A security vulnerability has been identified in HPE StoreServ Management Console (SSMC). An authenticated SSMC administrator could exploit the vulnerability to inject code and elevate their privilege in SSMC. The scope of this vulnerability is limited to SSMC. Note: The arrays being managed are not impacted by this vulnerability. This vulnerability impacts SSMC versions 3.4 GA to 3.8.1.

Multiple buffer overflow security vulnerabilities have been identified in HPE iLO Amplifier Pack version(s): Prior to 2.12. These vulnerabilities could be exploited by a highly privileged user to remotely execute code that could lead to a loss of confidentiality, integrity, and availability. HPE has provided a software update to resolve this vulnerability in HPE iLO Amplifier Pack.

An authenticated vulnerability has been identified allowing an attacker to effectively establish highly privileged persistent arbitrary code execution across boot cycles.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows VisualRF remote OS command execution and file disclosure by administrative users.

Aruba AirWave before 7.7.14.2 and 8.x before 8.0.7 allows administrative users to escalate privileges to root on the underlying OS.

A potential security vulnerability has been identified in multiple HP products and versions which involves possible execution of arbitrary code during boot services that can result in elevation of privilege. The EFI_BOOT_SERVICES structure might be overwritten by an attacker to execute arbitrary SMM (System Management Mode) code. A list of affected products and versions are available in https://support.hp.com/rs-en/document/c06456250.

Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple authenticated command injection vulnerabilities exist in the Aruba InstantOS and ArubaOS 10 command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A remote sql information disclosure vulnerability in HPE Network Automation version 9.1x, 9.2x, 10.0x, 10.1x and 10.2x were found.

A remote sql injection authentication bypass in HPE Network Automation version 9.1x, 9.2x, 10.0x, 10.1x and 10.2x were found.

A remote sql injection vulnerability in HPE Network Automation version 9.1x, 9.2x, 10.0x, 10.1x and 10.2x were found.

SQL injection vulnerability in HP Network Automation 7.2x, 7.5x, 7.6x, 9.0, and 9.10 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors.

An SQL Injection vulnerability in HP ArcSight ESM and HP ArcSight ESM Express, in any 6.x version prior to 6.9.1c Patch 4 or 6.11.0 Patch 1. This vulnerability could be exploited remotely to allow SQL injection.

IBM Sterling B2B Integrator Standard Edition 6.0.0.0 through 6.0.3.5, 6.1.0.0 through 6.1.0.4, and 6.1.1.0 through 6.1.1.1 is vulnerable to SQL injection. A remote attacker could send specially crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 215888.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

SQL Injection in HP Network Operations Management Ultimate, version 2017.07, 2017.11, 2018.02 and in Network Automation, version 10.00, 10.10, 10.11, 10.20, 10.30, 10.40, 10.50. This vulnerability could be remotely exploited to allow Remote SQL Injection.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

SQL injection vulnerability in HP Intelligent Management Center (iMC) and HP IMC Service Operation Management Software Module allows remote attackers to execute arbitrary SQL commands via unspecified vectors, aka ZDI-CAN-1664.

Multiple SQL injection vulnerabilities in GetEventsServlet in HP ProCurve Manager (PCM) 3.20 and 4.0, PCM+ 3.20 and 4.0, and Identity Driven Manager (IDM) 4.0 allow remote attackers to execute arbitrary SQL commands via the (1) sort or (2) dir parameter.

SQL injection vulnerability in HP Performance Insight for Networks 5.3.x, 5.41, 5.41.001, and 5.41.002 allows remote attackers to execute arbitrary SQL commands via unspecified vectors.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A SQL injection code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

Security vulnerabilities in HPE IceWall SSO 10.0 certd could be exploited remotely to allow SQL injection or unauthorized data injection. HPE has provided the following updated modules to resolve these vulnerabilities. HPE IceWall SSO version 10.0 certd library Patch 9 for RHEL and HPE IceWall SSO version 10.0 certd library Patch 9 for HP-UX.

A vulnerability classified as critical has been found in SourceCodester Petrol Pump Management Software 1.0. This affects an unknown part of the file /admin/app/login_crud.php. The manipulation of the argument email leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-255375.

Cscms Music Portal System v4.2 was discovered to contain a SQL injection vulnerability via the component dance_Lists.php_zhuan.

A high privileged remote attacker can alter the configuration database via POST requests due to improper neutralization of special elements used in a SQL statement.

Cscms Music Portal System v4.2 was discovered to contain a SQL injection vulnerability via the component dance_Topic.php_del.

Taocms v2.5Beta5 was discovered to contain a blind SQL injection vulnerability via the function Article Search.

The Post Content XMLRPC WordPress plugin through 1.0 does not sanitise or escape multiple GET/POST parameters before using them in SQL statements in the admin dashboard, leading to an authenticated SQL Injections

The Check & Log Email WordPress plugin before 1.0.3 does not validate and escape the "order" and "orderby" GET parameters before using them in a SQL statement when viewing logs, leading to SQL injections issues

The Timeline Calendar WordPress plugin through 1.2 does not sanitise, validate or escape the edit GET parameter before using it in a SQL statement when editing events, leading to an authenticated SQL injection issue. Other SQL Injections are also present in the plugin

The Sync WooCommerce Product feed to Google Shopping WordPress plugin through 1.2.4 uses the 'feed_id' POST parameter which is not properly sanitized for use in a SQL statement, leading to a SQL injection vulnerability in the admin dashboard

The Ninja Forms Contact Form WordPress plugin before 3.6.4 does not escape keys of the fields POST parameter, which could allow high privilege users to perform SQL injections attacks

The get_reports() function in the Secure Copy Content Protection and Content Locking WordPress plugin before 2.6.7 did not use whitelist or validate the orderby parameter before using it in SQL statements passed to the get_results() DB calls, leading to SQL injection issues in the admin dashboard

The Export Users With Meta WordPress plugin before 0.6.5 did not escape the list of roles to export before using them in a SQL statement in the export functionality, available to admins, leading to an authenticated SQL Injection.

A vulnerability classified as critical was found in SourceCodester Petrol Pump Management Software 1.0. This vulnerability affects unknown code of the file /admin/edit_supplier.php. The manipulation of the argument id leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-255376.

The Quotes Collection WordPress plugin through 2.5.2 does not validate and escape the bulkcheck parameter before using it in a SQL statement, leading to a SQL injection

The Game Server Status WordPress plugin through 1.0 does not validate or escape the server_id parameter before using it in SQL statement, leading to an Authenticated SQL Injection in an admin page

The Affiliates Manager WordPress plugin before 2.8.7 does not validate the orderby parameter before using it in an SQL statement in the admin dashboard, leading to an SQL Injection issue