An issue in the helper tool of Mailbutler GmbH Shimo VPN Client for macOS v5.0.4 allows attackers to bypass authentication via PID re-use.

Dell iDRAC9 versions 5.00.00.00 and later but prior to 5.10.10.00, contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access to the VNC Console.

An incorrect check in the component cdr.php of Voipmonitor GUI before v24.96 allows unauthenticated attackers to escalate privileges via a crafted request.

Because of unauthenticated password changes in ForLogic Qualiex v1 and v3, customer and admin permissions and data can be accessed via a simple request.

A vulnerability has been identified in Mendix SAML (Mendix 7 compatible) (All versions >= V1.17.3 < V1.18.0), Mendix SAML (Mendix 7 compatible) (All versions >= V1.16.4 < V1.17.3), Mendix SAML (Mendix 8 compatible) (All versions >= V2.3.0 < V2.4.0), Mendix SAML (Mendix 8 compatible) (All versions >= V2.2.0 < V2.3.0), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.3.1 < V3.6.1), Mendix SAML (Mendix 9 latest compatible, New Track) (All versions >= V3.1.9 < V3.3.1), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.3.0 < V3.6.0), Mendix SAML (Mendix 9 latest compatible, Upgrade Track) (All versions >= V3.1.8 < V3.3.0), Mendix SAML (Mendix 9.12/9.18 compatible, New Track) (All versions >= V3.3.1 < V3.3.15), Mendix SAML (Mendix 9.12/9.18 compatible, Upgrade Track) (All versions >= V3.3.0 < V3.3.14), Mendix SAML (Mendix 9.6 compatible, New Track) (All versions >= V3.1.9 < V3.2.7), Mendix SAML (Mendix 9.6 compatible, Upgrade Track) (All versions >= V3.1.8 < V3.2.6). The affected versions of the module insufficiently verify the SAML assertions. This could allow unauthenticated remote attackers to bypass authentication and get access to the application. This CVE entry describes the incomplete fix for CVE-2023-25957 in a specific non default configuration.

Versions of INEA ME RTU firmware 3.36b and prior do not require authentication to the "root" account on the host system of the device. This could allow an attacker to obtain admin-level access to the host system.

This vulnerability allows remote attackers to bypass authentication on affected installations of BMC Track-It! 20.21.01.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the authorization of HTTP requests. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-14618.

Microsoft Dynamics 365 Business Central Elevation of Privilege Vulnerability

An issue was discovered in Joomla! 2.5.0 through 3.10.6 & 4.0.0 through 4.1.0. A user row was not bound to a specific authentication mechanism which could under very special circumstances allow an account takeover.

Remote code execution vulnerability due to insufficient user privilege verification in reverseWall-MDS. Remote attackers can exploit the vulnerability such as stealing account, through remote code execution.

Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as messages in public topics. The backend also sends commands to the vehicles as MQTT posts in public topics. As a result, an attacker can access the confidential data of the entire fleet that is managed by the backend. - The MQTT messages sent by the vehicles or the backend are not encrypted or authenticated. An attacker can create and post messages to impersonate a vehicle or the backend. The attacker could then, for example, send incorrect information to the backend about the vehicle's location. - The backend can inject data into a vehicle´s CAN bus by sending a specific MQTT message on a public topic. Because these messages are not authenticated or encrypted, an attacker could impersonate the backend, create a fake message and inject CAN data in any vehicle managed by the backend. The confirmed version is 201808021036, however further versions have been also identified as potentially impacted.

Improper Authentication vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Bypass.This issue affects upKeeper Manager: through 5.1.9.

TeslaMate before 1.25.1 (when using the default Docker configuration) allows attackers to open doors of Tesla vehicles, start Keyless Driving, and interfere with vehicle operation en route. This occurs because an attacker can leverage Grafana login access to obtain a token for Tesla API calls.

An insufficient authorization vulnerability in web component of EPMM prior to 12.1.0.1 allows an unauthorized attacker within the network to execute arbitrary commands on the underlying operating system of the appliance.

Sysaid – Sysaid System Takeover - An attacker can bypass the authentication process by accessing to: /wmiwizard.jsp, Then to: /ConcurrentLogin.jsp, then click on the login button, and it will redirect you to /home.jsp without any authentication.

Osprey Pump Controller version 1.01 could allow an unauthenticated user to create an account and bypass authentication, thereby gaining unauthorized access to the system. A threat actor could exploit this vulnerability to create a user account without providing valid credentials. A threat actor who successfully exploits this vulnerability could gain access to the pump controller and cause disruption in operation, modify data, or shut down the controller.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from an authentication bypass vulnerability, where a special username with a deterministic password can be leveraged to bypass authentication checks and execute OS commands as the root user.

VMware Workspace ONE Access has two authentication bypass vulnerabilities (CVE-2022-22955 & CVE-2022-22956) in the OAuth2 ACS framework. A malicious actor may bypass the authentication mechanism and execute any operation due to exposed endpoints in the authentication framework.

An issue in Ocuco Innovation - REPORTS.EXE v2.10.24.13 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

An issue in WooCommerce Payments plugin for WordPress (versions 5.6.1 and lower) allows an unauthenticated attacker to send requests on behalf of an elevated user, like administrator. This allows a remote, unauthenticated attacker to gain admin access on a site that has the affected version of the plugin activated.

An issue was discovered in Servisnet Tessa 0.0.2. An attacker can add a new sysadmin user via a manipulation of the Authorization HTTP header.

