In the Linux kernel, the following vulnerability has been resolved: mt76: fix tx status related use-after-free race on station removal There is a small race window where ongoing tx activity can lead to a skb getting added to the status tracking idr after that idr has already been cleaned up, which will keep the wcid linked in the status poll list. Fix this by only adding status skbs if the wcid pointer is still assigned in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove

In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix errorenous cleanup order There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync.

In the Linux kernel, the following vulnerability has been resolved: btrfs: always report error in run_one_delayed_ref() Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but if end users hit such problem, there will be no chance that btrfs_debug() is enabled. This can lead to very little useful info for debugging. This patch will: - Add extra info for error reporting Including: * logical bytenr * num_bytes * type * action * ref_mod - Replace the btrfs_debug() with btrfs_err() - Move the error reporting into run_one_delayed_ref() This is to avoid use-after-free, the @node can be freed in the caller. This error should only be triggered at most once. As if run_one_delayed_ref() failed, we trigger the error message, then causing the call chain to error out: btrfs_run_delayed_refs() `- btrfs_run_delayed_refs() `- btrfs_run_delayed_refs_for_head() `- run_one_delayed_ref() And we will abort the current transaction in btrfs_run_delayed_refs(). If we have to run delayed refs for the abort transaction, run_one_delayed_ref() will just cleanup the refs and do nothing, thus no new error messages would be output.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_timeout | pn532_uart_send_frame | pn532->... //USE This patch adds del_timer_sync() in pn532_uart_remove() in order to prevent the use-after-free bugs. What's more, the pn53x_unregister_nfc() is well synchronized, it sets nfc_dev->shutting_down to true and there are no syscalls could restart the cmd_timeout timer.

In the Linux kernel, the following vulnerability has been resolved: rapidio: fix possible UAF when kfifo_alloc() fails If kfifo_alloc() fails in mport_cdev_open(), goto err_fifo and just free priv. But priv is still in the chdev->file_list, then list traversal may cause UAF. This fixes the following smatch warning: drivers/rapidio/devices/rio_mport_cdev.c:1930 mport_cdev_open() warn: '&priv->list' not removed from list

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix use after free bugs _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them.

In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: Fix a use-after-free bug in open If someone cancels the open RPC call, then we must not try to free either the open slot or the layoutget operation arguments, since they are likely still in use by the hung RPC call.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix possible use-after-free issue in ftrace_location() KASAN reports a bug: BUG: KASAN: use-after-free in ftrace_location+0x90/0x120 Read of size 8 at addr ffff888141d40010 by task insmod/424 CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+ [...] Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcf/0x610 kasan_report+0xb5/0xe0 ftrace_location+0x90/0x120 register_kprobe+0x14b/0xa40 kprobe_init+0x2d/0xff0 [kprobe_example] do_one_initcall+0x8f/0x2d0 do_init_module+0x13a/0x3c0 load_module+0x3082/0x33d0 init_module_from_file+0xd2/0x130 __x64_sys_finit_module+0x306/0x440 do_syscall_64+0x68/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 The root cause is that, in lookup_rec(), ftrace record of some address is being searched in ftrace pages of some module, but those ftrace pages at the same time is being freed in ftrace_release_mod() as the corresponding module is being deleted: CPU1 | CPU2 register_kprobes() { | delete_module() { check_kprobe_address_safe() { | arch_check_ftrace_location() { | ftrace_location() { | lookup_rec() // USE! | ftrace_release_mod() // Free! To fix this issue: 1. Hold rcu lock as accessing ftrace pages in ftrace_location_range(); 2. Use ftrace_location_range() instead of lookup_rec() in ftrace_location(); 3. Call synchronize_rcu() before freeing any ftrace pages both in ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().

In the Linux kernel, the following vulnerability has been resolved: writeback: avoid use-after-free after removing device When a disk is removed, bdi_unregister gets called to stop further writeback and wait for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation dwork after this has completed, which can result in the timer attempting to access the just freed bdi_writeback. Fix this by checking if the bdi_writeback is alive, similar to when scheduling writeback work. Since this requires wb->work_lock, and wb_inode_writeback_end() may get called from interrupt, switch wb->work_lock to an irqsafe lock.

