AmegaView Versions 3.0 uses default cookies that could be set to bypass authentication to the web application, which may allow an attacker to gain access.
The ZM Ajax Login & Register plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.0.2. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.
SQL injection and file upload attacks are possible due to insufficient validation of input values in some parameters and variables of files compromising Maxboard, which may lead to arbitrary code execution or privilege escalation. Attackers can use these vulnerabilities to perform attacks such as stealing server management rights using a web shell.
In all versions of ABB Power Generation Information Manager (PGIM) and Plant Connect, the affected product is vulnerable to authentication bypass, which may allow an attacker to remotely bypass authentication and extract credentials from the affected device.
The MStore API – Create Native Android & iOS Apps On The Cloud plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 4.14.7. This is due to insufficient verification on the 'phone' parameter of the 'firebase_sms_login' and 'firebase_sms_login_v2' functions. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email address or phone number. Additionally, if a new email address is supplied, a new user account is created with the default role, even if registration is disabled.
Authentication Bypass Using an Alternate Path or Channel vulnerability in NooTheme Jobmonster noo-jobmonster allows Authentication Abuse.This issue affects Jobmonster: from n/a through <= 4.7.9.
The MStore API plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.1.5. This is due to unrestricted access to the 'register' and 'update_user_profile' routes. This makes it possible for unauthenticated attackers to create new administrator accounts, delete existing administrator accounts, or escalate privileges on any account.
The Temporary Login plugin for WordPress is vulnerable to Authentication Bypass in versions up to and including 1.0.0. This is due to improper input validation in the maybe_login_temporary_user() function, which fails to verify that the 'temp-login-token' GET parameter is a scalar string before processing it. When the parameter is supplied as an array, PHP's empty() check is bypassed and sanitize_key() returns an empty string, which is then passed as the meta_value to get_users(). WordPress ignores an empty meta_value and returns all users matching the meta_key '_temporary_login_token', allowing authentication without a valid token. This makes it possible for unauthenticated attackers to authenticate as any active temporary login user by sending a single crafted GET request.
The User Verification by PickPlugins plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 2.0.46. This is due to the use of a loose PHP comparison operator to validate OTP codes in the "user_verification_form_wrap_process_otpLogin" function. This makes it possible for unauthenticated attackers to log in as any user with a verified email address, such as an administrator, by submitting a "true" OTP value.
Mitigation bypass in the DOM: Security component. This vulnerability was fixed in Firefox 150, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10.
Mitigation bypass in the Networking: Cookies component. This vulnerability was fixed in Firefox 150 and Thunderbird 150.
Mitigation bypass in the Networking: Cookies component. This vulnerability was fixed in Firefox 150 and Thunderbird 150.