A command injection vulnerability in the version parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the host_time parameter in the NTPSyncWithHost function.

A command injection vulnerability in the ip parameter in the function recvSlaveUpgstatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

D-Link DIR-822+ V1.0.5 was found to contain a command injection in ftext function of upload_firmware.cgi, which allows remote attackers to execute arbitrary commands via shell.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the country parameter at setting/delStaticDhcpRules.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingTimeOut parameter in the setNetworkDiag function.

TOTOLINK T8 V4.1.5cu was discovered to contain a command injection vulnerability via the slaveIpList parameter in the function setUpgradeFW.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the webWlanIdx parameter in the setWebWlanIdx function.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagHost parameter in the setNetworkDiag function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the FileName parameter in the setUploadUserData function.

Linksys E5600 v1.1.0.26 was discovered to contain a command injection vulnerability via the ipurl parameter at /API/info form endpoint.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the admuser parameter in the setPasswordCfg function.

TOTOlink A7100RU(V7.4cu.2313_B20191024) was discovered to contain a command injection vulnerability via the province parameter at setting/delStaticDhcpRules.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagTracertHop parameter in the setNetworkDiag function.

A command injection vulnerability in the ip parameter in the function recvSlaveCloudCheckStatus of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the hour parameter in the setRebootScheCfg function.

A command injection vulnerability in the serverIp parameter in the function updateWifiInfo of TOTOLINK T8 V4.1.5cu allows attackers to execute arbitrary commands via a crafted MQTT packet.

Advanced Secure Gateway and Content Analysis, prior to 7.3.13.1 / 3.1.6.0, may be susceptible to a Command Injection vulnerability.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the NetDiagPingSize parameter in the setNetworkDiag function.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a command injection vulnerability via the plugin_version parameter in the setUnloadUserData function.

Command Injection vulnerability in D-Link Dir 816 with firmware version DIR-816_A2_v1.10CNB04 allows attackers to run arbitrary commands via the urlAdd parameter.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

Ghidra/RuntimeScripts/Linux/support/launch.sh in NSA Ghidra through 10.2.2 passes user-provided input into eval, leading to command injection when calling analyzeHeadless with untrusted input.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: Multimedia Console 2.1.2 ( 2023/05/04 ) and later Multimedia Console 1.4.8 ( 2023/05/05 ) and later QTS 5.1.0.2399 build 20230515 and later QTS 4.3.6.2441 build 20230621 and later QTS 4.3.4.2451 build 20230621 and later QTS 4.3.3.2420 build 20230621 and later QTS 4.2.6 build 20230621 and later Media Streaming add-on 500.1.1.2 ( 2023/06/12 ) and later Media Streaming add-on 500.0.0.11 ( 2023/06/16 ) and later

DEK-1705 <=Firmware:34.23.1 device was discovered to have a command execution vulnerability.

Certain Tenda products are vulnerable to command injection. This affects Tenda CP7 Tenda CP7<=V11.10.00.2211041403 and Tenda CP3 v.10 Tenda CP3 v.10<=V20220906024_2025 and Tenda IT7-PCS Tenda IT7-PCS<=V2209020914 and Tenda IT7-LCS Tenda IT7-LCS<=V2209020914 and Tenda IT7-PRS Tenda IT7-PRS<=V2209020908.

Kohya_ss is a GUI for Kohya's Stable Diffusion trainers. Kohya_ss is vulnerable to a command injection in `git_caption_gui.py`. This vulnerability is fixed in 23.1.5.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability in Apache Software Foundation Apache Airflow, Apache Software Foundation Apache Airflow MySQL Provider.This issue affects Apache Airflow: before 2.5.1; Apache Airflow MySQL Provider: before 4.0.0.

There is a command injection vulnerability in SolarView Compact through 6.00, attackers can execute commands by bypassing internal restrictions through downloader.php.

Kohya_ss is a GUI for Kohya's Stable Diffusion trainers. Kohya_ss v22.6.1 is vulnerable to command injection in `finetune_gui.py` This vulnerability is fixed in 23.1.5.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

There are multiple command injection vulnerabilities that could lead to unauthenticated remote code execution by sending specially crafted packets destined to the PAPI (Aruba Networks access point management protocol) UDP port (8211). Successful exploitation of these vulnerabilities result in the ability to execute arbitrary code as a privileged user on the underlying operating system.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain a command injection vulnerability via the 'port' parameter in the setSSServer function at /cgi-bin/cstecgi.cgi.

Brackets versions 1.14 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

pgAdmin <= 8.4 is affected by a Remote Code Execution (RCE) vulnerability through the validate binary path API. This vulnerability allows attackers to execute arbitrary code on the server hosting PGAdmin, posing a severe risk to the database management system's integrity and the security of the underlying data.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM_LXA.ASP'.

Operating system command injection vulnerability in AndSoft's e-TMS v25.03. This vulnerability allows an attacker to execute operating system commands on the server by sending a POST request. The relationship between parameter and assigned identifier is a 'm' parameter in '/clt/LOGINFRM.ASP'.

Adobe Acrobat and Reader versions 2019.012.20035 and earlier, 2019.012.20035 and earlier, 2017.011.30142 and earlier, 2017.011.30143 and earlier, 2015.006.30497 and earlier, and 2015.006.30498 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution .

Aria Operations for Networks contains a command injection vulnerability. A malicious actor with network access to VMware Aria Operations for Networks may be able to perform a command injection attack resulting in remote code execution.

An issue in Intelbras RX1500 v2.2.9 and RX3000 v1.0.11 allows unauthenticated attackers to execute arbitrary code via injecting a crafted payload into the ESSID name when creating a network.

A vulnerability, which was classified as critical, was found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. Affected is an unknown function of the component Static Routing Configuration Handler. The manipulation of the argument next-hop-interface leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. VDB-223302 is the identifier assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

A vulnerability, which was classified as critical, has been found in Ubiquiti EdgeRouter X 2.0.9-hotfix.6. This issue affects some unknown processing of the component NAT Configuration Handler. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier VDB-223301 was assigned to this vulnerability. NOTE: The vendor position is that post-authentication issues are not accepted as vulnerabilities.

Command Injection in GitHub repository microweber/microweber prior to 1.3.3.

A pre-auth command injection vulnerability in the warn-proceed handler of Sophos Web Appliance older than version 4.3.10.4 allows execution of arbitrary code.

Distrobox before 1.7.0.1 allows attackers to execute arbitrary code via command injection into exported executables.

An issue was identified in GitLab CE/EE affecting all versions from 1.0 prior to 15.8.5, 15.9 prior to 15.9.4, and 15.10 prior to 15.10.1 where non-printable characters gets copied from clipboard, allowing unexpected commands to be executed on victim machine.

Adobe Experience Manager versions 6.5, 6.4, 6.3 and 6.2 have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.