In the Linux kernel, the following vulnerability has been resolved: sfc: fix use after free when disabling sriov Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix KASAN use-after-free Read in compute_effective_progs Syzbot found a Use After Free bug in compute_effective_progs(). The reproducer creates a number of BPF links, and causes a fault injected alloc to fail, while calling bpf_link_detach on them. Link detach triggers the link to be freed by bpf_link_free(), which calls __cgroup_bpf_detach() and update_effective_progs(). If the memory allocation in this function fails, the function restores the pointer to the bpf_cgroup_link on the cgroup list, but the memory gets freed just after it returns. After this, every subsequent call to update_effective_progs() causes this already deallocated pointer to be dereferenced in prog_list_length(), and triggers KASAN UAF error. To fix this issue don't preserve the pointer to the prog or link in the list, but remove it and replace it with a dummy prog without shrinking the table. The subsequent call to __cgroup_bpf_detach() or __cgroup_bpf_detach() will correct it.

In the Linux kernel, the following vulnerability has been resolved: ath9k: fix use-after-free in ath9k_hif_usb_rx_cb Syzbot reported use-after-free Read in ath9k_hif_usb_rx_cb() [0]. The problem was in incorrect htc_handle->drv_priv initialization. Probable call trace which can trigger use-after-free: ath9k_htc_probe_device() /* htc_handle->drv_priv = priv; */ ath9k_htc_wait_for_target() <--- Failed ieee80211_free_hw() <--- priv pointer is freed <IRQ> ... ath9k_hif_usb_rx_cb() ath9k_hif_usb_rx_stream() RX_STAT_INC() <--- htc_handle->drv_priv access In order to not add fancy protection for drv_priv we can move htc_handle->drv_priv initialization at the end of the ath9k_htc_probe_device() and add helper macro to make all *_STAT_* macros NULL safe, since syzbot has reported related NULL deref in that macros [1]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Discard command completions in internal error Fix use after free when FW completion arrives while device is in internal error state. Avoid calling completion handler in this case, since the device will flush the command interface and trigger all completions manually. Kernel log: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0xd8/0xe0 ... Call Trace: <IRQ> ? __warn+0x79/0x120 ? refcount_warn_saturate+0xd8/0xe0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? refcount_warn_saturate+0xd8/0xe0 cmd_ent_put+0x13b/0x160 [mlx5_core] mlx5_cmd_comp_handler+0x5f9/0x670 [mlx5_core] cmd_comp_notifier+0x1f/0x30 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 mlx5_eq_async_int+0xf6/0x290 [mlx5_core] notifier_call_chain+0x35/0xb0 atomic_notifier_call_chain+0x16/0x20 irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x4b/0x160 handle_irq_event+0x2e/0x80 handle_edge_irq+0x98/0x230 __common_interrupt+0x3b/0xa0 common_interrupt+0x7b/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ==================================================================

In the Linux kernel, the following vulnerability has been resolved: net: sched: fix use-after-free in taprio_change() In 'taprio_change()', 'admin' pointer may become dangling due to sched switch / removal caused by 'advance_sched()', and critical section protected by 'q->current_entry_lock' is too small to prevent from such a scenario (which causes use-after-free detected by KASAN). Fix this by prefer 'rcu_replace_pointer()' over 'rcu_assign_pointer()' to update 'admin' immediately before an attempt to schedule freeing.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref().

The JIT created incorrect code for arguments in certain cases. This led to potential use-after-free crashes during garbage collection. This vulnerability affects Firefox < 125, Firefox ESR < 115.10, and Thunderbird < 115.10.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix a window for use-after-free During a destroy CQ an interrupt may cause processing of a CQE after CQ resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is called under the cq_lock.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/disp/dpu1: set vbif hw config to NULL to avoid use after memory free during pm runtime resume BUG: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6be3 Call trace: dpu_vbif_init_memtypes+0x40/0xb8 dpu_runtime_resume+0xcc/0x1c0 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x134/0x258 __rpm_callback+0x98/0x138 rpm_callback+0x30/0x88 rpm_resume+0x36c/0x49c __pm_runtime_resume+0x80/0xb0 dpu_core_irq_uninstall+0x30/0xb0 dpu_irq_uninstall+0x18/0x24 msm_drm_uninit+0xd8/0x16c Patchwork: https://patchwork.freedesktop.org/patch/483255/ [DB: fixed Fixes tag]

In the Linux kernel, the following vulnerability has been resolved: aoe: fix the potential use-after-free problem in more places For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put() instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs into use-after-free. Then Nicolai Stange found more places in aoe have potential use-after-free problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe() and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push packet to tx queue. So they should also use dev_hold() to increase the refcnt of skb->dev. On the other hand, moving dev_put() to tx() causes that the refcnt of skb->dev be reduced to a negative value, because corresponding dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(), probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.