Improper authentication in the Intel(R) Edge Insights for Industrial software before version 2.6.1 may allow an unauthenticated user to potentially enable escalation of privilege via network access.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

maddy is a composable, all-in-one mail server. Starting with version 0.2.0 and prior to version 0.6.3, maddy allows a full authentication bypass if SASL authorization username is specified when using the PLAIN authentication mechanisms. Instead of validating the specified username, it is accepted as is after checking the credentials for the authentication username. maddy 0.6.3 includes the fix for the bug. There are no known workarounds.

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.

**UNSUPPORTED WHEN ASSIGNED** An issue was discovered in BMC Remedy Mid Tier 7.6.04. An unauthenticated remote attacker is able to access any user account without using any password. NOTE: This vulnerability only affects products that are no longer supported by the maintainer and the impacted version for this vulnerability is 7.6.04 only.

Teltonika’s Remote Management System versions 4.14.0 is vulnerable to an unauthorized attacker registering previously unregistered devices through the RMS platform. If the user has not disabled the "RMS management feature" enabled by default, then an attacker could register that device to themselves. This could enable the attacker to perform different operations on the user's devices, including remote code execution with 'root' privileges (using the 'Task Manager' feature on RMS).

In S+ Operations and S+ History, it is possible that an unauthenticated user could inject values to the Operations History server (or standalone S+ History server) and ultimately write values to the controlled process.

AVE DOMINAplus <=1.10.x suffers from an authentication bypass vulnerability due to missing control check when directly calling the autologin GET parameter in changeparams.php script. Setting the autologin value to 1 allows an unauthenticated attacker to permanently disable the authentication security control and access the management interface with admin privileges without providing credentials.

Use of default password vulnerability in PowerPanel Business Local/Remote for Windows v4.8.6 and earlier, PowerPanel Business Management for Windows v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 32bit v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 64bit v4.8.6 and earlier, PowerPanel Business Management for Linux 32bit v4.8.6 and earlier, PowerPanel Business Management for Linux 64bit v4.8.6 and earlier, PowerPanel Business Local/Remote for MacOS v4.8.6 and earlier, and PowerPanel Business Management for MacOS v4.8.6 and earlier allows remote attackers to log in to the server directly to perform administrative functions. Upon installation or upon first login, the application does not ask the user to change the 'admin' password.

An authentication bypass vulnerability exists in the httpd nvram.cgi functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.

The system application (com.transsion.kolun.aiservice) component does not perform an authentication check, which allows attackers to perform malicious exploitations and affect system services.

The RegistrationMagic plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.2.1.0. This is due to insufficient verification on the user being supplied during a Google social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

Priority Web version 19.1.0.68, parameter manipulation on an unspecified end-point may allow authentication bypass.

login.php in Zenas PaoBacheca Guestbook 2.1, when register_globals is enabled, allows remote attackers to bypass authentication and gain administrative access by setting the login_ok parameter to 1.

Use of Password Hash Instead of Password for Authentication in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows an unprivileged remote attacker to use a password hash instead of an actual password to login to a valid user account via the REST interface.

** UNSUPPORTED WHEN ASSIGNED ** Improper Authentication vulnerability in Apache Submarine Commons Utils. If the user doesn't explicitly set `submarine.auth.default.secret`, a default value will be used. This issue affects Apache Submarine Commons Utils: from 0.8.0. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

The Profile Builder – User Profile & User Registration Forms plugin for WordPress is vulnerable to unauthorized password resets in versions up to, and including 3.9.0. This is due to the plugin using native password reset functionality, with insufficient validation on the password reset function (wppb_front_end_password_recovery). The function uses the plaintext value of a password reset key instead of a hashed value which means it can easily be retrieved and subsequently used. An attacker can leverage CVE-2023-0814, or another vulnerability like SQL Injection in another plugin or theme installed on the site to successfully exploit this vulnerability.

An access control issue in H3C A210-G A210-GV100R005 allows attackers to authenticate without a password.

Broken Authentication vulnerability in SoftLab Integrate Google Drive.This issue affects Integrate Google Drive: from n/a through 1.3.93.

TP-Link SG105PE firmware prior to 'TL-SG105PE(UN) 1.0_1.0.0 Build 20221208' contains an authentication bypass vulnerability. Under the certain conditions, an attacker may impersonate an administrator of the product. As a result, information may be obtained and/or the product's settings may be altered with the privilege of the administrator.

Broken Authentication vulnerability discovered in OpenText™ iManager 3.2.6.0200. This vulnerability allows an attacker to manipulate certain parameters to bypass authentication.

By using a specific credential string, an attacker with network access to the device’s web interface could circumvent the authentication scheme and perform administrative operations.

admin.php in phpMyBlockchecker 1.0.0055 allows remote attackers to bypass authentication and gain administrative access by setting the PHPMYBCAdmin cookie to LOGGEDIN.

The Linux-PAM package before 1.5.2-6.1 for openSUSE Tumbleweed allows authentication bypass for SSH logins. The pam_access.so module doesn't correctly restrict login if a user tries to connect from an IP address that is not resolvable via DNS. In such conditions, a user with denied access to a machine can still get access. NOTE: the relevance of this issue is largely limited to openSUSE Tumbleweed and openSUSE Factory; it does not affect Linux-PAM upstream.

The ZM Ajax Login & Register plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.0.2. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the username.

cpanel/login.php in EgyPlus 7ammel (aka 7ml) 1.0.1 and earlier sends a redirect to the web browser but does not exit when the supplied credentials are incorrect, which allows remote attackers to bypass authentication by providing arbitrary username and password parameters.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.