In the Linux kernel, the following vulnerability has been resolved: ionic: fix use after netif_napi_del() When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix potential glock use-after-free on unmount When a DLM lockspace is released and there ares still locks in that lockspace, DLM will unlock those locks automatically. Commit fb6791d100d1b started exploiting this behavior to speed up filesystem unmount: gfs2 would simply free glocks it didn't want to unlock and then release the lockspace. This didn't take the bast callbacks for asynchronous lock contention notifications into account, which remain active until until a lock is unlocked or its lockspace is released. To prevent those callbacks from accessing deallocated objects, put the glocks that should not be unlocked on the sd_dead_glocks list, release the lockspace, and only then free those glocks. As an additional measure, ignore unexpected ast and bast callbacks if the receiving glock is dead.

In the Linux kernel, the following vulnerability has been resolved: spi: tegra20-slink: fix UAF in tegra_slink_remove() After calling spi_unregister_master(), the refcount of master will be decrease to 0, and it will be freed in spi_controller_release(), the device data also will be freed, so it will lead a UAF when using 'tspi'. To fix this, get the master before unregister and put it when finish using it.

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.

In the Linux kernel, the following vulnerability has been resolved: drbd: use after free in drbd_create_device() The drbd_destroy_connection() frees the "connection" so use the _safe() iterator to prevent a use after free.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix UAF in ieee80211_scan_rx() ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done().

In the Linux kernel, the following vulnerability has been resolved: NFSD: fix use-after-free on source server when doing inter-server copy Use-after-free occurred when the laundromat tried to free expired cpntf_state entry on the s2s_cp_stateids list after inter-server copy completed. The sc_cp_list that the expired copy state was inserted on was already freed. When COPY completes, the Linux client normally sends LOCKU(lock_state x), FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server. The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state from the s2s_cp_stateids list before freeing the lock state's stid. However, sometimes the CLOSE was sent before the FREE_STATEID request. When this happens, the nfsd4_close_open_stateid call from nfsd4_close frees all lock states on its st_locks list without cleaning up the copy state on the sc_cp_list list. When the time the FREE_STATEID arrives the server returns BAD_STATEID since the lock state was freed. This causes the use-after-free error to occur when the laundromat tries to free the expired cpntf_state. This patch adds a call to nfs4_free_cpntf_statelist in nfsd4_close_open_stateid to clean up the copy state before calling free_ol_stateid_reaplist to free the lock state's stid on the reaplist.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix buffer copy overflow of ztailpacking feature I got some KASAN report as below: [ 46.959738] ================================================================== [ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188 ... [ 46.960430] Call Trace: [ 46.960430] <TASK> [ 46.960430] dump_stack_lvl+0x41/0x5e [ 46.960430] print_report.cold+0xb2/0x6b7 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_report+0x8a/0x140 [ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] kasan_check_range+0x14d/0x1d0 [ 46.960430] memcpy+0x20/0x60 [ 46.960430] z_erofs_shifted_transform+0x2bd/0x370 [ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080 The root cause is that the tail pcluster won't be a complete filesystem block anymore. So if ztailpacking is used, the second part of an uncompressed tail pcluster may not be ``rq->pageofs_out``.

In the Linux kernel, the following vulnerability has been resolved: android: binder: stop saving a pointer to the VMA Do not record a pointer to a VMA outside of the mmap_lock for later use. This is unsafe and there are a number of failure paths *after* the recorded VMA pointer may be freed during setup. There is no callback to the driver to clear the saved pointer from generic mm code. Furthermore, the VMA pointer may become stale if any number of VMA operations end up freeing the VMA so saving it was fragile to being with. Instead, change the binder_alloc struct to record the start address of the VMA and use vma_lookup() to get the vma when needed. Add lockdep mmap_lock checks on updates to the vma pointer to ensure the lock is held and depend on that lock for synchronization of readers and writers - which was already the case anyways, so the smp_wmb()/smp_rmb() was not necessary. [akpm@linux-foundation.org: fix drivers/android/binder_alloc_selftest.c]

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: Fix use after free in atomisp_alloc_css_stat_bufs() The "s3a_buf" is freed along with all the other items on the "asd->s3a_stats" list. It leads to a double free and a use after free.

In the Linux kernel, the following vulnerability has been resolved: ASoC: sof_es8336: fix possible use-after-free in sof_es8336_remove() sof_es8336_remove() calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself.

In the Linux kernel, the following vulnerability has been resolved: tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink(). Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler(). """ We are seeing a use-after-free from a bpf prog attached to trace_tcp_retransmit_synack. The program passes the req->sk to the bpf_sk_storage_get_tracing kernel helper which does check for null before using it. """ The commit 83fccfc3940c ("inet: fix potential deadlock in reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not to call del_timer_sync() from reqsk_timer_handler(), but it introduced a small race window. Before the timer is called, expire_timers() calls detach_timer(timer, true) to clear timer->entry.pprev and marks it as not pending. If reqsk_queue_unlink() checks timer_pending() just after expire_timers() calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will continue running and send multiple SYN+ACKs until it expires. The reported UAF could happen if req->sk is close()d earlier than the timer expiration, which is 63s by default. The scenario would be 1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(), but del_timer_sync() is missed 2. reqsk timer is executed and scheduled again 3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but reqsk timer still has another one, and inet_csk_accept() does not clear req->sk for non-TFO sockets 4. sk is close()d 5. reqsk timer is executed again, and BPF touches req->sk Let's not use timer_pending() by passing the caller context to __inet_csk_reqsk_queue_drop(). Note that reqsk timer is pinned, so the issue does not happen in most use cases. [1] [0] BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0 Use-after-free read at 0x00000000a891fb3a (in kfence-#1): bpf_sk_storage_get_tracing+0x2e/0x1b0 bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda bpf_trace_run2+0x4c/0xc0 tcp_rtx_synack+0xf9/0x100 reqsk_timer_handler+0xda/0x3d0 run_timer_softirq+0x292/0x8a0 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 intel_idle_irq+0x5a/0xa0 cpuidle_enter_state+0x94/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6 allocated by task 0 on cpu 9 at 260507.901592s: sk_prot_alloc+0x35/0x140 sk_clone_lock+0x1f/0x3f0 inet_csk_clone_lock+0x15/0x160 tcp_create_openreq_child+0x1f/0x410 tcp_v6_syn_recv_sock+0x1da/0x700 tcp_check_req+0x1fb/0x510 tcp_v6_rcv+0x98b/0x1420 ipv6_list_rcv+0x2258/0x26e0 napi_complete_done+0x5b1/0x2990 mlx5e_napi_poll+0x2ae/0x8d0 net_rx_action+0x13e/0x590 irq_exit_rcu+0xf5/0x320 common_interrupt+0x80/0x90 asm_common_interrupt+0x22/0x40 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb freed by task 0 on cpu 9 at 260507.927527s: rcu_core_si+0x4ff/0xf10 irq_exit_rcu+0xf5/0x320 sysvec_apic_timer_interrupt+0x6d/0x80 asm_sysvec_apic_timer_interrupt+0x16/0x20 cpuidle_enter_state+0xfb/0x273 cpu_startup_entry+0x15e/0x260 start_secondary+0x8a/0x90 secondary_startup_64_no_verify+0xfa/0xfb

In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix a UAF bug on the error path of probing When the driver fails in snd_card_register() at probe time, it will free the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug. The following log can reveal it: [ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] [ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0 [ 50.729530] Call Trace: [ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000] Fix this by adding usb_kill_urb() before usb_free_urb().

In the Linux kernel, the following vulnerability has been resolved: media: dvbdev: adopts refcnt to avoid UAF dvb_unregister_device() is known that prone to use-after-free. That is, the cleanup from dvb_unregister_device() releases the dvb_device even if there are pointers stored in file->private_data still refer to it. This patch adds a reference counter into struct dvb_device and delays its deallocation until no pointer refers to the object.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix extent map use-after-free when handling missing device in read_one_chunk Store the error code before freeing the extent_map. Though it's reference counted structure, in that function it's the first and last allocation so this would lead to a potential use-after-free. The error can happen eg. when chunk is stored on a missing device and the degraded mount option is missing. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216721

In the Linux kernel, the following vulnerability has been resolved: sctp: handle the error returned from sctp_auth_asoc_init_active_key When it returns an error from sctp_auth_asoc_init_active_key(), the active_key is actually not updated. The old sh_key will be freeed while it's still used as active key in asoc. Then an use-after-free will be triggered when sending patckets, as found by syzbot: sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112 sctp_set_owner_w net/sctp/socket.c:132 [inline] sctp_sendmsg_to_asoc+0xbd5/0x1a20 net/sctp/socket.c:1863 sctp_sendmsg+0x1053/0x1d50 net/sctp/socket.c:2025 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 This patch is to fix it by not replacing the sh_key when it returns errors from sctp_auth_asoc_init_active_key() in sctp_auth_set_key(). For sctp_auth_set_active_key(), old active_key_id will be set back to asoc->active_key_id when the same thing happens.

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential use-after-free in jbd2_fc_wait_bufs In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count which may lead to use-after-free. So judge buffer if uptodate before put buffer head reference count.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID.

An issue was discovered in the Linux kernel before 5.7. The KVM subsystem allows out-of-range access to memslots after a deletion, aka CID-0774a964ef56. This affects arch/s390/kvm/kvm-s390.c, include/linux/kvm_host.h, and virt/kvm/kvm_main.c.

An issue was discovered in the Linux kernel before 5.8.2. fs/io_uring.c has a use-after-free related to io_async_task_func and ctx reference holding, aka CID-6d816e088c35.

Windows Win32k Elevation of Privilege Vulnerability

In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix a use-after-free Change the LIO port members inside struct srpt_port from regular members into pointers. Allocate the LIO port data structures from inside srpt_make_tport() and free these from inside srpt_make_tport(). Keep struct srpt_device as long as either an RDMA port or a LIO target port is associated with it. This patch decouples the lifetime of struct srpt_port (controlled by the RDMA core) and struct srpt_port_id (controlled by LIO). This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt] Read of size 8 at addr ffff888141cc34b8 by task check/5093 Call Trace: <TASK> show_stack+0x4e/0x53 dump_stack_lvl+0x51/0x66 print_address_description.constprop.0.cold+0xea/0x41e print_report.cold+0x90/0x205 kasan_report+0xb9/0xf0 __asan_load8+0x69/0x90 srpt_enable_tpg+0x31/0x70 [ib_srpt] target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod] configfs_write_iter+0x18b/0x210 new_sync_write+0x1f2/0x2f0 vfs_write+0x3e3/0x540 ksys_write+0xbb/0x140 __x64_sys_write+0x42/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix dangling sco_conn and use-after-free in sco_sock_timeout Connecting the same socket twice consecutively in sco_sock_connect() could lead to a race condition where two sco_conn objects are created but only one is associated with the socket. If the socket is closed before the SCO connection is established, the timer associated with the dangling sco_conn object won't be canceled. As the sock object is being freed, the use-after-free problem happens when the timer callback function sco_sock_timeout() accesses the socket. Here's the call trace: dump_stack+0x107/0x163 ? refcount_inc+0x1c/ print_address_description.constprop.0+0x1c/0x47e ? refcount_inc+0x1c/0x7b kasan_report+0x13a/0x173 ? refcount_inc+0x1c/0x7b check_memory_region+0x132/0x139 refcount_inc+0x1c/0x7b sco_sock_timeout+0xb2/0x1ba process_one_work+0x739/0xbd1 ? cancel_delayed_work+0x13f/0x13f ? __raw_spin_lock_init+0xf0/0xf0 ? to_kthread+0x59/0x85 worker_thread+0x593/0x70e kthread+0x346/0x35a ? drain_workqueue+0x31a/0x31a ? kthread_bind+0x4b/0x4b ret_from_fork+0x1f/0x30

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely.

In the Linux kernel, the following vulnerability has been resolved: net: sched: Fix use after free in red_enqueue() We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue").

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Fix free_irq() on remove Pass the correct dev_id to free_irq() to fix this splat when the driver is unbound: WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq Trying to free already-free IRQ 65 Call Trace: warn_slowpath_fmt free_irq goldfish_tty_remove platform_remove device_remove device_release_driver_internal device_driver_detach unbind_store drv_attr_store ...